The Best Scroll Saw Blades (and How to Choose Them)

How to Become a Pro Scroller: Part 2
Welcome to the second installment of my three-part series on becoming a pro scroller! In this video, I'll focus on one of the most critical aspects of scrollwork-choosing the right blade. The blade you pick can make or break your project, literally transforming it from a masterpiece into a mess. I'll cover everything you need to know, from blade types and sizing to the best brands and how to properly tension your blade to minimize breakage and mistakes. By the end of this video, you'll be equipped to make precision cuts with confidence! Thanks for tuning in! Don't forget to subscribe for Part 3, where we'll dive into more advanced scroller techiques and projects you can do!
Helpful Videos:
Part 1: Picking the Right Scroll Saw - • The Best Scroll Saw: A...
Starting Your Own Woodworking Business - • Start Your Own Woodwor...
A few important notes:
When I mention that "teeth face down," that's because primary teeth should always face down when cutting. However, for standard blades, it's more accurate to say that all teeth face the same direction.
Regarding blade tension: While every scroll saw may have different tension settings, all blades should ultimately be tensioned to the same "High C" note for optimal performance.
Music Credit: www.epidemicsound.com

[@danielbohannon302]

I use a lot of shark tooth blades in a lot of blades from would bear and flying Dutchman they're all good blades

[@theimaginationwoodshop]

Truly appreciate the comment and your input. Agreed - that many places outside of the big box stores can give you a quality product. I speak to what I know, and I've never had an issue with Flying Dutchman. Thanks for wathcing!

[@wademackey1098]

Thanks for the video. Helped me pick what blade I needed.

[@theimaginationwoodshop]

That's great! I'm happy this video could help you, and if you have other questions, don't hesitate to ask. Thanks for watching!

[@billyjay4672]

Can you use any blade for your DeWalt ?

[@theimaginationwoodshop]

@billyjay4672 Yes, you can use any pinless blade is fine. I have a whole video on blade recommendations, so I highly recommend giving that a watch. The series is a three parter in total.

[@margaretkersey9985]

Just setting up my scroll saw . What type blade should I use on deer antler? Thanks!

[@theimaginationwoodshop]

Awesome question! So, I've only cut antlers a few times because the smell is terrible. Based on that very limited experience- I would imagine a standard skip tooth blade could work fine, but I'm also not sure since bone is so much denser and harder than many woods. I know scrolled antlers are beautiful, but I just don't feel I have enough experience with cutting bone to give you quality advice. Sorry about that.

[@jaimegenovajr3257]

Just pulled the trigger getting DW788 tomorrow delivery from HD 😊

[@theimaginationwoodshop]

Very exciting!!! I know you'll love it! What blades are you going with?

[@jaimegenovajr3257]

@ I ordered from bearwoods will arrive next week

[@ProductiveSam]

would you have any advice on using scroll saws with metal like copper and brass?

[@theimaginationwoodshop]

That's is a great question. I don't think you'll have an issue cutting softer metals such as brass, copper, and aluminum. Flying Dutchman has a few different metal specific blades such as the iron man. The big issue is heat buildup, so I like using the T-9 lubricant spray on the blade and/or the cut periodically and take breaks to ensure my metal doesn't heat too much if I'm making a big cut. Having said all of that- full disclosure, metal is not my expertise, so that is my approach that seems to work if and when I need to cut a piece of metal. Hope this helps and thanks for watching!

[@ProductiveSam]

@@theimaginationwoodshop It does help, I am a metal worker and got my hands on a Ferm scroll saw for 25 quid. I never kept in mind that my blades might have been snapping due to heat build up. Its a good call to keep an eye on. Thanks

[@curbshooter]

Can you do a video on maintaining the dealt scroll saw

[@theimaginationwoodshop]

Maintanence should be realtively low for this machine. The most important thing is rust prevention honestly depending on your climate. I use Boeshield T-9 Rust & Corrosion spray. Stuff is fantastic and is way better than WD-40. WD-40 will work in a pinch, but the T-9 is a better product because it doesn't attract dirt like WD-40 does. Other than that, I honestly do little to no matainance on the machine. There are little brushes in the rear underneath the motor that occasionally needs replaced, but honestly if your motor goes out or something like that - you are just better taking it into a service station that services that brand. I like the idea, but sadly, I just don't know if I could fill a video with the little bit I do which I guess is kind of a good thing. Hope that T-9 suggestion helps, and thanks for watching!