THE BEST BRAKE PADS (STREET) G-LOC GS-1| I NEGLECTED THE CHANNEL | 2015-2021 Subaru WRX STI

[@michaeltaeza3662]

I've been running the same set for a over a year now. Does not squeak and has little to no dust. I'll be ordering more and more when I have to. I paired mine with DBA 5000 T3 rotors.

[@YoshimiPinkRobot]

Did you install them as they came? Or did you add shims?

[@titansfan0828]

@@AbsolvedinHimSame with mine. 21’ STI and these G Loc pads squeal HORRIBLY. Had them for about 8 months now and it seems to keep getting worse over time. Makes me miss the oem Brembo’s

[@marvincentmendoza8320]

This is THE BEST brake pad video I have EVER seen!

[@Tofu_Slayer]

Been going to the track with my Sti, those yellow brembos in the front turn piss yellow due to extreme heat.

[@christianarredondo3500]

You know you poor when you can’t say You ONLY got $5,000 to spent on car parts 😂😂😭 where you work at so I can apply 🙄😂

[@akaju1c3]

I wanna know the same thing....I'm in the wrong field man lol

[@ryeguy88]

Those Kranzle pressure washers are money but are killer.

[@MRM5J]

You mentioned 80 grit sand paper on the rotors but I didn't see you do that. Did you prep the rotors and if not any issues?

[@edwinnieves7023]

I just installed these up front. Considering swapping out the rear ones too but the stock ones still have plenty of meat.

[@CarsWithJR]

Yeah, no need to change out the rear if they are still good.

[@reynerperez5510]

Dude your always giving great advice! Guna try those pads out!!

[@moonman_8935]

I've got a 2019 STI & hate the oem rotors & pads. I am going with the same G-LOC-GS-1 pads. But for the rotors should I go with the KNS Blanks or the Stoptech Cross drilled rotors?

[@ZeNkIxFc]

Did you notice grooving in your front rotors? Or did resurface your rotors or just put on new pads. Need to replace my 18 sti pads and or rotors just looking for advice. Thanks! Great video. 👍🏼

[@Xzami09]

Send me the old pressure washer. I could probably fix it 🙈😂

[@mejiaric5]

Do a video on the head unit 😉

[@allena5702]

Never knew they had a mouse mover!! Definitely picking one of those up!! Question - your Prosport gauges - can you tell me which fuses you have the orange and white wires going to (if you have them wired to change colours when your headlights are on/off)?

[@BradlehDadleh]

@MyWRXChannel, you've been using the Perrin cold air intake right? Have you been pleased with it? Have you been concerned or worried about hydrolocking the engine? I can't decide what intake to get haha.

[@CarsWithJR]

I don't drive through deep puddles of water so no worries. I live in the Seattle area where it rains all the time and no issues. I drive my car a lot. 20k miles in a little over a year in rain city.

[@pw85___]

Damn your wheels have a tight fit WITH spacers.... Holy sweet Jesus that ETS kit is money (and to be brutally honest I wish Cobb made rotated kits. If they did they'd fully monopolize the Subaru aftermarket I'm sure of it) but there are stock location options that will get you the same power levels from FP as well. Clearly I'm getting older (35) but your garage setup has me slightly jelly. And I'm home shopping too. Last bit, that pressure washer..... Just go gas powered. I know, I know, dad/husband/bills life etc etc. A gas powered unit will not only last longer, the wash results that you can achieve are second to none 👌🏾.

[@austinmatthews255]

My Subaru Pressure Washer has lasted 7 years and I haven’t done any maintenance to it (probably should ) haha

[@pw85___]

@@austinmatthews255 I definitely need to change the oil on my Ryobi washer. Maybe check the spark plug too.

[@kyleyork4849]

How the GS 1 pads working out for you? Do you like them after the bedding in? I have a golf r I’m looking to replace the stock pads with the GS1s. How’s the dust compared to stock ? Thanks !

[@chandlercarlson2412]

Might have to snag some of these pads!

[@aaronseep4259]

Did u get them?

[@zeno15sti33]

those 9ah batts are too heavy for tools that move around alot wears out the connector, best to use them on the lights and stuff that doesn't move.

[@YoshimiPinkRobot]

Did you use any shims? Or just remove the stock pads all together and run these as they came without a backplate?

[@420MRBlueberry]

Yo JR was wondering if you have any automotive background cause i see you working on cars like a mechanic

[@ChadCelestres]

That tool rack looks great!!!! I'm gonna miss coming over. Maybe I should get these, they make this to fit stock WRX calipers?

[@paulmarsdensr8199]

Nice installation. Stay safe

[@joeplescia2145]

So how’s the brake dust. I desperately need to get rid of it on mine

[@louisGauto]

Yeah surprising the R12's I have don't produce much if any brake dust which is wild

[@bog1e]

You should add a "to be honest with you" counter. JKJK I've been looking for some decent oem replacement pads, good stuff.

[@Mitch_Sti]

Seems like those pads are very thin or is it me ?

[@ideagubabylove]

Is it ok if you don’t change the rotor?

[@CHASEtheDRIVE.]

What wheels are those

[@marvincentmendoza8320]

How are you running spacers with that wheel setup

[@ideagubabylove]

Did you resurface your rotor?

[@michaelblanco1549]

I havent had a chance to watch the video incase you didn't answer any ideas on what route you want to go for new rotors or are you gonna keep stock rotors

[@aaronseep4259]

Hey where did you buy those lug nuts? Thank you.

[@jayrico7514]

Where did you get that jack??

[@Spider_subi]

subi said my brakes were at .6 i pulled off tires at homes and I a full pad of cermic.. They BS me or what i only 10k on the car and im not the red light green light driver im a coaster...

[@CarStory]

I can't stand the amount of brake dust I get with the stock STI brake pads. Even the rear wheels get dirty fast. I might have to change rotors and pads all around.

[@rjv9352]

What wheels are those???

[@christianmariano3278]

are you using longer arp studs?

[@CarsWithJR]

Yes.

[@darioceja4044]

Would you recommend pad slapping it on 26K mile rotors. My sti's brakes are starting to squeak and have major brake dust. Or would you recommend I get these pad & new rotors ?

[@CarsWithJR]

You could probably get away with it but I always recommend getting new rotors.

[@darioceja4044]

My WRX Channel any recommendations on rotors ?

[@vballwise]

I replaced my pads right around 30k on my STI but at around 38k there was a fairly large lip on my rotors, I should have replaced the rotors at the same time. But good thing replacing rotors is easy!

[@A90MKV_]

Where can I get that car lift ?

[@CarsWithJR]

Quick Jacks.

[@lazydaze71]

I assume you didn’t need to roll the fenders with those wheels. Looking at the same ones in black

[@CarsWithJR]

Nope. Not at all. It would also depend on ride height and tire size.

[@lazydaze71]

Thank you. Gonna be same tire size and and similar ride height as yours. I like the way yours sits. And 5mm spacers I think you said in another video on the fronts?

[@justinturner4850]

How much do you have into your car so far? Gives us a realistic ballpark of what it will take to get there.

[@CarsWithJR]

Good discipline in saving money.

[@justinturner4850]

My WRX Channel and a wife that supports the hobby. I’m still in trouble for buying wheels and suspension lol.

[@CarsWithJR]

Trust me...I know the feeling. Sometimes, the UPS truck gets me in trouble. 😂

[@TheDanche10]

What’s the brand/name of the car jack?

[@austinmatthews255]

Quick Jack

[@justinturner4850]

6:34 well, it’s not your cracked windshield 😉

[@CarsWithJR]

Ha...Ha. That's actually getting replaced very soon...finally. lol

[@justinturner4850]

My WRX Channel just messing with you bro, I got nothing but love and respect for you. I live on Maui so we don’t have freeways of big trailer trucks throwing rocks at our windows. But there’s no track here so can’t win em all. There are some great twistie roads but I’m dying to drive on a road course like in your track videos.

[@CarsWithJR]

Thanks Bruddah. ;)

[@jacksonbeckley6295]

First face show?😂😂

[@xsliick]

Nah, OGs know.

[@nixwrx]

do these fit a 18 wrx?

[@xsliick]

STI only.

[@austinmatthews255]

I don’t see anything for 2017, waiting for them to respond

[@evlx14]

Cobra 🐍 Kai rules!!? 😂

[@CarsWithJR]

Strike First. Strike Hard. No Mercy.

[@mattlo7978]

Save some money buy a rotated kit used and buy the turbo new if you need new or buy a whole rotated setup used. Save yourself a ton of money. Too many low mileage subi part outs 👍

[@b864r]

Do you have those spacers to clear the brake caliper?

[@CarsWithJR]

Yes, just in the front. 3mm spacers.

[@thatonebeone]

my brz ts 2020 loves to shit break dust ..

[@travisiswin]

Ignoring us for Cobra Kai is acceptable, I guess.

[@kristoffersonluna6502]

I think you're from the 🇵🇭 hahaha

[@CarsWithJR]

Of course. Born in the motherland. 🇵🇭

[@kristoffersonluna6502]

@@CarsWithJR Nice one kabayan! Ingat palagi! Greetings from Subaru Club Philippines!!

[@evanphotography5149]

Stay away from these G-loc brake pads, they caused damaged to my rotors on my C8 Z51 and I end up needing a new rotors and the brake pads, also Danny from G loc stopping answering emails regarding these issues.

[@anthonychan3]

.

[@Carlos.Rivera]

.

[@masonmiers4255]

@@Carlos.Rivera .

[@vballwise]

.

[@carlodelossantos6347]

bro im have 2019 sti.. just wanna know is this pads get rid of the annoying brake dust

[@kylegeddes1700]

What car lift is that?