THE BEST setup for your HB Racing D819rs

A rundown of the setup on my D819rs #HBRacing #nitrobeastmode #jconcepts #thevoicercpodcast #rcfun
FYI, I left out a few things in the video:
front knuckles are stock 2deg kpi
rear camber=2deg
front camber= 1deg
link to setup sheet:
/ 722273571814507

[@andreashaussinger7463]

Hey Hammer, i normally dont comment on YT, but for this i have to. I struggled a lot with my HB Setup, it was just to twitchy and aggressive, and the rear end was loose, i had no fun driving it... BUT with this setup from you, i can drive like a pro my laptimes improved like 5 Seconds and i now have a LOT of fun driving this car, thank you so so much for this 😊 Greetings from Germany my friend

[@TheHammer]

Awesome! It really is a good setup. Glad you like it!

[@martinjagger5362]

Just Subscribed to your channel Danny 🤙👍👊🤟 awesome vids !as I want to return to Nitro 1/8 ....I was looking at Serpent cars but HB 🤙 or MUGEN I'm thinking cheers 👍🤙👍💯

[@RcOffroad9513]

Great video! 👍

[@Lawnsbyjason]

Man love the bump box with the heat heater plug!! Can you do a video on the bump box setup? Would love to see it

[@TheHammer]

I did one a while back:kzbin.info/www/bejne/b5q9iHecp7V7d5Y

[@terranceavery9308]

Instablaster.

[@nebaartur]

Thanks to great unselfish video. Can we get this setup on paper form. Thx.

[@TheHammer]

I will try to get a setup sheet filled out today.

[@keithbates8482]

Definitely need it on paper brother

[@Crawlerworkz2023]

Hammer 🔨 time🤙

[@flaviorodrigues9168]

Thx for the video

[@christopherosborne1424]

Question Hammer.....I have had my rear drive shaft pop out of the diff cup a few times randomly (especially on a hard crash lol)and was wondering if you had ever experienced that before...I am pretty much running your setup etc. with a touches of my own but i have to say setup is awesome so thanks for all the videos keep it up really enjoy them.

[@TheHammer]

Thanks for the kind words. I've never had a driveshaft pop out and I've had some terrible crashes. However, a close friend did, but I think his was bent before it happened.

[@christopherosborne1424]

okay thanks for reply...it happened once thought it was diff cup changed it plus rear arm for the next race never happened again...this weekend it popped out again so need to really see whats going on.....thanks again from Bermuda!!! where you have a strong following of most of the 25 club drivers that race here. Team HB Racing dominates the podium most race days lol!!

[@christopherosborne1424]

not to go back to this but a fellow racer who was having same issue found some 93mm (part# 204446) rear outdrives do you run those? or the stock lengths that come with kit at 91.5mm?.....having the 93mm outdrives seems to me on paper that should fix my problem any thoughts

[@TheHammer]

@@christopherosborne1424 sorry. I thought you were referring to the rear center shaft. I do run the 93mm rear shafts, but have only been doing it since last year's black Friday sale. I ran the stock ones for a long time and still run them on my ebuggy. I have never had one pop out. Maybe I have been lucky.

[@christopherosborne1424]

thanks Hammer

[@Kulukcing]

Nice set up..mau i know where you bought the mud guard for 819rs ?

[@TheHammer]

Those are DE Racing guards for the older 812 I think. It takes a little bit of dremel work, but they work great!

[@brandonreed5634]

Danny, I just bought a complete E819RS setup from someone last night. Do you feel like this stuff you talked about in this video would work good outdoors also at like RC3?

[@TheHammer]

Yes. For sure. I've got an E819rs setup video on my page as well.

[@TheHammer]

Link to setup sheet is now in the description

[@alexanderfreixas]

Where can I get the LV WRAP FOR MY WING AND THE RAIDO

[@TheHammer]

Bi polar designs.

[@rokstaz]

not sure if you mentioned your clutch setup and whether you use any brass, we have tried the brass hubs which have been effective if needing a bit more traction.

[@TheHammer]

I use the stock clutch setup. Haven't tried adding weight yet.

[@rokstaz]

@@TheHammer I have tried the reds 4 shoe but actually ended up going back to the standard kit 3 shoe. WE used the brass hubs at the HB race in France back in 2019, which really helped as the track had varied traction. Interesting you've gone for the option internal gears, as not considered that, it might suit the US style tracks more than our EU style tracks. Thanks for sharing your setup and insights, good luck with the racing

[@rokstaz]

this was the track to give it context kzbin.info/www/bejne/g4LGmINvp7tpr9k

[@samsoncrabtree8336]

Can you share the setup sheet in the comments? And also, would this setup transfer to an E819RS by chance?

[@TheHammer]

I can. It may take a little time, but I'll get it in there. Yes. I run pretty much the same setup on my e819rs, but with bladders in the shocks.

[@antonioasc.5852]

Hello, what battery do you use for engine heater?

[@TheHammer]

Protek 2200 3s

[@j.walker3498]

Next time you get a new chassis, go around to cabinet shops and or countertop companies. Get some scrap plastic laminate. Glue it to bottom take off rear anchor skid plate.

[@mattg2596]

Then what when u need to undo screws ? Someone should make a chassis protector with all screw holes there as well .

[@j.walker3498]

@@mattg2596 Yes a countersink bit would be involved. I assumed people would know that.

[@TheHammer]

Link to the setup sheet is now in the description.

[@roddystigsson7901]

Hey! with 2dot over on A-block and B-block 5dot / 2.8mm, then it will only be 7.2 degrees kick-up. how does it work on bumpy tracks? have never tried it myself but became curious :-)

[@TheHammer]

My car works great on bumpy track with this setup, but keep in mind this is also with the 20deg caster blocks, which will help with that.

[@roddystigsson7901]

Will try when the winter is over in Sweden. drove a lot with 20gr casterblock yourself, do you use 2gr steering hub? there is also 0gr 4gr as well, heard rumor that there is also 6gr

[@TheHammer]

@@roddystigsson7901 yes. I use the 2 deg.

[@lenstage3982]

Can you add this to so dialed

[@TheHammer]

I thought it was already on there. I just changed it to public.

[@petrpetr9835]

👍👍👍

[@brycepeart5732]

Do you have a part number for the 5x1.05 and 5x1.06 pistons ? Thanks

[@TheHammer]

I drill out the ones that come with the kit.

[@brycepeart5732]

@@TheHammer do you know the size of the drill bit needed? Thank you for your quick response!

[@TheHammer]

@@brycepeart5732 you just drill them 1.5mm and 1.6mm. If I remember correctly, it comes with 5 x 1.5 and you just drill a pair to 1.6.

[@TheHammer]

Look up avid piston drill set. It's got 1.1-2.0 piston specific drill bits.

[@brycepeart5732]

@@TheHammer cool will do thank you!

[@johnbauer3978]

Would you feel that this setup, for the most part, would transfer to E819rs? Thanks

[@TheHammer]

Yes. I run the exact same thing on my ebuggy, but I use the Performa honeycomb bladders in the shocks and I run two shorty packs in the rearmost position.

[@johnbauer3978]

@@TheHammer Thanks man! I too run the performa honeycomb bladders and like them better than emulsion. We race in the evening, and my car gets looser as it gets darker and the dew comes out. The track feels greasy. I'm searching for more rear grip at night and am afraid of how little rear toe your setup has!!! Open to suggestions. Thanks so much.

[@TheHammer]

This setup has tons of grip.