The 1965 Mustang Is Ready To Get SandBlasted !

►Hey Guys , In today's video we setup our new workbench and shelves and then we get the 1965 mustang ready to get sandblasted !
►Check Out Borroughs Products!
-All Products: borroughscorp.wpengine.com/pr...
-Workbenches: www.borroughs.com/products/wo...
-Commercial Grade Shelving: borroughscorp.wpengine.com/pr...
►New Vtuned Merch!! ► vtuned.com
►Film/Editing- / mqqrk
-------------------------------------------------------------------
Subscribe! ► / vtuned​​​​​​​.com
Instagram ► / vtuned​​​​​
New Vtuned Merch! ► bit.ly/3asJjbS​​​​​​​​​​​​​
----------------------------------------------------------------------

[@Vtuned]

►Check Out Borroughs Products! borroughscorp.wpengine.com/products/

[@rsprockets7846]

its a vet window all cars had em up till 1975 or so

[@ryanpetty392]

This is the impact you want, to make things faster bro! It’s expensive but well worth it. It will stave you in Tare down time and money !!!$$$

[@ryanpetty392]

Get a plastic rivet puller set as well! Love the videos !! It’s realistic, but work on your enthusiasm, and time laps will help in some. Intros are for descriptions on what your trying to do. Just a little constructive criticism. But we love what you can do! We’ve learned a lot about replacing body panels. Im repairing my 2000 mustang driver rear quarter panel because of you. I’ve had it for 13 years! And the bondo is coming off!!!Thanks bro!!!!

[@terrybaptist795]

What is a VET window?

[@EffGee-ov7bk]

@@terrybaptist795 "ventilation" 🤣😎😅☮👍🥨

[@Joshuamorris81]

Just don’t forget you gotta do your headliner before you put the front and rear glass back in. My brother tried skipping that step on his 66 stang and it never looked quite right

[@kickit59]

You have the same problem with the 67-69 Camaros!

[@zkdadof4]

This is an excellent series. I like that you're showing all that you're doing in good detail with all the bloopers mixed in.

[@vincentkennedymcmahon8380]

Yup.

[@angelayala42]

Ya I love that too .@@

[@terrallputnam7979]

That little window is from the age before air conditioning. It was called a vent window. I could not be used during heavy rain. The drip rail is also from the days before AC. People had to open the windows in light rain for ventilation and they also smoked cigarettes a lot more back then. They would open the window just an inch or two to ventilate the smoke out, or just get some air moving. That drip rail kept rain from drowning you when you got out of the car. You should run a razor knife under the trim from the glass side and then the glue would be cut without damaging the stainless steel or aluminum trim.

[@khr1379]

it is called a wing window

[@greyhairedphantom4038]

If you have them wide open and someone opens a back window, everything on the dash gets sucked out the Quarter Vent Window....like..Vehicle Title ...Drivers License...bag of Green....

[@jeffleach2668]

My ‘97 F350 obs has the vent windows. I’d be curious if anything newer than that still had them.

[@jskidpatrol]

Wind wing. Also 70x2 air conditioning. You open and turn both wing windows inward while going 70mph.

[@BenLiftsStuff]

Called a quarter window where I come from.

[@richieduck67]

Glad to see you back and hope you feel better man

[@Tstarke97]

I love him in this “semi-sick” state😂 he’s adding some low-key humor in there!

[@MelonTL_YH2]

Get some rest Ben! Will recover faster with some rest!

[@philtucker1224]

Maybe it’s just mild COVID going round?

[@alshotrodsandratrods8780]

I have a good used roof from a coupe that I changed into a convertible. I cut it at the bottom of the windshield post and the trunk and rusty quarter panels are still attached. I can cut the B pillars below the factory seam. I'll donate it to the project for free but You'll have to pick it up or arrange for shipping. I'm in Maine and it's buried under the snow. I can't get at it untill snow melts around the end of March. You have a good roof and quarters if you convert it to a fastback.

[@davepelfrey3958]

Those window vents were the A/C back in the day. Ask me how I know. LoL 😆

[@Pumpkingilmour]

Shop is coming together NICE. Total pros, you guys. In for a great year 2022, so glad.

[@irav4u]

our local blaster sets the bodies on 55 gal drums to blast the underside. your blaster probably knows a way to do the underneath without a rotisserie. While it's up on the barrels, spray it with epoxy to prevent immediate rust.

[@sjv6598]

15:55 they make a very inexpensive trim tool removal kit. Much much better then a screwdriver and you don’t screw up window trims and you don’t leave dents all around the window using metal as a prying tool. Just a thought 🙂

[@pmyhill]

Great to see you back with another build video ! Hope your feeling better soon 👍

[@VanisleNSX]

Nice workbench. The quality looks amazing!

[@ericmiller2081]

Hi Ben, there’s a specific tool. That slips under the trim from the glass side and lifts the clips away to release the trim. Ask your rolling tool bandit and they should be able to hook you up for next time.

[@donnywhite8942]

"...those little windows" are awesome ;-)

[@houseofno]

Hope you're feeling better. Best wishes!

[@donnywhite8942]

noticed the whole gang was sick ??

[@michaelbottomley2520]

Get yourself some nylon trim tools to take mouldings off screwdriver is a No no

[@1974AidieS]

Great to see you committed like that working when you not 100%..respect from New Zealand - enjoying the build.

[@srthellcathemi3037]

Wow! Mr Tang is coming along nice and easy, prepped for sandblasting. Already I'm visualizing you guys taking the finishing car for a blast lol

[@jimcannon1444]

Good stuff, Ben. Thanks for putting out a video. Hope you feel better soon!

[@michaelbottomley2520]

You can always straighten the mouldings on a piece of wood with A suitable screwdriver that you can re-polish On a buffing wheel and compound

[@roamcountry2621]

I'm glad you're posting more.

[@FabiusMaximus1000]

They really hooked you up on those benches! I wouldn't get too enthusiastic about how much rust there may, or may not, be until they sandblast it.

[@jefnf]

Quarter panel extensions are magnesium not aluminum. Do no remove the drip rail. Its It's hardtop car and will leak rain

[@steveshilling729]

I thought they were pot metal 🤷‍♂️

[@homerfry9234]

@@steveshilling729 You are correct, pot metal.

[@andrewg2322]

Hyped up for the stang content again

[@Mikeyhunts]

Vtuned -- Since you have it down this far, and the roof has to come off anyway, you should consider converting it to a fastback... Given how you handled those VIN numbers, might as well.

[@TheUnderGround979]

And also he only has to do one Mustang build instead of 2.

[@theroofer3181]

@@TheUnderGround979 I'll take two Mustang builds please.

[@edhanm]

Nice! Things keeps better and better keep up bro

[@geraldproffitt5101]

If I remember correctly from my '66 notchback, the roof and A & B pillars are all one assembly that is weld joined and tinned at the quarter panel tops. It may be tough to find that whole assembly in any sort of sound condition from an original car, but replacement assemblies are available from the same company that you got the fastback from. Good work so far! Oh, and keep the window drip rail if you plan to ever drive this car in the rain.

[@eds1990sporty]

I see the lift is in the air got to love it.

[@conmancollins1176]

Thanks for making a video even when you aren't feeling the best

[@morganmoreland3779]

You should definitely paint it the same color as those stripes, that blue is 🔥🔥

[@NFMynster]

loving the extra questions Mark asks, helps vtuned give out his knowledge better!

[@13christbane]

like how to fuck up window trim?

[@rickallen6378]

@@13christbane That was some of his best advice.

[@cet1421]

Year One is a great place for good oem parts for older mustangs.... still digging your content

[@mattivirta]

not matter have oem ,genuine or new old spare new product parts ewery people not can see what parts have. idiot waste monbey new genuine parts if can buy cheapen same new product parts.

[@bionicsasquatch]

Kids taking apart a mans car. Never fails V always forces things no patience.

[@theroofer3181]

At least some kids his age are interested in cars and not video games.

[@aaronuuu]

thanks for making a video even tho your feeling sick get well soon

[@ahnafzahid9450]

Have been waiting for another Mustang ep. Thnx a lot guys!!

[@joebooth8585]

Your doing great job and the shop is coming alive 👊keep up the great work 👍

[@craigcaggiano431]

Looking like a good start to be blasted and seeing what’s beneath the paint.

[@mikehynes6632]

Those boxes the bench and shelving came in would probably come in handy to store your glass.

[@birchwhitehd]

Good progress 👍

[@davedawdy8989]

hope you saved the aprons the vin is stamped on the dr side

[@ronaldwarren5220]

Thanks for pushing through

[@bobmanzi7712]

good stuff thanks, hope you feel better.

[@ronwatson4902]

We used to call those vent windows fart windows and whoever did that car before took a few shortcuts.This time it's getting a top shelf build from a real pro.Nice bench too.The box yours came in is better than my bench.Take care Tennessee and feel better.!

[@13christbane]

top shelf build? is he sending it someplace else to get it done?

[@nikog4071]

kick ass job you got this Vtuned

[@haroldboyer1174]

Good to see you back VTUNED, awesome video.

[@muskokamike127]

16:20 glass guys are crying CRYING....I know I am :-(

[@kickit59]

Vtune it will be interesting to see how the restoration shop did the quarter panels! Anyhow once the body gets blasted you will know! Hopefully it was done correctly! As always I am looking forward to the next video!

[@angelayala42]

You doing great job with this mustang white and blue stripes

[@rickbareman7632]

great video mustang looks really good you gotta remember that thing is older than you guys are the artist at work.

[@13christbane]

im not sure you know what "artist" means

[@muskokamike127]

If you can, make sure when you put the door back together to replace the nylon rollers and lube them up good with lithium grease. Your arms will thank you lol Specially when you reach over to roll the passenger side down....:-)

[@SJ-cy3hp]

Hell yeah time to blast it!

[@billjohnson8794]

If you remove that drip rail you’ll never be able to crack your window open in the rain again. It’s really a pain

[@one.2622]

Why would you open your window in the rain?

[@billh230]

@@one.2622 Help with defrost, and for some, it's actually kinda refreshing. Don't need to open it all the way, just an inch or two.

[@billjohnson8794]

And if you ever experienced really hot humid weather with no air conditioning, you want at least a little breeze.

[@petersutherland2075]

great content as always thanks bro

[@sharedinventions]

I like to put large stuff to the lower shelves because they are likely to be heavier. Chest-level shelves are the easiest to reach, it should be allocated for stuff used most often.

[@lbjailer]

Makes me remember my 64 1/2 Mustang I had when I was young.

[@Pumpkingilmour]

Regulars starting to forget to hit the like button. Keep this channel thriving!

[@jasonhovey815]

Feel better Ben. Looking good

[@skeelo69]

Get better soon

[@fstlnj29]

Ospho works great on light rust. You can wipe it on like a polish or paint it on and wipe to avoils chalky build up.

[@cometowme]

Excellent start, more progress

[@Berbatov204]

Health and Family comes 1st, thanks for the vid, looks great!

[@jamesyorgensen7472]

Nice shop nice car an hope u get better soon

[@ahmedakab8170]

Love your videos

[@garykee1]

don't worry about how long it takes. just make sure it's done correctly and with good health and state of mind. that's when mistakes can and will occur. this is not one of those other KZbin channels that need to complete a build in a matter of sometimes hours..

[@henrymatthews9365]

Wow that is one crispy door handle.

[@AORacing]

Keep the wheels on both, just a little tip either its off the ground or has wheels makes cleaning the shop floor so much easier.

[@utshwala]

Those little windows were A/C back in the day!

[@JMRRebuilders]

Love it brother cant wait to see that IFS install. LOVE IT GETTING AFTER EVEN SICK.

[@13christbane]

yeah nice work spreading the covid!

[@JMRRebuilders]

@@13christbane well that is rather presumptive of you there big guy.

[@KnightRiderWRX]

Hope you feel better soon, God bless!

[@standavis7266]

Hey Ben, glad you are going with my idea of Vapor Blasting the car, You will be happy with the results. Keep up the great job

[@tomswindler64]

Great video, just keep doing what your doing and carry on.😎😎😎👍👍👍

[@Jack-gy7cs]

You got more excited about a roll-up window than I did when I saw my first push button electric window. Haha

[@jackiemay9471]

if i' m not mistaken the chrome trim around rear glass comes out with rubber gasket and glass all at the same time also go in all together with string

[@michaelmoore4334]

Old school. Take the cardboard from your box and take the X brace off the back of your cabinets. Put the cardboard on the back then put your X braces back on.

[@marc5460]

tnx for the video

[@brianproffitt7263]

Gotta have the mirrors it would look weird with out them

[@homerfry9234]

Didnt come with a passenger side originally.

[@waterislife.9204]

Get well. Good fun.

[@waltercobb4675]

Oh I was just looking up in the book The dripper also stops the water from going into the sewer from the window so it doesn't get down there to your door

[@ronmiller1162]

never seen a set of rear window moldings get got that quick

[@FlyEaglesFly19111]

Hope you feel Better Ben. Mucinex...best over the counter on the market for the congestion. Stay safe and be well.

[@cityhunter25]

be careful man if you sick, you might have caught covid, just take the rest needed to recover better. good luck!!

[@13christbane]

he has covid and he knows it. a bunch of them have/had it.

[@raymondtuckerjr1886]

Man, have I been waiting for THIS drop.... 23 garage, Motorhead, Goonzsquad..... everyone but my fav.....glad you're getting better.

[@johannesmikkelsen0910]

A tip would be to use fish line when removing the trim piece as well

[@pinstripingbybear.]

It really doesn't matter if you sandblast it in the rainy or dry weather. Because you are having it (SAND)blasted they have to run water with the sand or it will overheat the metal warp it. The smart way is to have it dustless blasted they have an additive that keep the metal from rusting after its blasted.. look up my classic car here on KZbin and in his playlist he has a video of dustless blasting on his 1970s f250 and they show you everything needed to know about how it works even in the rain and how much softer it is on the metal

[@djmrausch]

So much yes. Most sandblasters without experience in blasting classic car bodies will ruin the body

[@1904RICK1]

Those windows were known as smokers windows!🔥💭

[@mxolisisibeko5159]

Get well bra lots of love from South Africa 🇿🇦

[@jaysmith5084]

The doors will have a Ford stamp on them just like the quarter extension did so you can tell that they are OEM and it should be around the latch area . P.S. window trim tool prevents bending or destroying window trims 👍

[@cjtprint]

You should get the shell acid dipped. It gets into ALL the nooks and crannies. No mess after the blasting!!!!!!!!

[@ryanpetty392]

Wow my bad ! I learned something about rubber window seals today !

[@celeroon89]

Hey man, hope you get better soon. Miss the vids

[@angelayala42]

You are an amazing mechanic .@@

[@waltercobb4675]

The trooper is also where the windows actually have a perfect seal to them so they don't leak in the rain because your door does not have an upper part to it it's part of the door

[@chrisdowns3069]

You could straighten that roof,old school panel beating,hammer dolly and shrinking where necessary. It will be good practice for you.

[@13christbane]

no way in hell he has the skill for that. I'd skin it too. and I have the skills for it. can have a skin on that car in a day.

[@killachief187]

Looking good 👍

[@conmancollins1176]

I see you got the lift working

[@markbennett6658]

I’d keep the chrome trim and OE mirrors even if you’re going to restomod it with the Coyote engine etc. Then again I’m a lot more ancient than ‘Mr Tuned’ and looking at it through old school eyes! The amount of times he mentioned how well the doors fit was getting a bit “I’m an excellent driver but only on the driveway” as well😂!

[@jamesbergeron8356]

Feel better Ben, thanks.

[@patchmack4469]

good man Ben, a bench on wheels, ideal to work right next to the car your working on, but a nice metal one, get some large foam bumpers for that (just in case moment) it will stop you swearing

[@dougsandercock1672]

Find a blaster that uses Baking soda. no water no heat. Plus Walnut shells on stubborn undercoating I used to specialize in both.