How To Use The Loft Command For Creative Effect | Autodesk Inventor

[@Neil3D]

Dear all!! - if you're looking for a good computer to run Inventor, you may then be interested to know that I have now developed and released the worlds most comprehensive FREE benchmarking test for Autodesk Inventor with a global online leaderboard. See the announcement video here kzbin.info/www/bejne/jpTOZJ-sqrKFoK8 and check out the leaderboard here invmark.cadac.com/#/ - all designed by me, Neil Cross TFI.

[@tomburns7544]

After two other abandoned attempts to learn Inventor (one in 2012 and the previous one a couple of years ago) this is the farthest I have ever gotten. And the reason for that is your easy-to-understand vids. Really, really helpful. While still a long way to go before I feel comfortable creating things, I am beginning to see that this program may not require sacrifices under a full moon and scattered chicken bones to comprehend. Thanks very much!

[@oscarmendezSkinCare]

You are the man! Thanks for your tutorials: crystal clear. Please more on splines and surfaces and freeform new features.

[@Kavster92]

Mate idk what it is about the music but it makes learning the topic so much better :D

[@lindsay66]

I love the cute music you put in your tutorials ! They are very pleasant to understand and listen to! Thanks :)

[@geraldbuys9853]

Great video. I especially like the little bits of humour you've managed to fit in to keep us entertained.

[@sp404ex]

I took the free wheeling, devil may care attitude toward the dimensions as I followed the tutorial to create my model of this razor. I paid careful attention to the symmetry constraints and spline curve geometry and learned a great deal. and the other very well presented aspects of this tutorial. I'm very proud of the results this tutorial helped me to achieve. The hilarious part was when I measured the final razor handle it was 12.5 inches long !! Thank you.

[@TheosEpicVideos]

Everytime I go to design something new... I always find myself back at TFI. Designing a compressor housing for an engine turbo. Tried coil and then sweep... here I am at loft. Keep up the great work.

[@brianhanna347]

Many thanks! Using Fusion 360 now and almost every concept transferred perfectly. Plus, I love the "happy day", "that's a treat", etc. Keep up the good work.

[@earthelder2065]

I wanted to learn about the loft command, but I learned that and about 15 other things with it !! Your videos are amazing!!!! Thank you! You are a great instructor.......

[@Neil3D]

Well there's 350+ other vids in the back catalogue just like that one! Fill your boots! And thanks :)

[@johnwelsh2462]

excellent tutorial ive used several of yours so far and its help me no end keep the lessons coming

[@Uldskoen]

Had an issue at work and was absolutely stuck, totally saved my day, thanks!

[@melihkara8851]

Its attractive how calm tNice tutorials guy is

[@Emile.L0]

thank you soo much very direct link n works for me love the way you expressed the installation .

[@Desuetus]

This is great. It would be captivating to see how you use the Draft Tool for creative effect. The mystery of that tool has fascinated people for centuries.

[@klexx3905]

I just watched ur video now and it was wat av been looking for bro..... thanks champ

[@dra.helenalima2358]

Keep em' comin' and thanks for all of the help!!

[@TheThelorac]

Omfg the wow music in the background and the intros 😂I love it. Played wow since wrath

[@Neil3D]

I played it since Vanilla, only just quit and uninstalled it a few weeks ago! What a long strange trip its been :-)

[@queenkaking7029]

soft. THANKS TO THE THE TEACHER.

[@asadqasim8234]

You can't vicariously experience sotNice tutorialng through another person, the sa way you need to try it for yourself before losing hope.

[@ffbeneno4685]

Yoo tnx dude, everytNice tutorialng works. I LIKE IT

[@malekheykal8727]

Thank you for making tutorials. It is so helpful. wish you best of luck. God bless you 🌹

[@tantiyoshinta7395]

Thank you! That was a great tutorial!

[@arnavshows878]

Yesssss, thats what i was looking for. hanks for helping

[@kzma009]

Thanks a lot for sharing these materials for free

[@vanbyakmuang1246]

Fantastic video bro, legend.

[@josedaviddelossantoschavez9849]

loved the WoW song in the backround

[@hugo117]

Awesome tutorial! very helpful, keep up the good work!

[@hothidieuthao6414]

Love your stuff! Big help!

[@martinagiulianalopez224]

TNice tutorials was easy to follow.

[@67dandro]

Very Cool. I have used loft before with sort of limited success. This tutorial was very helpful. Thanks

[@LowLife_Toby]

i love u so much bro, thanks very much

[@emslvmoddslv4568]

Congrats ! Very useful tutorials, because the comands are explain in detail ! I come from rhino and tought Inventor is ONly for tech design...

[@plcpro7543]

Thanks, buddy! I learned a lot from your videos. Good Job Mate!!

[@arfianputra8799]

very much your efforts to help us noobs out.

[@benjohnson4789]

Hi, would lofting along a helix be the best approach to design a tubular spiral slide? The final model would need to be in separate sections that can each be detailed on their own drawing. Any tips would be fantastic . Great Video by the way.

[@junellejermice5393]

Thank u soo much. i was wondering y it didnt soft the sa for as well

[@silverkitty2157]

thank you so much best loft tutorial I've come across so far!! :'D

[@mro8402]

TNice tutorials is exactly about everytNice tutorialng that you'll ever need to do to make soft on soft soft

[@worawatwongpan6]

watch more and learn more your are great thanks.

[@ProPlayer-fm4hb]

getting going on my compositions!

[@SirRugged888]

Brother I love all your videos there are extremely helpful and the longer the better the more talking the better my name is Eugene Martinez I live in Colorado and have been building pool cues 4 well let's just say since 1993 but I am doing a new invention and love all your stuff thank you very much brother

[@inventorautomation1395]

Way better than my Inventor videos 😅

[@hunhs]

Its the music from Pandaria playing on the backround, I played WoW since vanilla, raided hardcore in Wrath, then being casual ever since. Nice tutorial!

[@eddyheysen7008]

(2) in "Slicex" you could create New Drum Loops and softs in any order from different slices. And keep the loop slices playing in and

[@Siemenneste]

Thank you for taking the ti to do tNice tutorials i know I’m gonna enjoy figuring it out

[@reeceengineering]

21:39 What I need to see how is how we would shell a complex loft like that WITHOUT it making us go with an absurdly thin thickness.

[@davecelliers2000]

Great tutorials. Have you one on pipe routing with ISOs and Bill of Material? Thanks for your easy to understands vids.

[@trydana6]

Can you link the setuper channel, soft and track, so you don't have to color and rena 3 tis ? Btw aweso video!

[@dariodamico3033]

If you use the symmetry constrain you don't have to constrain the points horizontally or vertically to each other, that's an additional step that does not do anything and you can just skip it.

[@danieldewindt3919]

Thanks for this grate video again.I'm wondering what is the right way to SEAMLESSLY blend de twoo surfaces together.Like explained in the video at 19:50min. The sharp edge doesn't look nice in the zebra stripes Thank u in advance, Daniel

[@ruifilgo]

Spot on. Everybody can make a extrusion... The hard one, is to handle continuity's and smoothness in every transition between volumes. Which we don't see here. Imagine creating an entire dashboard... This software is not a proper A class creator. ICEMsurf is one of the example of the real thing without nurbs and fake approximations.

[@humamceneon2047]

u see that little cog option button on the bottom near the fullscreen button? if u click on that u can chose to slow it down or speed it up. i

[@jamesthearle8682]

obviously a bit behind time wise and you may never read this but thank you your tutorials are just the dogs b***** I've been trying to loft a spitfire wing and I know exactly where I've been falling down, your teaching stile is extraordinary!

[@heshamelkady2000]

Very useful tutorial, thank you! :)

[@kandasamyrajan]

Thank you for your explanation

[@Pedro4ize]

Great stuff, thank you, Question how do you create parts that mould ontO the lofted area if that make sense. I'm building a drone so I created the main body using loft tool but I want to add propellers to the sides caged with walls but blended and curved into the loft. Really appreciate your videos

[@VolcaFX]

Thaks so much!!!Helpful video!!!Respectus!!!

[@bhazer2381]

hence on here a month later. thanks for making feel normal again.

[@sarunas44]

hi i like your tutorials, they are really helpful, is there any way you can split this curved loft in two parts for purpose of manufacturing ?

[@Neil3D]

+Sarunas Greinis I'm annoyed with myself that I haven't done a guide yet on how to do that! I thought I had. Yea you use the split command and bust it out into a multi-bodied solid, I've done a video on multi-body solids but I can't remember if I used the split command in it. I'll get something done on that as soon as I can, probably not for another week as I'm away on business at the mo and unable to record!

[@eklavyasingh2882]

purchased soft soft was because there are so many resources and remake templates out there to help understand how people have

[@chrismerani5330]

at 12:13 you selected to create a sketch on the work plane. Is there a button to reorient to this working plane if you accidentally move the viewing angle? In Creo there is a "sketch orientation" button to quickly reorient to this working plane.

[@Neil3D]

Chris Merani Yea if you look at the toolbar on the right of the screen, the one that's vertical, the bottom button I think is called 'Look At' and you can select that then the work plane again to reorient the view. It also has a shortcut key by default, I think it's the 'Page Up' keyboard button

[@chrismerani5330]

Neil, Thank you for the very quick reply. using the 'look at' then selecting the "sketch" from the "model tree" on the left worked perfectly. Thanks again for your videos. They are bridging the gap between Creo and Inventor for me!

[@Neil3D]

Chris Merani Hey no problem, let me know if there's any particular areas that you think could do with a video that you aren't 100% clear on!

[@manvirphotography9230]

everytNice tutorialng. It was still interesting. Wish I had tNice tutorials video when I started out

[@anderssonjoelmallmasueca44]

How do u connect ur contentinterface to soft soft so u can record?

[@codarceasabinbogdan188]

:))) I learned more in this tutorial than in 300 pages from Mastering Autodesk Inventor book, nice :D wanted to subcribe but looks like I`m already subscribed, probably when I learned for Autocad certification I subscribed and I can`t remember :D thanks

[@tonynarducci4742]

Thumbs up

[@ishikarajput790]

Don't matter how long you take, long as you do it cause you love to

[@noelbalita8262]

can i do tNice tutorials with the trial version?

[@sdsn592]

clips. I use a drum loop and afterwards I want to record a appguitar. What happens.. the drumloop starts to record again along the

[@imgestudyo4399]

very very good lessons

[@i3Arc]

favorite tNice tutorialng... In life. That's not an exaggeration it's actually the pinnacle of my existence, and if my life were a solar system, creating

[@Azambarohibaloch]

Thanks a lot

[@markdesolate]

@19:58 i laughed way to hard at this! Thanks for the vid, it is a good one!

[@北科大-凃泓廷]

Hey, im a new creator on youtube, and i'm really unsure on how to get started... But i've been ssing around with soft soft for a few

[@nirmalsaha333]

no age restriction to make art!

[@Entecheng1]

When loft doesn’t work is there something similar to ruled surface?

[@picosdrivethru]

how is inventor for automotive parts? purely for digital rendering and design concepting?

[@knithin6501]

Thanks to you

[@arsharizalamirariff6137]

Will u draw surgical mask using inventor?

[@mohd.affanmandilkar7849]

TFI. How can i pierce guide curves in two different curves?

[@marialis9981]

Hey bro! I need soone who know After effects. Can you help?

[@arivo9062]

i'm having trouble with this tool .Wondering if you can help. i can select two sketches but the "ok" click button is disable

[@boss01q]

U BEST!!!

[@radwaadel6230]

impression almost everyone does their soft in soft soft but record their voice in ProTools. Not sure why. Would like learning how to do

[@tukanguy]

hi, How can draw this parts in assembly mode, because I cant draw parts in my furniture, thank you

[@elerik94]

Nice

[@felipesierramartinez8188]

I'll probably not get an answer but still, when I opened my soft Roll I couldn't place the "notes" or however you call them that finely, by

[@MatthewIbarra98]

Can you loft using a 2D cross-section and a line?

[@Neil3D]

+Matthew Ibarra Yea, use project cut edges to get your cross section and then create the loft line

[@annejantz4329]

Very Cool!!!

[@kroniselimi7563]

I have mp3 format s and i want to make it puncNice tutorialer plzz help buddy

[@peaceofvoicenews4803]

The channel rack tNice tutorialngy isnt on my screen?

[@jonholmes1000]

Thank you!

[@tukanguy]

hi, I need create loft but my path is dif plan, do you can help me, yku

[@fudizhang8842]

When I tried to go along the centerline, it says Edit loft feature failed due to loft.ipt: errors occur during updated. Could you please tell me why?

[@sohaibalam4168]

nice to have a music in background. Makes it more interesting :)

[@margheritasalacchi]

Cakewalk and I haven't found the courage yet to go through all the steps listed on the website to solve it. I'm tNice tutorialnking about migrating to

[@NikitaIsLive]

I would like to ask you a question please?

[@meditation7298]

showed, how do I fix tNice tutorials? I followed exactly what you did.

[@sumairahashmi7825]

but there is a benefit in it))

[@SuperJV4x]

failed to do loft along the centerline :(

[@SuperJV4x]

damn music. Is this the 4 seasons hotel?