The Best Cordless Compressor?

zaysbarbersupp...
Follow Me On My Other Social Media for More Content:
Instagram: / cutsbyreggie
cutsbyreggie.com
Gamma+ Discount Code: CUTSBYREGGIE (gammaplusna.com/)
Stylecraft Discount Code: CUTSBYREGGIE (www.stylecraft...)
BabylissPro Discount Code: REGGIE10 (babylisspro.co...)
Monster Clipper: REGGIE10 (www.monstercli...)
Caliber Discount Code: REGGIE15 (caliberprocorp...)
Krazy Good LLC: REGGIE10 (krazygoodllc.com/)
26KingWavy Discount Code: CUTSBYREGGIE (26kingwavymerc...)

[@BeeBoie]

Mine never sprayed right after the first week, I cleaned it so many times and changed the spray tips and it never worked again. I think the big flaw it you can’t 100% clean it, you can’t take the needle out and unclog it if the paint gets dry. The only way to clean it is to put alcohol and spray it out before the paint dries.

[@dc_crush]

When I unboxed mine and seen the 8 hrs I was like wtf let me double check the run time. Is that 50 minutes run tune it 50 hours 😆 has to be a typo

[@ask_for_drew2152]

So I gotta grey and purple one. Has a dif brand but same gun. I’ve had mine over a year. And it’s a beast.

[@tyushudson4040]

What's the name of it?

[@jaywavy840]

Where you get and what’s the name of it ?

[@dc_crush]

I’ll do my review next but he isn’t lying this compressor is 🔥 a bit pricey but at least you get some additions to it. It’s give this compressor an 8.5/10

[@brayanperez2454]

How do you clean it ? I feel like mine clogs all the time

[@dc_crush]

@@brayanperez2454 i put rubbing alcohol on it at the end of the day. That way all that stuff doesn’t just dry up and clog the machine

[@brayanperez2454]

@@dc_crush thank you I just unclogged it yesterday and works like a charm again

[@MrFRESKOTV]

Yea the key usually for me is to not let the dye sit at all even after a cut, just put enough for your client then dump it and put rubbing alcohol in it and let it sit until your ready to use again dump and put dye

[@caponeda-don9246]

so which one is a 10/10

[@24kcuts]

How does this compare to the tomb45

[@TheQuedog15]

I actually like the amount of throw on it better than the tomb 45 cl

[@backwoodsbarber]

Might get one… but honestly all of them do the job.

[@robrealcuts]

Any you’d recommend that are cheaper ?

[@turdferguson8322]

Bruh. I watch Seinfeld at the shop too 😅

[@joeskichavez395]

Good stuff Reg 💯

[@BlackMarketCutz]

Good review I don’t need it, but I’m buying it just off of your review! Stay on the grind brother much respect

[@ericscutzboominyt9760]

What airbrush do you use mainly?

[@BlackMarketCutz]

@@ericscutzboominyt9760 man I back using my plug in. I bought that cordless one but it broke the first week I definitely don’t recommend it. They are poorly designed and it’s pretty much impossible to repair it. I’ve bought cordless one off of Amazon that works better. But nothing has last longer than my old school plug in compressor!!!

[@kiingknowledge4ever]

Plz don’t

[@KINGBARBERGRAM]

Kool brother 🔥🔥 hurricane 🌀 coming here in Orlando

[@BigT1523]

Reggie Reg!! Good morning big dawg!!!

[@suzettesmith586]

Okay, spray paint...nice 👌 Mama loves her baby 😘

[@mine_all_the_time0793]

Great review!! Keep it coming !! Roll tide though 😂😂

[@stooplo1836]

Have you had to take it apart for any cleaning/maintenance?

[@stooplo1836]

Hey Reggie. How do you like this compressor now? 2/23/2023

[@zaycasso6599]

Can get the same one from TheBarberPlug for $119

[@jrkinley]

Just curious have you done any vids on using enhancements on yourself for the home haircuts?

[@hairbywill2896]

As a cosmetologist could I use this to apply liquid color on a root touch up . Is it powerful enough for that?

[@CutsByReggie]

Definitely will get the job done.

[@barberloc]

Does your valve get stuck to where it sprays without you pressing the button or it leaks

[@kameishagreenunapologetica8210]

Just unscrew the cap on the nozzle then use that little wrench to tighten that nozzle! Put the cap back on and that fixes the leak and mist button getting stuck💪

[@barberloc]

I've taken the cap and all that apart multiple times the little valve won't move forward enough to cover the hole and stop the leak

[@barberloc]

@Kameisha Green UNAPOLOGETICALLY ME! do you have and Instagram maybe I can contact you and you show me what I'm doing wrong

[@kameishagreenunapologetica8210]

@@barberloc dointhamostcutz hit me up so I can try to send you video.

[@barbertrappin1012]

I'm having the same problem. The small white/clear rubber stopper that's slides when u press the button doesn't cover the hole enough mine spays continuously

[@denisbasshead7787]

Oh yeah Dope

[@sc80386]

😂169.00 😂 they are getting those spray from Alibaba😂

[@claudiog713]

Mines not spraying like this:(((

[@egotisticalquan7247]

Did you figure out why?

[@ericscutzboominyt9760]

Did it ever work for you??

[@NailTechiana]

How long did it take for you to receive it after you ordered?

[@CutsByReggie]

About 7-10 days

[@prodnikorosario]

Been waiting almost 5 weeks for mine still hasn’t even shipped!

[@barberloc]

It took mines almost 2 months

[@membersonly8547]

❤

[@hhh.b_b.v]

I can purchase this $50

[@angelldabarberlife1599]

Where at ?

[@kameishagreenunapologetica8210]

Right just got mine💪

[@zaycasso6599]

Thebarberplug

[@brayanperez2454]

I bought this but it clogs so easily for me. I clean it quite often so I don’t know what I’m doing

[@xabierrodriguez2903]

Your mixture ratio probably off.

[@brayanperez2454]

@@xabierrodriguez2903 I would use the dye they sent me. I had a defective one though. I reached out to them and they sent me a new one. This one works great. I haven’t had any issue with it whatsoever

[@OKLAHOMALOVE2]

Did you say 8 hours of charge time for 50 minutes run time? That's craaaaaaazy lol I wonder why the need to charge so long. I love everything about it but for that reason I am out Reggie lol

[@blackprince398]

I respect your opinion but this airbrush sucks, I tried it ,so did other barbers not worth the money definitely wrong on this one.

[@CutsByReggie]

We all may have different experiences. But I have yet to have a problem but another barber in my shop don’t like it either. No one is right or wrong, in my opinion.

[@terrellmoore5592]

That air compressor clogs up too fast 🗑️

[@allenclay7576]

What would you recommend

[@MrFRESKOTV]

@@allenclay7576 any compressor clogs. You have to clean after each cut with alcohol. If you wana keep any compressor running clean and like new

[@kiingknowledge4ever]

No

[@ardeeselmon4112]

This airbrush is trash!!!

[@CutsByReggie]

It is, after further use, it’s terrible.

[@334coldestbarber7]

@@CutsByReggiewhat changed after further use?

[@dc_crush]

When I unboxed mine and seen the 8 hrs I was like wtf let me double check the run time. Is that 50 minutes run tune it 50 hours 😆 has to be a typo