Flickering image fix

[@sekharkamle410]

Thanks!

[@tevzTVTevatronics]

thanks a lot!..

[@blugoose86]

A great temporary fix, but what part can be changed so no traces are cut? Since it is my microscope monitor, I need both sides to have equil image quality, Thank you.

[@oswaldmelville5939]

Very educative Tevz looking forward to learning more from you!

[@biproservices1346]

Hello, nice video. Could you explain what exactly you are cutting with these lines and why?

[@tevzTVTevatronics]

There is a short circuit at the 1 side. So if is disconnect the bad side it will work, still work because the CKV lines is conneted on the other side. WHAT IS CKV ( CLOCK VERTICAL )SIGNAL? Clock vertical signal is normally a square wave signal its contain high and low-level signals, The high-level signal is the cut-in voltage of VGH voltage which is used to control the panel TFT. The low-level signal is the cut-in voltage of VGL voltage. By google.

[@velmurugan-ox3ek]

Service explaine is very super thankyou

[@MrMonerqui]

Instant and fast repair. Thank you sir for your time. 👏👍🙏🙋‍♂️

[@tevzTVTevatronics]

Any time

[@aqua1964alessandro]

Hi and thx for your video. Why didn't you isolate resistors from R13 to R17 instead of cutting lines?

[@tevzTVTevatronics]

If those resistor is removed it disconnect both side, and you can't identify the bad side.

[@robertvillegas5889]

Gracias mi hermano, por compartir su conocimiento con nosotros, Dios le bendiga.

[@protection4541]

Hello. Thank you for your response

[@geoffedwards189]

Thanks TEVS. You are very smart man! Is there any reason that you don't use an electric screwdriver to make disassembly / assembly faster?

[@tevzTVTevatronics]

My battery-powered drill is broken, the motor is stuck up. and also my right hand is suffering from arthritis pain. if you notice that I hardly move it.

[@geoffedwards189]

@@tevzTVTevatronics I am sorry to hear that TEVS. Even more amazing that you work one handed. Would a small electric screwdriver help you? We have a hardware chain here in Australia called Bunnings. They have an inhouse brand of tools branded Ozito. I have small driver of theirs and find it quite good, USB rechargeable. I would like to send you one as a gift if it would help you. Let me know how to get it to you. Best wishes.

[@tevzTVTevatronics]

@@geoffedwards189 That certainly will help me with my work. It is my pleasure, and you are so kind. Feel free to message me here on my FB page And give you my address. facebook.com/profile.php?id=100057149602411. Thank you again and God bless you.

[@geoffedwards189]

@@tevzTVTevatronics My pleasure.

[@sadaqah_jarihh]

will this work for LG 23mp65. My pb is, I cleaned my monitor and I restarted again but it becomes flickering?

[@jesuschuerta6434]

very good idea A.I for Translation this is why I will subscribe thank you for your expertise

[@tevzTVTevatronics]

Thanks and welcome

[@สุพัฒน์มองทัง]

Good great best job thanks for sharing ❤️👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏

[@sarockpashotan]

My friend it was great. So would you please tell the signal track names ?

[@tevzTVTevatronics]

CKV signal

[@agendiasylvester6221]

still watching from this end, big master

[@angelocruz8189]

What does that mean, complete repair or just a temporary fix? Will the damage come back after some time?

[@angelosanagnostou5550]

Welcome back. I was wondering how the monitors resolution would be affected by cutting those lines?

[@tevzTVTevatronics]

Not noticeable.

[@angelosanagnostou5550]

That's good to know

[@angelosanagnostou5550]

@@tevzTVTevatronics that's good to know

[@satishkumar-gg5fm]

Nice work

[@aminulvivo1420]

Nice information sir 🌹❤️

[@tevzTVTevatronics]

Thanks

[@aboosama6395]

good job sir

[@abcabdi8523]

Thanx Sir! Very Nice job.

[@bandularathnayaka2583]

Very good.....

[@gobindapanday4238]

Nice

[@lyk99]

Hello how do I fix a monitor if both sides CKV lines have flickering problems?

[@protection4541]

Hi. Why does the monitor get fixed by cutting these paths? Isn't the information in this part needed for the panel

[@tevzTVTevatronics]

Yes, It needs that signal on the left and right sides. Since both sides are paralleled, Stiill works when the bad side is disconnected. The image result is a lower quality on the other side.

[@y_x2]

So you did not fix it correctly...

[@nelsoncarvalho7826]

Nice vídeo. Thank. You.

[@tevzTVTevatronics]

Thank you too

[@carmelobraceros8195]

Nice one sir,naglaing ka a talaga! adu mut ti mapeke ken ta apps nga usar mo😊ti ammo da kut foreigner ka isu nga english da nga english!😁✌more upload!!!❤

[@tevzTVTevatronics]

universal english language tapno adot agbuya.

[@saddikuabdulrahim2857]

Great job

[@ekremyener71]

Thank you master

[@JovitTechPH]

watching sir tev..god bless

[@nature-gf1rw]

Great work

[@tauraimachingura]

Great video.Thank you Sir

[@BaskaranPandian-n4j]

Very very super sir Are you professor

[@JoeyTECHPH]

Nice video sir, naglaing

[@tevzTVTevatronics]

Thank you

[@TheServeTech]

Thanks my friend.. Great video du.

[@gilbanztv]

nice bro.. GOD BLESS

[@tevzTVTevatronics]

Thank you

[@john-nv4rq]

Hello sir .. I did this on my nvision xc24s and got it fixed ... however, after days (or maybe weeks) it developed another issue, the image/display for a while then will go flicker or get blurred ... what should I do next... please help. thank you.

[@protection4541]

Hello. How did you know that you should cut the right side?

[@tevzTVTevatronics]

Because I doing it many times.

[@roseelectronics4582]

Nice work! How do you identify the ckv lines when they aren't labeled and are all flickering problems related to ckv lines?

[@ДомовойЛеший]

я тоже хочу знать

[@tevzTVTevatronics]

They are in the group of lines.

[@dellambongog9712]

Sir tevs. May i know if this problem may happen as well to laptop screens? It seem that this is more likely the same trouble i have, but its laptop. Thank you. Hope you'll notice my comment

[@karaors8970]

nice video bro.

[@tevzTVTevatronics]

Thanks

[@clementgavinala237]

I love u sir ur my good teacher

[@DEEPAKUMAR7599]

You are great sir💝

[@screen-protector]

Thank you for this video. I've got a question. I've got a TV Samsung UE50RU7100K which has a picture, but from time to time and now more often, the picture is flickering. Is it as well clock issue? Or, in my case it can be something different?

[@tevzTVTevatronics]

Flickering image are mostly related to CKV lines.

Rất hay và rất chuyên nghiệp, cảm ơn bạn.

[@irfanshafiqueelctronics5257]

techer exelint information nine video

[@tevzTVTevatronics]

Thanks

[@Fardeenfarwest]

Good job ♥️🙏

[@tevzTVTevatronics]

Thank you 🙌

[@Fardeenfarwest]

@@tevzTVTevatronics 🙏 you are welcome

[@johalberto2010]

Excellent video friend, I congratulate you, you cut 3 signal lines of double pairs, I understand, the Ckv 1 pair and the other 2 signal line pairs, what are they called?

[@tevzTVTevatronics]

CKVB1 CKVB2 and VGH odd/ even

[@mylenerodriguez6684]

thanks 👍👍👍

[@Blambik]

Cool!

[@dennisnganga2963]

Thanks sir

[@tevzTVTevatronics]

Welcome

[@NuruYahaya-wp9uu]

❤❤❤❤❤❤ thank you very much Master

[@winzaw7508]

Thankyou

[@M.Haru13]

damn, hey i curious how you can reconnect it back because i have the same problem and i don't dare to try it, since i don't know which site is defective and how to reconnect the cut line

[@GraceWanjiku-u9m]

Tevz great engineer

[@HarvinderSingh-fw5dy]

Nice video bro

[@tevzTVTevatronics]

Thanks

[@ogietechvlog3912]

nice cutting for ckv lines great

[@djp2803]

Thanks master

[@papyopess738]

This is magic thank you

[@sunakarsahoo6382]

Ok,sir

[@Ousmanebangoura1601]

How to find the ckv lines ????

[@MuhammadYaseen-vx5hw]

super thanks...

[@tevzTVTevatronics]

Welcome 😊

[@NatiMan-xf1nz]

God bless you

[@mungelectronics7601]

Thank you so much!

[@sathishkumar-mz7ul]

Hi brother your service center image 1 video thanks 😊

[@jonathaningram4672]

I have a laptop with a short, two capacitors (1 on each side of board) show short but when removed they are showing 1 on multi meter in beep mode, does that mean they're good/bad? Short still on board can I inject voltage on shorted power supply coil say 1 volt? Don't have thermal cam. It's very close to CPU but CPU was removable

[@tevzTVTevatronics]

Inject 3 volts so it will hotter

[@abbasalkhakani5951]

Hello tevz. I have a problem with led TV panel size 55 inches. All voltages are ok in t.con when I taking up the right or left flat cable from t.con but the voltage avv falls when I connecting both sides together.

[@tevzTVTevatronics]

Isolate the CKV lines

[@abbasalkhakani5951]

@@tevzTVTevatronics thank you very much sir.

[@NorthToSouthNTS]

Boss baka meron kang pinapabiling panel para sa nvision 27 inch curved

[@tevzTVTevatronics]

Sorry wala.

[@r.a.a.pdesilva7036]

Best sir

[@michaeljay870]

Good day Po. Tatagal Po ba pag Wala nang ckv lines sa kabila?

[@tevzTVTevatronics]

may tatagal din

[@alexandreborges8315]

Muito bom!

[@HajeejiAsjedh]

I don’t know how cutting line can solve the problem if it is a problem why would the manufacturer company keep that line

[@SolarMinerPH]

Sir saan po ang shop nyo?

[@tevzTVTevatronics]

Laoag city

[@SolarMinerPH]

@@tevzTVTevatronics layo pala magpapaayos sana ako ng tv

[@sarockpashotan]

At last I did not understand what is your wright name is it tess or temps or tevz or what?

[@tevzTVTevatronics]

Its Tevz my channels name, KZbin read it tess.

[@KrishanKumar-hv8fu]

super thanks

[@pathiranagamagesarathdisan3540]

Good boy

[@ДомовойЛеший]

отлично!!!

[@dhustinabibuag7594]

Sir location nyo po?

[@MonikaJędrzejczak-h7k]

👍👍👍👍👍👍👍

[@NorthToSouthNTS]

Pag nag palit ba ng panel boss madadamay ba ang refreshrate?

[@tevzTVTevatronics]

Hindi

[@directsystems2225]

😍❤️😍❤️😍

[@ДимаКрылов-х1ч]

👍👍👍

[@dimitrismaster]

Thank you master!

[@tevzTVTevatronics]

You are welcome!

[@nilocosmeph6082]

Newbie is watching master

[@joodyteknik1240]

Good job don't forget to drink coffee

[@tevzTVTevatronics]

Hahaha

[@pathiranagamagesarathdisan3540]

Translate to Sinhala good boy

[@marcosbatista1029]

You cold solved thiis with tape too.

[@NorthToSouthNTS]

Pag black screen boss ano gagawin? Walang display

[@tevzTVTevatronics]

Baka back-light ang sira.

[@kumarsunil3661]

good job sir

[@dineshwickramasooriya5689]

Thanks