The best affordable joinery saw for hand-tool woodwork.

[@chris_thornborrow]

God I love your attitude Rex. Spear and Jackson makeover rather than Veritas. Man after my own heart.

[@erichenao6537]

that side eye at the end on to the spear and jackson…classical. Hysterical!

[@RexKrueger]

Thanks! We worked on that.

[@Bdlawless]

LOL agreed man! Great video Rex!

[@solypsomancer9540]

Rex: I have been calling you my KZbin woodworking guru for a bit. One piece of advice you gave shines over any other. "If you have hobby skills a wood shop will take you gladly over someone walking down the street," I paraphrase. I have an interview for a frame carpentry job on Friday and a woodworking shop coming up soon. #thankyou #headingtopatreonrightnow

[@pigzoid2206]

As a current owner of the spear and Jackson tenon saw I am very glad I watched until the end and I am certainly excited to follow along

[@j.d.anderson6710]

I recently discovered your channel and I've been binge watching the last few days. All can say is: Wow, thank you! Finally a channel that is truly for the poor man! Your common sense, no bull s#*@ advice and way of doing things is so refreshing. Don't get me wrong, I'm huge fan of Stumpy Nubs, The Samurai Carpenter, & those guys. Paul Sellers is my hero, I want to just like him when I grow up. But don't have and probably never will have the money to buy all those really, really, nice tools... Because they are really, really expensive. But I can relate to your videos, and watching you, and seeing you do what you do, really inspires me. Thank you for showing that you don't have to be very wealthy to have a decent wood working shop.

[@RexKrueger]

It's really my pleasure! Thanks for your kind words!

[@matthewgartner5339]

A quick tip for cleaning different shipping oils off of metal. Use soap and hot water. I know everyones hesitation with RUST but if you use boiling hot water to rinse, it drys quick. Then rub some machine oil on it and rust won't be an issue.

[@AlanTherby]

I just tried searching for best hand saw for beginner woodworker -- I haven't even started on my first project yet, but I need a decent handsaw that doesn't cost an arm and a leg. 100 (even slightly under at 70-90) is a bit out of my price range. I've been watching some videos stating my first project should be a work bench, however, I got a circular saw for Christmas and I don't even know how to rip boards without a bench, so I figured maybe I should make a pair of sawhorses, and the one video I liked (the design I liked) requires a hand saw to cut angles. So I'm still looking. In any case decent video even if I can't really afford either of those saws, you earned a subscription.

[@darkJohnSmith]

I recently purchased a very nice, very old, large saw-sharpening vice. Made of iron and very heavy-duty. $30, because few people use them these days. Let me tell you, sharpening your own saws is wonderful. I highly recommend it. Not difficult to learn. Doesn't take long, and they don't need sharpening often. Don't be afraid to learn! Once you do it, you'll love it. I was intimidated at first, but it's much easier than I thought.

[@67Bahloo]

I love your humour in getting the information across

[@timothylarson3583]

I have the S&J model above this, that has the removable handle and teeth that can be sharpened. It was really rough straight from S&J. I flattened the teeth on an avail. Reset the curf and properly sharpened it. I now have a saw I like. Not sure if my time was more than the difference of getting a better saw up front... but I love the challenge and that's worth something.

[@frankpoulin7662]

"It looks like Batman took up woodworking" SOLD!

[@Youzack1]

Same😂

[@richardmalone1986]

Hi Rex: I am one of those people that could not drill a straight hole in a million years; but do love tinkering. I have found a simple jig to drill straight holes in long parts with my drill press. A piece of 4 inch long, 2x4 with two elevating feet with studs from McMaster. The elevating feet are mounted into the 2x4 with tee nuts. Now I can level the item being drilled. Finally I can drill straight holes in longer items.

[@MatthewPowell9]

I have the Veritas dovetail saw. Such a pleasure to use!

[@bigkiv47]

Yep I agree. I was sceptical as it seems so light when I first handled it, so I procrastinated for a few months looked at other saws and shite even contemplated a Bad Axe saw at $550 AUssie dollars... phew. Them went to a wood work store, CARBETEC in AUssie, and tried out the Veritas dovetail in the 14 tpi and their crosscut in 16 tpi in some hardwood and pine and it was pretty dam good... got them home and they are a brilliant saw and half the price of other comparable saws so extra money for other wood working stuff.... winner winner chicken dinner lol

[@jwdougherty3798]

One thing that I picked up about back saws is a trick to test the cut "balance." You draw a number of lines vertically down the face of a scrap board from an end. Then cut down one line starting at one side. Don't attempt to follow the line. Hold the saw properly and let the weight guide the cut. Watch whether the cut wants to wander off to one side. If it does, lay the saw flat on a good surface with the side of the saw toward which the cut wanders upward. Then lay fine grained, hard sharpening stone on the face of the saw and covering part of the edge and run it gently from the heel toward the toe of the blade. No need to press. Any over-set tooth will be abraded off. Repeat until the kerf is straight. You can also narrow the kerf and smooth out cut quality this way. Just be sure the narrowing is symmetrical. Peter Sellers may have a piece about this.

[@MrMNRichardWright]

I took the hint a long time ago, I saved up and got the Veritas, haven’t looked back. Can’t wait to see how you do with that side glance saw.

[@bmillare]

this was hilarious to watch. Great humor and editing.

[@nathanvandendungen4450]

Bought the GreatNeck 14” miter saw off Amazon for $15 about a week ago and have been very impressed with it so far. Easy to saw right from the package, hardwood handle and can be resharpened. Still like my Japanese saws for precision but the cheap western saws seem to work better in pine for my work.

[@josephhaddakin7095]

I thought GreatNecks had hardened teeth?

[@nathanvandendungen4450]

Joseph Haddakin not the one with a blonde wood handle on Amazon, but this is the first time I have bought from this brand.

[@elanman608]

Spear and Jackson are a British company. In the UK where untill recently there was no such thing as a "Back Saw" all saws with a spine were called "Tennon Saws". Which saw you call a dovetail saw and which a carcase saw etc is personal choice. In the shop you would ask for a tennon saw of the apropriate length and tooth count. Say a 14" 12tpi tennon saw as a carcase saw, 12" 14 tpi tennon saw for Joinery and 10" 16 or 20 tpi as a dovetail or trim saw. Since the most hobbyists now learn from KZbin many UK manufacturers now name saws by function as that is what customers are asking for. I assume the name Tennon saw came about because it describes the function of a back saw i.e. it can make both rip cuts and fine cross cuts with a thin supported blade.

[@johnnorris1546]

Yeah that is correct. I was apprentice in a joinery shop for 2 years before I quit. (Nice hobby, lousy job) A joiner had basically 2 hand saws. A panel saw and a tenon saw. A dovetail was somthing that my great grandfather did. I had never even seen a dovetail get cut so I had until recently never even heard of a dovetailsaw. When a joined bought a saw he would buy that when he was an apprentice. It would be the cheapest piece of crap that you could find. Between finding it's way at the bottom of the canal at retirement and it's first day in the shop the teeth would be reset and sharpened thousands of times.

[@PeteLewisWoodwork]

Rex. This evening, I used my Spear & Jackson Tenon Saw - identical to yours - for the first time (in the year or so that I have owned it). I am making a Blackthorn walking stick for a friend of mine who has had hip problems all his life - it's his birthday soon (late 60's). I cut it from the wild and have seasoned it for 8 months in my home. Anyway.... I used trad saws like this way back when and I don't have much problem with the handle, though it could be better. I have downloaded your pattern to improve it and will probably do so at some point, just to see if I find an improvement. I also didn't find much to be worried about in the cut that it left in the solid Blackthorn; my problem was that it skipped and jumped a lot during use. I realise that Blackthorn is a very hard wood but it was held close in the vice. The portion I cut was a little over 1.75 inches thick, which isn't much and should never cause such jittering, so I agree that those saws need fettling before use, though it is sharp but the set seems all wrong. Luckily, I have the files and a tooth-setting tool at hand. I paid a very modest price for it on Amazon and I know how to deal with the problem, so I would urge anyone starting out to get one - and if they can't fettle it themselves now, get someone else to do it until they acquire the stuff needed and learn how to do it - I'm sure they will be satisfied in the long run. One tip about saw handles...the angle of the handle should aim your energy towards the middle of the blade. Get that angle correct and you are on the right track (may need some forward adjustment to suit your own preference). The same goes with planes - the handle should aim your effort directly towards the cutting iron edge (slightly leading towards the toe is ok but never towards the heel). That is the rule of thumb to go by.

[@williamweatherall8333]

This is your best video yet. I’m sorry if it was easier than your other videos, it was just really entertaining.

[@RexKrueger]

Don't be sorry; it was pretty hard to make!

[@scottm9605]

Traditionally saws were the most expensive item in a joiner's tool kit. Use a good one and you'll see why. The big veritas tenon saw is more than worth the money. If you don't have the money you have to invest the time but I really encourage people to invest the money, a good saw is sooooo good.

[@charlesfield9286]

Vaughan BS250D Double Edged Bear Saw Handsaw $34. I’m a serious hand tool woodworker, without any financial constrains. I have a half dozen really nice hand saws. The Bear Saw is the only one I use.

[@jimcarter4929]

The Spear and Jackson surprised me how well it works. Reason for getting was I sent a twelve inch vintage Disston to Matt Ciani to make really dialed in, like the saw a lot and wanted a perfect small crosscut in till, but eyesight won't allow me to do cc filing anymore. After seeing another you tuber recommend this saw though it might fill in for awhile for crosscutting.First thing was to strip lacquer off blade and handle with acetone, then reshape handle, filed teeth, at first not impressed but kept at it. Settled in with about .039 total kerf and a pretty aggressive rake. It works very well now and crosscut or rips well.

[@BillCoale]

Fast forward 1 year to Nov 2021... The Veritas and Crown (and Flynn) are now priced the same at $106. What the--!?! Spear & Jackson looking better every day (still $40). Thanks for saving the day again!

[@jimcarter4929]

The S and J did go up in the last year.

[@EngineerMikeF]

Rex- Reason you ruined the fine teeth on the dozuki is you are applying pressure that is beyond the fine tooth capacity. Per Katz-Moses, you use only the weight of the Suizan dozuki saw itself for downward pressure because you are trying to produce a smooth cut to just inside the waste of joinery cuts. I add just a teeny amount more pressure on mine, and it seems to hold up. Saying isn't super fast. But I (you, they, we) don't reach for hand tools for speed.

[@domintetarus7840]

Also he didn't test the new saws on that oak board;

[@crichtonbruce4329]

This might be a bit long.. I have been a woodworker of limited means for over 40 yr.s and I believe your channel does a great service to those who fear to fear to move forward in the craft because they can't afford the perfect $200.00 + low angle plane or whatever. There is great joy and a massive amount of skill development in taking an old or sub-standard tool and re-conditioning it to make it a good or even great tool. My own tool kit is fairly small and most of them I've had for decades. But: they are sharp and well tuned and do what I want. If they don't, the first thing I question is "Do they need re-tuning?" So: Thank you Rex! Now for my own advice... Quality measuring tools are an absolute must most work, and I have some great ones having also done machine tool metal working. However, if you are careful with them, quality DRAFTSMAN'S tools are wonderful things in the shop! I had mine initially just for drafting, but one day needed a big square for lay out work and grabbed my "T" square... Since then my drafting tools are an integral part of my woodworking layout tools. They are (mostly) inexpensive, and very precise. They are relatively fragile though, so be careful of them. As another example: look for a good, used, professional grade compass set. You will be amazed! Now that so many have switched to CADD the old, manual drafting stuff is often just thrown away.

[@KonradZielinski]

I have the Spear & Jackson saw and I agree that it does not cut well. So looking forward to see how you fix it.

[@silmarils94]

I've used the Spear and Jackson for about a year and you know what....I'm Happy! I didn't feel I had to resharpen it, it cut very well on a rip ..and go for the hand saws from SP both are beast for...crosscutting.The handles are awful but feel nice in the hand.

[@kevinmrandolph]

Eagerly awaiting the Spear and Jackson makeover

[@johnperez3212]

Dude thanks for the videos, i finally made my first work table, and it was the english joiners from your video, and its brutally stable and tough, thanks

[@RexKrueger]

My pleasure!

[@lastniceguy1979]

I cannot stand to see a good creator with good content under a 1000 likes. Glad I could help you over that 1k mark, from 999. Haha.

[@RexKrueger]

Wow, thank you!

[@thewoodweldingfabricator9300]

I've used a hacksaw for quite a lot of precision work, and I got to be honest, it works really good in a pinch.

[@Vincent-S]

Another option is making a little frame saw. They're a little light, but fairly easy to make. I made mine out of cherry, a piece of twine and, as a stopgap until I get around to getting a bandsaw blade, a hacksaw blade with a pair of cut nails (another stopgap) to pin the blade in. Juuuust try to not get too into making it look nice, I accidentally fudged the ergonomics a bit on the handles on mine.

[@brandonwilson8115]

I'm with you in hoping that we haven't abandoned the frame saw angle.They talked about it in the comments a few videos ago.

[@soberlivingwithbrianfrankl8254]

Love my veritas carcass saw! I use it as a dovetail saw

[@RexKrueger]

Kind of hard to see why you'd bother with the dovetail saw if you have the carcass saw.

[@soberlivingwithbrianfrankl8254]

@@RexKrueger I agree, I love how the carcass saw works....

[@jccapwell]

I appreciate you work and the money you spent on this review. When you talk about rebuilding a production piece to make it “better” it becomes a time investment and our time is worth something. So in doing a rebuild are we really saving money? If that is the tool we have in the first place then I understand. However, buying the right tool first and once is far better use of my limited resources. Thank you for your videos.

[@mvanalst2003]

I simply do not understand how ANYONE could give this video (or any of Rex’s videos) a thumbs down. There’s good stuff here folks!

[@porlsmith6395]

That'll be Spear & Jackson!

[@carlson.douglas.w]

I find his presentation style to be off-putting. I just don't care for it. Now, I will also say that he is energetic and enthusiastic. His content is well intentioned and well delivered. He's trying to share his WW knowledge with others and i greatly respect any person who does that. But his delivery style is not something I'm crazy about.

[@ikust007]

Dear King: the next project ... Frame saw ! Cheers !

[@RexKrueger]

I do not disagree. And I'm the king.

[@jezaitkens6676]

@@RexKrueger I've saved up some oak from an old gate-leg table to start making my own Paul Sellers frame saw, but your input would be much appreciated Rex, you always put a new spin on Paul's approach. Admit it, if you're the king, he's the emperor!

[@chadshort4750]

Great video, I’ve been thinking on both those saws for a bit, I now feel safe pulling the trigger on one.

[@RexKrueger]

Right on

[@clintstinkeye5607]

This got me pondering... I'm a former shipwright and I've known scores of shipwrights. I've never seen this saw take up space in any of the master woodworker's shops. Japanese style saws are the dominant theme for that spot in woodworking from my experience. I'm not saying anybody is right and someone is wrong, it's just an observation. Kinda interesting for me to reflect on.

[@matthiasmangoldmangold8449]

If yo put a little work into them, spear & Jackson saws are pretty good. A few years ago i bought a skew Back saw from them sharpened it for a rip cut and modified the handle. My favoutite saw for long rip cuts scince then.

[@motobenbh4722]

Really enjoyed your presentation on this one. But then, I always do.

[@theeddorian]

I've found that many commercially sharpened saws are set for too wide a kerf. Also, if you set up test rip cuts making parallel cuts in the end of a board, if the saw wanders consistently to one side, you can correct that wander with a sharpening stone. Once you get straight cuts, you can adjust the width of the kerf and clean up the cut the same way. I won't go into detail but it works really well.

[@weldabar]

I really liked Rex's presentation here. If you plan on buying and modifying the Spear and Jackson, the saw Rex shows is the 9550B. The 5412K is the same size but the blade is removable already. For $7 price difference it is probably more economical to buy that one rather than buying separate bolts & nuts. We'll have to see if Rex can find a cheaper deal. I look forward to the next video.

[@seangreenwell78]

It's like you have an in with the NSA. I literally just Googled "Best entry level handsaws" and the notification for this new video popped up. Thanks for helping me with my purchase!

[@RexKrueger]

Boom!

[@petergray6055]

We use a mix of the spear and Jackson’s and the crowns at school. I always use the crowns for my demos. We have a lot of issues with the s&Jc saws. I tend to find the handle is too high on the blade, the crowns we have, like the veritable are lower so your effort is more in the direction you are sawing. With the s&Jc it’s just...weird, they jam and wobble I guess, because the force is just not in line with the blade but it seems more than that. I’m looking forward to seeing how you fettle it into something more useable (although my technician might not be if she has to sort wh if them). The other thing we struggle with with both these saws is hardware. The s&Jc has rivets that work loose and are smaller than most of our spare saw screws so we end up drilling the blades, not easy as the steel is good quality. With the crown ones the hardware uses saw screws but they seem to work loose even with thread lock. Of course the kids don’t tell us until they’ve lost the bits on the floor, but then that’s kids.

[@RexKrueger]

Well, I promise to get rid of those rivets for ever!

[@hartleymartin]

@@RexKrueger - Looking forward to that. I bought an S&J 22" Panel Saw. The plate works great, but the handle is just not nice. Useable, but not a nice experience.

[@unitwoodworking5403]

👍👍👍Thanks for useful tips and detailed information.

[@joedibble4199]

Wish this video was out before Christmas when I got my S&J. Had decent reviews on Amazon. I’m glad to know it’s not just me that’s not finding it acceptable.

[@jeremiahclapp5287]

This series is amazing

[@Cadwaladr]

I have a Stanley hardpoint saw that had a handle very similar to the Spear & Jackson, pretty uncomfortable. I took it to the router table and went around it with a 1/2" roundover bit and then it was perfect. I built a whole cabin with it all by myself.

[@s.a.n.k.i]

Rex, you're just too much fun! Keep it up

[@nicholasrusson8978]

I spotted the Veritas in the line-up immediately and wondered how it got there and how you were going to 'splain it. You did a good job ... because it really is an excellent saw (I bought one when I was much more flush with cash), but knowing that it is possible to make a cheaper saw work well is still encouraging. I'm looking foward to the follow-up video.

[@akavlie]

I love the tool comparison videos. I'd like to see a shootout of new affordable panel & hand saws, such as the Spear & Jackson saw that Paul Sellers recommends. Most of the other budget saws cost $70 and up however.

[@georgegonzalez-rivas3787]

You're doing a good job, Rex. Keep it up.

[@paeppchen3970]

I got the spear & Jackson, and I learned with her. If I could make it Berner I would love it. Well done, lover your videos

[@NickLuker]

Ah the joys of retasking handsaws. I found a nice 14" post WWII Disston backsaw that has the same problems as the S&J. I decided to refile it to a hybrid cut (because it is 13 TPI) and make a new closed Disston pattern handle from maple. I find that Issac Smith's templates on Blackburn Tools are excellent for getting the correct size for you hand. Best of all, he offers them freely for private use. Looking forward to see how you make over the S&J.

[@TheHandToolery]

I think Paul Sellers recommends S&J for the same reason you do. Good starting point for cheap, and you can improve the handle, etc. Good stuff, man!

[@KrampusTech]

I'm in on the new letter. Wish I could afford a cheap plan but being out of work has not made it easy. Maybe one day I can say that I helped fund someone teach and explain, like Paul Sellers ( yes, I know, big compliment there). Keep up the amazing work.

[@jephreysouth6793]

Thanks Rex for yet another great video. I am a total novice but am trying to advance from everything being made from big box 2x4's, plywood and screws to something closer to real carpentry. I have no shame in admitting that I make all of my big cuts using an electric compound miter saw or table saw, both with heavenly WD Quinn blades. But I have no saw that is suited for use in real carpentry. You mentioned that if you didn't have anything else, to get the Veritas and never look back. I looked at it and it has a near twin for the same $90 price. The one you showed us is optimized for cutting with the grain (rip) and the other one is optimized for gutting against the grain (crosscut). The only differences are the rip saw is 12 TPI with a 10° rake angle and the crosscut is 14 TPI with a 15° rake angle plus teeth having alternating 15° bevels to sever the fibers. If you could only chose one (the one to rule them all!) for roughly the next year, which one would it be or something completely different and why? I am behind on far too many projects to put the time and effort into improving a cheaper saw with doubtful results at my skill level. The links to the saws are here: www.woodcraft.com/products/veritas-rip-carcass-saw-12-tpi www.woodcraft.com/products/veritas-crosscut-carcass-saw-14-tpi Thanks for the videos and hopefully even answering this question. Jeph

[@jephreysouth6793]

I've made my decision. Although almost every piece of my wood is crap and thus I am effectively making crosscuts even following the grain, I want the cleaner cut from the teeth all being aligned on the rip saw. Now if the place that sells it for $70 would just get it back in stock!

[@talesfromthebutchside5613]

Great video! I've toyed with the idea of buying a cheapish saw like a Spear&Jackson and making my own tote. I'm looking forward to what you come up with!

[@chaoslu]

cant wait for the reworking of the saw.

[@craigmouldey2339]

I recently got a Veritas dovetail saw. Yes, it is a good saw but I find it to be not heavy enough. I also recently picked up a tenon saw and decided to try the PAX instead of the Veritas. Beautiful saw. It is packing good weight and cuts well. Not hard to start your cut.

[@gnarthdarkanen7464]

About the end of last summer, I ended up in a trade for a "mass" of saws, including possibly the longest back (tenon) saw I can remember ( maybe 24+ inches?) It's only been lightly used, so good teeth and cut and near infinitely resharpen-able. There was a "normal" sized one with a miter box, and a couple solid set-ups for angles, with the fancy table top frames, fence, clamps, gauge in degrees... Just waiting for decent weather as I have to work outdoors... AND I'll be figuring out which to keep or trade out. Got about four Japanese saws but passed one on for a struggling noob' who instantly fell in love with it... Looking foraward to your handle tweaking / advice. These are reasonable (cost-wise) for that kind of practice (hot-rodding) for max benefit. ;o)

[@zakman36]

Well I appreciate you back!

[@gregmislick1117]

Although the price makes it out of scope for this range, my son bought me a Floorip Toolworks Dovetail Saw for x-mas - based on what you said here, think Veritas on Steroids - and it's entirely hand made as well ... brass back, thin blade, beautifully sharpened and set and the fit of the handle, as you said, you'll never want to put it down. Of course, I'm afraid to damage it by using it lol. Can't wait to see what your modified saw is like. Now... if only I had a Jointer's Bench .... with a vise ..... hmmmmmmmm

[@zafardurrani9544]

Thank you for this great information and providing beautiful knowledge also Thank you for this wonderful and inspiring video

[@DeDraconis]

I am very eager to see how you fix that cheap saw up. I just got a rusty old Miller Fall's no9 off of Craigslist that I'm going to attempt to fix. I have never restored a tool before, so I'll be rewatching your plane set up videos A Lot. xD

[@TheSMEAC]

Good solid video Rex 👍

[@RexKrueger]

Glad you enjoyed it!

[@Youzack1]

Rex, you’ve got an awesome channel. Thanks for all the great info you’ve put out there.

[@RexKrueger]

My pleasure!

[@skiphayes1795]

I have a couple of other options in the lower cost category. I have a Lynx and a Big Foot. One crosscut and one rip. They both work great for me.

[@RexKrueger]

The Lynx is the same as the crown in this video. I got both!

[@bamabry]

Excellent and thorough as always! I haven't gotten into fine joinery like that yet, but maybe this is the incentive I need!

[@RexKrueger]

It's just little steps. You can get there!

[@sleepingstate1978]

I have this saw. I am looking forward to your mods

[@travistibbs5402]

I literally just bought that same Spear and Jackson saw last week hoping to do exactly what you’re going to do and now you tease me with a 2 week wait...

[@RexKrueger]

Sorry! It takes a lot of time to make these videos.

[@travistibbs5402]

Rex Krueger I completely understand, just eager for the next one!

[@theidlehandsworkshop3884]

Love it, you're putting all these out in an order that goes right along with stuff that I'm doing which require tools I don't have and you're explaining it all... MANY MANY Thanks !!!! Keep it up Rex !!!

[@RexKrueger]

Glad to help!!!

[@MCsCreations]

Fantastic video, Rex! Thanks a lot! 😃 Stay safe there! 🖖😊

[@javanbybee4822]

Could you do a video on forging a draw knife?

[@RexKrueger]

I could, but I don't think anyone would watch it. My smithing videos never fly.

[@javanbybee4822]

@@RexKrueger I mean, I would watch it.

[@danlopretto7222]

Rex, besides rubbing the goop off the crown saw did you do anything to them right out of the package? Example: sharpen them; reset the teeth; oil the plate; straighten the backs. The S&J is probably just a punched plate from the factory so the set on the teeth would be uneven.

[@RexKrueger]

No, and I should have covered this. Everything in this video is straight out of the box. I oil all my saws throughout the day.

[@NewellCo]

Do you truly put Veritas joinery saws under the tab of “High Prices”? I understand when comparing them against the likes of Pax, or whatever back saws happen to be kicking around the back of a bottom shelf in a big box store. But when comparing it to what are widely considered to be Top of the Line, Premium Back Saws such as Bad Axe, Lie Nielsen (I guess lol), Rob Cosman Saws, BearKat, Florip, Jared Greene saws, etc. Have you ever cut with any of these to compare THEM, and how THEY stack up? I think you would like bad axe, as they are basically Henry Diston of the Modern era. Old school saw building with better materials

[@Project_Bronze_114]

Funny thing about this video, I actually bought that Spear and Jackson saw before watching this video, and got it delivered today. I’m curious to see what mods you plan on for that saw!

[@thefunbot]

looking forward to the video on the saw remaking!

[@FelixGuitarCovers316]

Thank you Rex! I already have the Spear & Jackson saw you showed in the video, it's 25€ (27$) new on Amazon Germany. Now I can't wait to see what I need to do to make it work better! Cutting my first tenons and dovetails with that one (I just can't afford another saw dedicated for dovetails right now) seemed way harder than it should have been, even for a beginner like me. I still like the quality of the material and I'm sure you'll make the most out of this thing!

[@RexKrueger]

It's not you; it's the saw.

[@nasarazam]

I wonder where does Veritas Gents saw fits into the picture?

[@1deerndingo]

I am soooo looking forward to the make over of the Spear and Jackson. I keep coming back to the page to see if you have released that one yet.

[@RexKrueger]

Just finished shooting it yesterday. That video will not disappoint, I promise!

[@1deerndingo]

@@RexKrueger I'm thinking new handle, new pins, polished blade. I know I need a life but I'm excited. BTW, if you want to turbo the sharpen, I put a back bevel on the rip cut tips with a 1200 diamond paddle. It acts just like the microbevel on a chisel - toughens the blade and keeps it sharper longer. You can thank Paul Sellers for that one.

[@pavelow235]

You Sold Out all of the spear and Jackson saws on Amazon. Good job 👍

[@RexKrueger]

I hope they get more in!

[@pnwRC.]

I'll anxiously be awaiting the tweaks you make to this saw to improve this budget saw, to be a better functioning tool!

[@sbvera13]

Ever since I watched Paul Sellers saw sharpening videos I've become such a saw snob, lol. Anyway, he likes to tap down the teeth between two hammers to reduce the amount of set and make a thinner kerf. I've had good results from doing the same thing. I bet that S+J saw will tune right up when it's sharpened right.

[@RexKrueger]

Right on

[@leehaelters6182]

You are so right. A plate is a plate. Sharpen it, reduce and level the set, and anything will cut beautifully and quantum levels better than factory. After that it’s about how long between resharpenings, and of course those odious modern handles.

[@johnhemby8631]

Know what I'm asking for for Father's day

[@RexKrueger]

@@DavesRabbitHole Beer AND a saw!

[@glen1arthur]

beer, saw and a steak.

[@smfvmd]

What you call back saws in the U.S. are always called tenon saws in the U.K. Spear and Jackson should stick to making gardening tools, and I say that as a Sheffielder.

[@hartleymartin]

To be fair, their 22" "Traditional Skewback" (a 10tpi panel saw) is perfectly useable, but suffers from the same poorly-shaped handle. You can cut with it, but it isn't comfortable. You basically need to reshape the handle and put in New handle nuts and it is lovely. You can even resharpened those to rip-cut and they work just as well as any boutique saw. I just with that they made a 14" Tenon Saw. They have 10" and 12" sizes, but I just sometimes miss having one with a 14" plate.

[@oliverdelica2289]

Ooh really? I've always thought that S&J is to small for a tenon cutting saw

[@Kozilak]

Rex, I’m considering making my own backsaw with some hardware from blackburn tools, you should do the same. It would be a great fit for your channel and a lot of fun I think!

[@EweTubio]

Love this video. The humor etc. Q: please. Different between Tenon and Backsaw?

[@naitodetsu]

looking forward to see what you do with the S&J. I have the 12" but rarely use it.

[@derangedoven7928]

The end made me laugh so hard 😂😂😂

[@BakerVS]

What are your thoughts on steel vs brass back?

[@MatthewBuntyn]

Are you going to actually make a new handle, or just reshape the one that's on it?

[@RexKrueger]

You're going to have to watch!

[@spiffmark]

Hey Rex! Loving the video. Just wanted to throw out there that my Dozuki has survived Wenge with little issue. That might be a manufacturing issue.

[@RexKrueger]

Or I suck at Japanese tools. That could be it, too.

[@2dividedby3equals666]

@@RexKrueger This is another reason why I really respect you. You're more than willing to accept that maybe is not the tool, but the operator that could be to blame. Don't take me wrong, I'm not saying that you're bad with Japanese tools, but it's much harder to blame ourselves and not the tool. As always, I really apprecciate all of the work and effort you put into the videos, thanks for sharing and take care!!

[@richardc6932]

I’m with Batman. The Veritas line of saws are top notch and made in Canada.🇨🇦 I like the looks of the old designs but not enough to buy new. The carcass and tenon saws at Lee Valley are $115 and $179. respectively here in Canada. If you want both rip and crosscut in both the price goes up to $199 and $309. for both ( rip and crosscut). That still a bargain when you consider the unit price for a single Lie Neilson OR a Rob Cosman back saw. Whatever fits your taste and pocket book. All three are well made but the bargain is Lee Valley. JMHO. 🇨🇦👍👨‍🦳

[@joseislanio8910]

The good thing about bad handles is that you can make a new one

[@brettshegogue]

Maybe a silly question, but if I have a ryoba, do I need one of these types of saws?

[@maryhastings635]

How many tpi on the Veritas 12 or 14

[@claytoncolgan2881]

Rex, Thank you for the great insight on a few of these tools. Dang, that Veritas is sexy! I actually picked up a quarantine special: an old Nicholson backsaw and it has a similar build to the crown. Can't wait to dress it up and get it going on some tenons! Always enjoy your content. -Clayton

[@josephhaddakin7095]

I've been hemmin' & hawin' between the Flynn Lynx & Veritas. Veritas just looks so frikn' space age strange though. Edit; after watching, I guess I go space age. Video was perfect timing for me.