The Best Video Tripod for Under $500 | TERIS TCE CF

[@rafaelporto3947]

I bought this tripod because of this video and I am very satisfied. Thank you!

[@ScottDumas]

Glad to hear it! Thanks for watching!

[@RyanAudencial]

Been using Manfrotto my whole life, and I noticed after a year of use, they start to give up. Thank you for this video Scott, this is an eye opener 😌

[@ramonrodriguez6833]

I just bought the sirui sh25 video tripod kit. They didn't have that brand at the camera store here in TX

[@ScottDumas]

Should be a good choice as well, enjoy it! :)

[@joentell]

The E-Image GA752 legs are a steal at $199. They have a single stage lock like the Sachtler Flowtech. That feature is a must for me. I paired it with a Benro S7 which I got for under $150 and a cheap ball-head adapter. For under $400, I think it's a great setup. I compared it to my friend's Flowtech + Manfrotto 504HD combo and I didn't feel like I was missing out at all. Those Teris heads look like a great deal though. I bet between a similarly priced Benro or Manfrotto, the Teris looks like it has more features and a higher weight capacity.

[@MAMAvsGOD]

Those legs seems to be a Winner but that S7 head seems to be problem. Gonna go with Legs those E-Image legs just unsure on Head sighz.

[@MAMAvsGOD]

Scott Dumas what do you think about these legs on E-image combo??

[@joentell]

@@MAMAvsGOD I wouldn't say the S7 is a problem... especially when we're talking $150. I had my expectations set accordingly.

[@MAMAvsGOD]

@@joentell you think the S7 head is better then gh05 gear head that comes with Legs???

[@ScottDumas]

The GA752 legs look nice- I like the Teris TS-N6Q legs for the same single lock reason. The Flowtech with the locks at the top are still the easiest but I just can't justify the cost and when raising it really high having the locks at the top can actually be kind of awkward. I'll probably switch the legs from the TCE and the legs on the TS-N6Q to be honest since the TCE will be my on-the-go tripod while the TS-N6 has stayed in my studio most of the time, doesn't need much height adjustment. As for the head- I agree with what Joe said... he adjusted his expectations accordingly for a $150 head, but from my experience with the S7 it's nowhere near something like the TCE (or of course the TS-N6). I've never used the GH05 but it looks decent. Still, for just a bit more I'd personally recommend getting the cheaper aluminum version of the TCE and then swapping out the legs for the E-Image or something else if you really want to. Not sure if the Teris head would be available for purchase by itself without the legs... I'll have to ask.

[@paulcoleman52]

is there a newer version of this? I can't find it for sale anywhere.

[@lucrativestance]

Thanks for this video! I’ve been doing so much research on tripods and this video definitely helped me decide

[@CraigMarshall_HDvideo4K]

I bought the Teris TS-N6 head last year and mated is to a set of carbon fibre RT80C sticks from INNOREL. My ENG rigged Sony FS5 weighs in at 7KG so I use maximum resistance all the time but it has served me well and would highly recommend it. I have an FS7 too and it runs as light as possible so I will look closely at the Teris TCE-CF

[@joentell]

New studio setup looks clean!

[@ScottDumas]

Thanks! I actually have switched it up a bit and I'm trying out a simple seamless paper background setup now. Love having more space than before though :)

[@savillecreations8046]

Hi Scott. Thanks for the review. Are you still happy with it or recommend something else two years later? Thanks.

[@Ko6pa]

It is now twice the price, $600+..(

[@koni-video]

If you use the adapter for the Manfrotto plate, then the camera will be mounted 2-3 centimeters higher. This means that the lever will increase and the head will no longer withstand 7 kg of load, but less. Miliboo tripod review - it costs half the price and is very high quality.

[@PaoloMugnaini]

I am looking for the 120 CF one, do you know where I can find it?

[@ZteveLine]

Hi! Link in desc only takes me to the search page of amazon uk, do you think it's out of stock? Thanks for the great review!

[@ScottDumas]

Hi! That's very possible... let me check with Teris and I'll see if they have any more info.

[@ZteveLine]

@@ScottDumas Thanks!

[@ScottDumas]

So I guess they don’t currently have a distributor in the UK, but if you email [e-mail] he should be able to help you out.

[@ZteveLine]

@@ScottDumas Oh okay, I live in sweden so I figured amazon uk would be the best place to buy from, plan on buying a memory card from there anyway.. Thanks for the help!

[@A2KMedia]

great video! do you still use this tripod?

[@ScottDumas]

I do! It's been solid :)

[@A2KMedia]

@@ScottDumas awesome! picked it up, thanks!

[@FTGTapGod]

Thanks for the rec. Definitely going to check out their offerings. How are you feeling about that F6? I have an E2 and am thinking about picking up the F6 when it becomes available again.

[@ScottDumas]

Thanks for watching :) The F6 is incredible- I haven't tested it in any controlled way yet but shooting with the E2 and F6 on the same shoot I feel like the F6 had noticeably more usable DR and much nicer noise performance. Nothing like saying the E2 isn't enough, but I could feel the difference editing the two cameras which were side by side during an interview with fairly challenging lighting. I really like the new button layout and card slot on the opposite side too, small details but it makes the usability that much more pleasant. Feels like a really great balance of super high resolution/full frame sensor, but also higher frame rates when you sacrifice the crop. Just waiting on the drop in filter and maybe a cage at some point. Absolutely worth the money if it's in your budget :)

[@FTGTapGod]

@@ScottDumas Thanks for the reply! The little things are what really stand out to me when using a camera so I appreciate it. I was hoping the bump in photosite pitch would bring that better DR and noise performance. It was just a spec on paper though so knowing it's fairly noticeable, even anecdotally, is great. I'm selling my RED Scarlet and even though my budget for an A cam is a bit higher, I keep coming back to the F6. Working with the E2 is just so easy. A slightly more ergonomic E2 with a better sensor sounds like a dream. I haven't used one yet though so it's great to hear from someone that has had some time with it.

[@cinemenico]

Manfrotto's actually the Manfrotto Group that's also e.g. Gitzo, Joby and Lowepro. I never really liked Manfrottos. I pretty much still use my old by affordable WeiFang WF-717AH head (from the GH2 days). Used to have Sirui legs, but now rocking the Rollei C6i Carbon that was a steal.

[@ScottDumas]

Sometimes cheap can definitely do the job, glad to hear the WeiFang is working for you still. There seems to be a LOT more options in the single leg/ball head market... it's mind boggling really haha. The Rollei look nice for sure. I'd love to be able to round up all the tons of versions that look similar to that and see how they really compare sometime.

[@JAKKBAKER]

I bought this tripod and I can confirm I am very satisfied with it👍 p.s thanks for the video 🙂

[@ScottDumas]

Awesome! Very glad to hear that :) Thanks for watching!

[@plaiot13]

I was waiting for this one, your awesome dude

[@ScottDumas]

Sorry to keep you waiting! ;) Thanks for watching :)

[@billyj.causeyvideoguy7361]

Is it possible the drop plate is a sachtler plate?

[@ScottDumas]

It's a little different I believe, unfortunately.

[@mslizziescissorhands]

As I cant seem to find there own brand release plate sold separately

[@ScottDumas]

It does come with their quick release plate but I think you might have to go through TERIS directly if you want an extra unfortunately.

[@lalo5097]

Can I use this as photographer tripod?

[@ScottDumas]

For sure :) Although it's a bit overkill in most cases and it is limited in that there's no side to side tilt, which can be useful in photography. Typically a ball head would be more flexible for that type of use

[@lalo5097]

@@ScottDumas thank you💕💕

[@DJCENTIF1]

Holy crap! You are either very short or that is one tall tripod. Would this be a sturdy tripod for a Canon xa50?

[@ScottDumas]

hahaha.... well I'm not the tallest person for sure, but the tripod is I guess average height :) This would be more than enough for the XA50 :)

[@avdpost]

Looks like it's sharing some design language with the CamGear Tripods too. I'm curious if they share components in the manufacturing process.

[@ScottDumas]

Similar for sure, but not the same apparently. Teris has their own factory but a lot of video tripods share very similar designs so not surprised :)

[@avdpost]

@@ScottDumas Good to know!

[@dareckmaurice9435]

Greta Vid! can you remove the video head and place onto a lets say motorized slider?

[@ScottDumas]

Thanks! This doesn't come off to a flat base for putting on a slider just like that, so you'd need a high hat (bowl) or something. For sliders I'd really recommend either the iFootage K5 or K7, both have flat bases but the K7 has a higher capacity and more pro features.

[@funkievoodoo5022]

Hey Scott. From your experience which would you recommend between Teris and Secced at a similar price range?

[@ScottDumas]

I actually think they're very very similar. I've been using 3 or 4 TERIS tripods for years now though, and not a single problem. A colleague is using the Secced and I haven't heard any complaints either. Both great choices depending on what's available to you. Although, I'm not sure if Secced has a similar model to this TCE CF version, which is a great cheaper option.

[@따블알]

Is it a flatbase?

[@ScottDumas]

It’s not, unfortunately

[@AW-go1tf]

Great information Scot, thanks, and timely as I'm looking to get a light weight, but still pretty decent travel video tripod. Is there the option to easily remove / re-attach the spreader if you want to set up on uneven ground etc? You ever use a Miler DS10 head? How does it compare. Should be lighter as my miller head is beefy. The minimum length is listed at 720mm. Is that height off the ground with nothing extended? Do you know what the in-bag size is? I'm figuring if it can be transported in my suitcase when flying.

[@ScottDumas]

Hey thanks so much and super sorry for the late reply!! Unfortunately, the spreader would need a tool to remove it seems. As a mid-level spreader though I wouldn't imagine it should get in your way if you're on uneven ground, you can still extend the legs at different lengths no problem. I haven't used the Miller but I know they're super solid products and there are some good people behind them at that company too. Like you said- beefy for sure haha, but solid nonetheless. This head will give you a little more in terms of individual steps of counterbalance that makes it easier to balance more camera rigs even before tuning in the drag, plus I think it can hold just a bit more weight (I think). I think 720mm is the height from the ground to the top of the head with the spreader extended to let it sit a little lower (with the spreader pulled in all the way, fully retracted legs have the top of the head sitting right around 780mm) The bag is a fairly snug fit so it should be just a little longer than that, around 800mm I think. Hope that helps and sorry again for the delayed reply!

[@olakunlesmith1092]

Thanks for this information. I see you have the z-cam e2 f6. Are we seeing any review of that camera soon?

[@ScottDumas]

Hopefully! I plan to do a light review, and then make an in depth course on the camera that will be available for purchase including downloadable test footage etc (aiming for a fairly cheap price on it). What are your thoughts on what you'd hope to see something like that cost if you don't mind me asking?

[@olakunlesmith1092]

Scott, not to sound like an apologetic fan boy of your's (which I am), please just make it available and i'll buy it. I think its a welcome direction to have an in-dept work through course (like you do with your reviews) of products that can be purchased for keeps. Look forward to the light reviews, cheers.

[@ScottDumas]

@@olakunlesmith1092 Haha wow, I really appreciate that. I'll get to work on it hard and try to do the best I can :)

[@papajoe7]

What model of the teris tripod and fluid Head handle to 55 lb camera and how much are they and where can you buy it.

[@sherwin210]

check the official website www.teris-tech.com/index.php?lang=en

[@SadmanVan88]

and my DSLR camera panasonic gh5 will be compatible with this?

[@ScottDumas]

For sure! With light cameras the biggest concern would be that the counterbalance is too strong but this, being fairly adjustable, can go low enough that it shouldn't be a problem at all :)

[@galenyeo46]

Thanks for the review. How smooth is it to lock or unlock the legs to adjust the height? e.g. Manfrottos are extremely stiff...

[@ScottDumas]

+Galen Yeo thanks for watching! The locks are pretty easy to open (not in a bad way)... same for closing :)

[@MsQwerasdf1234]

Hello, thx for the review. I have a question here, can we separate the tripod and the video head of this setup? if i'm using this tripod with a slider above it, should i buy another video head for the slider to do more camera movement? or should i just buy a ifootage ta6+k5 combo instead?

[@ScottDumas]

The one downside of this is that (as far as I can tell) you cannot separate the bowl base and the video head to get a flat base for the tripod. You can take the entire video head out, so if you get a flat bowl off Amazon (they have them cheap, any 75mm flat bowl will work) you can use that with the tripod legs. What I've been doing though is putting the quick release plate for the TERIS under the slider, and mounting the slider on top of the video head (with the K5 or something then on top of the slider) ...allows you to angle the slider and get some interesting movements. hope that answers the question!

[@MsQwerasdf1234]

@@ScottDumas Tq so much!

[@Tayadventure]

@@ScottDumas hey I tried this setup and realized quite a bit of flex coming from the video head. Im only using a rigged up gh5

[@ScottDumas]

@@Tayadventure Hi, sorry to hear that. In what way do you mean flexing? (where is it happening) ...is it possibly a tripod plate issue? If you're using a single screw only that could happen.

[@Tayadventure]

@@ScottDumas I mount it directly to the plated on the head using 2 screws. Possibly because the head is made of plastic as well. It's a nice tripod but the plastic makes me doubt it's durability a little.

[@christiancamps8185]

Would you say the Cayer bv25lh is still a good budget option?

[@ScottDumas]

Depending on what you need ...just keep in mind the Cayer does not have the adjustable counterbalance like this and also no real drag control. You can loosen the lock a bit on the tilt axis to get some drag making up for the lack of adjustable counterbalance, but the pan axis does NOT work well that way. I do like the flat base of the head though and I often use the ball base under a slider, with the head on top. It's been getting a lot of use that way for me.

[@colavoce07]

Thanks for this video, i picked up the teris trix tce-cf. i fookin love it. Only problem is that i can’t connect the quick release plate to my small rig baseplate. What do I do? Ideally i’d like to be able to quickly switch from shoulder rig to handheld to tripod. Can you help brother?

[@ScottDumas]

Hey, glad you love it! Yeah... the non-manfrotto style plate was my one disappointmet. It's so close but just a bit too wide to be compatible. You could grab a manfrotto base plate from smallrig or off amazon or something, and attach that on top of the TERIS plate so that you can still use your small rig compatible plate (I'm guessing it's manfrotto style). Or if your shoulder rig is VCT style, you could get the VCT base plate and use the TERIS plate to mount that onto the TCE. Hope that helps.

[@MistaWells]

what are your thoughts on the benro s8+A373? i'm torn between that tripod and this one now. great video btw :)

[@ScottDumas]

It looks solid for what it is but I don't think you'll get anywhere close to the performance of the TERIS out of it- much more customizable counterbalance and drag here on a more professional level. So, not a knock on the quality, but features wise this one wins out :) Thanks for watching!

[@jerran_duty]

almost peed myself when that music came in for your intro headphones NO BUENO lol

[@ScottDumas]

Sorry about that!

[@jerran_duty]

@@ScottDumas lol no worries great video by the way

[@ScottDumas]

@@jerran_duty Thanks very much! :)

[@mslizziescissorhands]

Hello, I was.womdering does the quick release plate come with it of I order on Amazon? And if not I already ordered it do you know of a compatible release plate?

[@DimusTech]

One day, one day I guess I'll get a "video" tripod like those... But for now my main usage is some static shots mostly for YoutTube and travel, which means I need something stable for my setup which doesn't get to 2KG mostly and tje tripod needs to be light, so I use for some time now the Manfrotto befree carbon which I like (sorry for mentioning the company lol) But I wonder what would be your choice for a good travel tripod, might be a good vide as well

[@ScottDumas]

Haha how dare you say the M-word! ;) I think the key thing here is that you said static shots mostly. In that case it really doesn't matter quite so much. The main things would be something stable if you're shooting outdoors so the wind doesn't shake it (and strong enough to hold the weight of course, but most tripods are). A super cheap head might slip at certain angles but as long as it's rated for enough weight then it should do the trick. After that is size, weight, etc. The Befree can do the trick for that, I also liked the MeFoto series and as kind of crossover tripods the new selection from iFootage is really quite good. In any case, once you're introducing movement into your shot is when you really need to start considering something like this :) Helps a lot for smooth pans and tilts plus making sure that all stays perfectly level.

[@DimusTech]

@@ScottDumas Ye I got that, didn't know that iFootage create tripods, or maybe I though of a company with a similar name lol... Honestly I just so a video about the Peak Design tripod, would be perfect for my needs but it's actually heavier than my befree so I guess I'll pass for now. For movement, in my case it will probably be some sort of moving left or right for a nicer shot of a product that I'm showing, So I'm starting to think of a slider, you actually I remember showed some cool small slider, when I'll decide it's time (I try not to over budget my still small KZbin channel lol) I'll take a look at it again... Oh, and sorry for the late reply, lots of work (daily work as an IT) lately, even worked this whole weekend (The weekend for Israel is Friday - Saturday so for me it's already over (without any rest lol))

[@ScottDumas]

@@DimusTech Ah yeah- I actually don't love the design of the PD tripod... has some nice points but just doesn't do it for me lol. A slider is a great tool for youtube product shots for sure. My #1 recommended tripod is still the Zeapon Micro 2 (not sure if that's the one you saw or the cheaper/simpler Zecti one). The Zeapon is just so good though :) Anyway, hope you can get some rest! haha, just gotta get through the week first.

[@DimusTech]

@@ScottDumas Lol thanks, is there something in particular you don't like about the PD tripod? And ye! I was talking about the Zeapon Micro 2... I guess I have some bad luck those days, Now I'm also sick so no good for shooting new videos (Though I always wanted to try something that won't require my voice hmm...) and for some reason my views and earnings are also somewhat down on KZbin... not too worried since it's still mostly a hobby but, annoying...

[@ScottDumas]

@@DimusTech I mean, I'm being picky about it but I believe it's a non standard plate which is annoying (I could be wrong there, can't remember) and the center column and ball head design doesn't look incredibly stable and rigid. Again, I'd have to try it to be sure. Also looks like it would limit tilting in certain directions? not sure. Peak Design, if you're reading by any chance, feel free to send one for me to try out and change my mind! ;)

[@charlieross-BRM]

You've had me scouring for information on the Teris products for a full day so far. Their site really doesn't reveal the details of the various models so maybe you can help because I watched this and the video you produced that is on their site. Spreaders: All Teris models seem to be ground spreaders. I like to take my gear out to rivers and parks as well as using it inside. How do I cope with that? Illuminated bubble level. If it wasn't for your other video I would not know some have it, some don't. The website is no help on knowing which. Drop in top plate vs Manfrotto style slide in from the back plates. Again, I can't see which tripod kits have heads with top plates. I want to buy a carbon fiber package for a camcorder total payload under 5 kg in the next two months. Teris-Tech needs a fresh director of photography in their marketing department. Did I say keep up the good work? Your presentation style is good. The number one goal is getting the information received, not how flashy you send it.

[@deonvanrooyen5920]

manfrotto tripods? speech is a little unclear..., but otherwise good video!

[@krane15]

Don't put down Manfrotto. You give off a sense of bias when you do that, and bias leads to untrustworthiness.

[@ScottDumas]

It's a bias for sure but it's based on extensive experience. As a reviewer making comparisons is what I need to do and literally every single thing I've ever owned from Manfrotto has broke or not worked appropriately. It wasn't just a bias based on feelings or style or something else unsubstantial. Hope that makes sense.