THE AIRBAG ROLL-IN IS HUGE!!

[@jimtom3074]

MATT THE MAN OF MANY TRADES JONES...... KILLIN IT 💯💯👍🏼👍🏼🤟🤟🤟👊🏻👊🏻👊🏻 Can not wait

[@BennyZ72]

Hey Matt, wash the whole run in with wood sealer. It will make it last. Just keep topping it up from time to time and the wood will not rot. Keep up the good work. Cant wait to watch you launch the air bag. Peace!!

[@Alex-ms5jx]

Your inspiring loads of people, including me I’m building my first dirt jump bike atm just waiting on parts

[@TomJeffery1]

Haven’t even watched the video yet and I know it’ll be a banger! 🤟Also just wanna say you are by far my favourite KZbinr and you seem like such a funny, genuine guy and I would love to meet you!

[@jmoto7260]

That roll in and trans turned out awesome

[@dimensionsofearth]

Man your a mad builder looks very well done!

[@chandlerferguson8668]

Absolutely epic dude! The build looks so dope and the edits were fire keep up the good work!

[@riley.grange]

Dude u are my favourite youtube by far I love every one if your vids you put so much effort into your vids. You are an insanely good rider. You deserve soooooo much more subscribers, keep it up man. 👍👍👍😀

[@dunnmx6106]

good effort on that roll in looks nuts! well done matt the carpenter lol

[@Gt3rss]

Amazing man keep up the good work! Cheers! Any way you could try a 360 back flip no hander?? Challenge but send it mate!!🤘🏽

[@ploperdung]

That's ridiculous

[@TaylorBarronn]

That jump is crazy, can’t wait for you to send it!!!!

[@matthewharding6245]

Love your videos, can't stop watching even though i've never jumped a bike in my life! Obviously too late now but maybe a suggestion for next time, use marine ply as it will last 10 times longer and wont delaminate and for the curved sections try using two sheets of 9mm ply. If you stagger the joints and use waterproof wood glue between the sheets it will be super rigid and v strong.

[@WrightBrosDJs]

Yoooooooo, finally

[@Jocons]

I can’t wait to see it complete

[@LiftedAdventures]

This is great bro. You are totally living the dream. Great video showing it all. Need some of this in my yard. Dont know if id hit it though.... lol

[@Maxdd7]

Hey Matt, Compound looks cool, maybe dig some holes and put some pressure treated lumber in the ground to hold that ramp just off the ground to keep it dry. maybe it will last a tad longer.

[@RyanCranage]

Awesome Matt! Cover the wood in a few coats of weatherproof paint. I had my 5 foot kicker (You can see it in my YT display pic) and 6 foot quarter painted in purple outdoor wall paint and they lasted considerably longer then my un painted kickers had in the past.

[@lildee1200]

As a scaffolder... that tower makes me a bit nervous 😂

[@MattJones]

So much respect for you man. You guys are crazy. This scared me so much haha

[@darrenwilliams6827]

Nice!! Matt👌is there no end to your talent m8😝@ least when you stop ridin you can take up the tools n'b a chippie😁

[@Cleanmusiccuts]

Saw this build on your Instagram and I need to build something like this on my channel it’s insane!!!!!!!

[@melwalshmtb9121]

I'm subscribing to u

[@michaelbrown8416]

+1 sub from me mate

[@Cleanmusiccuts]

Cheers guys

[@beardedvikingmtber]

Awesome 🤟🏻 I’ll look forward to some crazy vids

[@dawnkangas2968]

Absolutely awesome 😎

[@kdirifjcjmdkejdjufhvhdnejd7020]

Matt I’ve only been watching you for a couple of weeks but when I saw this video I’ve never clicked so fast.

[@NWTrailSeries]

Siiiiiiick. Cant wait to have a playground to build some stuff on! Also cant wait till the next video! Get er done!

[@gruffrees9807]

This is going to be insane can’t wait Matt

[@thomaswilliams9408]

Tou could use hardwood ply or marine ply which would last alot longer as its water resistant but does cost abit more than pine shuttering ply. Keep it up!! Love these videos.

[@ValeraPikhota]

Amazing video as always!!!)))

[@elcapitanotim214]

Sick vid, love seeing the builds

[@IzGrog]

That’s sick dude!

[@Raiderofthelostloam]

We used to have a Indoor skate park in Birmingham about 20 years ago with a foam pit with a 30 foot Rollin used to love sending it on my skates into it. They had to take it down in the end as so many kids got hurt fun times

[@gavinpurse8013]

That 3 way routine was a thing of beauty hahahaha

[@bio-metric-1016]

Looks sick Matt

[@glenfergusson41]

Look to sick mr Jones

[@williamevans4863]

Nice job bro 🔥✴

[@bolas_dirtbike2066]

Why would any one dislike you because this is sick

[@nate8551]

Good to see the rents helping out

[@xAGxEmperor]

He’s such a nice and positive person lol

[@mejustanormalguy4742]

Looks great only thing I'd do is the scaffold bar cut out could do with a strengthen timber vertically or even a off cut of ply

[@thatlad8442]

I'm not mystic meg! But I can see Pilgrim dropping in on that quad thing lol

[@gregmckenna169]

awesome matt

[@mtbmikolaj2459]

Matt you should defo make a double height roll in by making one flat lower than the other for different roll in speeds and also to add more flavour to the compound 😉👌🤔🤑

[@Montana909]

Looking sick

[@sloemost5809]

Would it be worth putting some wood preserver or weather shield treatment on the timber under the ply?

[@gbvtt76]

wood directly into the ground isn't really the best idea, the moisture from the ground will make it rote way faster :/ you could have put a waterproof cover underneath

[@freerider8737]

Adraps its only going to be sitting on the ground like all of his ramps are itll be fine hes going to dig all that grass out

[@campbellclark8221]

I reckon add some kind of treatment to the wood too if possible. Maybe bed in the sides with stones for better drainage?

[@gbvtt76]

FreeRider it’s not because he always done it like this that it’s the good way, btw he already had roten wood like the quarter he is rebuilding

[@freerider8737]

Adraps yes and no itll help for sure but c'mon this is matt. also main problem was the quarter was stright ply on mud. most my wood kickers at mine last 2ish years before needing new ply wood and the base and frame work has lasted as long as ive built them. granted this isn't uk weather

[@gbvtt76]

FreeRider i’m not saying that it‘s rubish, just wanted to underline that it’s a shame, it didn’t need really much effort or money, and that he should have done it at that point.

[@olle3509]

Would love to see you hitting the airbag on the mini bike!

[@alfiepeake9783]

Sick jumps 🤘

[@craigluscombe3310]

The roll in is looking good, it may end up as nice as Sams 😂

[@Tomo-fg8xj]

Give ur compound a sick name 🤙🏻🤙🏻

[@brainclerk4431]

Matt varnish or paint the run in to protect it and make sure you mix loads of sand in the paint for a better grip . you have a lot of followers painfully waiting so pull you finger out mate and get on it !

[@changmush7024]

Sam and George looking productive 😂

[@LucasdeMalpas-Player]

Looks massive

[@liamtaylor2478]

get a garden weed sprayer and the spray the hole roll in side and out in Creosote its a really weather resistant wood protection. providing you coat it about once a year it should last years

[@deffojeffo]

Should be a Matt Jones drinking game - Take a shot every time Matt says smash or stoked! - Forgot Insane!

[@jacobmurray2126]

Great video as always, you should really be wearing hearing protection when using that monstrosity of a grinder as well as loud power tools tho haha

[@daveevs18]

So so sick! 🤘🏻🤘🏻

[@aidenmtb6371]

Sick can’t wait for the air bag

[@safetyboots2642]

I want to see your best attempt at riding up that roll in when its done XD

[@hondacota4rt]

When building the wooden kickers, cab you talk about kicker geometry? Hight, length, radius and for different skill levels etc.

[@JayJay-zr7fu]

Putting all that effort to build it defiantly makes sense to put some effort in to wood preserve it with something. Also the bottom bit needs digging around so that it’s not a low point. Ideally sit it on some slabs or bricks not more wood to pass the moister through.

[@olliedelaroque]

You should get scaffold stairs for In between to get up to both

[@alexashford2693]

such good vid can't wait to see more

[@colmmcdonnell6074]

That's the same jigsaw you used to make the massager with the golf ball

[@ikonalex1878]

Do you have brother called flyn

[@colmmcdonnell6074]

@@ikonalex1878 no

[@mulletmoore5811]

Also build a drop like the start of your original ramps to practice drops Edit: maybe build a ramp of to the side to start a pump track

[@olrenison]

Looks dope. :-)

[@mistacoz]

Forecast - incoming sendstorm with 100% chance of bangers.

[@charliehawkridge2842]

great vids

[@danieludale4684]

Yes Matt Jones 🤟🏻

[@georgemay4877]

This was sick

[@baileyleask678]

you should flair the new drop in once it’s done😍

[@ryanambler8580]

Very excite!

[@goofyfoot390]

Awesome job Matt! 👍Do they not sell pressure treated lumber over there? That wouldn’t last three months here in Florida😬

[@snaithobrodie]

Just subscribed but have been watching for a year

[@samuelparamor3726]

Yess, ive been waiting for this video!!

[@MostFolkCallMeOrangeJoe]

Saw the trenches for the footings and thought "Ohh nice he's gonna pour a slab and do it properly". Oh never mind

[@piotrlobacz]

You need to sit those on concrete or bricks otherwise ply will start to rot and it'll all go to s**t. It'll become unstable and out of level bud. Won't last a year.

[@uteboy86]

It's on concrete footings mate you can see them under the ground.

[@thatlad8442]

I mean this with love bro but ya like a posh organized harry lol

[@landonromeo1447]

I love your vids

[@lukasalej5710]

Matt what is the green thing on the sides of your big landings. carpet or moss?

[@sixtysecondsofstephens2386]

Looks so safe compared to Sam pilgrims set up. Great work.

[@peeejayz]

Confirmed this is training for nitro circus ;)

[@jbrownfilms8816]

So sick

[@jimbo4505]

hey matt is your mulch jump all mulch or is it a layer of mulch over something else

[@denniskropf95]

Sick bro!

[@isaacpinch9854]

Yooo I can't till the airbag is rideable

[@Kev.in-Bike]

amazing

[@kemosabikeemanart]

Gettn Real With It!

[@larsvaneesbeeck9631]

hey Matt, I want to build ramps in my Yard to, somthing like a 1.8m kicker but I don't know how steep/ what radius I schould use.

[@ianbirkett6542]

sooo sick

[@emanuel290]

How you going to stop it rotting??!

[@harrisonmoore3243]

If you want to make the ply wood last longer put paint clean coat on holds all the water out last for way longer

[@CanIgetsubswithnovideos-we3ph]

Hello again

[@cxnradiz2072]

Legend

[@philipb867]

I only live down the road if you ever need any help with a spade or hammer!

[@klonkrieger121]

Nice vid. but tbh I enjoyed the old timelapse music more than the one used here.

[@evancameron9943]

He got me into mtb

[@aMilling]

Do i see Marin colors on that 16"?

[@tobyhyland4642]

More building videos👍

[@kianghiaei9390]

Maybe go in with a spray gun (the big ones for industrial painting) and Spray all of the wood so it doesn’t rot

No wood oil?

[@mulisha0351]

Harry mains hack job of himself could learn a thing or two from you Matt on building.