Here is a link to the tools I used in this video, amzn.to/2KSFikb Here is a link to the gate latch I used it is very affordable. amzn.to/2ZmgBRb
Пікірлер: 184
@teh605 жыл бұрын
That was a good tip about being able to adjust the orientation of the latch. Nice job Handyman.
@brouhajoe5 жыл бұрын
I dig that you're doing more basic instruction and simpler projects lately.
@primoservices56365 жыл бұрын
Hey Handy man I have installed all the types of gate latches and you are right this is the best and the easiest and last long time as long as it is done right. I live in florida and many of the diy guys do them wrong and don't last long. After storms or hurricanes I do many of these. Good video very simple but goes a long way for the diy guy and handy man for sure. Thanks and till the next one !
@Jots733 жыл бұрын
I received the new hardware for our gate from Amazon and it didn’t come with instructions!!! Dude, I’m glad to have found your video!!! It has made it all so simple to do!! Thanks!!!!
@michaelsj80843 жыл бұрын
I've been a sub for a while now. I was just finishing up a new fence/gate project. I ran into this exact latch problem. Thanks for the solution, dude you're the best!!!
@gradywray53915 жыл бұрын
I literally just installed one of these on a new gate for a customer. These are the best by far.
@klittle31475 жыл бұрын
Nice video… And yes those are great gate latches! Personally, I like to keep them upside down to help support the weight of the gate while it’s closed. I think it takes some of the work off of the hinges and helps to keep the gate from sagging. Nice job
@xxgreatnatexx5 жыл бұрын
Those socket adapters are the best thing ever. I've got a few of em around.
@jonosapi5 жыл бұрын
I've watched 75% of all your videos and I really like how you gave "do it yourself" type of advice in this video. Some of your more complicated projects would of been nice to have that dummy proof kind of answer. Keep up the good work Handyman, hopefully Handy Andy didn't electrocute himself!
@alexcoyne515 жыл бұрын
Didn’t know you could flip the latch, can’t believe I didn’t know that! Will be doing that to my gate now! Thanks handyman!
@michellebeaty61024 жыл бұрын
Very Helpful Video! I bought an Everbilt Thumb Latch, but will return it and buy the one in your video. Looks much easier to install. Thanks!
@Stormshadowlover5 жыл бұрын
Have this set up on my fence when I moved in. So nice and convient
@michaelsteinbach5 жыл бұрын
Nice and quick! I imagine if the screws on the latch (on the gate) are stripped and you don't want to drill new, you could just drill straight through and use carriage bolts.
@nickk40103 жыл бұрын
Just got one and thanks to your video and some nice tools with an impact gun and a few drills it took 5 minutes and works awesome! I used your link so you can get a cut, learning a lot as a home diy, self described hack.
@myhermitlife5 жыл бұрын
Quick and informative as always!! 👍👍👍
@briannav41355 жыл бұрын
Have gone to these a few years ago. Now with 100s installed, I buy them by the box. Some like to leave upside down to help if gate sags. It rides up into latch.
@dannydee99194 жыл бұрын
Dude, your videos are one of thee best. Your camera views cover every important angle pertaining to the job, your narration is clear and concise and overall you look like a good dude willing to help and share your knowledge. May i suggest something? Use impact rated sockets when using sockets with an impact drive, the black ones. The regular chrome sockets are not rated for impact driver use and can shatter into flying tiny pieces if they give way. Sounds far fetched but I actually had one shatter while using it, I was grateful that the tiny pieces hit my chest and I was wearing a carhardt hoodie and a couple of the pieces grazed my head, had they hit my eye it probably would of done something pretty bad.. Anyhow, you have a new subscriber in me. Looking forward to learning from your videos!
@OtisHumphreys5 жыл бұрын
Another solid video from the Handyman!
@kcthehandyman39445 жыл бұрын
I love the return system at Home Depot!!! Just has a situation for a client ware he provided 3 closet hanger rods. Got two short, and 1 long, needed 1 short 2 long.
@jskin1555 жыл бұрын
Potting soil bags make good impact gun setter downers.
@Egalitarian-bt7kz Жыл бұрын
Wow, I really needed your video and you were spot on for my needs. An ENORMOUS thank you and well done…
@PFCRodriquez5 жыл бұрын
I’m tired of you making so much money on these simple fixes. 😂 Keep it up Handyman. Love your videos
@lockedin605 жыл бұрын
If my memory serves me correctly my old Dewalt Cordless Drill Driver set from some 15-20 years ago came with the socket wrench adapter.I am sure that I had an additional one that i used with my corded drill driver set. My dad was a shadetree mechanic and did all grade of repairs at our house so my intro to tools was at an early age.
@metalstorm62 жыл бұрын
You make it look so easy! Question - how can I make a simple lock for the inside of this exact gate and latch, to keep people from walking in thru my gate uninvited? Thank you!
@aaron85645 жыл бұрын
Love the socket attachments have the short ones and the 6in ones from husky nice video
@name.terrie Жыл бұрын
Thank you for this!!! Much appreciation!!!
@thuggedwhiteboy5 жыл бұрын
Ty for mentioning the thing about the pliers
@CarolinaBluez3 жыл бұрын
Awesome! Thank you so much!!
@lowellwatson317811 ай бұрын
Thank you for sharing very helpful
@OtisHumphreys5 жыл бұрын
Nice flip flops Handyman!
@lgloster42983 жыл бұрын
Thanks for the info!
@jituxx75703 жыл бұрын
Tysm for this valuable information! But , I have wire fence gate . Can I put this latch closer in my this gate ? And can be this locked? Thanks
@josepharanha2464 Жыл бұрын
Love this video. You make things look so simple! What lock would you recommend?
@queeneywarren94743 жыл бұрын
Thank you for sharing the video
@deannawoody96215 жыл бұрын
Great job
@michaelstibbe9722 жыл бұрын
Good video, I installed two on my gate, one higher one lower, what can I use to connect them so only pulling once
@mingyang49015 жыл бұрын
thanks for the video. i just realized we just installed the latch upside down, although it works haha
@deetch78613 жыл бұрын
He actually installed it upside down lol there's a hole supposed to be at the bottom for a lock not the top. And it's a no sag latch when installed the right way
@TheAlpine492 жыл бұрын
Good job!
@hennesseyme91122 ай бұрын
Thank you!
@trailboss783 жыл бұрын
Nice job I like it
@MoneyManHolmes Жыл бұрын
I like to add some blocking for the gate to rest against so the bolt striker thing doesn’t have to absorb all of the impact of the gate closing.
@josephlacerra84335 жыл бұрын
Funny how areas differ. I almost never see that type of fence around here (Philadelphia). When you do see them they are referred to as 'Stockade Fence'. Great vid, as always. What's the charge?
@OtisHumphreys5 жыл бұрын
Question. Why use manufactured deckboards when the substructure is still treated.Will it last longer with all the joints.
@budsmith54 жыл бұрын
Thanks 😊
@e.m.tanner179 Жыл бұрын
Very Nice video. I'm building my own fence with a 4' wide gate. But I wanted my gate to open INWARD, to the yard, since clearance is limited outside the opening. I bought this same gate latch, but I'm confused how to install it when the gate opens IN. Is it always common to have the gate open OUT, as in your video? I've never built a fence before, and I'm rather confused about the gate swing and how to install the latch and hinges.
@kmonnier5 жыл бұрын
Amen brother, I had to replace a latch with this one.
@tomthumb20625 жыл бұрын
I appreciate the smaller vids I know your busy on other things but I am beginning to miss Polly..
@optimusprime62995 жыл бұрын
I prefer the latch upside down because it will help prevent sagging within time.. additionally I prefer Home Depot latch versus Lowes latch. The latch on your video is from Lowes.. however great video.
@brentjohnson66544 ай бұрын
Nice video. Straight forward. Question: what latch works on a t post?
@cleanhonda33311 ай бұрын
We have the same latch on our fence. Can you recommend a lock for this configuration? Its a pain to get a regular lock to fit.
@strangecountry67335 жыл бұрын
Handyman thanks for all video you do i been watching all of your videos and learn a lot thanks I have question about tile backsplash I know i can tile over drywall you said that on one of your videos but can you please tell me what materials i can use to tile backsplash and the drywall is painted already do i need to scrub the paint if i need so what i need to use to scrub the paint thanks😊
@TheHandyman15 жыл бұрын
Just go right over the paint with your mastic or thinset.
@strangecountry67335 жыл бұрын
@@TheHandyman1 thank you for replying you are the best 👌😊
@ha60342 ай бұрын
Thanks needed to know how to flip it around
@michaelw21083 жыл бұрын
I bought an adjust fence and it comes with a smaller gate latch I was thinking to get a larger one like your video
@918scott45 жыл бұрын
Sorry about the missing lag bolts.. I needed them for another project.
@louisheathernelsen4863 Жыл бұрын
Thank you very showing me how you do that. You can open the gate on both sides. That was what I wanted. What was the name of that latch and was it at Lowe’s or Home Depot?
@bbass56 Жыл бұрын
Is there a handle you can put in the hole to make is easier to open ? I installed one on our condo's garbage dumpster and some of the people say when they open it it hurts their fingers ?
@vienadolcemascolo27603 жыл бұрын
I just lost the bolt that make the latch move up and down . May I just buy that specific bolt in any where?
@AlphanPeter2 жыл бұрын
we get really strong winds will this latch keep the gate close
@NikkyP81711 ай бұрын
Is there any shield that can be put over the latch that’s on the door? Anyone with a socket wrench can just remove it to get inside
@maximousey3 жыл бұрын
We have one of these. The most problematic part is the spring. It came loose a few times and needed to be rehooked. This last time, it "sprung" some direction, never to be found again. The latch still works (manually). I'm not in the position of trying to find an exact replacement spring . . .
@andy-jac5 жыл бұрын
Those are the ones I install too. The thing about these latches is that the gate has very little sag room over time. I always add a (gate) turnbuckle cable and teach the homeowner how to adjust it if the latch suddenly stops lining up. ( I hate "be backs" ) - Thanks for the video Handyman!
@harryl82342 жыл бұрын
I know you just replace your old gate latch and used the existing holes on the post. Is there a rule of thumb on the maximum gate latch should be installed for a new install?
@albertcassler87635 жыл бұрын
Trigger happy with that impact gun...
@DonnaGHarris483 жыл бұрын
Does the latch go on the inside or outside?
@engrpiman5 жыл бұрын
I just put on a new gate latch. I was looking for this kind of latch but couldn't find it
@robinseward59602 жыл бұрын
Hi I need this latch can you tell me what brand that was please and thank you
@pedrochavez98915 жыл бұрын
I’ve used the same ones, twice already
@asondareyes54825 ай бұрын
What can I find or use to lock it? We had some one to fix the fence and make us a new gate but u can’t lock it.
@Hussain-ch3pr3 жыл бұрын
Hello, whats the name of this latch? I'm from the UK and cant seem to find it here....
@christopheralegria715 жыл бұрын
Holy crap! I did not know you could flip the latch! I installed my gate latch upside down. (Sigh)
@droolbunnyxo95655 жыл бұрын
Lol! Don't feel bad. Dumb me would have switched the hinges so the gate opens on the other side, thus doubling the work effort! 😂 (And it would probably still be wrong.)
@patriciadavila32411 ай бұрын
A wire and a round piece came with mine is that to lock it and how do you use it?
@mailmanx693 жыл бұрын
2:57 - Yup, need at least three arms and hands. I have that problem on just about every project that I attempt! I'd have been teased mercilessly in school if I had a spare arm, or two, but it sure would have paid off as a "handy" adult!
@pamdavis90772 жыл бұрын
You saved me! Just ordered one! Can you put a padlock on the inside of the gate latch?
@MoneyManHolmes Жыл бұрын
The better brands will have holes for a padlock on both sides.
@the3rdbestnikkashopinyoura5405 жыл бұрын
What do you do when the lag bolt holes are loose/sloppy? Reposition the latch to another location?
@TheHandyman15 жыл бұрын
Yes
@queeneywarren94743 жыл бұрын
Do you know how to repair a electric craftsman air blower bag it has a tear in the bag
@amyleaberry41574 жыл бұрын
My dogs would push on the bottom where there is "give" and escape. How do you make a more secure closure that a dog could not squeeze out the bottom?
@richardroddenberry20792 жыл бұрын
what about wooden gate that is on a cement block fense?
@TheNottonight5 жыл бұрын
So how much did you charge?
@alexvidal6215Ай бұрын
Can it be locked from the inside? And how? Thank you.
@felif3604 жыл бұрын
Does anyone know what that screw is called? I have the same exact type of latch on my gate, but the screw fell out and I can’t seem to find it anywhere.
@kkadams572 жыл бұрын
Lag
@lisabethflowers7921 Жыл бұрын
How to attach the wooden beam attached to the house to put the latch too
@samgriffin62215 жыл бұрын
What you charge for this?
@daniel923e5 жыл бұрын
How much did you charge for this job?
@jenniferjohnson68972 ай бұрын
How do you lock from inside?
@danb7815 жыл бұрын
Where did you find that latch? I could find it anymore
@TheHandyman15 жыл бұрын
Link is in the description.
@naui25 жыл бұрын
Wassup!
@mountain_dweller Жыл бұрын
Something I have started doing is putting a dab of silicone on the end of the machine screw that holds both pieces together. Over time that little screw can back out and fall to the ground and it can't always be found. 😆
@ShakespeareCafe3 жыл бұрын
Harbor Freight socket attachements
@DurgaDas963 жыл бұрын
What about the latch? Brand?
@tobyhigginbotham25643 жыл бұрын
Because it’s a privacy fence wouldn’t you want to have it where you can put a pad lock on the inside?
@FerrisBueller-sj5sc4 жыл бұрын
How much was that?
@droolbunnyxo95655 жыл бұрын
Every time the wind blows this same latch on my neighbor's fence gate swings open. I've seen it happen a few times & told them. But they insist it's prowlers opening the gate & sneaking around their yard; peeking through their windows. Thanks for this video, maybe I'll attempt to fix it for them. Their imagined tales of terror & refusal to believe me is just too weird to hear anymore.
@smokedbrisket3033 Жыл бұрын
what's the reasoning behind putting the padlock side of the hasp on the outside?
@lifeofahandyman-ui9xk Жыл бұрын
You can put padlock both sides if the wood is not in the way or you cut out room for the lock. i like to give the client options. But this was a quick fix i guess.
@brynyard5 жыл бұрын
Might not be that intuitive, but using such an adapter and "regular" sockets means that the impact wrench loose quite a bit of its power when loosening and tightening bolts, the flex in the adapter and socket simply converts that power into heat instead. Just so you're aware and/or wonder why they sell much pricier "impact sockets" when regular sockets usually works just fine.
@derek200525 жыл бұрын
quick 150.00 or more handyman whats the charge
@georgegeorgel72542 жыл бұрын
Why u dont also install a spring for the gate?
@cmfukar872 жыл бұрын
Why have the latch that way? Wouldn't you want the lock hole on the inside?? Was hoping you would explain the proper way to install it and thought you were on the right track when you said you can flip the latch. Just don't understand why you would want the lock part on the other side of the fence. Especially with a privacy fence I'd understand with a 4 foot fence and it would not matter which way but how can one reach over a 5' or 6' fence to unlock the lock?
@jamesknightreading5 жыл бұрын
Are those holes for a padlock?
@TheHandyman15 жыл бұрын
yes on the inside of the fence
@richardraymond55355 жыл бұрын
Did you move that latch farther out after you first put it on hmmm🤔🤔🤔
@TheHandyman15 жыл бұрын
I put both pieces on one time.
@JohnSmith-mk8hz3 ай бұрын
I realize this comment is 4 years old, but.....I saw the same thing you did. He moved it and put the bent tabs on the corner of the post where he should have put them the first time.
@lifeofahandyman-ui9xk Жыл бұрын
LOL. This is the first video I have watched from this handyman. Overall, good video. But I freaked when he started to put that bolt back in with his power driver. NEVER EVER do that. Always start it by hand first. For newbies it would be best not to tighten the bolt with an impact drill! if you noticed, he he fast reflexes with the trigger finger and skill with the drill. You do not. Tip: Place the screw tip over the hole and turn it in the reverse direction until you feel were the thread starts. Then turn in the right direction. (righty tighty.) Advice from an expert.