Texas Style Cutting Board. BroinwooD. CNC inlay.

Wood: Maple, walnut, Dark Cherry.
How to find inlay parameters.
broinwood.com/products/how-i-...
The router bits used in this project.
amzn.to/3OxWF9R 👍👍👍
amzn.to/3OVNwtc 👍👍👍
amzn.to/3PfKleN 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
email: [e-mail]
xTool P2:
US Store: bit.ly/3tutOfX
UK Store: bit.ly/3TAZiMi
EU Store: bit.ly/3TBLYqW
Design by Bohdan,
check out his IG page @petrushko_bohdan
/ @bogdanpetrushko3425
/ boordon.design
[e-mail] (if you need a custom illustration, please contact him)
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik.

[@Broinwood]

How to find inlay parameters. broinwood.com/products/how-i-am-finding-inlay-parameters CNC files: broinwood.com/collections/cnc-files

[@the-wooden-beard]

Do you use a press for the inlays, or just hammer them in?

[@Purinelz]

Just watched en episode with your guest "Broinwood" and I was blown by his ability to commit to such very detailed work of art. Thanks for sharing. Hope to order my CNC soon.

[@PaganWizard]

I just found your channel from a video by KZbinr Andy Bird Builds. Your work is amazing, and I know I will enjoy your channel very much, and hopefully learn A LOT from you.

[@mcgillandsons]

BroinwooD back catalog #2. Love it. Keep them coming, please!

[@tech477]

In order to avoid cleaning the pockets you can run the same program twice, the second time just add like 50% to the feed. Nice work, mate.

[@Tiny-Designz]

This has probably been asked already but I can’t find the answer. Can you please share what brand/model CNC you’re using? Thanks 😊. You do amazing work 👍👍

[@lesrehklau1965]

Yet another fantastic piece, really like the combination of wood used

[@justjack9561]

I like your videos. I actually purchased your explanation on how to set dips and stuff still working on getting that figured out but very helpful. Thank you for making that available.

[@michaellevine6019]

Well, another nice board Nik!!!

[@daniellutringer9519]

Awesome!! Love watching your videos!

[@FFFFUUUUUUUUUUU]

I need to figure out how to do this in Fusion. Absolutely gorgeous.

[@Tina-eg2ln]

Very enjoyable

[@MrTheTaz]

More videos please!!

[@mvmota]

Excelent job!!

[@mlmccollum100]

Really nice

[@keithaustwick6180]

brilliant video as usual ...... can you do a video of the set up of the computers as this would be really helpful for newbys like miself . keep em coming

[@owais146]

SPLENDID

[@EDSmitty12]

Beautiful and mesmerizing to watch! I just curious to know how deep you make your inlays?

[@quadmaster96]

Nice work. You can really speed up your sanding with a good sander..

[@spottedowl]

Beautiful work! What CNC machine are you using

[@chriscarpenter4415]

I would love to learn how to do that.

[@gregraso557]

Hi Nik, I have watched several of your videos and they are great. I'm doing some inlays myself and I'm always messing around with parameters. I plan on purchasing your "how to find inlay parameters" soon. I'm sure I can learn from it. I have one question for you. You mentioned in another video that you use the press from Harbor Freight. I have often thought of purchasing it, but I have a small shop, and don't have the room right now. Anyway the question is, it seems in this video as in others you seem to leave the board on the CNC when you glue your inlay in. Do you take it off camera and put it in the press, or is just banging it in sufficient? Thanks and keep the videos coming! Greg

[@JustinNeaves]

Very nice! When you change bits... do you re-home to get back to zero? I always feel that I'm flexing the spindle and it may mess up zero but could be overthinking!

[@qwagmyre]

Now we just need a sanding attachment for the cnc.

[@bobbys1249]

Nice board great detail. Question, how did you clamp down glued pieces when you hand to leave board on cnc table?

[@chrismcklveen9945]

Always beautiful work man...just insane! How do you keep your inlays on top/inside other inlays so precise when having to remove and press and place back on CNC? You really just find center again and again?

[@jasonhollenbach3529]

When you glue the inlay in how much pressure and how long do you leave it in the press.

[@CSparzo]

Is there a reason you don’t just use compressed air to clean out the inlay?

[@allen2139]

I was curious, Why you don't use a flattening bit to remove the excess wood on the inlay?

[@kramer151]

How are you getting thin end grain stock to mill your inlay pieces?

[@witnessriders]

What settings do you use for the inlay?

[@Chris-vc1dh]

what CNC machine can you recommend? to start ?

[@dancoleman1269]

Hi Nik, I hope to meet you someday. Where are you located? How can we connect?

[@kerneytindlejr972]

What CNC machine are you using? Would you recommend it to a newbie?

[@misohlavati]

How do you clamp those small inlays?

[@p8ntblr1]

How do you clamp the inlay to the board? Paper press jig?

[@RickP4880]

I would also love to see the press setup you use. I think I have seen it once before in a video but can't find it. I want to get a simple bottle jack press but don't know how you make it wide enough to get equal pressure on the board. Maybe you could post a photo or film it in your next video. Love your work.

[@monportlaser]

Beautiful project, are you interested in Monport CO2 80W laser collaboration? @Broinwood

[@wadetomczyk8043]

That's a thick board

[@toddnelson6438]

How deep did you cut female and male parts

[@krydi82]

отец, звони в колокола, твой сын вернулся на свободу! (поймут только русскоговорящие)

[@turakavenkat2732]

Xx X

[@auburnU2be]

Very cool. But. I would recommend for future to match colour of the parquet. Chaos of colours and making them visible in the base understates grade. It is not artistic.

[@toddboaz6463]

When the Hu's start to chant, I am placed in a Channelview trance. Necrobattics dance with Vedas romance 😍 💖 ♥️ 💕 💓 💗 😍 nothing more and nothing lessthe name “lululemon” has no roots and means nothing other than it has 3 "L's" in it. - Quran 5 : 53

[@toddboaz6463]

Magus Mgats Antara Dasha > NASA Astragalomancy > Astronomy ⴰⵎⵓⵔ ⵏ ⴰⴽⵓⵛSukshma Starculler naide kudasai) Rinjani Ketu

[@toddboaz6463]

Joshua 15:47),stronghold or fortress, anSephardic Hebrew ahsh-dawd ] show ipa. noun. a town in western Israel: an important ancient Philistine city; early center of Christianity.Diffusion; inclination; theft. - Ashdod AEMAHHHAA