Tetra RYZ X3 Sight In

[@austinpalm7968]

Wait. So your saying that if you find your tape. And you have your top pin set at 20. Middle at 30. And third at 40. That when you dial your top pin to be let’s say 60. Then your second and third pin work for whatever distant they’re indicators point at?? Isn’t there more of a drop at distances that won’t be supported by the short pin gap that comes with the usual 20,30 and 40 pin gap?

[@grizzlyadams4390]

I had issue with pins and wheel bottoming out as well. Got close to zero at 20 (4) but now my 2nd and 3rd pin are really close together. My bow weight is 69.4, 450 gr arrow.

[@benfriesz27]

I had the same issue my pushed my sight in one notch on my V3X. Make sure cams are timed together and check your d loop. Possibly could be your peep sight needs to be moved up as well

[@NickHill-jc7dl]

I’m also having issues not moving my wheel, I’m bottomed out on both top pin and vertical infinite bar, but still having to scroll to about 11 on sight in tape to hit the target at 20, 27.5” draw, 60 lbs 417 grain arrow

[@chase-n-trails7257]

So helpful thank you.

[@codygottman8783]

I just bought this and a lift 33!

[@Sly9mm]

What's your draw weight, draw length and arrow weight? I'm having a hell of a time staying at zero with my top pin without moving the wheel- 30" draw, 65#, 440 grain arrows-

[@MrShabong]

Would’ve been nice to do a close up of the adjustments instead of filming 20’ away where the subject is wearing a black hoodie.