The BEST bridle inserts for speargun rubbers - Spearfishing Basics!

[@Francisco.Figueiredo]

More DIY brother!! You make the best learning content on spearfishing. More please. We have so much to learn!!

[@lukecunningham2020]

and francisco means, very best on all the internet! :D

[@thegamingknockout4261]

Settle down spaz

[@Francisco.Figueiredo]

@@thegamingknockout4261 Go play Fortnite kid.

[@sergios8859]

more people need to know this guy, he's a legend

[@HazeOutdoors]

Just snapped my bands so this is perfect timing mate. I LOVE YOUR WORK

[@DanielMann]

I’m sure they won’t be too hard for you to knock up. Got the whip last week so I’ll be coming to terrorise those signal crayfish with you soon enough!

[@BreathlessRSA]

Dan the Mann strikes again! 1st class mate, thanks for sharing! Can't begin to imagine whats next...

[@EthanYeo1]

Nice and simple video, will definitely be using this bridle insert when my rubbers break next! Would love to see more of these technical gear videos 👍

[@DanielMann]

Cheers Ethan!

[@offthehookproductions4481]

Yes please! I truly appreciate you helping with the maintenance and prep of spearfishing! Super helpful. Thanks!

[@ruri5062]

I always give Daniel Mann's Videos a like. He deserves way more coverage then he gets.

[@eduardoperez7797]

You are the man i learned more from your videos than any other place thanks

[@Seerwealth]

Your experience and all videos are a priceless DANIEL. Always to a point without baggage blah-blah.THOROUGHLY enjoyable. For an AUSSIE, you are a cool dude. Education in diving is learned, but WISDOM is EARNED. So little time and so much still to learn. My daily request is ***GOOD LORD: GIVE me patience ~ but HURRY ***! You are a KING of the DEEP. Be safe and blessed.

[@kevint5286]

Really good idea. I will have to remember to give it a go next time I'm working on my bands.

[@atdi72]

Just finished rigging my new small 75cm Apache with 16mm rubber. Close ups on the knots are a huge help! Big Mahalos Mate!

[@mitchellmole6882]

So much respect Dan, I really appreciate that you actively push as much knowledge as you can into the spearo community. Good on ya!

[@hotchesh]

I just did it the regular way. First time doing it myself and not someone in the shop doing it for me. I wish I saw this video an hour earlier. Next time will do for sure or just prep some to have. Thanks!

[@peterthermocline]

excellent as always. Crisp clear British accent.

[@DanielMann]

I’m from Australia 😂

[@djwasteman13]

So interesting. Never thought I would be into spearfishing.

[@fifis101]

Well done man. You don't see enough DIY stuff.

[@claytonm1089]

The best spearfishing channel on the tube

[@DanielMann]

Too kind 🙌

[@vanzijlp]

LIKE YOUR tips - Old dog is learning new tricks :) Keep them coming...

[@joachimklawe8639]

I've already learned a lot from your DIY videos! Thanks for that - and gladly more of it!

[@crabbypatty894]

One of my favorite youtuber Spearo : )

[@DanielMann]

Thanks!

[@crabbypatty894]

@@DanielMann welcome Idol

[@TheOutdoor_Guy]

I've got to give this a go, thanks for the video 👍

[@DanielMann]

Should be simple after making your own gun 👌

[@jakedicostanzo8715]

You've got to be a sparky with channelock long nose and marvel pliers. Love your work man, keep it up. Shouts from Sydney

[@DanielMann]

Those long nose pliers are the only thing left from my original tool kit as a first year in 2006. I don't do much electrical work these days but the tools are handy none the less.

[@thejagerbomber3782]

Think I've binged all of your videos past few days in preparation for my first go at spearfishing this weekend! Awesome videos, got me pumped to go!

[@dragonier8133]

Love these DIY vids and the camera work for detail. Thx.

[@mertefe8060]

Fav KZbin channel ever

[@antonykornel5156]

I'm gonna try this brilliant method on my omer rubbers too. Thank you nice vid!

[@johnallison4688]

Brilliant Daniel, I wish I had this in my day, your postings continue to serve this great activity.

[@mish441]

Yep, another awesome video. Thanks to this channel (and a few others) the learning curve for my spearfishing addiction has flattened considerably. Cheers mate!

[@immersionoutdoors3472]

Thats a great idea... Thank you Daniel I look forward to more great DIY from you.

[@svenjaminfranklin471]

love the how to's! I go back and watch your how to tie knots vid every time I need to do rigging, and all I can say is I get a shock everytime I see them long locks

[@DanielMann]

The long hair was glorious but very impractical.

[@Seerwealth]

@@DanielMann So was SAMSON's lol.

[@TheOceanman290]

Just brilliant..............I'm onto this. Yet another informative video.

[@DanielMann]

Thanks Orchy, I’m sure you’d gave a few sets of the old stainless ones Herman made around your shed.

[@christiankeller6476]

love these types of videos man! keep them up! if you ever in the Florida Keys make sure you do a meet and greet!

[@marioscarpuzza1385]

Well done Daniel, very good idea. Thanks for sharing it with us. Ciao ciao 👍💪💪😎

[@calvinh208]

You seem to be the only one who actually teaches this stuff. Well, at least the only English speaking. Thank you!

[@Seerwealth]

Save time not be forced using GOOGLE bad translator ~~lol.

[@saqaleka]

Perfect. Can't find those pre-made cressi ones so made these.

[@bobclark4994]

Another good one Daniel. More diving and tech stuff vids please.

[@gromageindustries6745]

I like this, I think they're great 👍 thankyou Danny boy! 🙏💙

[@steve-adams]

This is excellent, thanks. My first rubber is starting to look like it's approaching EOL, so I'll be following your videos to create some new ones before I head out again.

[@jessemann4473]

More bloopers please. Love the work brother.

[@DanielMann]

There are more bloopers than actual good takes 🤣

[@bentregoning9139]

Great video! More of these please

[@sambob6428]

Awesome vid - I refer people to your other video about how to put together a speargun rubber all the time. Awesome to have another point of reference.

[@DanielMann]

Thanks Sam!

[@darrellbice5551]

Just getting into spearfishing, learning a lot from you!!!! thank you for your time and effort for making these video's

[@MrAndroid91]

More diy bro.. I mostly diy my spearfishing gear.. Thanks, this add to my next diy thing..

[@ISMACGREYSUB]

Good DIY DAniel..Cheers mate!!!

[@galaxystar703]

Yooooo beautiful video makes me want to and try my own hand at it. The vibes, wakes my instinct I wanna go, setup a playlist with *Metallica* One and *Delta Parole* Wasted and go off into my own world right this moment.

[@Blackfish46]

Thats fantastic Dan, great practical piece of equipment.

[@StaunchIndustries]

OOOhhhhh the devil finds work for idle hands.. Someones been busy during lockdown. That is a superb hack! Im off to buy some split pins right now...

[@reybanalo803]

Thank you very much sir for the clear illustration.

[@DanielMann]

You’re welcome

[@timothyhutchins4668]

Found your DIY stuff great. Took your advice and got a decent warm wetsuit for my son and I, we’re gonna give it a go this Sunday. It would be good to see a video on reading the weather. Here where we are it could be pretty disastrous if you get it wrong.

[@HarryLindley]

Was waiting for the link to your online store. Guess I’ll have to use the info. Such a banger trick.

[@DanielMann]

Ha, I doubt I’d be selling many home made bridle inserts!

[@XhaleSpearfishing]

Very clean! This is much better than many of the commercially available ones I've seen out there. I personally don't like having anything hard inside my bands, especially in high stretch setups, but this is a great diy design!

[@DanielMann]

Fair enough, I mostly use conventional style spearguns so it’s not a problem. I can see with a roller though you’d want to have the soft one inside.

[@XhaleSpearfishing]

@@DanielMann Yep, rollers are what I had in mind in particular. Best to keep everything soft. I may be using your inserts for conventional bands for some customers though 😏

[@ottotass3059]

Thanks, that's brilliant, alway's looking for ways to make my own kit!

[@heavyweight0111]

Super nifty! Looks like my rubbers will be treated with some new bridles soon 😜

[@jonathanvildosola2824]

Always quality info. Make sure to patent that!

[@Seerwealth]

Do you want to become his manager? LOL!

[@over1498]

Love the DIY. I know it's a tough ask currently, but I miss the competition day recap videos. You make it feel like we're there with you on your team, epic. But I'll watch anything between my shoredive hunts. Keep it up brah.

[@DanielMann]

I wish I could be diving competitions this summer. Missed world championships in Sardinia as well due to covid.

[@michaeldickson6963]

Nice work! Heading to hardware now!

[@mehdimeziani5925]

Nice tips ... i will try it on the next maintenance

[@MrJoebass702]

Outstandingly helpful as usual!

[@matthawken]

Hi Dan great idea. Have you got a link for the beads? UK based?

[@kannonallen5792]

nice one dan i love this type of video keep em coming

[@DanielMann]

More to come!

[@jonathancorasmin3614]

I really love this method ..## Can you please make a video on how to place these inserts into the band.....PS thank you so much for sharing ..Really great stuff..Your'e Awesome.

[@chriswurst2656]

Thanks for sharing your knowledge with us!

[@knightclan4]

Brilliant

[@AngieWolfK72]

Thanks for the info! Tying the bands is the least favorite thing to do. This will make it easy ❤

[@SouthernSpearfishing]

I would like to see more of these type of videos in the future.

[@DanielMann]

Likewise for your films... 😎

[@SouthernSpearfishing]

Daniel Mann haha, touche. 💙

[@timhulme1085]

Game changer mate..!!!

[@karenmaealoraalora4041]

Worth the wait! The one and only spearo i ever wait to upload videos on youtube ❤️

[@darrylriley9917]

Good job Dan forever the tinkerer mate!

[@DanielMann]

Always something to tinker with in spearfishing.

[@rockymountaindivers]

Instead on using the pliers to seal the end of the melted bead. I use a old metal spoon to keep things rounded on the ends. It helps me to not have to file things down.

[@DanielMann]

Great tip!

[@Ashcooper117]

I’ve been using a small seal pick to undo my bridle knots

[@timothyhutchins4668]

Great DIY video. Really helpful and interesting.

[@mikey2864]

Excellent! Thanks.

[@ericlowe277]

yes add more videos like this

[@lukeottaway2216]

Amazing as always

[@williamturner3353]

Thats awesome ay haha your a genius honestly im going to use that system for my guns from know on!!👍

[@redouanespearfishing4612]

well done congratulations

[@MrG-nr6ne]

Homemade dyneema wishbones are less laborious, lighter and almost as practical as those. Best and easiest imo. Great vid as always though, thanks for sharing!

[@DanielMann]

I did explain in the first minute of the video why dyneema inserts aren't as good as these. They bind up after being used on the gun a few times.

[@MrG-nr6ne]

@@DanielMann yes they do but for the price l just cut off the couple of cm of dy wishbone and place another. I usually carry some spare dyneema on the buoy in case l have to change mid dive. Not ideal with gloves so beware

[@AntoniEesti]

Great idea bro !!Bravo

[@mad_and_lost9231]

wonderful idea. tnx.

[@davidcohen3247]

Great DIY tip! More please :)

[@ImpactZoneSpearfishing]

Didn't think making rubbers could get any more tedious hahaha! Off to Bunnings I go then...

[@sebzh5339]

Hello, Nice movie Just one question, where do you find your plastic ball for the rubbers ? Thanks 🤗

[@derraltames738]

Thanks mate 👍

[@karlstokes874]

Brilliant tip mate!

[@DanielMann]

Cheers Karl.

[@FranciscoAlbertoSaladinH-wm7yv]

Exelente heres un gran buso buena explicacion

[@ΓιαννηςΡουμελης-ξ4τ]

Nice video bro!!!

[@slackstringlvr]

Really cool idea mate, thanks for sharing, would love to see more DIY for sure! Cheers :-)

[@guilhermanacas]

"Watch why Spearfishing Stores hate this guy!" ahah! Great video Daniel!

[@DanielMann]

I make no apologies for spreading knowledge 😁

[@Seerwealth]

@@DanielMann The BIBLE likewise. ;-)

[@bradmacintyre4026]

Daniel Mann I cant seem to find the plastic clips anywhere everything’s already preassembled 😂 (I’m hopeless) :/

[@Braus.M]

Love the vid!

[@franciscopereiradasilva5543]

Thanks Mann

[@REDAAVMRida]

I love that , More information please 🙏🏻❤️

[@heinrichthomsen366]

So nice mann more off that

[@skyespearfishing]

Great tip! Thanks for sharing!

[@DanielMann]

Glad it was helpful!

[@UKSpearo]

So helpful, thank you 😁👍

[@Smbydj]

love your vids daniel keep them up

[@Gearsub]

Yes please more DIY videos

[@cakirim82]

Dude, you're great... 👏👏👏👏👏

[@j-pella4087]

Wonderful keep up the good works 💯👍

[@jppescasub9587]

Good Video Danny

[@jc136982]

Awesome, I will definitely make some