Testing the New HDZero SharkByte Video Receiver (Watch in 4K)

[@Mekanikern]

I've had mid air reboots, turned out to be the XT60 pins that were compressed. Pried the pins out a bit, the XT60 felt tighter and no more mid air reboots :)

[@battano]

LOL I got my original Sharkbyte VRX bundled with the 500mW VTX and Camera for $99 on Amazon before the stock shortage and new VRX came out. So glad I jumped on that deal now. I also replaced the patch with ufl to sma connectors and am running VAS Pepperboxes on both with VAS Mad mushroom omni on the upper sma's.

[@mopatop3921]

Really informative, thanks! I always feel it's worth mentioning in videos the really low bitrate of the HDZero DVR, the time-worn phrase of "it looks better in the goggles" applies very strongly to HDZero. The best representation of the video is to use a video capture passthrough setup, which is obviously quite hard to do in the field.

[@MrShutterBug]

The DVR bitrate actually isn’t too bad. It is mainly the KZbin compression that kills it, but it does look better if you set KZbin to 4K mode. Still, you’re totally right. The goggles do look better.

[@RubyS.1]

Was flying my plane on hdzero the other day watching the Vario and artificial horizon move around in HD on a tiny elrs Rx. 5-6 years ago we had a massive camera, giant vtx with a button, a separate osd with like 3 elements and an even bigger Rx. technology is cool but the people that push it are cooler.

[@AdrianoCasemiro]

Firstly, the video looks amazing. The weird failsafe, again you're bang on the diagnosis. It rebooted somehow. Hdzero has a great FPV system.

[@MrShutterBug]

Use 4K (2160p60) mode for the best bitrate. Otherwise, KZbin compression will really destroy the DVR footage. I'm told the receivers should ship to retailers any day now (if they haven't already). Hopefully that means we'll start seeing retailer stock soon! If you don't want to risk missing the first batch, you can preorder now: bit.ly/3Kv6T6N These are the antennas I'm using (relatively cheap): - TrueRC Long SMA RHCP: bit.ly/3vQX7I7 - AXII Stubby (XILO branding): bit.ly/3yoldvk - AXII Stubby (ALTERNATE in case the XILO version sells out): bit.ly/3FqyHYR

[@tubekrake]

For better comparison, you could have used both to record at the same time. Even though having one on your head and the other separate might give different results as well.

[@WildpixFPV]

Could it be that classical loose xt60 connector? Sometimes these tiny pins need to be pushed apart if the battery plug doesn't fit tight and secure. Always causes reboot in midflight on certain high g moves.

[@PropsOff]

Looks really clean. Can't wait, saving up now...🤞🏻🍻👊🏻

[@alexanderfaucher1619]

I love flying at 60 acres. That is really clear video. I usually fly on the north field but I might have to try the south field.

[@aaron6516]

Super cool!!! Look forward to new fat sharks!! Need to compete with DJI!!

[@xymaryai8283]

i just got back after pausing in the middle of the mic demonstration portion, before i paused it i thought the quality was okay but coming back to it god its awful ahahahah, good review!

[@MrShutterBug]

Check your KZbin quality setting. Use 4K or it will look terrible.

[@Js93js93]

Another great video with detailed upfront information. Thanks for all the effort with your videos sir!

[@jbizzbuildsmanstuff9932]

Can I offer a suggestion to try. I know it works for me but that constant snow I figured out alot comes from running 2 of the same antennas up top they are still close enough to mess with reception.i by chance used 2 of the same omni antennas but of different lengths . And let me tell you I had so much better range and that snow went away or is less pronounced and it shows in the dvr. That looks clean too. Thought maybe it was just a good set or match and tried the same with pagoda and yeah better. But that time the beam changed on me from what I was used to for nulls. And tried changing just 1 antenna to a diff type and same result. But changed the latter back to same length and back to snow. Maybe it's a fluke but I figured your the guy to tell and maybe if it's a real thing then you got some new content . If not I'm just a jack ass again and nothings different lol.

[@two3fpv]

This looks so much better than walksnail to me, and the goggles aren't going to be sticking out a foot off your face (when they come out)

[@richardmcguigan1382]

great video... thanks i was hoping to see some more of your build videos.

[@RyanQuellet]

Nice overview

[@CalleyyyC]

Great video! Really looking forward to you 1s vid!

[@SOKOL60A]

Very interesting REVIEW!! and most importantly, I found a lot of intermediate information that I lacked to present the whole picture as a whole!! +++))) - THANK YOU!!! What ended the "race" of these manufacturers.??? Fat Shark changed the "owner"))) and HDZero almost abandoned this project. But Caddx, dozing aside, picked up the idea thrown into the abyss and went on the path with Walksnail !!!)) All of them use the same element base, so the only difference is in the design, which is what you pointed out when talking about the slot for the card. Software has been taken over by Caddx, according to update files for all HDZero, FatShark, Walksnail and SKYZONE models. All developers did not listen to your recommendations on antennas on the VRX block. The shark went the farthest!!(((having hidden everything in the case - SORRY!!(((I liked your HDMI "tail" very wisely that it is made in an angular form factor.))) Avatars seem to have overlooked this feature. Only Fat Shark I thought of making an acceptable kit for people who use GLASSES in everyday life!!!- Fat Shark ReconHD. I am 67 years old and wearing such a device is inevitable. I use SKYZONE Cobra X and it is easier to teach my grandson this HOBBY.))) You have a lot of experience in this topic, tell me??? use - Fat Shark ReconHD monoblock, or switch to Walksnail VRX!!!??? with sandwich decor. Tired of WRITING!!(((I look forward to your recommendations - Sokolov. Andrey.🤪👍🙋

[@SOKOL60A]

Очень интересный ОБЗОР!! а самое главное я нашел много промежуточной информации которой мне недоставало для представления всей картины в целом!!+++))) - БЛАГОДАРЮ!!! Чем же закончилась "гонка" этих производителей.??? Fat Shark сменила "владельца"))) и HDZero почти забросила этот проект. Но Caddx дремавший в стороне, подхватил брошенную в бездну идею и вышел на тропу с Walksnail!!!)) Все они используют одинаковую элементную базу, так что разница только в конструктивном исполнении на что и указали вы говоря о месте слота под карту. Программное обеспечение взяла на себя Caddx, судя по файлам обновления для всех моделей HDZero, FatShark, Walksnail and SKYZONE. Не прислушались к вашим рекомендациям по антеннам на блоке VRX все разработчики. Дальше всех пошла акула!!((( спрятав все в корпус - ЖАЛЬ!!((( Мне понравился ваш HDMI "хвостик" очень мудро что он выполнен в угловом форм-факторе. ))) Аватаровцы кажется проглядели эту фичу. Только Fat Shark додумалась сделать приемлемый комплект для людей использующих в повседневной жизни ОЧКИ!!! - Fat Shark ReconHD. Мне 67 лет и ношение подобного прибора - неизбежно. Пользуюсь - SKYZONE Cobra X да и внука проще обучать этому ХОББИ.))) У Вас большой опыт по этой теме, ПОДСКАЖИТЕ??? использовать - Fat Shark ReconHD моноблок, или переключиться на Walksnail VRX!!!??? с сэндвич - оформлением. Устал от ПИСАНИНЫ!!((( С нетерпением жду ваших рекомендаций - Соколов. Андрей. translation Separate Link.

[@siurbon9821]

Nice to see that they develop this technology and it is good to have alternative for DJI system. Regards.

[@jean-micheldupont1150]

Nice review! Do you think it's worth buying for the Eachine EV300o goggles? The screens are only 1024x768 so I'm not sure if it would be that much of an improvement over analog in terms of image quality and if it would scale properly

[@h2o40fpv]

Really cool video thank u.

[@Tokyo_Dom]

I take offence to the comment that my head is full of water 🤣🤣🤣

[@CrawlersCampRc]

I'm really liking this the more I see of it!! Thinking of making the jump to this from analog. I have a question though. If I get this hdzero 1 wat vtx and receiver your showing here do I have to worry about updating any firmware or is plug and Play? Will be using with skyzone o2c.

[@MrShutterBug]

I believe they will work without updating, but you should learn how to update the firmware anyway because HDZero keeps getting better and you will want future improvements as they come. Updating firmware is not hard to do.

[@CrawlersCampRc]

@@MrShutterBug right on! And good point. 🤜

[@Sfpv1994]

HI, Thanks for your review! I am really struggeling with myself if i upgrade to hdzero as i am currently still flying analog with my skyzone skyzone03O. would you say the experience is worth the upgrade costs? I mainly fly 3 inch in the garden and tinywhoops. not so much 5 inch.

[@MrShutterBug]

If you are happy with what you have then just fly it and have fun! Analog has the advantage of being cheap and light and lots of BNF options. If you want a nicer image while you fly and you have the money, then HDZero is definitely an upgrade.

[@duderguy1571]

Rx loss maybe? Aio or separate rx? I had two Zero warning rx losses less than 50 feet when i had bf 4.3 rc2 on a betafpv 1-2s 12a aio(osd tasking issue). Its on bf 4.3 rc5 now zero issues.

[@MrShutterBug]

No, it definitely wasn't Rx. More likely to be an issue with the motors/ECSs, but I haven't had time to investigate further.

[@SeeFPv-qm6ie]

I pre ordered it

[@kwaaaa]

Hey, 60 acres, my old stomping grounds! :)

[@TRITONFPV]

How about using these on box type goggles?

[@MrShutterBug]

If the box goggles have HDMI input, then it can probably work. You would just have to figure out a way to mount it. If you head over to the HDZero group on Facebook, people there can probably recommend a mounting solution for your specific case.

[@АндрейКоломиец-п6у]

probably with external patch antennas it will be 2 times thicker than the old vrx.

[@two-four-five_trioxin124]

It needs a pair of craft googly eyes and maybe a pair of FLCL style eyebrows.

[@svaneberg131]

I have the fatshark attitude v4 Googles does it work with that model ?

[@MrShutterBug]

Yes, I think it is supposed to fit perfectly, but I don't know for sure because I don't have that goggle. If you head over to the HDZero group on Facebook, then you can probably find out more specifics about that combination.

[@svaneberg131]

@@MrShutterBug thanks alot i Will try because the fatshark attitude v4 dont have hdmi port only Jack to av

[@Mekanikern]

Oh, just saw an error, your text in the video says the modules use 7mW and 11mW, that is absolutley wrong. Probably 7W and 11W not mW,

[@tomsop]

I saw a video from Ryan saying this is now delayed due to a bug. Also any plan to do a setup video down the road for newbies who get one of these?

[@MrShutterBug]

The issue Ryan reported had to do with video reception at very close range, like when coming in to land right next to you. That did in fact delay the launch. That’s why it is great that Carl takes the time to get feedback and then takes the time to make it right. The delayed launch timeframe is what I quoted in this video. It would have shipped out sooner otherwise. Interestingly, I did not observe the same problem on mine, but I wasn’t testing for that specifically.

[@md.m.8372]

If you managed to film this during the ~45 minutes the sun came out & stopped raining today I'm jelly 🤣🤣🤣

[@MrShutterBug]

Heh. Lots of rain today. No this was filmed a week ago.

[@md.m.8372]

@@MrShutterBug Last Friday I saw the 10 day forecast and got as much packs in while I could 😅 I'm sure I'll be bitching & whining about how hot it is in no time tho 👌🤷‍♂️😆 thanks for the low down on the new VRX sir & enjoy your rainy grey weekend!

[@Jamaicarasramarc]

live sound in flight? like analog?

[@MrShutterBug]

No, HDZero does not transmit audio from the drone. Some people listen to drone audio with analog FPV, but I don't because it always sounds terrible. For me, it is better to record audio from my ground position.

[@skyrotfpv]

Thanks for this detailed video! Do you only have to power the module or also the goggles to make the system work?

[@MrShutterBug]

You have to power both. The original VRX came with a cord that split at the end with two barrel plugs. They will probably have something similar for this one, but I don’t know exactly what that will be like since my prototype didn’t come with any accessories.

[@skyrotfpv]

@@MrShutterBug Thanks! 👍

[@tecnikturbo]

Thank you for all the info, I'm new to fpv and I want to ask if it would be possible to use the HDZERO with my diatone 369 and skyzone cobra x googles?

[@MrShutterBug]

It is probably possible, but you would have to add an HDZero camera and an HDZero VTX to the drone. If the goggles have HDMI input then they should work with the HDZero receiver. If so, then you can probably search for tips regarding how to mount the HDZero receiver on those goggles. Good luck.

[@SeeFPv-qm6ie]

just got mine one problem though where can I find a mini hdmi to a micro hdmi cable because my orca fpvone goggles v2 has micro hdmi port

[@MrShutterBug]

Amazon probably sells cables like that. Or you could post your question on the HDZero group on Facebook. People there may have specific suggestions for you.

[@brapler]

How about weight?

[@MrShutterBug]

My original receiver is 80 grams. My new receiver is 81 grams. That is without antennas. When you add the antennas, the new receiver takes on a bit more weight, but it wasn't enough for me to notice the difference while flying.

[@SeeFPv-qm6ie]

what are your settings on your vrx on hdo2

[@Acestrex]

I have had the same problem and still after months and months don’t know what’s causing the problem.

[@adamdude]

There seems to be a fairly consistent stutter in the DVR footage. Is that normal?

[@MrShutterBug]

No. HDZero footage is smooth. It might be your KZbin player adjusting bitrate or something.

[@starsstripesjacket]

One thing I noticed with my fat shark shark byte vrx is that you would get a random lag spike sometimes, have you noticed this issue at all with the new VRX module?

[@MrShutterBug]

No I have not experienced anything like that with the new VRX, but that doesn't prove anything. I have not had it very long. I think I know what you're talking about though. There were times when I felt like my older SharkByte receiver dropped a few frames, but it only happened every once in a long while. I haven't seen that in quite a while either. Normally it is rock solid.

[@starsstripesjacket]

@@MrShutterBug yep that sounds like what i experience also. It's really random, luckily i also fly dji so im used to flying through a bit of lag. Thanks for answering my question :)

[@GuGuHBmX]

after seeing the latest footage from the avatar/fatshark walksnail, this is a lot better!!

[@johndextersantos9541]

Can't it just go inside the goggle 😅 like any other module. . the attitude v6 has two receivers built in. the free space inside could easily fit quite a large pcb.

[@MrShutterBug]

Nope. These receivers do not go inside.

[@hprompt166]

Hi There, Do you have any complete betaflight 4.3 full release setup videos for whoops?

[@MrShutterBug]

I do not

[@hprompt166]

@@MrShutterBug ok thx

[@SeeFPv-qm6ie]

what size lipo are you using for your goggles and vrx 3s or 4s

[@MrShutterBug]

I’ve been using a 4S 1300mah battery which I put in my pocket.

[@alexanderfaucher1619]

Which antenna was which for the range test?

[@MrShutterBug]

For the range test, I used my 85mm whoop. You can learn about that build here: kzbin.info/www/bejne/i5jZmKqvjZp3nas The antenna on the whoop was nothing fancy. I think it was made by iFlight. If you go to the video, there's a full parts list in the description text. Cheers!

[@tlewis3083]

getting ready to preorder the module but have just realized the short dual 90 degree mini HDMI cable is not that easy to find. Do you have any recommendations?

[@dr0n3droid]

There had better be one in the box.

[@tlewis3083]

@@dr0n3droid I would hope so but it I don't see anywhere that guarantees or clarifies that.

[@MrShutterBug]

The original VRX came with an HDMI cable. I would expect the new one to come with a cable as well, but of course I have no control over that. I received this prototype with no box and no accessories.

[@dr0n3droid]

I distinctly remember trying to find a micro HDMI for Dominator HD(V1) being a nightmare. Ordered three different cables and two adaptors before I found one that worked. All because Greg wanted to save a buck. Typical Fatshark.

[@philipeville9506]

Accoding to the resellers site, it comes with the hdmi cable.

[@RickLaBanca]

The resolution seems to change a lot with blocky parts, not consistent to me, full KZbin rez. What am I missing?

[@MrShutterBug]

KZbin dynamically adjusts the compression rate based on load. It m not sure how to improve it for you. The video quality in the goggles is consistent all the time. If HDZero has a poor radio link then you will see blocks of video missing, but the rest of the image is always full quality.

[@RickLaBanca]

@@MrShutterBug yea I was thinking it’s KZbin but I set it to highest. I’ll try viewing on a different device.

[@SeeFPv-qm6ie]

and how do you get 16:9 video on your hdo2?

[@MrShutterBug]

HDO2 has 4:3 screens so the 16:9 signal from HDZero fills the width of the screen but there are black bars above and below. Like a letterbox movie.

[@jmlon993]

Loose xt60?

[@55amps]

What kind of camera can u use? Any Hd camera ?

[@MrShutterBug]

The camera needs to be designed for the the HDZero video system in order to work. However there are other HD video systems out there. The important thing is that the camera has to work with the transmitter, and the transmitter (on the drone) and the receive (on the goggles) need to match.

[@kalinkha]

Yes sound is bad but definetly useful

[@zsavage1820]

I'll stick with my trusty ole Hyperlite 5" Tooth fairy on 4s.. :)

[@ckfpv]

Your xt30 needs to be changed maybe a short

[@richardmcguigan1382]

what is the power to weight ratio? 7

[@MrShutterBug]

Not sure off hand, but it hovers at what feels like a low throttle value (or it did… now I have to diagnose what went wrong with it. I haven’t had time to look into it yet).

[@MaxSMoke777]

As a general rule in life, you should always be leery of any company that lacks the competence to maintain stock for customers. It speaks volumes of internal mismanagement.

[@robprice3677]

It failed because the betaflight version, am I right?

[@MrShutterBug]

No. Betaflight is fine. I think there’s something wrong with one of the motors or ESCs, but I haven’t had time to investigate further.

[@robprice3677]

@@MrShutterBug yah...what does that mean?

[@MrShutterBug]

@@robprice3677 if you’re referring to the “you won” scanners, just ignore them.

[@richardmcguigan1382]

very weird field flight the ground looks like green water 5 feet ahead then turns to grass when you get there

[@MrShutterBug]

I blame KZbin compression for that. It looks better in the goggles. There's still a limit to the resolution, of course, but you don't have any compressing blending all that green grass together when you see it realtime.

[@MrShutterBug]

Also, the KZbin quality will be much better (closer to the goggles) if you set it to 4K mode.

[@fooojin]

Looks like Jello from vibration to me

[@nyclassic4ever130]

$240 for module and needing 4 antennas? I'll keep using my hd scouts!

[@Gjoa1906]

Fewer features, consumes more power, lower quality components, crappier form factor and more expensive than the original. Yeah, don’t wait for better alternatives, this is the one to get!

[@tlewis3083]

Unfortunately that is what happens when the officials of the United States over the past 50 years have turned the country into a pure import nation rather than manufacturing things ourselves. The only alternative is what alternative is available. Unfortunately the last year America has exceeded it's larges trade deficit in US history! The only way Americans buy is by ordering from overseas which means at any time we could be cut off or suddenly have to pay more for products that contain older chips that requires more power. The whole concept of manufacturing things overseas in order to get things made at lower prices has now made the America people consumer hostages.

[@BoyMeetsClubPDX]

What's your contact info Nate ? I'm in Portland looking to talk Tiny Whoop racing events I'm beaverton.

[@NeoFlowFPV]

I've had my 1w vtx for 1 month ...love hdzero and its development but I'm moving to fast to wait so I'm going dji

[@pokiou]

doesnt look HD to me...

[@sketchpv3080]

It’s okay, but HDZero won’t have my attention until goggles with binocular screens and built-in HD receivers are released.

[@LidFpv]

first

[@andriuszvicevicius8564]

Nonsense ,until no googles i skip....

[@billyfpv2777]

Kinda a pointless review. Any system is gonna look good close range.

[@MrShutterBug]

You’re entitled to your opinion, but I would say that analog does not look this good at close range. In this video I share details about the new VRX for those who have been waiting, plus a quick test to see if any issues pop up (which they didn’t). Cheers.

[@dr0n3droid]

Billy Fpv Where's your review?

[@TorontoFPV]

@@MrShutterBug Thanks for all you do! Just got my first shutterbug 85 very excited to try it out and see if it ends up being the first whoop I actually like! Maintain that positive attitude and understand that people like Billy aren't worth your time. To make an effort to say something negative to someone takes too much energy. I watch all your stuff and rarely comment but seeing that just wanted to let you know that there are a lot of us the really appreciate you. Taught myself fpv mostly alone and you've made that journey quite enjoyable! Thanks!

[@MrShutterBug]

@@TorontoFPV Awesome! It's a fun journey for sure! :-)

[@billyfpv2777]

@@dr0n3droid personally i wouldnt waste my time on a system that there still working on to replace analog lmao i'll stick with dji fpv

[@SOKOL60A]

Very interesting REVIEW!! and most importantly, I found a lot of intermediate information that I lacked to present the whole picture as a whole!! +++))) - THANK YOU!!! What ended the "race" of these manufacturers.??? Fat Shark changed the "owner"))) and HDZero almost abandoned this project. But Caddx, dozing aside, picked up the idea thrown into the abyss and went on the path with Walksnail !!!)) All of them use the same element base, so the only difference is in the design, which is what you pointed out when talking about the slot for the card. Software has been taken over by Caddx, according to update files for all HDZero, FatShark, Walksnail and SKYZONE models. All developers did not listen to your recommendations on antennas on the VRX block. The shark went the farthest!!(((having hidden everything in the case - SORRY!!(((I liked your HDMI "tail" very wisely that it is made in an angular form factor.))) Avatars seem to have overlooked this feature. Only Fat Shark I thought of making an acceptable kit for people who use GLASSES in everyday life!!!- Fat Shark ReconHD. I am 67 years old and wearing such a device is inevitable. I use SKYZONE Cobra X and it is easier to teach my grandson this HOBBY.))) You have a lot of experience in this topic, tell me??? use - Fat Shark ReconHD monoblock, or switch to Walksnail VRX!!!??? with sandwich decor. Tired of WRITING!!(((I look forward to your recommendations - Sokolov. Andrey.🤪🤪👌👍

[@ScottDougherty96]

Any issues with the HDMI input on the HDO2s?

[@MrShutterBug]

Sorry for the late reply. No I have not had any problems with the HDMI cable with this module & goggles.