The 212cc Vader is CRAZY!!

[@terrancemoody205]

That swap sounds so good now and it looks like its not strugglingto get up to speed..I can tell the big difference just from the video

[@CageFreeTom]

Loving the idea of a new engine, might reserve this plan for next Grom Clone(I have a Boom Vader now), but planning on doing a BBK for my current bike. Loving the video!

[@LOL2YOU]

@@CageFreeTom thanks man! I have a ZX4-RR now 👀

[@CageFreeTom]

@@LOL2YOU Zippy little bike. Having a hard time giving up my bikes, so up to 3 now.

[@GreenHairGoblin]

can you send me a link to the engine ?

[@stonemedinaaa]

424ccs of fun right there, nice stuff m8 🤘😎

[@LOL2YOU]

Hell yeah bro! Love the videos.

[@josephsaucedo8691]

Most people get a new clutch cable and amazon sell a hd starter chain they have a upgrade clutch for it and springs for wheelys the shift lever arm and shift star mod also a good upgrade if you kick start it you run a chance on snaping the input shaft if kicked over wrong.👌✌️👍💯 Hope it helps

[@LOL2YOU]

Hell yeah thanks!

[@shearenergy8203]

Ur dum try 2nd gear to jump start😮

[@danguy2009]

the stock piston ring layout on the 190 2v must be setup wrong with the ring gaps in the wrong places. ever since changing to a daytona 4v head and setting them myself i havent had a drop of oil come out the breather.

[@LOL2YOU]

Man that's good to hear. I'm going to a four valve head at some point this year. It doesn't do it in low speeds but when I'm constantly going 60+ it was leaking out like crazy. My catch can has fixed that recently though. Have you ridden someone's 2v to see if there's much of a difference with the 4v?

[@danguy2009]

@@LOL2YOU No unfortunately I don't know anyone else with a 190 but from my own bike it feels like it has a load more power up top. ive had to put a smaller sprocket on the back to keep the revs down and i still think i could go taller. currently 16/33 on 12" wheels

[@LOL2YOU]

@@danguy2009 shit, nice man! Yeah I'd never go back 125 lol. This is perfect for this bike.

[@rafaelmoreno3243]

Is it sketchy on the expressway since it's so lite?

[@LOL2YOU]

I don't really take it on the freeway but roads that are like 55-60 are nothing. 65-70 starts getting sketchy

[@yahukondalast3718]

Thanks for your advice bro

[@LOL2YOU]

No problem man.

[@kenchan6688]

Can you give me full description of your motor on plan on doing an engine swap on my clone grom

[@papiigremliinGamiing]

Where did you get the side plastics from?

[@SpACeCruizeR2o3]

What to it is it still going sickest one i seen yet year to date 😮

[@Kiwi.is.a.dog24]

10 ducks for a chain ain’t bad

[@LOL2YOU]

@@Kiwi.is.a.dog24 not at all!

[@MrTakeone51]

What phone holder do you use?

[@LOL2YOU]

It's a Ram mount. Sorry I don't check this often.

[@MrTakeone51]

@@LOL2YOU Its all good, thanks man i'll look for it.

[@Sengsirivanh5]

Wya in Arkansas? We ride mini bikes quiet a bit in fort smith

[@LOL2YOU]

I moved to Houston man. I miss it there for sure! met some cool peeps.

[@Sengsirivanh5]

@@LOL2YOU Aw man guess I came across this a tad late haha. It’s not too bad here, stay safe out there bro!

[@themaskedmonkey17]

What are they using to talk to each other like that?

[@damacmachine4u991]

What carb are you running? Jet sizes? Mine acts like its running outta gas at 60ish had 122 bumped it up to a 130 main 42 idle. Got a fake 28mm nibbi. Testing new setup tomorrow. My 212 is in an Icebear Champion CT70 clone. Thats awesome you and your girl both ride! My wife thinks im going through a midlife crisis building muscle Mini bikes in the basement. 🙄 I wouldn't kick start 212. I broke teeth needed new clutch basket and kickstart gear. Flywheel went bad too. Starter chain i had to rig the spacers to take up slack used 25h. You really need to know your *hit to have this engine. Im determined to get it tuned right i know it has 75 mph in it at least. So much fun. I got the dual cooler set up looks like mini radiators and great to warm your gloves on when its cold 🥶 haha

[@Van-t5e]

Is there a small clutch cover we can take off to adjust the clutch? Can't seem to locate it.

[@LOL2YOU]

No clutch cover. I had trouble with this too in the beginning. Down by the engine, you push the lever all the way over until you can't push anymore and then tighten it there and then adjust from the top.

[@Tuckem2STOGS]

The place I bought mine from had sent me a replacement speedo because my old one was reading sporadically and I tried a new sensor anyways they ended up sending me a 2019 boom vader and and it has the key both button ajusments I was able to get mine to be perfect to gps so look into the 2019 boom vader speedo or just grab a aftermarket

[@LOL2YOU]

So you got it working with a replacement? I know the new ones are super messed up. I tried all kinds of key combinations and it never worked.

[@Tuckem2STOGS]

Yeah I had to replace it but I didn't have to pay anything because the power sports Max company I bought it from replaced it for me under warranty or whatever but whatever but I got lucky and they sent me a 2019 version Mine Is a 2020 version and that's the one that's locked Down

[@LOL2YOU]

@@Tuckem2STOGS yeah I wish I had that option. Mine just didn't respond LOL. That's a good company you bought it from. I just got a mount for my phone and used GPS with my phone

[@Tuckem2STOGS]

It's a great company they have a lot of bad reviews but I think it's just due to people's incompetence with China bikes and not knowing you have to basically break them down loop and lock tight put them all back together anyways the anyways the only sucky part has been waiting for registration for almost 4 months now supposedly they've lost their dealer's license or needed to renew it right when I bought the bike and I didn't know so I'm still waiting they said they're gonna do Though 4 months is a long time

[@davanteperez7792]

WHERE DID YOU GET THE BODY KIT FOR THE BOOM VADER BROTHA?

[@LOL2YOU]

@@davanteperez7792 this is just an example but eBay man. Take a couple weeks because it comes from Thailand but it's so worth it. www.ebay.com/itm/405000147696?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wzmxk_fcsrg&sssrc=4429486&ssuid=qqvmnzYMSMO&var=&widget_ver=artemis&media=COPY

[@blackteamgo8452]

The blue plastics that you have covering the motor where do you get those from? I just ordered the same bike

[@LOL2YOU]

Off eBay. Takes about 3 weeks cause it comes from Thailand. www.ebay.com/itm/353948043087?hash=item5268f2874f:g:1HAAAOSwWu9idAsi

[@blackteamgo8452]

Preciate it.

[@blackteamgo8452]

When are u gonna do an updated video of the bikes?

[@Drillstheruler]

Yo bro can i see how you wired the stator to the 125 wire harness i got the 190cc gpx moto

[@nollidelddik]

What catch can are you using, and did u run a return line???

[@LOL2YOU]

Shit I sold it, but it was just something from Amazon that caught oil from the case is all. You'll have to get creative as there isn't much space. If I had to do it again I would have had the can and bracket welded on somewhere.

[@nollidelddik]

@@LOL2YOU also i have a cooler installed on mine but only have the oil in the sightglass half full coller us up abover engine and full of oil, but if i fill the case it all comes out the vent.. still does if hammering on it for long distance

[@LOL2YOU]

@@nollidelddik yeah that was just the case with me too. It just leaks at higher RPMs which is why I had to get the catch can. My girlfriend and I were ripping it through the mountains with a bunch of bigger bikes one day and when we stopped I noticed there was oil all over her back tire, scary as fuck! Definitely make sure you take care of it if it's leaking

[@lilscotty11]

Where do you get the bottom fairings? Is the swap hard for a beginner I have all the tools

[@LOL2YOU]

I sold the bikes, but I got them from ebay (Thialand). They matched up pretty well besides like 1 part I had to cut by my exhaust and maybe drill a couple holes. The bottom did end up cracking when I hit something low, but totally worth it. EVERYONE used to ask about those things. Changes the whole look

[@chrisferguson5541]

She’s fast 😂

[@65FunANDStuff]

Awesome! I just ordered my 212. What exhaust are you running that fits it well? I need to order one.

[@LOL2YOU]

So if you have an aftermarket from your 125, use that. Otherwise it has to be bend just like stock cause of the angle. Just sucks, but shouldn't be too much. I just used this amazon one, but sounds amazing: www.amazon.com/dp/B07BHMFXMD?ref=ppx_pop_mob_ap_share

[@65FunANDStuff]

@@LOL2YOU thanks a lot! I will order one for it.

[@LOL2YOU]

@@65FunANDStuff hell yeah! Enjoy man. Let me know if I can help.

[@justinstokes9157]

That link won’t work, do you have another one?

[@LOL2YOU]

@@justinstokes9157 sure. www.amazon.com/dp/B08RMMM8DQ/ref=cm_sw_r_cp_apa_glt_fabc_73WN8YV9WD9QWTF19M3V?_encoding=UTF8&psc=1

[@fa5.problems895]

What catch an did you end up buying ? Have you hit top speed yet 👀?

[@LOL2YOU]

82 so far haha. I just got a little cheap one but it has been working perfectly and no more oil leaks and looks great. www.amazon.com/dp/B07ZCSZR2R?ref=ppx_pop_mob_ap_share

[@fa5.problems895]

@@LOL2YOU holyy 80s ?? i cant wait!

[@LOL2YOU]

@@fa5.problems895 yeah dude. Wind will still get you but it'll do it.

[@Van-t5e]

There are two ports for this catch can in/out, how did you route yours?

[@LOL2YOU]

@@Van-t5e mine had an IN and OUT. After the install I Haven's had any issues so far!

[@ThatHoosierKid17]

lol what this looks like so much fun

[@LOL2YOU]

I sold it because I had to downsize but man do I miss it. Most fun I ever had haha.

[@1790jman]

What seat is on yours and what fender elimator did u use I know the video is older lol

[@LOL2YOU]

Sorry for the late reply. TST tail light which comes with the removal and here is the seat (definitely for looks and not comfort lol) www.amazon.com/Replacement-Model-Honda-2016-2020-White/dp/B0B6M7X3VK/ref=sr_1_134?keywords=honda+grom+seat&qid=1675548546&sr=8-134

[@1790jman]

Oh no it’s all good I’ve been looking at the clone for awhile wanted to I guess u say build it lol

[@LOL2YOU]

@@1790jman I ended up sewing hours. I do miss them. If I had to do it again I would get a legit Grom. The clone has a lot of issues all the time but you learn a lot. that 212 swap was the best thing I ever did though.

[@1790jman]

@@LOL2YOU I really want a legit 300 swap grom I’ve seen a few for sale near me I really like to ride one

[@t2d2420]

We're u get that belly pan

[@LOL2YOU]

EBay man. It's from Thailand. I think like 150.

[@jynx4855]

Link for the motor?

[@briizcustoms9543]

So you can cruise during 70mph for long as you want without the bike overheating?

[@LOL2YOU]

I mean I wouldn't take it on Long rides on the interstate, but 50-60 mph areas yes. The only thing is your RPMs will stay high after about 60 so you will definitely need some sort of catch can. Sometimes it fills up after an hour or two and you'll have to empty it so I would suggest something that is easy to drain.

[@LuisPerez-py4zn]

where did you buy the 212 from ? you have a link

[@LOL2YOU]

Yeah man PisterPro: pitsterpro.com/index.php?route=product/product&product_id=1253271 Use the code marcoc for like $145 off and you'll get it to the door for like 900.

[@LuisPerez-py4zn]

@@LOL2YOU damn really I appreciate it was it hard to swap everything over ?

[@LOL2YOU]

@@LuisPerez-py4zn yeah man, no problem. It's actually super easy. Two bolts, bolts right up. You running it with a Vader or Grom?

[@epicmarco514]

Where is this filmed? Reminds me of pittsburgh. Nice bike btw

[@LOL2YOU]

It was in Trinidad Colorado. I moved since then and sold the bike, but thanks man

[@mackman9977]

Got ya

[@warrenpeas]

what exhaust did you end up with?

[@NhanThanh-xc8lt]

How did you mount the exhaust man? Did you have to drill the peg? I’m having a hard time trying to mount mine...

[@LOL2YOU]

I'm at work but I drilled a hole in the rear set right where it meets up near the rear peg and ran a bolt through. Best idea I had haha. Holds great.

[@NhanThanh-xc8lt]

@@LOL2YOUthanks for reply, I’ll drill a hole on the peg then

[@LOL2YOU]

@@NhanThanh-xc8lt let me know how it goes or I can send you pics on snap or help.

[@NhanThanh-xc8lt]

@@LOL2YOU thank you bro. One last question, what kind of drill bit should i use for this?

[@LOL2YOU]

@@NhanThanh-xc8lt just size up the drill bit that fits in the hole of the bracket for the exhaust and use it that way. It shouldn't be that big. Basically if it fits in that hole it should be good. Just find a couple of thick washers as well.

[@t2d2420]

That belly pan tho were u find that I looked everywhere.....

[@LOL2YOU]

Right here man. www.ebay.com/itm/FAIRING-BELLY-PAN-SET-COVER-SIDE-FRAME-BODY-FOR-HONDA-GROM-MSX125-SF-2016-2020-/203215613244?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@250wrecks]

would this fit on a 2020 vader my clutch fell off and i put it back but now it won’t move an inch in any gear i’m not sure what’s wrong took the basket apart and everything

[@LOL2YOU]

The 212? Yes sir. Direct fit.

[@Minimotojay]

Did the oil cooler come with the engine and if it didn't where did you get it

[@LOL2YOU]

Yeah man everything did. All wiring and everything. Pretty good deal. Got mine from pitsterpro lemme find the code that takes like 170 off

[@LOL2YOU]

Marcoc is the code on pitsterpro.

[@Minimotojay]

Thanks and love the bikes

[@LOL2YOU]

@@Minimotojay we sold them to move but thanks man! It was hard to sell for sure.

[@Freshie3]

What part of Arkansas did you move to

[@LOL2YOU]

It was Bentonville but I moved to Texas now lol

[@christianf2485]

Where did you purchase this bike from?

[@LOL2YOU]

I got rid of it now but I got mine from venom motorsports. Just look up Boom Vader 125 and see who has the cheapest prices (there are alot of places that sell it). Just make sure they ship the bike with the MCO (manufacturer certificate aka title). Don't buy a bike that ships it separately or it's a pain in the ass.

[@christianf2485]

I appreciate the info. Also where did purchase the upgrade engine? Sorry to bombard you with questions but I would like to do the same mods as you did. I watched the video of you riding it and sounds better than the 125. Thanks again

[@LOL2YOU]

@@christianf2485 yeah it's amazing. I had a loop exhaust towards the end and it's the best sound you'll hear! tboltusa.com/store/pitster-pro-zs-212cc-2v-engine-p-11348.html "Marcoc" code will get you down to 900 shipped. ZoOM Exhaust Honda GROM 125 MSX 2013-2019 125SF Full System LOOP Low Mount Black 2SLZ www.amazon.com/dp/B01LSABZB8/ref=cm_sw_r_apan_glc_i_9M8SX4STREP7VC4BMC8M?_encoding=UTF8&psc=1 Expensive but the best sound when you get ready.

[@mackman9977]

Made me order myself a bike👍🤣

[@LOL2YOU]

Haha congrats man! I miss mine. I ended up selling it. Get you a decent carb right out the gate!

[@kylegonzol6180]

Where did you get the plastics from?

[@LOL2YOU]

www.ebay.com/itm/Honda-Grom-MSX125-SF-Mid-Fairing-Belly-Pan-Set-Honda-MSX125SF-2016-2018-/184755760131?_trksid=p2349624.m46890.l49286

[@Wheeliann]

still got it? how's it been?

[@LOL2YOU]

Ended up selling it. It was fun man, but DAMN I'd buy a used Grom or new. The problems you get on the chinese ones are not worth it! SOOOO many things broke way too soon.

[@Jordanfromtexas]

Ha!! Nice ST bruv! 😂 I’ve got a Grom and a black ST myself. I kinda wanna get rid of it though and get something I can carry the bikes with.

[@LOL2YOU]

Haha thanks bro. Just put an electric cutout in it. I got rid of the clones cause we moved but we fit both in the back of a 16 Colorado.

[@Jordanfromtexas]

@@LOL2YOU hell yeah good stuff haha. I actually stuck mine in the back of a Hyundai palisade when I bought it.. the dealership guys asked if I needed help loading, I said sure thank you, then they proceeded to sit there and scratch their chins as they watched me finagle this micro beast into it. I had seen people loading them into little hatchbacks (Honda fit!) and figured I’d be able to load up in my ST no problem… 🤦🏼‍♂️

[@Jordanfromtexas]

@@LOL2YOU do you plan on replacing them? Like with another mini moto or scooter or anything?

[@LOL2YOU]

@@Jordanfromtexas probably eventually. We're just in an apartment now and my girl is going through school so maybe in a few years. Still have the helmets and license so it's bound to happen. I do miss them.

[@Jordanfromtexas]

@@LOL2YOU it’s hard to walk away from that open road, wind in your hair, 80mpg 😝

[@ernestoduran5610]

Does the exhaust bolt right on?

[@LOL2YOU]

Nah. You either have to take it to a shop and get it welded which most of them don't like doing it because it's stainless steel or I think on Amazon you can buy one that is shaped properly. I can find the link.

[@ernestoduran5610]

@@LOL2YOU thanks bro I would appreciate that.

[@LOL2YOU]

@@ernestoduran5610 MSX Motorcycle Exhaust Muffler Middle and Front Link Pipe Full System For Honda MSX 125 / Grom 2013 2014 2015 MSX125 Slip-on www.amazon.com/dp/B07K68WYRY/ref=cm_sw_r_apan_i_D0BFF99H6VW7BDXWQ7WD

[@clonestarr3466]

What rear view mirror is that?

[@LOL2YOU]

It's just one off of amazon. Supposed to be on the handlebars but I just moved it inward.

[@josecunsako31]

Where can I get the 212cc the link don’t work ?

[@LOL2YOU]

Looks like the site is down for maintenance. Try a bit later? It's PitsterPro. Use the code "marcoc" to get like 145$ off. It's like 900 to the door.

[@NopeKickEm]

Amazing camera quality! I noticed your vlog layout is on 4:3 instead the typical 16:9. Did you prefer it that way?

[@LOL2YOU]

Accident haha. I'll be changing it in the future for sure.

[@NopeKickEm]

@@LOL2YOU oh gotcha! looking forward to watching your vids man!

[@LOL2YOU]

@@NopeKickEm I got a new exhaust (Zoom Loop) I'm getting putting on tomorrow so after I get that on I'll be making another video.

[@NopeKickEm]

@@LOL2YOU Hell yea man! I need to hear how it sounds, can't wait to see it!

[@LOL2YOU]

@@NopeKickEm I got u!

[@davidxj73brown70]

Where can I get the motor from

[@LOL2YOU]

pitsterpro.com/index.php?route=product/product&product_id=1253271 Looks like it's out of stock but call them. Use the code "marcoc" for like 145 off

[@danl5632]

Awesome bike. Where did you purchase it?

[@LOL2YOU]

Thanks man. I got rid of it now but I got mine from venom motorsports. Just look up Boom Vader 125 and see who has the cheapest prices. Just make sure they ship the bike with the MCO (manufacturer certificate aka title). Don't buy a bike that ships it separately or it's a pain in the ass.

[@willyanderson2644]

1 month since the video, how has it held up? Top speed? Feel comfortable with highway riding?

[@LOL2YOU]

It's been pretty good. Couple of learning curves like: - you need to catch can at those high speeds since there's a lot of oil blow by from the breather. You don't want oil getting all of your tire like it did with me. - too speed has been like 75, but cruising at 55-65 is nothing. Hills are easy too now. 5 gear makes a hell of a difference in RPM. - my girl broke her starter chain by revving the engine when she tries to start it 🙄. She learned that lesson but was cheap and easy to replace. Besides that, it's been pretty solid. As with the bike itself, you definitely need to be mechanically inclined to make up for any problems that may incur, but it's so worth it.

[@shanemandoh]

How is it a year later?

[@MB_JOSH4159]

Must be cool to cruise with your lady

[@herondope5675]

whats the dry weight?

[@LOL2YOU]

198lbs. Max is 330.

[@lostbee8368]

What's the speed in each gear

[@shearenergy8203]

Depends on wind speed rider and the xperience😮

[@jrnumex9286]

for me those "chain saw" mufflers are annoying a F. no louder than a Harley d but they don't have the finger nail chalkboard deal.

[@LOL2YOU]

Haha it's a decent starter muffler. I ended up getting a better one before I sold it that was way better and deeper. Hard to sound cool at 125 or 212 lol

[@samuelajulip2117]

Are you selling this now?

[@LOL2YOU]

Nah I sold it last year man.

[@samuelajulip2117]

@@LOL2YOU man it’s for sale now for 2400 and it’s tempting lmao

[@LOL2YOU]

@@samuelajulip2117 oh damn really? They must be selling it then. It was in NW Arkansas.

[@samuelajulip2117]

@@LOL2YOU yeah that’s where it’s being sold in berryville

[@ehabassaf6204]

What is the maximum speed of the 212cc??

[@LOL2YOU]

I've been 84 after a proper carb tune. Nothing higher than that yet. I don't think I want to go any higher than that on the size bike though LOL. I just like that it goes 55-65 with no problem whether you're on a hill or not.

[@danjim7056]

@@LOL2YOU hell yeah! That's impressive and probably a bit sketchy going that fast on that little bike....I want one

[@SinisterAngel1]

I'm trying to grasp the meaning of "crazy" when the highest speed you've gone was 60 on a highway...just saying, the 125CC can reach that. Perhaps it's the the fact that they're inexpensive bikes out of China. I'm reconsidering purchasing a Vader and getting a Kawasaki Z125Pro or a Honda Grom.

[@rylee4796]

125 can reach but cursing at that speed strains it

[@treeLiter]

Doin mine right now

[@travisparisek1412]

This or a grom

[@LOL2YOU]

If your mechanically inclined and on a budget I would go with this. If you're not looking for a whole bunch of problems then get a used Grom or new one. Things will break on these bikes so you'll have to know how to fix them or at least research to fix them. In a weird way it's a fun process because you actually learn a lot more, but it just depends on you.

[@travisparisek1412]

Thanks man! I have knowledge and tools to work on stuff just dont want a pos if you know what i mean

[@briceknight4290]

I live in the nwa too

[@LOL2YOU]

Well if you know anyone looking for a bike for sale I'm selling this one and the white one. 2300 for the blue and 2000 for the white.

[@briceknight4290]

@@LOL2YOU I wish I woulda saw your channel earlier I found my buddy a grom that was wrecked 2 weeks ago and helped him fix it

[@LOL2YOU]

@@briceknight4290 that's nice of you! Keep an eye out if you know anyone.

[@yellowveedub]

I thought about fabricating a 212 in my z125

[@LOL2YOU]

Dude you should! I'd never go back from the 212. It's perfect for the bike.

[@yellowveedub]

@@LOL2YOU I have a thumpstar I built a 212 for. Thinking of swapping it into my z125. I should just to see if I could do it. Swap efi on the 212

[@LOL2YOU]

@@yellowveedub yeah that would be nuts. It's carbureted so no EFI needed lol

[@yellowveedub]

@@LOL2YOU modify the intake manifold for injector,. I could even get a simple digital system stand alone ECU unit. I installed one on my car. They can configure for a single cylinder. Lol. Would be silly

[@LOL2YOU]

@@yellowveedub oh nice! Yeah that would be cool

[@shawngram1991]

You girl drive harder than you

[@LOL2YOU]

😂😂 She really does. She likes the speed.

[@Drillstheruler]

you driving so slow bro

[@Drillstheruler]

Jk are you doing a high speed vid night cant wait till i get my 190

[@terjekristian2007]

top speed 212cc bike 120+km?? 20-25hk bike 212cc engin??

[@gizzyguzzi]

wait, what? throttle during start causes it to break starter chains?

[@LOL2YOU]

Lol oh yes. that's how she broke hers. Unless you're being sarcastic 🙄

[@josephsaucedo8691]

This is oil cool if you rev on start up you will distroy your motor pretty fast they say to let it worm up for 5 min before you hit the gas so everything lubes. And yes if you keep hit the starter multiple times in a row it can snap back lash.👌✌️👍💯

[@jonoguin1132]

Where did you get the motor?

[@LOL2YOU]

@@jonoguin1132 used to be Pisterpro.com but it looks like they might have stopped selling engines. Here is a link to the same exact engine though. Maybe eBay or somewhere else will sell them www.ebay.com/itm/266148481510?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aaj9v77oQRC&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY