The Best Truck Toolbox, Ladder rack and decked combined Set-up

  Рет қаралды 64,614

Anthony Crane

Anthony Crane

Күн бұрын

Пікірлер: 82
@jamesherbert7848
@jamesherbert7848 Ай бұрын
This is exactly what I need; thanks for making this video!
@babaksoltani6534
@babaksoltani6534 2 жыл бұрын
Hey Mate Your video gave me so many ideas what I can do my ute tray. Keep up the good work. 👍
@vicvidal8651
@vicvidal8651 2 жыл бұрын
Yup hands down the best combo I’ve ever seen.
@RussellCambell
@RussellCambell 2 жыл бұрын
Nice setup. I'd also like to see your trick loaded with tools and how you organize them.
@ZR1Terror
@ZR1Terror 4 ай бұрын
Love the setup.
@Brxrwn
@Brxrwn 4 жыл бұрын
Great video and the EXACT setup I'm after! Really look forward to your next video on exactly how you made your spacers to accommodate the drawers under the toolboxes. Thanks
@anthonylcrane
@anthonylcrane 3 жыл бұрын
I will post soon.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
I have posted the construction of this setup. Sorry for the delay. Here is the link. kzbin.info/www/bejne/a3WldaKlYp6hqJY
@filmthehunt3335
@filmthehunt3335 Жыл бұрын
You mentioned a 1 inch piece of PT are you just using a 1x a piece of 5/4 or did you rip down a 2x to get a 1 inch exact? I watched the other video but it just jumps to you drilling the hole and already have the board cut and painted.
@nicksala88
@nicksala88 2 жыл бұрын
Like the video and walkthrough. You should make a 1 year in video. Hows the drawer slides, Does it get tougher with weight and wear. And how the lock mechanism look? Hopefully a worthy locking system
@anthonylcrane
@anthonylcrane 2 жыл бұрын
Great idea! I need to show the truck how it is right now fully loaded because I literally can pull up to any job in the rental world and fix the problems with what I have in truck. I will try to do this in the next couple days.
@PuddinPop-rv8zt
@PuddinPop-rv8zt Жыл бұрын
This makes it even harder to decide the best setup. Been debating on an enclosed trailer set up (7'x12') or something like this. They cost the same and both have their upsides and downsides.
@andrewgilbreath1331
@andrewgilbreath1331 3 жыл бұрын
Man thanks for the video I love that set up I'm about to upfit a truck for hvac and appliance work that is almost exactly what I was thinking about doing the only thing I don't care for is your ladder rack I'm short and have a hard time reaching that high and I don't want to have to use a ladder to get a ladder haha
@adrianugalde5633
@adrianugalde5633 3 жыл бұрын
I have been looking for this for ever this is awesome great video. You need to link all them boxes in bio
@luisalcala8559
@luisalcala8559 Жыл бұрын
Amazing setup!!
@realworldcarpentryremodeli5868
@realworldcarpentryremodeli5868 3 жыл бұрын
It’s pretty awesome as far as pickup trucks go. I guess if you need to pick up plywood you can put it on the racks. I really like the security aspect of it.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Yes, you also can detach back bar easily and stand 4x8 sheets on end in the back as well.
@GarDog54
@GarDog54 Жыл бұрын
Looks good buddy I run the exact setup but I built my own deck system so the drawers are longer in taller.. nothing I can't do out of that truck
@isaiahhoffer9507
@isaiahhoffer9507 Жыл бұрын
Nice set up
@permanentledlighting
@permanentledlighting 3 жыл бұрын
Ladder rack is great. Tool boxes came damaged and pull out welds broke. The angle for boxes you have to put tools in boxes or tools fall when you open them. The shocks that half the door up last a couple years. When you need to replace them it's a 100 buck per side. Buy the rack but not the boxes
@Erchemayus
@Erchemayus Жыл бұрын
Nice setup 💪😎👍
@sirnicholas6626
@sirnicholas6626 2 жыл бұрын
Looking for something like this for my company truck. They don’t offer this setuo for my truck but it’s given a great base to go off of.
@olamide78
@olamide78 3 жыл бұрын
Nice. Now you just need a headache rack to protect that rear window from loads. 👍🏾
@anthonylcrane
@anthonylcrane 3 жыл бұрын
This is true I will need to look into that. Thanks for the suggestion.
@patrickdonohue3284
@patrickdonohue3284 3 жыл бұрын
What's the model number for the side boxes? Can't find the one like this with the slide out drawer anywhere.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
This is the contractor pack series at ladderacks.com. Let me know if you have any other questions.
@Buildingstuff123
@Buildingstuff123 2 жыл бұрын
Had this rack setup on my dodge I don't recommend it if you do heavy construction. Put 30 sticks of 3/8 bar and it about snapped the front of the rack off welded rack is better option for heavy loads. But everything else here is great.
@MCC_Concrete
@MCC_Concrete Жыл бұрын
Hey, that was a good video. I like the set up. I do concrete foundations and I am looking for a way to set up my Silverado 2500. Any suggestions would be a big help. Thank you.
@GarDog54
@GarDog54 Жыл бұрын
The main difference is mine doesn't have the two side drawers pull outs.. looks a little narrow can you get a sheet of plywood/ drywall in there?
@needmorediesel
@needmorediesel 9 ай бұрын
I would recommend a headache rack
@benschmolze1266
@benschmolze1266 Жыл бұрын
I have the basic rack and one side box. Like the rack a lot but hate the box. Awkward to open and then the handle crashes closed when it's open. Is it just me?
@chriscolameco6850
@chriscolameco6850 Жыл бұрын
How do you keep hand tools that aren’t in your bucket organized?
@kw77827
@kw77827 Жыл бұрын
Anthony, how do you like the system one boxes now that youve had them this long? Have you had issues with build quality? How do you keep tools from falling out when you open the doors?
@filmthehunt3335
@filmthehunt3335 Жыл бұрын
You mentioned a 1 inch piece of PT are you just using a 1x a piece of 5/4 or did you rip down a 2x to get a 1 inch exact? I watched the other video but it just jumps to you drilling the hole and already have the board cut and painted.
@gabinocruz6564
@gabinocruz6564 6 ай бұрын
Me gusta todo este sistema para mí pickup pero no. He visto aquí. En México y ha de estar muy caro
@chaser9363
@chaser9363 2 жыл бұрын
nice setup, just wondering how deep front to back and how tall are the topside boxes?🤔 thanks
@hummelover82
@hummelover82 3 жыл бұрын
Great set up.. couple questions what’s the distance between the boxes. And how are the dimensions of the stow away drawer. Depth and width
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Boxes are 38 inches apart. The stowaway drawers are almost 8’ x 8” x 6”. I currently have one that is full of every single screw nail and fastener that I need for any job. The other side I have levels, caulking guns, and every type of caulk and sealant needed for all jobs. I also have Drywall material to fix and patch walls.
@Lqx.MM2
@Lqx.MM2 3 жыл бұрын
Anthony, great video. Have you thought about covering the large open areas between the side tool boxes? My power miter box, table saw and air tanks need to bt secured from the rain and thieves. Looking for your reply. Thx Ted.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Thank you and yes I have thought about this but have not figured out the perfect solution yet. I am wanting to put some kind of retractable cover on top of boxes for exactly the tools you mentioned and the capability to retract and put large items in back when necessary. If you have any good suggestions I would like to hear them and if I discover a solution I will post.
@jwhall3
@jwhall3 3 жыл бұрын
Thanks for the video. How’s it working out so far?
@anthonylcrane
@anthonylcrane 3 жыл бұрын
System is working really well. I am able to put more tools than I thought. The first day I had it completed I had all my tools with me and a water heater went out. It was awesome that I was able to load things in the back of my pick up easily.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Here is how I created this setup. Link to video kzbin.info/www/bejne/a3WldaKlYp6hqJY
@stankrieger3598
@stankrieger3598 Жыл бұрын
System one!, comes from?
@nauidiver227
@nauidiver227 3 жыл бұрын
Might need a headache rack
@juanchavez5345
@juanchavez5345 3 жыл бұрын
How can I buy the side tool boxes and the rack
@anthonylcrane
@anthonylcrane 3 жыл бұрын
www.ladderrack.com
@recyclespinning9839
@recyclespinning9839 3 жыл бұрын
I have the best design. .. I aint gonna share,.. But really that is an awesome set up. I have ladder racks and mounted side tool boxes. Great to work out of, no jumping in and out of bed. I also made a slider . its just wheels mounted on fiberglass decking boards . Then a painted 4x8 plywood ...
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Thanks for sharing
@CozJesusSaidICan
@CozJesusSaidICan 2 жыл бұрын
Where do you buy this system? Will it fit tacoma?
@minnieshryock282
@minnieshryock282 3 жыл бұрын
Hello Anthony my name is Bruce I drive an v10 with the latter rack different tool boxes but same latter rack but my problem is my height have any idea what could be easier for me I love the truck so no can't sell for something smaller tired of haven a stool around
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Sorry just reading. Which height are you talking about is a problem?
@g2thefb00bis9
@g2thefb00bis9 2 жыл бұрын
Hey mate where did you buy this tool box from ?
@worldwidewes8411
@worldwidewes8411 2 жыл бұрын
Love it
@daniellozana9953
@daniellozana9953 3 жыл бұрын
Oh sorry one more question. Would you be able to use the stowaway system without the ladder rack? Because I’m noticing that you have the back of the side boxes being supported from the ladder rack.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Yes, I believe you can set that up without the ladder racks. You just have to put a leg going down to the bed so that the box is supported. If you’re going to use it with Decked you will probably have to customize your leg and set it on the decked system to be supported properly in the back of truck. I hope this helps and let me know if you have any other questions.
@nauidiver227
@nauidiver227 Жыл бұрын
System ones tool boxes are too small for what I've got. Need squared off tool boxes 18" deep
@jamesconneely7084
@jamesconneely7084 3 жыл бұрын
hey - i have the very same set up on my truck minus the 38 " box. I added a bedslide that sits directly on top of the decked storage. Did you ever figure out a way to add any type of retractable cover?
@anthonylcrane
@anthonylcrane 3 жыл бұрын
I have thick vinyl cover that I am installing button on the boxes and it will waterproof the back give me a covered section while still having ability to open boxes.
@jimewelsh
@jimewelsh 2 жыл бұрын
The box would be a lot more practical I think... You couldn't really throw anything like Milwaukee pack out or DeWalt tough system
@chriscolameco6850
@chriscolameco6850 Жыл бұрын
He’s a landlord/investor it’s WAY different. Needs access to a lot of different tools at all time but doesn’t bring the same heavy load in and out of a ton of job sites.
@Daltoncom
@Daltoncom 3 жыл бұрын
That Ironton box you have behind the Decked unit, how well does water stay out of it?
@anthonylcrane
@anthonylcrane 3 жыл бұрын
I have had no water issues so far.
@cameronkreutzer9581
@cameronkreutzer9581 3 жыл бұрын
How wide is in between the boxes, wondering if theres still 4 feet for sheets of plywood or drywall. Im looking to get something very similar.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Between the boxes in the bed it is 38 inches. This does not allow for you to lay them flat. You can remove the back bar on ladder rack and easily slide sheets in at an angle. Also you can put them on top of the ladder rack and use the straps. I hope this helps and let me know if you have any other questions. Also I have posted the video on how to construct this setup. Here is the link: kzbin.info/www/bejne/a3WldaKlYp6hqJY
@darrincoy9361
@darrincoy9361 2 жыл бұрын
This nice but not sure if it’s worth 6K
@FranciscoMartinez-zv2rw
@FranciscoMartinez-zv2rw 3 жыл бұрын
How do you check your blind spot
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Same as driving a van, you need to use mirrors.
@certifiedpartsbreaker
@certifiedpartsbreaker 3 жыл бұрын
Where’s the second video?
@anthonylcrane
@anthonylcrane 3 жыл бұрын
I just posted the construction of the toolbox setup. Sorry of the delay. kzbin.info/www/bejne/a3WldaKlYp6hqJY
@irishsavage8715
@irishsavage8715 3 жыл бұрын
This only works if you don’t need to tow a gooseneck trailer, I bought decked because it comes out easy, I bought a Thule ladder rack because it removes easy.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
This is true, not the best setup if you are going to use a gooseneck trailer.
@nauidiver227
@nauidiver227 11 ай бұрын
Your setup is nice but I think I've got a better setup for what I do. Windows and doors. Feel like I'd have to write an essay to explain the set up. Should just make a video
@phongpham424
@phongpham424 3 жыл бұрын
where did you purchase the deck?
@anthonylcrane
@anthonylcrane 3 жыл бұрын
decked.com the link is in the information about video
@on9676
@on9676 3 жыл бұрын
👍👍👍👍
@painthammer6150
@painthammer6150 3 жыл бұрын
38" in box = fail for real tradesmen.
@anthonylcrane
@anthonylcrane 3 жыл бұрын
Kind of true, but it’s just an additional spot to fill the void and store tools. You could put larger and lose bed space.
@youngjohn5076
@youngjohn5076 3 жыл бұрын
That tool box set up cost more than the truck .
@anthonylcrane
@anthonylcrane 3 жыл бұрын
The truck is a duramax diesel lbz motor 2006, so not quite. You should price that truck and you will be surprised. It is one of the best Chevy trucks ever built.
@texasproud3332
@texasproud3332 Жыл бұрын
Looks a bit cheap looking
Contractor Truck Drawers and Shelving Set Up
16:45
Jason Daniel
Рет қаралды 390 М.
DIY Truck Cargo Ladder Rack Build
14:18
metaspencer
Рет қаралды 77 М.
When u fight over the armrest
00:41
Adam W
Рет қаралды 27 МЛН
Can You Find Hulk's True Love? Real vs Fake Girlfriend Challenge | Roblox 3D
00:24
Walking on LEGO Be Like... #shorts #mingweirocks
00:41
mingweirocks
Рет қаралды 7 МЛН
Watch This Before Buying Decked Truck Tool Box
6:22
Pro Tool Reviews
Рет қаралды 31 М.
INVENTIONS FOR A PICKUP TRUCK THAT YOU SHOULD KNOW ABOUT
15:01
TechZone
Рет қаралды 1,6 МЛН
2015 GMC 2500 Crew Cab with Custom Rack and Boxes
2:09
vacavalleytruck
Рет қаралды 31 М.
Highway Products | Pickup Packs™
7:17
HighwayProducts
Рет қаралды 745 М.
Why would you buy a Snap-On tool box!?
13:34
Bent Motorsports Offroad
Рет қаралды 329 М.
Finding the ideal vehicle for construction is HARD!! Here is what we have learned!
23:08
When u fight over the armrest
00:41
Adam W
Рет қаралды 27 МЛН