2-way Gate Latch & how to install it!

We source and install a two-way self closing gate latch. A huge upgrade from a cheap standard latch and a simple way to fix a hard to open gate.
Gate Latch:
www.amazon.ca/Stanley-Nationa...
Impact Drill Socket Adapter:
www.amazon.ca/Pieces-Socket-A...

[@HorseLuvr101]

That back mount to hold the gate open is genius!

[@sepstei2]

Fabulous video!! With your assistance I installed the latch, and now have easy two way access. Many thanks.

[@donnadeutsch7125]

This is exactly what I need! I had a wooden fence put in around my property and all the latches are falling apart. I didn’t know any better. Going to call someone to put one of these in for me and check my fence come spring! Thank you!!!

[@MoAli72]

OMG, you had the same idea for your profile pic!

[@vikto07081980]

We ended up exchanging this model for the slimmer version kzbin.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.

[@GlenGummess]

Very well explained and shown. Especially liked how well-focused the close-ups were.

[@livl9455]

I live in the UK & we ordered this latch all the way from the US just because of you and this video! Thank you so much. It’s now installed and works like a dream.

[@jofalltrades1816]

That is great to hear!! I've been using ours almost daily for over a year and it still works flawlessly. Glad you like it!

[@ettin05162]

Nice using the old latch for something. Great idea. 👍🏻

[@jamessukup]

Very cool, Love the reuse of the old latch to hold the door open.

[@nauidiver227]

Genius!

[@rslsr56]

2nd latch great idea , inice fence you built, nice video, your the perfect neighbor!

[@pattygregory2427]

Great video, didn’t know those latches existed!

[@stanleysantorelli6858]

I so needed to know this! thanks for taking the time to post this useful video!

[@jleyd]

Just the latch I’ve been looking for. Now to see if I can get it in the UK. Cheers.

[@isidorogarcia4803]

Thank you for sharing. Very good detailed video.

[@StephNW]

Great video!! exactly what I was looking for!!

[@lilisanchez2605]

Thank you for the video, well explained. Great idea about reusing the old latch!

[@jofalltrades1816]

Much appreciated, honestly, I make use of that old latch every day. Helps save the gate on windy days too!

[@homermunoz5069]

Thanks so much for this great video.

[@christyrostek8781]

Thanks-these are super helpful

[@alextran7967]

Wonderful video! Great job

[@jofalltrades1816]

Glad you liked it, thank you!

[@jenniferhunt8069]

Great demonstration, thank you!

[@jofalltrades1816]

Glad you enjoyed it!

[@kylerodgers2045]

great video man. Thank you

[@kaylecarlile6708]

Nice fence! Can you do a video showing how you built it? Which fasteners? Board sizes? Where you fastened each board? Dimensions? Type of wood used etc? Thanks

[@leecuen6379]

Thats a great idea. I have the same problem with my back gate and I have been looking for ways to attach a better latch ( using a metal wire thats runs over the top of the gate) it's useless and my dog has gotten out several times due to poor latch installed. I also want to attach a gate spring closure device but with the gate being uneven like your I havent found a usable spring. If I add a block of wood like you did to even it out thats should work. Thans very much, very helpful.

[@AztecWarrior69]

5:59 Nice and solid he says. 6:10 the thing slides up and down LOL "Solid" “You keep using that word. I do not think it means what you think it means.” -Inigo Montoya, The Princess Bride.

[@jimmartell9703]

Thanks this helps us a lot. very competent.

[@jofalltrades1816]

Glad it was helpful!

[@johnhurley3173]

Love you video!!!! Can i use this latch on 2 door gate with both doors swinging inward? Thank you

[@grahamlinney4186]

Good job, and a good latch. But with a chunky midrail around the fence, I wondered why - instead of a random thickening block on the gate style - that midrail was not continued across the gate. It would be aesthetically more pleasing than adding a random block to mount the latch. It would have looked less like an afterthought....Function and form' is harmony!

[@KeithSprague-re8xn]

Thank you very man!

[@realglz]

Brilliant

[@aimeechung3305]

Thanks for your vid. Is there such a th ing as a lockable 2 way latch??

[@brianhamilton9943]

Very nice, I have 2 gates one left and one right swinging do I need to buy a left and right latch or is this reversible? Could you also please share the link to the actual latch you installed if I want to purchase it thank you.

[@TheAllieAndEmmaShow]

I installed this latch two days ago. Please note the packaging does NOT include installation directions. The "handle" part of the latch can be installed 2 different ways. Be sure it's in the direction you want before you tighten the lag screws.

[@olenaerhardt7725]

Is there a typical distance between the gate and the fence part for the latch to be installed correctly? The is a small notch on the latch seems for the purpose to stop the gate (not to go inside), but to use the notch the slit between the gate and the fence should be very small. I'm afraid if the wood will get wet in rain it will spread and the gate door is too tight against the fence part. Thank you for a great film.

[@jofalltrades1816]

Thanks for the comment. The latch itself is very thin, about 1/4" or 6mm thick with the 2 pieces together, so the gap between the gate and the post can be quite small and it will still fit. If the gate posts did shift around it could certainly bind the gate when opening and closing. My gap between the gate and the post is 3/4" (19mm) and it might go down to 1/2" (13mm) when it moves. The gate is tighter to the hinge side to allow room for the latch. If the gap were to get wider, you can adjust the strike on the back that goes into the latch to compensate for this. Hope I understood you correctly.

[@olenaerhardt7725]

@@jofalltrades1816 I see, thank you. My gap on this gate was about 3/8" or 10 mm. I installed the latch though, hopefully it won't be too tight after rain. Probably the purpose of that notch on the latch is different that I thought it is for. It will be less guessing for the 2nd gate I need to do after your explanations. Thank you again.

[@Kim-nn2eu]

J of A, how long are the lag screws that mount the plate against the post? Need to know how thick a piece to use...against a brick wall for closing. thanks.

[@jofalltrades1816]

The lags that come with the latch are 2" long.

[@Kim-nn2eu]

@@jofalltrades1816 Thanks for that answer so quickly; helps a lot!

[@jasonlara]

Really good video. I would love to do this, but my gate is metal. I can't find anything that would work for me. Any ideas?

[@jofalltrades1816]

Thanks, much appreciated! If it is a chain link gate, they do make something called a 'Butterfly gate latch. Seems to work from both sides and latch automatically. www.amazon.com/Chain-Link-Fence-Butterfly-Latch/dp/B08FRM2LZ7/ref=sr_1_9?crid=3M0IHHGGNJZRM&dchild=1&keywords=butterfly+gate+latch+chain+link&qid=1621453921&sprefix=buterfly+gate+latch%2Caps%2C197&sr=8-9

[@jasonlara]

@@jofalltrades1816 Thanks. But my gate/doors are "French door" style. Both doors can open, like if you want a larger opening to let an RV through. They are solid metal with only a quarter-inch space between the doors when they're shut. It has a simple latch that works...but you can't open it from the outside because you can't reach through the door. Really dumb design I guess. Thanks for the reply.

[@jofalltrades1816]

Sounds solid and secure. Another idea is a locking latch that I've seen work on double doors, but would involve drilling a hole through one of the gates and they would have to open outward. Good luck! www.amazon.ca/QANVEE-Latch-T-Handle-Storage-Hardware/dp/B088TPD4V5

[@jasonlara]

@@jofalltrades1816 Now this looks like it might work! The doors swing both ways. Thanks so much!

[@AztecWarrior69]

4:14 if you are worried about getting that drilled properly the don't use that sort of bit. You use a brad point drill bit.

[@I_am_Fake_Fake]

I installed a latch gate of my own it is to go through to my neighbors house lol

[@paulahamilton7290]

Does ur wife know? 😂😂😂

[@mplsjeffm]

your video was very informative, but also very very difficult to hear. Suggest, perhaps get wireless microphone for around your neck or some way to sheild microphone from the wind. 6:30

[@AlphanPeter]

we get really strong wind will latch keep the gate closed

[@jofalltrades1816]

Yes, it should. We get some strong wind too, 90km/hr and so far no issue with the latch

[@jamespolucha6911]

Where can you buy this ?

[@jofalltrades1816]

It is available at most Lowes stores in the US, Also found on Amazon.com and .ca

[@pyriedog]

I'd be worried about the top latch poking my eye out

[@JamesJones-mg2qp]

How do you lock a latch like that from intruders

[@jofalltrades1816]

The back side of the latch has holes that line up for a padlock. Not ideal but it makes it secure and more difficult to break into.

[@xxx_rude_dogg_xxx9806]

genius re purposing on the old latch lol

[@paulmadeya5396]

Can you add a lock to this?

[@jofalltrades1816]

There is a provision on the inside for a padlock yes

[@paulmadeya5396]

@@jofalltrades1816 Is it possible to have a key? It seems like the padlock would make it a bit inconvenient

[@jofalltrades1816]

@@paulmadeya5396 there are locking T handles out there that have lock cylinders in them but they are designed more for shed doors than gates. Most of them are one way only. There is also a newer style gate latch with a keyed lock, again one side only.

[@obcottawabraclinic2743]

How would I lock it?

[@jofalltrades1816]

Where the strike meets the latch, there is a hole for a padlock. This would prevent the lever from moving up and down.

[@saintsfan342000]

@@jofalltrades1816 I've been trying hard to find a latch as reliable as this that can be locked and unlocked from both sides. No such product currently exists, it seems. All the two-way locks out there are crappy latches.

[@tamilastro7849]

Your voice is so soothing brother. If you hit the gym you d be loved by more women 😍

[@bridgettel8217]

I think he looks good the way he is.

[@tmuxor]

Sounds like you want to love him, Tamil.

[@roseannlevin5615]

Wow, I thought just women got remarks like this. Nobody deserves it.

[@user-gp1qt4zm6z]

Could not hear

[@timo4040]

ads ads ads....

[@salram8396]

Bro Please stop talking And get the job done ‼️