The Best Way To Fill Nail Holes In Trim(you were doing it wrong)

[@m2svirtual384]

Compared 6 products. Intros, demonstration, conclusions. Left nothing out. All within 6 mins and 34 seconds. You sir, are legend at not wasting a KZbinr's time with unnecessary fill. More content creators could greatly benefit from following your lead. Thank you for caring about our time.

[@TheFunnyCarpenter]

From my point of view I consume a lot of KZbin to learn things and or to be entertained. It kind of sucks when non entertaining people ramble on for 7 minutes about nothing😂 I try to avoid that the best I can! I do wish on this video I had some better camera sliders or something to get better shots of the test results… and had a bit more time to have worked out and compiled some of the details better.

[@m2svirtual384]

@@TheFunnyCarpenter don't sweat it my brother. For those of us that have some experience using these products, what you provided was perfect. Anywhere else, this a 24 min video, and unfortunately we've grown use to it. I watch a lot of your videos, and this is your thing. And what that thing is, of course, is that you are a consumer of info - you know what we've come here for, and you deliver that. Please don't ever 'fix' that. 🧡

[@m2svirtual384]

I also realized that I'm not subscribed. I 'fixed' that.

[@alisaheb1549]

I agree right here. Great video you got another sub right here today. I'm excited to go do some patching 😆

[@davidgreff2799]

I know; even had time for bloopers at the end!

[@PopsGG]

Thank you so much for not making this a 15 minute video. You get right to the point! I love it.

[@pcm7315]

Exactly.

[@jareid82]

Yeah, man do I appreciate the relevant information without trying to turn it into a documentary.

[@marke.1021]

the outtakes at the ending are fun as well

[@richardsamski6050]

Amen.

[@wkbdgeorge]

Agree with pops

[@Hopps515]

Perfect I knew there was a reason why I hadn’t filled those nail holes for the last 4 weeks. This video was what I was waiting for 😂

[@markm0000]

I’ll buy it.

[@Galaxylynx12]

Same here🤣🤣

[@steviec67]

Four weeks I’m going on a year 😂😮

[@nathaliesaa3122]

😂😂

[@a.j.vankampen7294]

@@steviec67 2 years +...but that ends soon! Grateful for this video.

[@TheJeffChase]

I don't often do home improvements, but when I do, I'm coming to this channel. Excellent, clear presentation.

[@williammckinley541]

Been painting for 25+ years and the old school method is by far the best. Crawfords painters putty rolled into a ball ,then you roll it in plaster of Paris. it sets quick and easy to sand the next day. Just push it in with your finger some bigger holes may need a 2nd application.

[@KJ_nyc]

Interesting video. I don't know any professional who fills holes with a finger. RockHard is hugely popular among NYC contractors, and I've been using it for decades. Yes, you have to mix, but I love that I get to control the consistency, depending on the hole's size. But mostly, I love the product's shelf life. It NEVER dries out. It can sit on the shelf for years and still be perfectly usable. I also LOVE how easy it is to sand once dry. It even sands beautifully with 600 grit paper around gentle edges. I also love how quick drying it is. And, you can add color to it for custom color work. I can't recommend RockHard enough.

[@maryh2684]

I’ve been a landlord for over 35 years, and have had great success with Ready Patch. I do one coat, slightly overfilled, and sand with a damp sanding sponge. Slightly wetting the sponge makes the sanding much easier, and gives a smooth finish. I also put a sheet of plastic wrap over the top of the open can, then add the lid; make sure the lid is on tight, and the product will stay soft.

[@ryang3992]

I fill a lot of nail holes on paint grade trim and my favorite method to date is the drydex but only in a tube. You don’t have to worry about the material drying out or the crappy lid and it goes a long way. The tube allows you to control the amount of material on your finger tip very well and you can easily smash in the amount the fill the hole, then wipe away the excess and I immediately follow up with a light feathered wipe over top of the filled hole to accommodate shrinkage. Even a small room will usually be ready to start sanding by the time I would my way around to my starting point. After that the key is a 1/4 sheet of 3M gold 180 grit. It removes the material in a couple of light swipes, it leaves a very smooth finish without the over sanding divot, and it doesn’t gum up at all. One 1/4 of a sheet goes a very long way. With 18 gauge nail holes or smaller I typically am good to go in one pass, a 15 gauge hole will still often require 2 coats.

[@95thousandroses]

I'm pretty happy with drydex on the finger. One hard swipe to press it in and immediately another light dab over top for shrinkage.

[@bradoshaholmes2867]

@@95thousandroses the first time I used dry dex I was taught to carry a damp (just not soaking wet) rag and wipe the repair just before it dries or as the last of the pink is gone. Doesn't get any smoother but I don't know why I don't see more people doing this.

[@95thousandroses]

@bradoshaholmes2867 I'll have to try that. Seems like the rag would pull a little filler out of the hole though making it ever so slightly concave.

[@jefff6167]

You did a very good job with this video. No fluff, no annoying music, just the facts. 👍🇺🇸

[@blaster-zy7xx]

Kudos to anyone who actually applies two coats of anything as a finish nail filler and sands between coats. With all the things I have to do in my life, it gets one coat, sanded and painted. The difference in that second coat and second sanding is one of those things that I accept and move on with my life.

[@LarryB-inFL]

Thanks! I understand that the Durham's Water Putty loses points for needing to be mixed, BUT, I do LOVE that it doesn't have me reaching for the filler and discover it has dried out and gone bad! Yes, if availabIe I grab other things first, but sooooo often the spackle/wood filler/putty is no longer good, and the water putty sits there for decades, always ready when I need it!

[@LarryB-inFL]

@@keithmarlowe5569 You'll like having it around, and it is really fairly impressive stuff.

[@usernamemykel]

Totally agree with it's readiness longevity!

[@kathleenleary8296]

I love that stuff!

[@guillaumepare9651]

That's why I always have some. Mixed one is dry and you need it now. At least you can use that.

[@numinousmud4]

I do house prepping and I love ready patch. so long as you keep it wet and not dried out, it's a winner, shapeable like a smooth drywall mud, can do small or large repairs on painted wood trim or door frames. One coat, dries quickly.

[@scottsatterthwaite4073]

I'm a contractor and use mostly Dry-Dex. I use a single application with my finger leaving it overfilled and I don't sand it. I smooth it with a damp cleaning sponge.

[@michaelwayne1977]

Crawfords painters putty is a great product that didn’t get tested here. Been using it for decades.

[@sandymac529]

Love that you test different products out and show us the unbiased results. Thank you so much!

[@TheFunnyCarpenter]

Thanks Sandy- this has always been a life long passion to test things out.

[@Adanacon]

Love your videos ! Your fun to watch. As a trim carpenter….I find the best way is to minimize your holes by using a stud finder and nailing in the profile so you don’t see them. Then use a bit of Color matched caulk to fill the line where the nail is. I pre spray all my base before install. Flat stock trim I tend to pre spray and glue on with an instant bonding system so I have no nails to deal with at all. I use a 21 gauge Brad nailer for standard trim and an 18 gauge for premium trim 5/8” and up. 1-9/16” brads always to stay away from waterlines etc

[@TheFunnyCarpenter]

Thanks buddy! Sounds like you’re running a tight ship with your trim work- I like it!

[@progression_decibel]

@nailit1860 - planning to install flat stock trim in the garage - what brand bonding/glue you like to use for that? Also I was taught the same technique for nailing and pre-spraying - what brand of color-matched caulk you use and how you get it? I never heard of that aside from the typical DAP stuff in the store like White, Brown, Almond, etc.

[@heyblackduck]

Currently in a hardware store and gotta say, I love this video. Been working on my trim using your videos and has made my life much easier. Thank you!

[@TheFunnyCarpenter]

Best wishes on your future projects! I'm really looking forward to making some more detailed vids in 2023.

[@tc9148]

Perhaps the best, most comprehensive and helpful test/review ever published on KZbin. I was having trouble getting flawless filled nail holes and this fixed it for me. Thanks so much!!!

[@j.castino7585]

Soooooo, I was all set to buy the Shur Stik product but since it's made in Canada, I'm not going to pay $13.50 U.S. for shipping on a Ten Dollar product. Then, the Dyna Patch must also be made in Canada since I cannot find it in the States! I guess I need a U.S. based person for the review.

[@CorrectCaulking]

This video is incredibly helpful! I love the step-by-step instructions and the emphasis on choosing the right filler for a seamless finish. Your tip about sanding and painting for a professional look is a game-changer

[@amp713]

Thank you for trying everything out. Always share your videos to my husband. One of his major peeves is nail holes especially because of all the molding we just did in our house.

[@TheFunnyCarpenter]

Thank you kindly!

[@ryanduke70]

i use one light coat of drydex with a finger... then instead of sanding, i use a slightly damp microfiber cloth (the smooth side, not the coarse)... the holes literally disappear. and it's the fastest, cleanest method i've ever seen.

[@kehlmeier]

Cleaning tile grout with microfibers is a game changer. I haven't used a sponge since.

[@nicademusx6624]

Microfiber to finish clean drywall dust after vacuuming changes the game as well

[@number1pappy]

The Dyna patch pro isn't available in my area. It's only available online. I use the Elmer's and have been happy with it. I also like the fact that it's in a squeezable tube. Makes it easy to apply, and it doesn't dry out like canned patch compounds seem to do.

[@maximusthemerciful9452]

I love ready patch. Use it all the time on exterior projects.

[@geyser3445]

I was told by a professional finish carpenter to use glazing compound. I have used it and it works well.

[@mariodegrazia7497]

Nice video thanks for info, I find all your videos very helpful. I am a long time painter and please realize it also matters what wood/substrate you apply your filler to. Ideally hard woods or metal you want a harder filler and soft woods a softer filler. A soft filler on a hardwood especially if hand sanding will dig out the filler during sanding. A hard filler on soft wood and the wood around the hole will sand away before the filler. At least that’s what I was taught long ago, I would love to see a test that accounted for this.

[@TheFunnyCarpenter]

Excellent idea for a video Mario, thanks for checking this one out!

[@tomtalley2192]

As a professional painter in the northeast, I use the redipatch on window sills, and areas on trim and doors where a layer or two of paint is missing, I don’t use it on holes. It’s like a skim coat.

[@EverydayHomeRepairs]

Nice! Where are you picking up your Dyna Patch Pro? Local paint shop?

[@TheFunnyCarpenter]

Hmmm it looks like Dynapatch pro is hard to find down South. In Canada you can get it at Home Depot and a lot of paint stores.

[@YohanathanD]

Been using dry dex for years. I watched this last week and switched to Alex spackle for the crown i imstalled and I'm almost embarrassed I ever used dex. Thank you for this

[@huejanus5505]

When doing trim work, i set the nailer at about a 1/32” depth from the surface, give baseboards one coat of finger applied drydex and two on door casings, rarely sanding. The results are always good. If you crawl around on your hands and knees, you might be able to spot a nail here and there from certain angles, but not when you’re standing or sitting. I’m not knocking anyone who wants a perfect job, but i fail to see the point of the extra work. As well, trying to find every white filled nail hole on a white baseboard and then finding them all again to sand is a major pain in the butt.

[@user-hm5zb1qn6g]

bingo

[@marvellstarks2434]

It appears nobody sells the Dyna patch pro

[@rogerwhiting9310]

Sounds like the Sherwin Williams stuff is the way to go.

[@motoace2007]

I just recently discovered your channel. I appreciate your sense of humour and honest perspective, not to mention the immensely useful tips that you are giving us. Keep up the great work.

[@TheFunnyCarpenter]

thank you!

[@rogerandjoan4329]

He is a funny guy and really nice. I live next door and the only thing weird is that he’s named all his hammers.

[@exnjute]

I've been using M&H for years. IMO it is the best on painted wood white trim. I put it on with a clean putty knife and then strike off any excess. II use my finger in tough spots. As I'm filling, I always have a wet(tightly wrung out) microfiber rag and give each spot a quick wipe. Never or rarely need any sanding or touch up. To each his own.

[@conradsobczak6389]

There were many nail holes to fill after a contractor put up the primed trim. I painted the top coat. Thought of getting a reed from a wind instrument to spread the filler, but the high school band was off for the summer. Rather than use a putty knife or finger, as in past projects, to add the Zar Wood Patch, I grabbed a popsicle stick; cut the rounded end flat, then sanded both sides, about a 1/2 inch or so, to get a flexible, yet stiff tool. It worked well. Two light coats of the filler, then sanded. I tried sticks from cheery, orange and lemon flavored popsicles to see if one worked better than another-undecided. I think a child or grandchild could help with this part of a project.

[@frenchyroastify]

As a finishing carpenter, Dynapatch Pro is the best. It sands at the same rate as wood, dries fast, and is quite hard. Gotta keep the lid on it as it will get crumbly fast. I make solid blocks for sanding by spray glue sandpaper on MDF.

[@superbear617]

Dyna Patch does not seem to be available in the US. Or, perhaps it is sold under a different name.

[@moudavis5830]

I could not order the top two dry patch Shur stick or Dyno Patch Pro. The only option destination options were Canada

[@milesgibson8880]

You really are the best at this! Concise, clear, efficient.

[@ThisTall]

Keep this up and you’ll become the “Project farm” of trim carpentry. Lol Good work.

[@TheFunnyCarpenter]

Thanks buddy, that would be great! Hopefully in the next few months I’ll get into a space where I can really test some things out in a home setting! It’s been a bit of struggle making the videos in my own family home.

[@ThisTall]

@@TheFunnyCarpenter looking forward to it. At least you got paid to make a cpl nice little Reno’s to your own place.

[@usernamemykel]

And we'll name him Todd II ; )

[@philipramsden4975]

I've been using the Elmer's wood filler for years and has always given me great results and never had any issues with paint coverage

[@dalesworld1308]

I started housepainting in 1977 and we always kept a ball of Dap 33 glazing compound in out shirt pocket to fill nail holes. Press it in with your thumb and run your putty knife under your thumb and the hole was filled. If the putty got a little dry you rolled it around in your palms and the oil from your skin and the heat would soften it. If it was too soft and oily some dust made it more workable. I think it's kind of silly that zero evidence of a fastener is what people expect today - most people never get down to look at the basebaord anyway.

[@agogley]

I really appreciate the tests and the result are clear. That being said, there is always a tradeoff with time. I've found it's just much faster to use drydex then come behind with a artist bush and touchup the holes. I use a little bit more than I have then after drying I come behind with damp paper towel again. I don't do any sanding and then use artist brush to paint just the holes.

[@ChuckGates1]

I like the Durham Puddy because of the reason he counted as negative... the mixing! I hate opening those other products only to discover it has dried out and is now useless. The Durham can be stored for as little or long as you want. Plus, it is very inexpensive.

[@alisaheb1549]

Hey bro this video you made is excellent perfect really. You got right to the point you gave plenty of information tone of voice was appropriate. I've seen a bunch of your videos I haven't seen all of them but this one here is my favorite so far. Today you got a new subscriber I appreciate your work bro keep up the good work

[@tenmilliondollarsnow]

Dyna patch not available in the US? Suggestions? Thanks.

[@LV4REAL]

Excellent video! Very, very helpful, and I love your cute outtakes at the end. 😊 It was great! Thank you so much! 👍

[@conradcoolerfiend]

Interesting results for the Drydex compared to your last test video where you said it did well on the nail holes. I think it depends on the sanding as it’s really easy to oversand. I found a good method for the Drydex with no sanding, but takes a light touch, is: using finger or knife, fill hole and wipe off all sparkle around the hole. It’s ok if the hole is slightly under filled. Second fill, do the same thing. With a light touch I have got perfect results from that. It’s either that, or use the Dynapatch, but it will take a little muscle sanding it.

[@TheFunnyCarpenter]

Yes I was wrong about drydex. I think it’s just too soft to be great for nail holes. It’s probably fine with a lower gloss paint, but with the high gloss it even semi gloss…it kind of sucks.

[@user-hm5zb1qn6g]

That's exactly how you do it. Ask any painter. Fill and wipe with your finger. Once it's painted with semi-gloss trim paint nobody will ever notice if it's slightly underfilled.

[@bobcougar77]

.... I absolutely love MH Ready patch. I don't know what to say, I've used almost all of those and like Ready Patch the best of those.

[@shedengren]

Found your channel tonight and just binge watched liked 10 videos. Love the info and the humor.

[@StevesYoutube905]

I've got ill fitted crown moulding to clean up and a main floor of baseboards to reinstall, this video is going to pay a lot more than the 6 minute investment in watching it. BTW since I wasn't falling asleep in my chair waiting for the end, I enjoyed the bloopers at the end too. Good, solid vid. Thx!

[@lifeinhd4053]

Noob question: is there any reason to nail baseboards at all? Surely some dabs of liquid nails, spaced about as far apart as you’d install regular nails, will keep the baseboard attached to the wall just as well, but without the need to patch and sand? Especially once you caulk the baseboard to the wall, it won’t be going anywhere.

[@petemiller519]

Best result I found is two applications of filler and priming the casing with an airless completely before applying paint. The primer seals the filler and makes it invisible. Good video, cheers.

[@zanna9857]

Your videos are so great! I learn something new every time I watch! Can't wait until you get a million subs & some sponsors! You're on your way to greatness!!!

[@TheFunnyCarpenter]

Well this comment is a real bonus to the day! Thank you🍻🙏🏼

[@mrman487]

I've filled thousands (30 years in new construction) of nail holes with the green label spackle from Sherwin Williams. It's all I'll use. It works better than all of those.

[@TheFunnyCarpenter]

I’ll have to check it out

[@davidnation8553]

Green label or Bondo thin is awesome. 100% agree

[@thepianist7084]

Because of your comment, I went down to Sherwin and bought some. It worked great! Thank you for taking the time to comment!

[@JogosMofados]

Sir, you just nailed it. Definitely the best comparison out there!

[@malabarspyder]

I love it that you tried many fillers. I wish you had demo'ed more trim! Mine is glossy plastic (pvc?)..

[@pleappleappleap]

What if you're staining?

[@HFRajuncajun]

Nice thorough test. I was always taught by the carpenter I started with to do base coat with bondo and finish coat with Dyna patch. This is for doing joints in flat stock and mitres. The bondo gives a good resistance to cracking. Which on larger joints the dyna patch tends to do. But for nail holes, you can't beat it.

[@TheFunnyCarpenter]

Good advice Kyle! What type of bondo do you recommend?

[@HFRajuncajun]

@@TheFunnyCarpenter I believe Bondo is the brand. Whatever their regular body filler is. You can get it at Canadian Tire. Recommend the small container, as the large is quite a lot.

[@Ezzell_]

Anybody else hits the like as soon as the video plays?.......cause you know you wont be disappointed in this guy.

[@TheFunnyCarpenter]

High praise!🍻cheers

[@DP69264]

Try joint compound. Used it on all of mine and it worked great. No shrinkage and dries pretty solid. Little more messy and separates in the can but works great.

[@kentrussell4007]

When I do this, I first lay down a little section of painter's tape where I'm going to nail the board and then I drive the nail through the tape. Applying the filler with the tape still in place makes a very clean fill and rarely requires any sanding at all.

[@paulcalif]

Genius!

[@mattfrick8038]

Sounds efficient. Get real.

[@z.a.dewitt8664]

I've been doing a lot of work with stained rather than painted trim and I noticed the best way to fill is (lightly) mixing sawdust from refinishing the piece and mixing that with epoxy. It's not the easiest to work with and takes a lot of skill, though. More so than the problem of learning the right ratio of sawdust to epoxy was the issue of accidentally using too much around the outside of the hole which causes some issues with staining.

[@geogaletti]

Thanks for delivering this comparison in a quick and to the point video. Lots of great information. Love your channel.

[@TheFunnyCarpenter]

Thank you! I appreciate you watching

[@trig]

Excellent work, thank you. For architrave, in the UK, I use a spackle ( feels like plaster with a pva added) on a putty knife and slightly over fill. I then come back 15 mins later and rub down, very lightly, with a damp cloth to remove the excess, no need for sanding.

[@TheFunnyCarpenter]

That’s an interesting technique Michael. I’ve tried something similar with the Drydex and damp paper towel. It worked so so, I’m sure the spackle would be a better option.

[@LunaMail]

"The knife, the sheet sandpaper, *in the conservatory* ~" Hehe! Made me laugh XD Thank you for the fully tested rundown! Heading over to the home improvement center to pick some up as I'm planning a room makeover and there are so many holes!

[@19stoney64]

I concur, just finished a 6 week remodel and I’ve always used the pink lid and I was unhappy with how it turned out. I’ll give the dyna a whirl. Thx

[@TheFunnyCarpenter]

Best wishes

[@howellcp]

Very good video. Out of curiosity why not use drywall mud? I know that sounds different but I have always used a quick dry 45 or 90 on my nail holes and I’ve never had an issue with them bleeding through. They finish off completely flush. No shrinkage, it works perfect

[@ThunderlipsJoeYT]

Mud expands more like sheetrock, wood expands and contacts more than mineral based surfaces. 2nd reason is adhesive, drywall patch has less adhesive than spackle so it sands more easily and more evenly. So, spackle sticks better to wood and finished surfaces as most trim has at least a semi gloss finish, ie more adhesion needed and is more crack resistant. The negative to basic spackle is harder to sand. The higher end ones (MH DP and the one his paint store recommended) have finer aggregate and different adhesives so they get the better stick without being as much of a bitch to sand as wood filler (wood filler =elmur's glue + sawdust)

[@hanktank4574]

I've been doing trim work for a long time and the best thing that works on nail holes is "joint compound" it has never failed me after 30 years

[@marvellstarks2434]

It shinks tho. Gonna take 2 coats. Time us money

[@DarrenEffle]

Joint compound will get hairline cracks after the 2nd door slam. That’s been my experience, I prefer painters or Crawford putty knife smooth. But if that works for you great

[@justinprentice2004]

The hand tube of dap is my go to its printable and great easy to use

[@paulsylvester1394]

I was really excited watching this video. One suggestion is to better show each product and where we can get it. I am in the Boston area and cannot locate either of your top two choices!

[@rickn.1103]

Nice video very good job

[@MrPendell]

As a pretty extensive DIYer, when filling nail holes on painted trim I usually paint the trim before installing, then fill Brad nail holes with a homemade compound of cornstarch and whatever paint I used on the trim (usually a semigloss melamine). Has worked very well for small Brad nail holes- I mix it into a pretty dry putty then just work a small amount in with a thumb and rub off excess.

[@zeus_2001]

Wow, you deserve an award for that contribution to science. Bravo.

[@ballgms308]

Mh ready patch is a patching compound better used on large gauges or projects needed to shape. It’s just like Bondo but takes longer to sand and no mixing

[@blipblop92]

Amazing content. I love how you test all the combinations instead of "from my 30 year experience"

[@Dline27]

Redcap Dap window glazing 33 one wipe to the nail hole, another wipe to flatten, paint right away, never shrinks or cracks, by far the best ive ever used. Painted for years using drydex and other stuff with a knife, my experience no knife needed just finger and glazing. Try it and let me know

[@TheDutchGuy110]

I installed my crown and base using a high tack construction adhesive called 'Soudal Fix All' just lay a bead around the perimeter and install i had none come loose in the 2 years since, it has a slight amount of flex in it so it can cope with the changing moisture levels in the material

[@flyingburritobro68]

Easy answer is Dap Bright White caulk. I like to paint my trim before installing it and this caulk easily covers small holes from a brad nailer and it perfectly matches Sherwin Williams bright white. No sanding needed. Quick and easy.

[@TheFunnyCarpenter]

Great to hear you’ve got a great method working for you🍻

[@conradcoolerfiend]

thants pretty cool

[@markhedquist9597]

My professional painter buddy swears by redi+patch. The black can with orange lettering. I've used it, like it ok. But not perfect in my eyes. I'll try your recommendation. You haven't let me down yet!

[@ThunderlipsJoeYT]

Got it from my pro painter as well. It's good for interior and exterior and large holes and gashes.

[@cindystokes8347]

Yeah, the Dyna patch also not available in the US

[@danielmercurio8886]

How come you don't have painters putty in the mix it's an oil-based if you prepare it well apply it with a light hand until it's smooth the self out you don't have to do any sanding at all

[@DaveHill-fx4uh]

Here’s the way I just finished repainting 10 units, converting from natural wood trim to white trim. First; take a surrated knife and neatly cut the face and two sides of of your sponge sanding block. Second; Use your finger and apply a good coat of drydex over the holes. Next; don’t let it dry. Wipe it with your wet sponge that you just made. The sponge used for sanding blocks is super dense and won’t “ dip “ into the hole and leave you a divot. Rinse and re-wet the sponge as needed. The units I was doing had about 600-700 holes each, both old school and brad nails. Had I waited for any product to dry and then sanded it, it would have cost my client a fortune, or me the job. Try it, it works. Cheers

[@frankb.3556]

Great video. Unfortunately neither of the top two products are available in my area.

[@jmi967]

My go to is 3M small hole patch & primer. Doesn’t shrink, sands okay, dries incredibly fast, and cheaper than the top 2 on the list.

[@brettwagner-sr4yu]

Oatey makes a fill stick. You can get it at lowes back with the plumbing stuff. It’s a long stick. You knead it until soft and it sets up rock hard. Very good for fixing chips on casing and jamb

[@mikewoodley2587]

Explanation is so simple and easy to remember. Thanks.

[@TroyStevensStelzerPaintingInc]

Sanding sponges are so flexible they'll contour to the holes and create divots. Paper for the win. Also, we don't consider "light" or "heavy" coats, just "flush coats" or "build coats". Flush coats are almost always better, except for when having to create exterior corners, then some build is needed. I don't disagree with any of your findings though. Every professional painter has their favorites. Often times mixing some lightweight spackle with Elmers leads to great results as well.

[@dennydeckerful]

I've always used spackle, but my painters use UGL Glazol elastic glazing compound, no sanding. I was flipping a house and couldn't get the trim right (trying to guess where the floor leveling was going to be) and it looked like I shot it with a shotgun. When they got finished it was perfect. I've since used it, you have to roll it around in your hand to get it pliable and push into to hole with thumb twisting a little as you remove excess. And did i say no sanding.

[@aktraveller]

Thanks for an excellent review. I have a lot of nail holes still left to fill. I appreciate the thoroughness and the quick review.

[@LMe-g2z]

great video, objective testing, quick and to the point. THANK YOU

[@crmnlyinsane]

Crawfords spackle in green can is the best product, hands down. Does not shrink and extremely easy to sand. Quick spot prime then paint, and you sre done.

[@OldJoe212]

Thanks for taking the time to show us most of the common options. That helps a lot. HOWEVER. The "CLUE" reference was clever but we shouldn't have to wait for the outtakes for the funny stuff. Your grades. "A" on tech info. "C" on funniness. Overall grade, "B".

[@TheFunnyCarpenter]

😂I hear you Joe! I haven’t had any energy for funny stuff lately, the summertime is pretty hectic with no school for my son.

[@perniciouspete4986]

Nah, A-,and I'm a tough grader.

[@thebobloblawshow8832]

Great information. I used to use dry den all the time. Switching to Elmers. Thanks.

[@Deidrehammond]

Definitely liked the quick Cluedo slip.

[@mikepauley7679]

This was exactly what I needed. Perfect video packed with educational content and a little humor! Loved the clue reference, I was thinking the same thing as you were saying it. Definitely going out and getting that Dynapatch - thank ya, sir!

[@jylfarm1964]

I use the standard USG joint compound for drywall (2 coats + correction). Get good result

[@tamaraadams7072]

I find glazing putty to be the most effective, yes, normally used by auto body shops. Fill with a putty knife and sand with 150 grit. One coat and done.only issue is it’s red so I have to hit with primer before top coat.

[@uncleronny6748]

NitroStan comes in a gray color

[@rdw3171]

Good luck finding "Dyna Patch Pro" in stock anywhere right now (unless you live in Canada).

[@kennethcerreta7183]

Been mixing joint compound with plaster and a little color tint, apply heavy on holes (so u can see it better when dried) usually good with one application then sand with 180 or 220 grit sandpaper.

[@billymartyn5573]

A week ago I bought a tube of DryDex after you recommended it in the door install YT… lol thanks for the very detailed comparison.

[@TheFunnyCarpenter]

Brutal! I was in the dark back then! I was shocked at how bad the drydex was. Mind you high gloss paint takes no prisoners!!! Most fillers will look ok with a satin paint.

[@mackinnonremodeling]

The MH ready patch is actually great for a big area or rotted out area. Its hard and sandable. I never really use it for filling nail holes

[@petersmith3639]

I love Ready Patch, especially if you have damaged trim with nicks and gouges , you need multiple coats and tuffer to sand but the results is what I look for

[@ThunderlipsJoeYT]

Yea exactly what I use MH for. I've never had issues using it for nail patches but maybe they tweaked the formula?