The $20 Original Xbox Internal HDMI Mod: ElectronAnalog

#retrogaming #gaming #xbox
Visit www.pcbway.com... to order your SMT prototype for only $29. Free Stencil and Shipping included!
Looking for one of the consoles I made in a video? Visit www.techbabble...
In this video, Shawn installs the Electron Shepherd ElectronAnalog internally on an Original Xbox!
Tools Used:
ElectronAnalog: electron-sheph...
QSB: www.kleinanzei...
As always, like, comment, and subscribe!
Looking for parts to upgrade your OG Xbox? Visit: ogxstore.com

[@jamesdavies686]

a 10uf 16v tantalum would be a better choice to replace that radial SMD cap. Shouldn't use ceramic caps to replace a polarized cap.

[@newrez]

Can I ask - why not?

[@pogman15]

as its just an internal version of the adaptors idk why someone would go this route over stellar or hd+ with cerbios, considering the work involved the external adaptor seems the best way to get analogue out a hdmi at a low cost and effort. its only benefit being no dongle at the cost of doing more work than installing one of the more expensive better options.

[@Andr0-Zero]

Wooo! OG Xbox Action! Maybe I should send you the HDMI solution I got from N64freak years ago.

[@michaelpickett6952]

😮

[@Techbabblers]

😀

[@BorderlineOCD]

Very nice work and some fine soldering skills 👌🏻

[@TheCryptoCompass.OfficiaI]

Nice work ShawnACE 😊

[@Techbabblers]

Thanks 😁

[@TheCod3r]

EvoX dash is butt cheeks lol

[@Mareka6969]

is it just me or does Wii2HDMI look best?

[@SeanPennII]

It looks so good. I have three xbox adapter thingies. Theyre def worth owning

[@ichigo3223]

The color looks too saturated compared to the Stellar and Electron. Might look ok in the video, I bet it looks horrible in person when compared side by side.

[@NitNek_]

EvoX was my fav dash!

[@ryutenmen]

Wii2HDMI is the best, it literally cost 2 bucks. As for the soldering skills, you need them for all three mods.

[@Techbabblers]

Bang for buck!

[@fatalisticend]

So this is basically just a slightly polished version of what existed 5yrs ago 😂

[@topvint8787]

I did this with wiring and not the QSB. The output isn't good, with jailbars quite noticeable in black screen. I wonder if this is noise introduced by the wiring. I used 30AWG for the signals and 24 for ground and power. I tried to keep the wires short but they do cross around. Any thoughts?

[@Punisher1_1995]

How would I mount this in a Phat PS2?

[@Techbabblers]

That i am not sure, I haven't done one in a PS2 yet.

[@Punisher1_1995]

@@Techbabblers oh ok, ill sub and hope you make one.

[@ViSSrox]

with one is the best? Electron Shepherd, Wii2Hdmi or XboxHD+ ?

[@Techbabblers]

HD+ has wayyy more features

[@ViSSrox]

@@Techbabblers like what?

[@95Comics]

What is the mod chip with the most features to install?

[@mikehumphrey7868]

Cerbios

[@SomeAngryGuy1997]

​​@@mikehumphrey7868 That's a BIOS, not a modchip. You can flash it to any modchip. As for the question, I would have liked to say "Stellar", but half the features aren't even implemented, and the rest don't work right

[@L0tsen]

@@mikehumphrey7868 thats a BIOS not a modchip

[@L0tsen]

Openxenium with prometheos. It is the most modern modchip with the most features. You could also do a tsop flash if you have a 1.0-1.5. I would go with the tsop since it's free if you have a soldering iron

[@tony85885]

Easy mod chip to install is raspberry pi with modxo

[@harrysacket]

It's hard to say but it looks to me like wii2hdmi has the best output. Am I wrong?

[@Techbabblers]

Wii2HDMI seems to have a higher brightness on the output is what I noticed

[@dazamad]

Which hdmi mod was easiest to install? My old eyes cant tell the difference. Thanks

[@Techbabblers]

Wii2HDMI felt the easiest since it was soldering the QSB and soldering the HDMI on-top of the QSB with minial wires needed.

[@anthonyaviles8665]

How did you buy the pcb from him

[@Techbabblers]

You can try emailing him but otherwise, doesn't seem to be any other way

[@liamcooper-d1f]

How did you get the QSB? Seems your link is a german version of craigslist / gumtree. How can i get the QSB if UK based?

[@Techbabblers]

Would have to reach out to the seller in the listing unfortunately. I can't seem to find any US/UK listing

[@jelkobg5944]

Is there a place from where I can get it in EU, shipping cost is insane

[@Techbabblers]

Would have to reach out to the seller in the listing unfortunately. I can't seem to find any US/UK/EU listing

[@marktoo9454]

Shawn... Its really u.. 🤣😂