The BEST Slider in 2019 - Edelkrone SliderPLUS with HeadONE

[@MaksimYuryev]

Check out these Edelkrone products using these links below ↓ Seriously impressive gear! SliderPLUS Long: edel.kr/me Slide Module: edel.kr/me HeadONE: edel.kr/mg Tilt Kit: edel.kr/mg

[@Ben-fq1lj]

Question, could I fit a bmpcc6k on the tilt kit? Looks small for the space on the side.

[@edelkrone.official]

Hi@@Ben-fq1ljBen, since it's a wide body camera, we recommend HeadPLUS with it instead of Tilt Kit. You may learn more about HeadPLUS at edel.kr/qT or contact us via edel.kr/spprt. Our best, Asude

[@shelekhov]

your real reviews and comparisons are way better... If no prices discussed, right away a sell add.

[@BerlsMcSquirrels]

Even with the current sale running, this kit with the focus module still comes out to $2,995.80 US, insanely expensive! Yes, I'd love to have this as well, but it costs more than the camera and lens you're using to film this video. Love your content, but I think this should have been pointed out as a major drawback to this system.

[@Silverpinstudios]

Believe it or not , Edelkrone is cheaper than some of the higher end systems like Kessler Crane. I've researched this to death and I still keep coming back to Edelkrone. The odd thing though is that none of the industry reviews of top ten sliders do not include Edelkrone as an option. I still think Edelkrone is the most versatile and comprehensive system out there. Add in the app used to control the motorized system seals the deal for me

[@MattiasEliasson74]

@@Silverpinstudios Lots of problems with the edelkrone. It drops connection, you gotta cut power, and sync it again. The motor is noisy.

[@Silverpinstudios]

Actually I purchased the slider Pro with the slider plus and the slide module. The app instantly connects every single time. I found that if it gives you an error it’s because the belt needs to be tightened slightly. Also you have to make sure your batteries are charged before programming. Good luck!

[@MattiasEliasson74]

@@Silverpinstudios Good to hear that you are happy with it!

[@cbflazaro]

every sponsored review with affiliate links : "This is amazing" Every review from actual people that bought it with cash: "Jitters, shakes, fails, doesnt work without internet connection if theres updates, cant tilt , struggles vertically, noisy , etc"

[@AnimeZone247]

Everybody gonna experience something different. Why does a good review seem fake but a bad review seem real. The only real way to see if u like somethin is if u try it out urself

[@sebbo85]

@Bruno so true!

[@CorneliusCreations]

Fantastic video bro. The B-roll shots are absolutely amazing!

[@AsianWithHat]

I own an Edelkrone slider set and I have seldomly used my slider kit. I like using my Ronin S for the run and gun style. Maybe it's because I do documentary/interview style setups once a month.

[@MaksimYuryev]

I definitely use both a lot depending on the shoot.

[@AsianWithHat]

@@MaksimYuryev I need to go try out the timelapse setup and see how it is.

[@ChadMadden]

I just got this in the mail. How do you attach the headone to the slider? The 3/8th screw doesn't fit the 1/4 on the headone but this video clearly shows it together.

[@igor_aka_insane]

funny that nobody Igor Shparaga answering this question

[@meshstore_technologies]

Максимка и Edelkrone снимал! Молодец!

[@jakefelzien]

these are by far the coolest sliders ever... a single youtube shooters dream... * drooling *

[@hidetakejapan]

I'm using SliderONE V2 and two HeadONE. It is a pretty good system, but one issue. It can not move pan, tilt, and slider same time. However, I still want to buy SlidrPLUS.

[@MaksimYuryev]

What app are you using? I show it doing all of those at the same time in the video.

[@hidetakejapan]

@@MaksimYuryev Hi Max. I'm using the same app. I mean if I save motion pose1 edge of left. pose2 "slider left to right with tilt up and down with pan (look like zigzag. up, down, up, down)" until end of the slider. However, when I replay the pose2, just the slider and headone move to the left to right, tilt down and pan. I guess headplus can do... One more thing it's can't control each speed. I want to fast just slider, and I don't wanna fast tilt and pan, but it can't. However, this product is still good.

[@fsb5370]

@@hidetakejapan you have to tap all three for that move but the sequence update helps with that too on the app

[@KobusGevelspar]

I guess you didn't use the motorised plus for the sliding shots in this video? Sorry to say, but I see bumps and not too stable footage. other than that your image quality and lighting has improved a lot.

[@PARADIGMSHIFTOFFICIAL]

Hello there, Can I ask what tripod are you using in this video? I can see that is a Benro, are you able to tell me which model that can support the weight of the slider? Thanks in advance!

[@pep98]

Great video. What you forgot to tell is that Edelkrone dont provide a cable from the slider one to your mobile. And that makes it impossible to make slomotions or timelapses.

[@jameshiggins26]

Great video. Will you be checking out the Panasonic S1H? Would love to see a review on that.

[@MaksimYuryev]

Yes I am hoping to get my hands on one to review :)

[@jwong7316]

What's the difference between two HeadOne with Pan/Tilt kit vs the HeadPlus besides the big price difference?

[@ParanormalPulse411]

For a second I contemplated not watching because I have been wanting this and don't need more reasons to spend extra money. lol

[@MaksimYuryev]

Haha. I’m glad you joined in!

[@Theaquaplex]

Question, how do you connect the Headone to the SliderPlus? I received mine today, but it looks like the both Headone have a smaller mounting port

[@igor_aka_insane]

Same problem

[@robertfeliciano5723]

How's the lean when going from one end to the other? I'm shooting retail store shelves and need the lines straight. I currently use a 4' slider with a tripod on each end.

[@cah88]

I have one of these and can’t use it for anything with sound because of the motor noise. Insanely loud.

[@gaboguerra950]

Nice! Do you know the payload ?

[@PolluxChung]

I am still using the iFootage Shark S1 slider. Works great. But the motor drive system(s) is/are so bloody expensive therefore I am only using that slider manually.

[@dariorotafoto9918]

Thank you for this precious video. I'm trying to decide what 3axis system to buy...did you ever used the MIOPS products?

[@far03005]

What Tripod Head is that? The Benro BV10?

[@fsb5370]

with length slider are you using? I wish edelkrone gave the option of wireless and Bluetooth. You may be somewhere where internet is hindered hence Bluetooth.

[@raphaelthiollier9767]

Hi. One little question, does the new slider has two mounting points? The old one has only one and this is un sufficient to use on a tripod with no risk. Thanks

[@markhaleston1607]

Nice work Max. The cost doesn't bother us. If it performs as you spoke about we are all for it. As early adopters in video equipment we have scratched, dented lost and destroyed cameras and gear. Not our intent ever, getting the shot sometimes costs a little more. Ordering the full kit this week.

[@tneighbors]

Thanks for another great review Max. So you prefer this setup to what Rhino has to offer? I just bought the Edelkrone slideOne with headOne, but it's a little noisy and it doesn't allow you to physically position the camera for each programmed position and you can't use it as a manual slider at all, so I'm thinking of swapping it out for this setup. I actually like that Rhino has a hard-wired remote, because it makes it so others can use it without having to have help syncing it with their phone, etc. and I don't really like the idea of relying on my phone & bluetooth to make things work. However, I love the compact design of this slider and if the bluetooth syncing has been reliable for you, maybe I'll go with this one. Thanks!

[@MattiasEliasson74]

The Rhino are so much better at everything. And its not nearly as noisy as edelkrone.

[@tonylorentzen]

Is the app a smartphone app only - or is there also a version for iPad or other tablets? Could be nice with a bigger screen for that many features and functions.

[@edelkrone.official]

Hi Tony, the app works on all iOS 11.0 or later & Android 5.0 or later devices including iPads and tablets. Best, Asude!

[@Nujola]

getting ready for a new slider waiting for the new rhino comparison

[@Antoni_Hjalmarsson]

could you mount a gimbal like the ronin sc to the slider? or would it become too heavy and unstable?

[@pascaldeshayes5459]

Thanks for this very good video. How do you manage focus in such a situation, though?

[@keithrushing9078]

Hey Max. My 1DX Mark II with lense weighs in at 5.7lbs. Will this unit handle the weight? Thanks

[@jankitanoff]

Great review! Thank you so much for your terrific content!

[@ShadesOfTech]

How much is all the complete assemble?

[@GaryTheGringo]

Great video Max! Have you had a chance to try the Slider One V2?

[@JoeHTX]

How much of an incline can you use the SliderPlus long model? Will it work vertically, or is it limited to just level movement?

[@JoeHTX]

@Jackrabbit Photo Thanks for the answer.

[@MattiasEliasson74]

Its very sensitive so you have to have it perfectly level and the tension set perfectly or it will give you an error.

[@FlashOnTwos]

Please tell me how noisy the motors are. Would this work in a quiet environment while doing interviews?

[@MattiasEliasson74]

No it will not. Its got a high pitch sound you get when you run it over 30%.

[@18wheeler170]

is it just me but its not looking to smoooooth to me please let me know if that is taking care of by now because my unit is do here tomorrow

[@SteveT__001]

Great review, will the app work with Android phones?

[@alexshdvideo]

Looks interesting. Too pricy for me right now, but I was aware of the company.. The Wing etc... sort of gateway product I might try. Non motorized sliders cost me too much time.. repeat.. too fast, too slow.. didn’t match the other shots.. I really would prefer a motorized system vs cheaper non motorized. I’ll have to look to see if you have a Edelkrone Wing.. though I doubt it can support my larger camera and lens combo.

[@theautomationchannel6920]

Is it supporting vertical movement?

[@DrErnieWard]

Fantastic as always? Q: What was the TelePrompter iPad holder at the very end?

[@MaksimYuryev]

Thanks! Here you go: www.bhphotovideo.com/c/product/1295547-REG/prompter_people_uf_12_ipadpro_ultraflex_12_ipad_pro.html

[@IMDABROWN]

I keep my iPhone 6+ just for things than need an app to operate.

[@dmn2273]

Yeah I got an old iPhone 6 Plus that I use for consuming KZbin videos lol

[@garfieldirwin]

Doesn't the JibONE make this kind of redundant?

[@tvlussoart5063]

I read the product description carefully. I want to buy the product according to your explanation. I want to upload a video of me drawing on the rail and take a video.

[@BaumfreundeTv]

Edelkrone ( The last e isn't silent! You pronounce it like the first E in Edelkrone)

[@JensEser]

Great review, very insightful!

[@FluFilmPro]

Hey man, review Moza Slypod...

[@Armn9999]

Lol one thing I realized is all these sponsored video reviewers say “I dropped it but it worked fine. That’s thanks to this special material they use” 🤣

[@YashG]

VEry nice Love you

[@lastfrontier]

Hey Max, I own an original slider from Edelkrone, but the motion controller is too loud for interview setups. Did they make this version quieter?

[@MattiasEliasson74]

They did not. Its unusable in interviews. The Rhino Arc II are much more quiet.

[@palojusrinivascharypssppp1603]

🙏🌹🇮🇳 PSSPPP 🇮🇳 PALOJU JAI SRIRAM 🇮🇳🌹🙏

[@indago1]

Rhino arc 2 is cheaper AND actually far more better in usability. Plus u can use it without app

[@vahidamini1863]

✌...

[@charlierick5828]

hey Max , did you read my email ? never got your reply

[@MaksimYuryev]

I get a ton of emails. What was your about?

[@charlierick5828]

@@MaksimYuryev ton of emails ~ really hot ~it's about the P1 RGB video light, sent it to you 4 mouth ago~ never found it in your video 😂

[@3rdisland477]

I was so sorry to buy this shit product, it looses the pre programed position during operations