The Basics of Video Creation using Video Pad Pro (Professional) by NCH Software Part 1

[@tasteofnebraska]

Here is the link to part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@Izak80]

I’ve got a question regarding effects, how do i make an effect (like snowflakes for example) last for a certain amount of time? When i tried it just recently and added it to one of my video-clips it lasted the whole video through. I would just like to have it for a couple of seconds at the beginning of the clip? Thanks in advance!

[@tasteofnebraska]

@@Izak80 I just checked the FX menu and there is not stop/start or duration time for the effect but what you can do is use the red bar to cut where you want the snow to start, cut where you want it to stop. Highlight the clip where you want the snow to happen and apply the snow to just that clip.

[@Izak80]

@@tasteofnebraska Thanks for the Quick reply. I sort of tried that but from what i could see cutting (using the scissor icon) a video-clip made the video freeze for a millisecond right where the cuts were and i don’t want that to happen. I’m gonna try it again though just to be sure.

[@tasteofnebraska]

@@Izak80 That may only happen in pre production.

[@Izak80]

@@tasteofnebraska Ok, i’ll export the video then and see of it’s still there. Thanks again.

[@neiljamesthompson2787]

There are a lot of really bad Videopad tutorials on here, but this is a great example of how it should be done. Clear, easy to listen to and follow. Great job Travis!

[@tasteofnebraska]

Thanks for watching! I haven’t done a lot of tutorials but I may need to do a part 2!

[@tasteofnebraska]

Here is part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@livingwithgraceinjapan]

Indeed! Clear tutorial!

[@johnbusalachi6183]

I agree with Neil James Thompson's assessment. I am totally new to this and found this VERY informative. We'll done, Travis!

[@veronicaanderson4688]

Great job

[@iconoclad]

Thanks heaps. NCH's tutorials don't cover any of this. Now I can get started.

[@tasteofnebraska]

Glad to help!

[@samuelseager6785]

A perfect tutorial. Well paced, very nicely explained, and you covered just the essentials to get started. As a bonus your voice was not overly annoying. Good job!

[@tasteofnebraska]

Thanks man! I’ve been told Chris Pratt sounds like me! Thanks for watching!

[@nerdsrejects-productions2563]

I have been using Videopad Professional for about 11 years and have found it to be great for short movie creation. It has a lot of visual effects I am still discovering. Very good value!

[@tasteofnebraska]

Thanks for sharing!

[@sadafchowdhury2885]

Just finished part 1, moving on to part 2! Safe to say this was the best video made on videopad tutorial by a large margin! Your videos were really short, simple and informative. Bro, you owe me my first yt video!

[@tasteofnebraska]

Thanks for watching! Yeah, they run for a while but I had so much to cover in the first part. Thank you for the compliment and thanks for watching!

[@2HAMMERS1]

Great just bloody great I owned this WavePad Editor for about a year there might be like a few days left till it expires AND NOW I FIND YOU and your AMAZING Tut I have learned SOOOOOOOOOOOOOOOOO MUCH in 25 mins from you

[@tasteofnebraska]

Thank you for watching!! I appreciate the kind words!

[@emadshifan1222]

You are the best 🙌! I was going to start editing my videos and no one explained how to use this software better than you! I cannot express how thankful I am! THANKS ALOT!

[@tasteofnebraska]

Glad to help! Thanks for watching!

[@tasteofnebraska]

Here is part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@reclaimingyourvoice]

Learning this in 2022. I greatly thank you for this tutorial. Legit NCH needs to pay you! I am starting a youtube channel and this is the editing program I started playing with. You helped me make the decision to purchase it. Thank you again.

[@tasteofnebraska]

Thanks for watching! Hey, I’d be happy to make vids for NCH if they call me! But seriously, my channel is monetized so I do make some change from the videos people watch. Thanks again!

[@DebraBerry]

Thank you, thank you, thank you! I have watched this video twice, the second time I took notes. Your demo and instructions are on point and were easy to follow.

[@tasteofnebraska]

Thanks for watching! I’m glad to help!

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@bitsnpcs1232]

Thanks for being short and sweet. You covered a lot of topics without any waste of time. Really appreciate that.

[@tasteofnebraska]

Glad to help! I don’t do a lot of tutorial videos so I’m glad you enjoyed it!

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@twitwicki1]

Well done! I just started using VideoPad in the past week, and this video has been of immense help. Now I'll go back to my video clips that I'm making to illustrate gardening techniques and use some of the effects you've described. Many thanks and I've subscribed.

[@tasteofnebraska]

Glad to help, thanks for watching and welcome to the channel! I may make another part in the near future!

[@person9578]

if u need a activation key lmk

[@marcaslam3323]

Best informative and concise tutorial I've watched so far. Thank you!

[@tasteofnebraska]

Thanks for watching!

[@Deano_MOOD]

I just downloaded this app and I am definitely going to be looking up to this video as I try to get used to this app.

[@we-are-electric1445]

Excellent video. Went through lots of videos yesterday to try to find one that would get me to a point where I could make basic content and get it uploaded. Every video I watched I soon found was poor. I then found your video and in a couple of hours of watching and trying the software alongside with my own videos and pictures I am confident I am in a position to produce a video and get it uploaded. If anyone reading this is looking to get started with Video Pad then this is the video to watch first.

[@tasteofnebraska]

Thank you for watching! I'm a bit long winded but I wanted to cover the most important details so you could at least get a video finished.

[@we-are-electric1445]

@@tasteofnebraska It's not long winded,it covers enough detail for someone new to the software. It is easy for someone familiar with the software to get casual with the mouse - so it is not always 100% clear what they are selecting. The number of times I have seen a mouse cursor whizzing round the screen and I have no idea what the person is clicking on. People presenting videos often miss the point completely and the video is rendered useless very quickly. When I see a video like that I just move to the next one quickly and try that instead..After all, your video was less than half an hour and has got me to the point where I am confident of getting my first video together.. I managed to emulate most of it on the first pass - revisiting it again to cover a couple of points that didn't work so easily first time. I've spent less time on your video than I have watching other videos that I have given up on. I hope this post will encourage others to stop at this video and watch it through. A second video on more use of text and also putting your own voice over at different points of the video probably covers most of what I ever see on KZbin videos.

[@tasteofnebraska]

@@we-are-electric1445 Thank you for the feedback and I think I will make a part 2! Thank you for watching!

[@we-are-electric1445]

@@tasteofnebraska I'll await it. Just don't make it too complicated !

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@DSeisun1]

Definitely one of the best tutorials. Thank you.

[@tasteofnebraska]

Thanks for watching!

[@EltoqueBoricua]

Hi,i have a question,i export my video of 10:57 but when i export only 8:23 got export,i wonder why it did that,first time that happen.thank you

[@tasteofnebraska]

It sounds like there may have been a software glitch. Try opening the video back up on the program, click “save” and then try to re export.

[@AussieWalker.]

Hi Travis, Ive had my VP for a few months and rarely use it. After watching your video I think I will use it now! Thanks for your video! 😀

[@tasteofnebraska]

Cool! It's pretty easy to use!

[@musichoney7362]

Thank you so much for this tutorial, its the best one out there. ☺ Just the right one at the right time, I'm so glad I found this video👍

[@tasteofnebraska]

Thanks for watching!

[@lanee6137]

i caint thank you enough, this is the start to my youtube chanal

[@tasteofnebraska]

Glad to help and I hope your channel finds success!

[@thatscrewedprude8717]

Thank you so much for this knowledge. I have an idea what I'm doing now.

[@tasteofnebraska]

Glad to help! Thanks for watching!

[@iangmarshall]

Hello there Travis, Many thanks, much appreciate all the vital tips you give us... What would be the difference - when EXPORTING the project - in observing the process you give us (TimeCode @ 20:00) which seems totally logical, and just hitting the 'export to You Tube button' the program gives us in the export list? Cheers

[@tasteofnebraska]

The reason why is that I save all of my videos on an external and second internal hard drive on my computer. By doing a traditional export I have a copy of my video that I can save wherever it may be necessary. Uploading to KZbin is fine but you get less initial creative options vs. using the KZbin creator studio but at least Video Pad gives you the option.

[@tammyconrade1234]

Thanks for this tutorial, clear and concise. I really appreciate the time you took doing all of this.

[@marcandnia]

I'm having problems with glitches in my transitions can anyone help me with this im new to the soft ware and cant seem to figure it out.

[@tasteofnebraska]

When you export the video and watch the final product the glitches in the transitions should go away.

[@T0KY03]

Bro thank you for spending 25 minutes of you're time to help us

[@tasteofnebraska]

Thank you for watching! When you get a chance check out my advanced features video on this video pad pro!

[@KaronJames-v8i]

Mine back off ,how yours doing

[@isabelcone6330]

I would love an advanced version of this! ((voice effects, zooming out, etc)) I can''t find any that show the advanced features!

[@travisp11]

I think I’m gonna film a part two this weekend so hang in there. I have been making a list of stuff people want to learn and will see what I can do!

[@tasteofnebraska]

Here ya go! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@aayanshahwar1989]

THANK You!!! I literally took notes and your only put like 2 ads, I hope you become very successful on Yt i wish to be like you when i grow up

[@tasteofnebraska]

Thanks! Unfortunately, KZbin chooses which ads play and how often anymore. I used to only have them play befroe and after the video but now YT has them play during the video.

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@Deano_MOOD]

So I just purchased the Master's Edition for 50 USD... Just to be clear, that is a one off payment right?

[@travisp11]

That is correct. You get that version for 1 computer. Just a one time cost.

[@Deano_MOOD]

@@travisp11 thank goodness, because that transaction definitely gave my bank account a shock lol. Thanks for the support.

[@tasteofnebraska]

No problem. The only issue I ever ran into is when they do a whole new edition, they tease you with new features in the current version and say “if you like this feature, upgrade to version blah blah blah right now.” That part is annoying but I just avoid those features

[@EldeesMyth]

I doubt I can say more than's been said already but this IS the finest tutorial video I've ever seen. You got my subscribe that's for sure.

[@tasteofnebraska]

Thanks for watching! I may go back to the part 2 tutorial and see what comments made and put together a part 3

[@jeripreston]

Great tutorial! I have a question about overlaying videos and images. In your example, the coffee video you placed in the upper right hand corner, is there a way to blur the edges of these overlays so there isn't such a stark difference between the overlay and base project?

[@tasteofnebraska]

When you insert the second video using the “motion” effect there is a little windows that pops up that allows you to modify the Picture in Picture you are seeing. There may be an additional effect that you can select from the effects box that show up on your screen. I will try to see if I can find you an option today because I know you can do more than just insert a second video on the program.

[@jeripreston]

@@tasteofnebraska Excellent - I'll give it a go and thank you! Looking forward to learning anything you discover about the topic.

[@magikmanchroniclespodcast4501]

Thank you for helping me learn the basics and helping me get my podcast going better with your help

[@tasteofnebraska]

Glad to help!

[@TwelveWatts]

Thank you! I will now try this video editor, thanks for your helpful instruction video;-)

[@tasteofnebraska]

Awesome!! Thanks!

[@wagonroad534]

After about one minute of watching I moved the red dot back to start because I missed something; and that’s the way things went, over and over again, all the way to the end. I concluded that Travis’s audience is composed of people who have experience in video editing and have huge I.Q.’s. I’ll get it eventually, it just takes time and patience, over and over again.

[@elite5336]

Thank you very much for this! ^^ I am making videos, but I am not posting them, I am watching them myself and my family can watch them as well. So, I got an editing app, which was VideoPad, and I was like "How on earth do I use this?" so, thank you very much.

[@tasteofnebraska]

Glad to help and thanks for watching!

[@Dojoprobablydaddy]

my man the content you explain thoroughly i became your fan today i am a streamer my self on Facebook and you bruh are a legend

[@tasteofnebraska]

Thanks!

[@spybug3267]

You definitely have a talent for tutorials... wish this would have been around before I had to stumble around trying to figure this out on my own. I learned a lot of new things watching your video and am getting ready for part two. Video Pad has everything I need, I love the process of creating videos. BUT! It freezes and locks up my PC every time I use it. I have to use the task manager to shut down the computer. (I've tried Taskm > file > new task run explorer.exe) Still locked up! - Fortunately, it usually saves & reloads when I'm up and running. A great program...I just have to solve the freeze up.

[@tasteofnebraska]

Be sure to check out my advanced features video for Video Pad Pro! As for the system freezing, do you have your PC with all updates installed? I know it would cost money but you may be better off paying for a fresh download of the program and get the newest version.

[@rongray4572]

Excellent : Informative : Clearly Explained !! Well done !

[@tasteofnebraska]

Thanks for watching!

[@ourlifeinframes8169]

Would you know the exact dimensions of an image that can fit perfect on the screen without scaling or distorting the image? TIA

[@tasteofnebraska]

I would guess that 1920x1080 would fit the screen with no mods given the resolution of the program I am running produces 1080p video.

[@nareefahussain9335]

How can we see what you're doing if you have subtitles on the video..

[@travisp11]

Turn off the subtitles

[@waynekrum8026]

Great video for the beginners. I have a lot of clips of an Appalachian trail hike I want to make into a video. This should help tremendously.

[@tasteofnebraska]

Thanks for watching!

[@syedmubashshir2631]

YOU CAN GET THIS AS AN APP IN MICROSOFT STORE IN PC FOR FREE

[@sbd8825]

@din0commitsarson really

[@jeansroses7249]

yeah, but you have to have a microsoft acct

[@ScottOuelletteGuitar]

I have to say, this was a well made tutorial. I've been making videos for my youtube channel on Windows Movie Maker for over ten years and I've recently bought a new computer with Windows 10 (which doesn't support movie maker) So I bought VideoPad, but found it to be very overwhelming. Your video helped a great deal, thank you very much!! Scott.

[@tasteofnebraska]

Glad to help. The key is to only focus on the features you need and then slowly learn how to do more. I agree. When I first used it I was coming over from Cyber Video or Cyber DVD so the transition wasn’t too rough.

[@ScottOuelletteGuitar]

@@tasteofnebraska Oh yes, baby steps! I do like the way VideoPad is set up, and I've been using WavePad for well over ten years, so that helps when using VideoPad. Thank you again!

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@Woven_n_Yarn]

I do a lot of 'reels' on my channel, but seriously thinking about getting into more editing options. Thanks so much for this tutorial. Very well explained :)

[@Constantin198413]

ive been looking for a user friendly program for simple editing and you sir have answered the call with this video . ! you EARNED your likes and subscribe ! THANK YOU !

[@tasteofnebraska]

Thanks for watching and check out my part 2 when you get a chance!

[@judyblair9570]

So helpful. I'm a beginner and learned the little bit that I need to know in about 10 minutes. Thank you!

[@tasteofnebraska]

Glad to help! I will be releasing a part 2 very soon!

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@TailSpin46]

Awesome, ... thanks. I've been stumbling around with VideoPad but not really getting videos that I'm happy with. This will get me going with the basics.

[@دررسياسية]

the best tutorial ever seen for NCH

[@tasteofnebraska]

Thank you! I hope it helped!

[@bluiegirl2822]

I am a newbie to editing and some kind of needed to learn.. I haven't finished watching but it did help a lot~ The instruction is so clear. I am way to the remaining 10% of the video. Recommended~~

[@tasteofnebraska]

Thanks for watching!

[@trashpanda1332]

THANK you I'm so glad that I can go frame by frame to make some really good edits

[@tasteofnebraska]

Right on’

[@GoreChick]

Thank you so much for explaining everything. It was a pain in the ass to try and learn how everything worked

[@tasteofnebraska]

Thanks for watching!

[@lovevsfear147]

Which version did you buy and is it subscription based

[@tasteofnebraska]

I will check when I get home but the program is not subscription based. You buy a version that gets updates until a new series is released and then if you choose you can buy the newer version (which I have never done). The version used in all of my videos was purchased in the summer of 2020.

[@tasteofnebraska]

Version 8.42

[@jodellstevenson6207]

Thank you so much. This has taught me more than the tutorials from the program.

[@thatmtbguy5211]

New to video editing just used the software last night for the first got my rough draft for my video done hopefully this will help me make it even better thanks i appreciate it

[@tasteofnebraska]

Thanks for watching! I also made an advanced features follow up video to this one. Enjoy!

[@KingdomUploader]

Got any more tutorials? I need to see only one clip and then how to split, cut out and delete a section and then splice back together - and I need to drag the individual parts onto the Storyboard, rather than the timeline - and then save. Any Joy? Thanks!

[@tasteofnebraska]

Check my channel. I link and advanced features videos at this end of this one or maybe in the comments or description box. I did a part 2

[@加园小静]

Hi, How to create a thumbnail use Videopad when launching to KZbin ? sometime youtube say the size is bigger than 2MB when i use the videopad to take a snapshot in size 1280x720. Thanks

[@tasteofnebraska]

I'm not sure as I don't upload straight to KZbin. I usually do a screen shot and then crop down my image for thumbnails.

[@加园小静]

@@tasteofnebraska thanks. how to crop down your image?

[@roberth7707]

Provides nicely for your good guidance. I just bought the program needs a good start.

[@tasteofnebraska]

Excellent! Thanks for watching!

[@Falconurbex]

How do i add a arrow pointing to something in my video if u can help me with this i would appriciate it thank you

[@tasteofnebraska]

@@Falconurbex I’m gonna have to check and see if there’s a special character insert that you could use you would think you could put it in when you insert a text box

[@mohsenkeikhavani7761]

Hi , i am wondering how can i change language in GUI ? i bought a version from mkicrosoft store but i dont know what is the language , it is not english that is why i ahave problem to use it, i will be appriciate to help me.

[@joansanaker6791]

Thank you so much. I have had to restart my project 4 times because I made mistakes and the screen was a mess. I think I will be able to finish this version with your help. I didn't know to set the fade in and out for each clip. Can I do a global function to affect all of them?

[@tasteofnebraska]

Remember, you can always hit the arrow in the top left corner in order to take back any mistake you may have made. You can also have fade effects between scenes.

[@Denverdano5280]

this video was very helpful. I was able to edit my video get it uploaded right after watching this. Note I haven't done video in about 8 years. thanks for the help.

[@tasteofnebraska]

Glad to help! Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@melaniestack8087]

Thanks for the great overview. You make it look easy. I am feeling a little less intimated and ready to give it a try.

[@tasteofnebraska]

Glad to help and thanks for watching!

[@abrowncat]

omgg thank u!! i have to edit a video for a project in school and it helped so much !!

[@tasteofnebraska]

Glad to help!

[@suzybennett3049]

how do you start a timlapse?

[@tasteofnebraska]

That may be in the way that it is recorded but I will see if I can find that feature.

[@vast3964]

How to make an overlay over greenscreen?

[@capecodbiker9902]

Great video. I’m having trouble loading a video onto you tube. It comes up on you tube but it’s blank no video if you click on the video It says it’s being processed but nothing happens like 20 hours later with a google search i it says to log out and Lon back in I did that. I clear my browser history I’m using mp4 from a go pro it’s a long video but it’s should tell me there a problem. It doesn’t. Any ideas I e been playing with it for a week now ready to smash my computer lol thanks for the how to video.

[@travisp11]

So you exported the video and it’s done. When you click on the file can you play it back on your computer?

[@travisp11]

Possibly try re exporting it and see if a newer finished version will upload and process. If the old one isn’t in your personal content playlist it isn’t making its way to KZbin correctly

[@capecodbiker9902]

@@travisp11 I didn’t try and play it back to be honest I’ll try. It took a while to export like 50 min. I’ll see if I can play it back thank you I’ll let you know. How I do thanks again your video help a lot

[@travisp11]

@@capecodbiker9902 find the finished video on your computer and see if you can watch it. If it doesnt play that means the finished file is corrupt and needs to be re exported .

[@thebricklayerschannel]

Thanks, I am in the process of uploading bricklaying videos, this vid really helped a lot. Simple and too the point and showed me actually how to add text, fade in and out, upload, save and all sorts, thanks again

[@tasteofnebraska]

I’m glad to help! I may make a part 2 soon that addresses many of the questions people have asked for this video.

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@apalebrick]

Thanks a lot, first using it I had no clue but now I watched the video I know how to use it now.

[@tasteofnebraska]

Glad to help! Be sure to check out my advanced features video for this software!

[@SLBikers]

My favorite app for editing! The videos you find in my channel are all edited using video pad!

[@harristorrices4873]

Brilliant tutorial presentation. Very clear. Good job. Thanks

[@tasteofnebraska]

Thanks!

[@theonlyguiltymaninshawshan7909]

Great video... I just purchased Video Pad Pro and this has been very helpful. Thank you!

[@tasteofnebraska]

Thanks for watching!

[@_quixote]

It wont let me click on video effects. Is it because im using the free version? Please help

[@travisp11]

You should have access to at least the basic features on the free version.

[@bombonica007y]

Halo,i have a problem.Sorry on my english.Do you know why when i put letters on video and after exporting video,on part where is letters video going crazy.I do everiting and still after exporting video,when letters show on screen video have ugly horizontal lines

[@tasteofnebraska]

I honestly don’t know. I have never had that happen. Make sure your computer has had all of its updates.

[@pugdaddy3061]

This is brilliant.. well-done man!! Cheers

[@tasteofnebraska]

Thanks for watching!

[@RobinLaneLowe]

This is a fabulous tutorial ❤ thank you so so much. I've had this program for about a year and you still had tips and tricks I didn't know about. Thanks again. I just subscribed ☺

[@tasteofnebraska]

Thanks for watching! I've done a part 2 now and may do a part 3!

[@RobinLaneLowe]

@@tasteofnebraska and I will watch that too...and a part 3 if you post. You are sooo easy to follow and I appreciate that. I'm old and technology is not my friend ha. If you ever need some cleaning motivation 😁 I've got it for you on my channel. Happy Sunday

[@tasteofnebraska]

@@RobinLaneLowe I will do that! Thanks!!

[@zeelowsguys]

Hey Travis, me and my colleague have pretty much completed our project using this programme. But there’s one issue, in the form of two grey vertical bars that show up in the audio file section and cause a “glitch” or short gap in the audio during playback. I really would dearly love to know how to get rid of them ..could you please help😞kind regards From New Zealand ❤

[@tasteofnebraska]

Possibly try a fade in with the audio at the start and end of the audio clip.

[@UltimateGoldenGirl]

Thank you for sharing this. I am trying to edit and put up on YT the last 40 plus years of my home videos. Right now I have to upload the whole video to YT and edit it from there which is challenging. I have not figured out how to do this through Video Pad. For some reason I get other videos that come through onto the one I am trying to upload and it doesn't save the edits. I will watch your video and thank you.

[@1videocafe27]

Excellent video,I may have missed it but what is the gray space between each clip.I haven seen that on other editors,, thanks,,

[@tasteofnebraska]

You click that box in order to choose the type of transition you get between each clip.

[@1videocafe27]

Thank you,,,!!

[@1videocafe27]

@@tasteofnebraska Thank you,,,

[@unotratanti6650]

Just an amazing explanation, i found it super useful, Thanks a LOT!!!

[@tasteofnebraska]

Glad to help!

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@tasteofnebraska]

Enjoy part 2! kzbin.info/www/bejne/a3uxh5qsoNlnrqc

[@zob3412]

how can I make overlay pictures move on the screen? Helllp plsss! :/

[@tasteofnebraska]

You should be able to click on that clip in the production line and apply a special effect to make it move.

[@besipp]

Hi Just wondering so far have trial version...Have question have about 5 second video but want to like loop the video and made it 3 hours long..what is best way to do this?? dont want to do copy and paste with 5 sec videos..or i can do copy and paste and made the video 5-10 min long and then loop but on this case im still not certain how to copy the whole track and then paste??!! thx

[@tasteofnebraska]

I will have to look and see if there is a loop feature that will go for a certain amount of time.

[@savageskrill2445]

Hi I have an important question I am making a reaction video and need to know how to screen record like you do in this video

[@travisp11]

I use screen cast O matic, it is super easy to use and I think it is free

[@savageskrill2445]

@@travisp11 thanks il have to try that. 😀

[@travisp11]

@@savageskrill2445 Cool! I think you can use the program for free with some limited features but I buy a yearly subscription to it.

[@savageskrill2445]

@@travisp11 Thanks this solves the problem I ran into.

[@Pianoandguitarplaywr]

is there anyway if i can upload a video i made past time, but the video quality was 360 is there a way i can make the resolution a bit beter?

[@tasteofnebraska]

When you export the video you get your choice of video quality. Go with a 1080P option

[@Pianoandguitarplaywr]

@@tasteofnebraska ok

[@jshan_sg]

Thank you so much. The best tutorial ever.👍👍👍

[@tasteofnebraska]

Thanks for watching!

[@landrysworkshop]

How can you speed up a certain clip or clips of a video and add music to it?

[@tasteofnebraska]

Check out my advanced features part 2 video. I think I covered what you are asking for. As for adding music that is easy. Just drop your music file on the source library on the left side of the editing window and add the music to the timeline for any soundtrack you want.

[@Jeff-nr3rs]

Hi, thanks for the tutorial :) Do you know the video maximum length that NCH VidepPad can to compose ?

[@tasteofnebraska]

I've read 3-4 hours but be prepared for some long processing or export times unless you have a powerful computer.

[@Jeff-nr3rs]

@@tasteofnebraska thank you

[@strikerbolt123]

hello i am in great need of help. everytime i use videopad to edit a video it creates a bunch of temp files that take over 50gb of storage! please someone help i dont know how to fix this

[@tasteofnebraska]

I think that this is done in case you accidentally force quit on the program or experience an error. Which folder are these going into? I set my working/temp file to save to the desktop instead of a docs folder and then once I export my video I delete the temp file if I am happy with the final product.

[@7777voyles]

When doing your titles. How do you make the video show up on previous screen. So you know you can drag your titles exactly over where you want them? Help!

[@tasteofnebraska]

You can drag the left and right side of the title box so that you can make the duration longer on screen. You can also grab the title box and move it so that the titles are positioned exactly where you need them.

[@PoloniaSD]

Is there option, like in Pinnacle 14, to work on few sound and video tracks on one screen?? Any other free software suggestion?

[@tasteofnebraska]

I don’t have any suggestions

[@dancing-partners]

Thank you this was very helpful I love the way you teached this I understand better.

[@tasteofnebraska]

Thanks for watching and I am glad to help!

[@chrisshowsyou1298]

i was trying to import my slow motioned video to videopad but after importing, the video runs in a regular speed. is videopad capable of importing a slowmotioned video?

[@tasteofnebraska]

I was thinking that if the video was in a so mo format the video editor would bring it in that way. You can add slo mo if you want to. Check out my part 2 episode on advanced features.

[@dmorales74]

How long of a video can you make?

[@tasteofnebraska]

The software company claims you can load at least 3 hours so in my opinion I would say you are limited to the size of your hard drive.

[@PoloniaSD]

Is there option to work on two or three audio lines on one screen. With video also ? I do a lot of changing volume or erasing. If Not, what different program you suggest.

[@tasteofnebraska]

You can load multiple audio tracks on each workflow/timeline

[@karlgawlik3109]

Hi do I need to resize jpg images? my image are around 4000px x 3000px.

[@idkVR88]

just uploaded a video with 2 clips for the first time thank you so much

[@tasteofnebraska]

Thanks for watching!

[@gwiszitstaxtime7293]

Thanks for helping! New to KZbin! Keep on rocking on!

[@tasteofnebraska]

Thanks for watching!

[@MelodyleeHayden1]

Thank you I found this very helpful ❤

[@tasteofnebraska]

Glad to help!

[@alwayspositive999]

Great video and clear explanation too .thanks

[@tasteofnebraska]

Thanks for watching!

[@markotrinpa]

can someone help me? how to make the sound speed diff then the video?

[@PompeyMatt17]

I copied the source files from my old XP machine to my new W10 machine and it works so far. NCH seem to say that'll work unless you try and run both.....I've created new videos on my W10 machine but admittedly not rendered them yet to see if there's a watermark on the final video..

[@Brianna18mm2]

Definitely ready to get started now!!! Thanks for sharing

[@tasteofnebraska]

Thanks for watching!

[@tasteofnebraska]

Enjoy part 2 kzbin.info/www/bejne/a3uxh5qsoNlnrqc