The Best Way to Mount the EVO SS Wearable Gimbal🚴 | EVO Gimbals SS Action Camera Stabilizer

Kris Jamieson shows you the best way to mount the EVO SS Wearable Gimbal for immersive POV shots. Then drop in with Kris as he goes for a wild ride! Check the EVO SS here: www.evogimbals...
EVO SS 3 Axis Wearable Gimbal from EVO Gimbals →
www.evogimbals...
30-Day Money Back Satisfaction Guarantee
1-Year USA Warranty
=========================
Keep it Smooth!
#evogimbals #keepitsmooth
=========================
FASTEST STABILIZATION IN THE INDUSTRY
Built for speed, the EVO SS Gimbal delivers the fastest stabilization performance in the industry using proprietary stabilization algorithms for an effective combined refresh rate of 4kHz - resulting in ultra-fast reaction speeds and the smoothest shots.
COMPATIBLE WITH MOST ACTION CAMERAS
====================
The EVO SS comes with our standard universal mount compatible with GoPro Hero3 through Hero5 Black, Garmin Virb Ultra 30 and Yi Action Cameras. Optional mounts are also available for GoPro Hero Session cameras.
• Supports 75-140g Payload 1
• GoPro Hero5/6 Black
• GoPro Hero4 Black/Silver
• GoPro Hero3, Hero3+
• Yi Action Camera
• Yi 4k+ Action Cam or SJ4000-SJ6000
• GoPro Hero Session*
• GoPro Hero5 Session*
EVO SS Gimbal Features:
====================
• Works With Most Action Cameras
• Built-in Camera Charging**
• Up To 5 Hours Run Time 2
• 650 Pan
• Motion Time-Lapse 2
• EVO Remote APP Ready 3
• Tripod Compatible
IN THE BOX:
====================
1 - EVO SS 3 Axis Gimbal
4 - IMR 18350 Rechargeable 3.7v batteries (900mAh each cell)
2 - M2.5 x 22mm thumb screws
2 - GoPro Charging Cables for Hero3 and Hero4. Cable for Hero5/6 sold separately
1 - GoPro Accessory Mount Adapter (for GoPro Mounting System)
1 - Universal Telescoping Extension Handle
1 - Micro USB Cable (for Charger & Software Update)
1 - Warranty Card ( 1 Year USA Parts & Labor Warranty)
1 - User Manual
+++++++++++++++++++++++
+++++++++++++++++++++++
MOUNT IT OR USE IT HANDHELD
The built-in ¼-20 threaded base allows you to mount the SS to any tripod, monopod or similar mount giving you the ultimate freedom to produce a variety of shots in a compact, lightweight and portable setup.
Included as a bonus is a compact telescopting handle that extends from 9" to 34" in length allowing you to easily switch to handheld mode 4.
GoPro Gimbals
Gimbal for GoPro
3 Axis Gimbals
Gimbal Stabilizers
Shop the Best GoPro Mounts, 3 Axis Gimbal GoPro Stabilizers, Smartphone Gimbals, DSLR Gimbal Stabilizers, Gift Cards & Accessories by EVO Gimbals.
Great Service and Support Backed by a Full 1-Year USA Warranty
Visit us at www.evogimbals..., stop by our shop in Bend Oregon, or call [phone] Monday to Friday, 9-5 PST.

[@danfuerthgillis4483]

For those not using the cube go pro, make sure you have the gimbal reversed as the normal go pro has to be used upside down ( mirror mode) so this means the gimbal motor has to be at the top ( shown here as "bad") so that your image is centered with your bike bars.

[@VictorGarcia-kk4dn]

Almost throw away my gimbal, until I ended up viewing this video....OMG. Months of headache solved with this video! Kris, you are my new idol!

[@EVOGimbals_KeepItSmooth]

That's great to hear Victor! Before you throw away your gimbal, please contact us with any other concerns that may pop up ;)

[@QTMagic]

Thanks for this video. I bought an EVO SS gimbal a few years ago, and I used it whilst walking before putting it aside (for some reason). I recently found it again and went cycling along my local seafront. It worked perfectly! I don't think I would have got it to work well without this video.

[@kaatinthehaat]

I have just drilled a hole for a 1/4" bolt into my GoPro chesty and then mounted the Evo SS gimbal directly to the chesty. It is much more stable than using the gopro mount and adapter. Wearing a pack with a chest strap across the top part of the chesty plate makes it even better.

[@derekmurrow5665]

I just did this and my footage got worse. Which way are you facing your gimbal when screwing in?

[@kaatinthehaat]

Derek Murrow it faces the same way as in the above video. Round part facing up

[@EVOGimbals_KeepItSmooth]

A couple of footnotes for you all....The GoPro Chesty is a bit out dated at this point. When it was designed many years back, nobody thought about mounting a gimbal to it.....this was prior to Karma Grip as well. The problem begins with the elastic straps.....no matter how tight you make them, they turn the chesty into bungee jumper with the added weight of a gimbal. Simply too much whip going on. The added G forces and whip will not allow any gimbal to properly function. If you choose to use the GoPro QR system and finger tabs....you are only adding more swing leverage by moving the weight outward, further from the chest.....creating even more whipping. If you want to use your existing GoPro Chesty, remove the over shoulder elastic and replace it with firm nylon webbing....eliminating the bounce and bungee effect. By using a larger moto roost protector, you get the base stability as well firm webbing to nix the bungee whip effect of the GoPro Chesty plate. Ultimately, everyone has a different riding style and this system could be overkill for many. Keep experimenting and get creative. #keepitsmooth

[@whistlerrealestate1]

Awesome video and thanks for the tips. Where can I find that youth roost protector?

[@CactusJackSlade]

I did the same thing, although he does have a point about the stretchy chest straps.... better to have firm straps.

[@FunSightseeing]

I fell down ♥ Great captures enjoyed the riding mate

[@rrurban]

Great tips and that trail was sweet!

[@marek19]

Fantastic review and advice!!! Bravo. Correct me, if I am wrong, but after pulling the EVO out of the box before shredding, it needs to be adjusted in settings from "walking" to "motion"; for the proper panning follow? Thanks. Marek

[@NWTrailSeries]

Can't wait to get an evo ss! Your gimbal is so well regarded, you got the mtb community selling it for ya!

[@LiftedAdventures]

ok now this excites me. I was trying to figure out why i kept hearing the motors and how to stop seeing the motor in my video. Now will this eliminate the gimbal from making that buzzing noise when in different positions?

[@mlastudioproductions]

Any tips for correct mounting of the EVO SS on an EVO Extension Rod for filming simulating crane boom movements? I've experimented using the SS facing forward of the extension rod (round portion of Gimbal is facing the ground when rod is parallel to the ground, ie: power button on the left, mode button on the right), motor up, and motor on the right, as the method used in this video runs into the SS acting funky when moving the rod with SS and GoPro from the ground level in an upward motion and causes the SS to run into it's motor stops. Would love to see a tutorial video on using the SS with the EVO Extension Rods.

[@justinpirini7084]

you are a freakin legend mate !!!! i am a trail runner and always wanted to get my viewable video of my trail runs ... been racking my brain for ideas to totally secure my gimble to my body with out getting that whipping action making gopro cam footage still unviewable ... and im gonna go get one and see how it goes for trail running ... will let you know how it went

[@MikeDancy]

I came for the review, I stayed for the riding :)

[@bobzybob1]

same here man....this guy is Awesome brother |||

[@whatsitwhosit]

You should also mention whether the Session 5's stabilization was on or off. I've heard it should be off since the gimbal takes care of stabilizing....so please clarify.

[@brianrichard1768]

Fantastic review. Did you have to special order the mount for the session?

[@jonathanbrazeau970]

what do you recommend for chest plate?

[@ronquay]

Nice rippin at trestle! I can't wait to get myself one of these so i can finally get some smooth footage up there myself!

[@derekmurrow5665]

This video is exactly what I was looking for. Thanks!

[@EVOGimbals_KeepItSmooth]

Hi Derek, No problem!! Glad the video was exactly what you was looking for.

[@derekmurrow5665]

Update, I'm confused? I just mounted mine rounded portion up and the footage is horrible and shaky. I am super bummed because I just did a big ride and none of the footage can be used. I also just attached it directly to my go pro chest harness with a 1/4 20 as described in the video. The footage was way worse then non rounded up in the past and not screwed directly to the chesty. It is like the Gimbal could not smooth itself out where as before mounting it different direction or having the motors up seemed to make better footage. I don't want this chest plate because it would be too hot.

[@EVOGimbals_KeepItSmooth]

Hi Derek, That is definitely strange. Can you please email us directly ([e-mail]) and I will have Jaymo take a look? Also, let us know what camera you were using. The problem with gimbals mounted to the GoPro Chest harness, or any other chest harness like it, is that the stretchy straps move and bounce like a trampoline creating a leverage "whip" of sorts onto the gimbal setup.This whip is nasty. None of these harnesses were ever designed with a Gimbal in mind. We change out all of our straps with nylon webbing so there is no bounce.That is why Jaymo uses the small roost protector. It is a firm and stable platform.It is not over heating nor cumbersome. Frankly, for the crew here, it is much more comfortable than the GoPro style chest mount which often feels like a bunch of rubber bands squeezing you torso. Anyway, give us an email and we can help find your gremlins.

[@davidrivera390]

Where can i get a 1/4-20 mount? I have the gimbal but haven’t been able to use it yet

[@KeeweeRider]

Yay ur a genius, no one in the world could tell me this, thanks man!

[@MisterDivineAdVenture]

Great tip. Holy cow. But that trail is amazing..

[@abhinavbhatt]

I recently bought an EVO SS for my Hero 5 and the footage turned out worse than without the gimbal because it would flap around too much. I'll try mounting this way. Any fix for the Hero 5 picking up the motor noise?

[@EVOGimbals_KeepItSmooth]

Hi Abhinav, Thanks for reaching out. If you continue to have issues with the footage please email us at [e-mail] and we'll look into getting that fixed. As for the Hero 5 audio issues we still recommend having the pro-tune audio set to "OFF" and the audio capture setting set to "WIND". This seems to work for most of our customers. However, this is not an issue with our gimbals, but with the new waterproof design of the Hero 5 which have a high tendency to amplify almost all background noise even in non-gimbal applications. The feedback is most prevalent in housing mounted applications on car mounts as well as gimbals. For the best audio, we highly suggest investing in an external mic. Any other questions, please let us know!

[@nofrontbrakes]

Abhinav Bhatt the sound on Hero 5's are awful. I recommend a 3 or 4, or keep the 5 and use a portable audio recorder like a Zoom with lapel mic/lavalier. Or just throw music over to mask and the Hero5 audio. Btw Evo: the SS is 5-10x better than the Feiyu WG. Killer product!

[@EVOGimbals_KeepItSmooth]

Thanks NoFrontBrakes!

[@EVOGimbals_KeepItSmooth]

We just finished up a video about motor noise......have not posted it yet....but will soon. The SS was designed prior to the release of the hero5 and hero6. We were caught by surprise with the added weight of the hero 5 and hero6. The weight difference between those and the hero4 is quite a bit.....30grams! That is simply too much to fix with firmware. When using a hero5 hero6, depending on an individuals style, you can max out the SS motors with moderate level riding/ripping/shredding. That is why I always recommend the hero Session series for this gimbal...it is balanced perfectly. So then? What to do with a hero5 or hero6. The answer is counterbalancing the roll axis. I know....this requires some DIY until we launch our counterbalance kit and the next generation of the SS. If you want to DIY it, a 14gram (ish) weight, 3M double-sided tape, adhered to the tilt axis motor will balance out the hero5 hero6 on the roll axis plane. Whew?! I hope this made sense? email customer service and we can send you some fotos to help explain further. and motor noise....???? Not to much you can do about that. Each action cam is different. The Garmin Virb audio is stellar in our gimbals.....GoPro not so much....but here is a band-aid: Make sure you GoPro has the most up to date firmware. Once camera is turned on, swipe left on the screen to expose the pro-tune menus....keep swiping left until you reach manual audio control. turn that on. choose "wind only"....then the GoPro will always choose the mic with the least amount of noise by default. The camera has three mics. It will use the one with the least amount of "wind" or junk noise.

[@nofrontbrakes]

EVO Gimbals awesome! Can’t wait to see the counterbalance kit

[@jasonrlombard]

This is exactly the information that I needed. My first several attempts yielded some pretty crappy footage. This is the kind of information that should come with the gimbal, no? Looking forward to a break in the rain to give this a shot on my local trails.

[@EVOGimbals_KeepItSmooth]

Hi Jason, We're glad this helped you! We are hoping to have more tutorial information more easily accessible to our customers upon purchase of their gimbal in the near future. Thanks for the feedback!

[@FreakyChumy]

Great thanks for the Tip bro, I was looking everywhere to reduce the sagging of the gimbal to the front since I'm using the cheappo Chinese chest mount, now I know how to make more stable.

[@tommyleong4213]

genius ! thanks very much. would your chest be exposed to hits from the bolt at the rear?

[@billkistner]

Just got my Evo SS Gimbal set up. Are you using GoPro video stabilization in addition to the gimbal?

[@EVOGimbals_KeepItSmooth]

Hi Billy, Yes, you can leave the go pros stabilization on.

[@danielsprock385]

Thanks for the great advice! your ahead of your time!

[@PatrickGuerrisi]

How do you make the bolt stay secure in the chest mount and stop the other end of the bolt from stabbing your chest . I Have A Regular GoPro Chest mount

[@PatrickGuerrisi]

What about the stuntman chest mount? I've read that's excellent for chest mount and very sturdy

[@EVOGimbals_KeepItSmooth]

Hi Patrick, We've heard good things as well from our customers.

[@PatrickGuerrisi]

@@EVOGimbals_KeepItSmooth thanks for answering. I got one more question if you don't mind..;with the gimble do you always use both axis when mtbiking?

[@BC-mh9iq]

Needed this for a while, I have a constant issue of having the motor in view... I must be damn stupid because I've never tried to this it this way. Thanks a lot Kris.

[@BC-mh9iq]

ps: note that if you own a classic GoPro (I have the Hero 4), it's motor down and one on the right, not left, unless you want your camera to be sideways.

[@EVOGimbals_KeepItSmooth]

This is all a work in progress......if anyone out there thinks they know it all, then they clearly don't know a thing. We gotta work together and share ideas to make this work. Keep up the good fight and don't ever be afraid to hit us up on customer service. We ride our bikes to work every day....MTB and Moto....living a dirty life here in the Central Oregon High Desert....happy to share what we learn and learn from you as well.

[@casiquekibra]

How does the gimbal know when you want to go north instead of south and fix to that position instead of trying to mantain the orientation from where you turned?

[@EVOGimbals_KeepItSmooth]

Hi Kibra, Can you please clarify the question?

[@casiquekibra]

@@EVOGimbals_KeepItSmooth sure! Say I have the SS attached to my chest, like in the video. I'm going down a hill on my bike (say I'm facing south) and the trail takes me on a 180° turn. How does the gimbal determine that it doesn't have to compensate the turn to keep filming towards south but instead keep the flow, follow my body and film forward to North now. I figured, instead, it would end up filming my own chest. Hope it's clear now what I'm struggling with in my head

[@EVOGimbals_KeepItSmooth]

Hi Kibra, Thanks for clarifying! The IMU sensor and the pan motor follow each other with a dead band algorithm. Hope that helps!

[@casiquekibra]

@@EVOGimbals_KeepItSmooth that's about all I needed to know. Thanks a lot!!

[@JamesChung2000]

Perfect explanation! What's the best way to store the SS gimbal when not in use? And what about during transport to the trailhead? Thanks.

[@EVOGimbals_KeepItSmooth]

Hi James, Thank you for contacting us. The best way to store the Evo SS Gimbal would be to use the box it came in. Its pretty durable, but if you would like more protection you could always use the foam insert from the original package and put it in a universal case. I hope this helps!

[@EVOGimbals_KeepItSmooth]

I usually just throw it in the little padded bag that came with your SS gimbal. I have had my SS since the day we launched it 1.5 years ago. Same gimbal.....it keeps on working.....I don't think you need to work too much about squishing it. The one thing that can effect its ability to operate well is dust. dust and dirt in the motors will cause grinding and the product will loose its smooth. make sure to blow out your SS with some compressed air if you use it in the dirt.

[@ianzimmermann2084]

My apologies....I missed one other question.....when I follow the instructions for mounting my Hero 7 Black....I cannot access the Mode/Pwr button.???? I am sure I have screwed something up....but it seemed to be the only way it fits

[@EVOGimbals_KeepItSmooth]

Hi Ian, the mode button as well as the top mic will be covered when installed in the mount. We suggest going into your camera settings and having the top record button automatically turn the camera on/off. In addition, you can use the Go Pro Capture APP to switch between modes. Lastly, you may want to look into the Go Pro Remo in order to voice activate the camera on/off. Hope that helps! Any other questions, please contact [e-mail].

[@umhiiguesslmao]

Yeah these things are definitely slick, I wanna mount it on my helmet for better a POV

[@georgesolomon5696]

How long does the battery last on the GoPro? Thanks

[@ericjacobs8119]

Anyone know where you can pick up one of those session adapters?

[@bilalahmedwrites]

Can you somehow tie Sony fdr x3000 into this thing? I know the grip is not made for a camera of that shape, but can you do a trick? Like a nylon/plastic cable tie or something?

[@jonathanbrazeau970]

curious, do I just use my normal cage for the hero sess 5 to attach to the EVO gimbal or do I need a special one? Also, what brand of chest plate did you use?

[@CreativeRamy]

I need a solution to connect the GoPro with an audio adaptor on a gimbal to a chest mount and handlebars, any suggestions ?

[@overthehillmtb6521]

Rounded portion of the base facing up.. Duh. That was the critical part I was missing. Thanks @Trail Features for the pointer, and thanks EVO standing firmly behind your product.

[@EVOGimbals_KeepItSmooth]

Glad the video helped!

[@derekmurrow5665]

Over the Hill MTB I'm confused? I just mounted mine rounded portion up and the footage is horrible and shaky. I also just attached it directly to my go pro chest harness with a 1/4 20 as described in the video. The footage was way worse then non rounded up in the past and not screwed directly to the chesty. How was your footage?

[@EVOGimbals_KeepItSmooth]

check out Jeff Lenosky Trail Boss series.....he does a stellar job with our gear using a Garmin Virb. Jeff is really good about answering questions as well.

[@IYI_G.]

In regards to the Hero 6, how would this gimbal do with this setup? Would the added weight of the GP6 cause the motors to work overtime resulting in excessive motor noise?

[@EVOGimbals_KeepItSmooth]

Hi There, The Hero 5/6 Black is larger than the past Go Pros so there is a slight weight imbalance that is noticeable when riding pretty hard. However, the majority of users will not notice this slight imbalance as it is pretty minimal. For those that want to make adjustments, we suggest adding 14 grams to the tilt motor by using wheel weights.

[@ianzimmermann2084]

EVO Gimbals I know the original was +1 yr ago but I am hoping you still monitor this thread....I just bought my Hero 7 Black and the EVO SS Gimbal. (Thank you for the informative video). A couple of questions.... a) in my package from you guys there was a Weight with a Sticky adhesive side.....and I can see from your reply to the original post...that you suggest adding it to the Tilt Motor???? Diagram please. B) I tried it out for the first time today.....and I seemed to constantly be hitting the gimbal with my knee on a climb which often knocked it out of alignment (I have it orientated as you suggested...the motors down and left.). Any suggestions? C). If using the Hero 7 BLack....do you recommend using the Hypersmooth as well?? All the videos out there seem to be 50/50 as to if it should be On vs Off. Thank you in advance....signed ‘old’ guy new to this sport.

[@rototumassi]

Awesome diy. Thanks

[@kevinvoyt]

This is an awesome tip. Thank you! Could you please recommend which 1/4 20 that you used to punch through the roost guard?

[@EVOGimbals_KeepItSmooth]

Hi Kevin, Any 1/4 20 will do!

[@EVOGimbals_KeepItSmooth]

I use a photo standard tripod "d-ring"

[@themiddleagemasher8108]

Talk to me about pairing the gimbal with the session. How do you deal with the motor hum and misc noise that the gimbal makes. ??

[@EVOGimbals_KeepItSmooth]

Hi The Middle Aged Masher, Check this out: kzbin.info/www/bejne/ip-bi4GLad2XnNk.

[@bakerdj80]

Can you share what PTZ settings you used during this video with the gimbal mounted exactly how you did? Thanks

[@EVOGimbals_KeepItSmooth]

Hi bakerdj80, We recommend setting them to motion via the app: evogimbals.zendesk.com/hc/en-us/articles/360003626394-Scene-Mode This will automatically adjust the PTZ settings.

[@TheDraugs]

Crazy footage :)

[@787downhill]

Thanks for the lessons I appreciate it!!!

[@nickvogel6115]

What is the 1/4 -20 with the large flat head you have used? 2:01

[@EVOGimbals_KeepItSmooth]

Hi Nick, You should be able to find them on Amazon. We probably have a couple extra we could sell you if you need. Reach out to us [e-mail] - you could also just use a wide diameter flat head washer with a 1/4-20 screw to get the same clamping effect

[@andymelville7807]

Hey guys just ordered my SS for mountain biking use, I’d love to buy one of those motoX roost guards, what make and model was that one and would it be available in the UK? Awesome vid my Chris

[@BenjiFactor]

I tried figuring this out for myself and I think this is what you are looking for. www.amazon.com/EVS-Resolution-Motorcross-Off-Road-Motorcycle/dp/B00973RS24

[@giddokamal]

thanks Kris for a very informative how-to video. one quesiton: the roost protector has a ridge vertically down the center. I would have thought that makes for a bad/unstable platform for the Evo base. did you file yours flat in the area of the 1/4x20 bolt prior to installing the bolt ? thanks again.

[@EVOGimbals_KeepItSmooth]

Hi There, Thanks for contacting us. Depending on the Roost (chest) protector you decide to use; it is very uncommon for any of the manufacturers to use a hard stuff plastic. Most of the companies are using a soft squishy plastic as to move with the body and squish on impact. Therefore, you don't really need to shave or "flatten" the plastic; as the simple pressure to the 1/4 20 bolt (with a flat washer on each side) will flatten and grip any ridges of curves in the chest protector.

[@EVOGimbals_KeepItSmooth]

sorry for the delay.....the plastic is so soft it just smooches into position. no custom work needed to the plastic. I use a standard photo tripod d ring.

[@NOK2014_Corfu_Activities]

I believe it is difficult to use this setup on hot climates. In the summer there's just so much sweat and I cannot imaggine what will be the situation under the plate. Keep in mind. Motor bikes go fast and provide more air flow. On the MTB while climbing had ascents it wont be Ideal unless you unmount it. Thanks!

[@mrmusic3756]

Do you have to have wifi

[@readitbooks]

Excellent video Jaymo. I just ordered my Evo today along with all the other parts to do this chest mount. Looking forward to using this to get more stock shots of MTB, Snowboarding and many other activities. Was that trail at Bachelor? If so I gotta come home to visit and drop by Evo to say hi to you and Hans. Cheers guys!!!

[@readitbooks]

Just rewatched the video and heard jaymo say Winter Park. I Gotta get over there to ride!

[@EVOGimbals_KeepItSmooth]

We'd love to have you stop by Christopher. Get in touch when you are in town.

[@themiddleagemasher8108]

Question for EVO. When I watch this video I noticed on the side of the session camera there was a sticker or some type of device can you please let us know what that sticker or device does also I’m having a hard time finding the wind only audio mode on my go pro hero five session camera as well

[@caseypeck1925]

Where is this trail? And what if it called? (Sorry if you answered it already) thank you for the video by the way.

[@PetrolFreak1098]

which size roost guard did you suggest tu buy?

[@EVOGimbals_KeepItSmooth]

Hi Geronimo, Thanks for reaching out to us. We suggest wearing a youth size roost guard. Please let us know if there is anything we can help you with in the future. Michael EVO Gimbals Support 1-866-977-6688

[@clifffeierabend7733]

Many thanks to the entire EVO staff for all the videos and chat room assistance, including the back room guys that I didn't see or communicate with directly. Made this video within two weeks of purchasing the SS Wearable and a Hero Sessions 5, and very pleased with both. Used the Stuntman chest plate which is a little smaller. kzbin.info/www/bejne/nafHZKWijJqDmck

[@jasoncatania7884]

Looking into this option to mount my SS. How is the 1/4-20 bolt secured to the roost guard so it doesn't fall out when not attached to the gimbal?

[@EVOGimbals_KeepItSmooth]

Hi Jason, The screw should be pretty snug where it won't fall out, but if you're concerned we suggest removing the screw or using a nut. Hoping that helps!

[@EVOGimbals_KeepItSmooth]

Anything will work, but we use a industry standard "tripod D-Ring" drilled thru the plate.

[@hillsidewoods]

Clearly ypur method works better thn mine which is to use my camelbk to secure a bit the chest mount. Whts the name/brand of the chest protector you use?

[@EVOGimbals_KeepItSmooth]

Hi LF PC, Thanks for reaching out. You can use any motor cross chest protector in youth size. Hope that helps!

[@EVOGimbals_KeepItSmooth]

Any moto "roost protector" will work. The one pictured is made my the moto company EVS Protection. Making a roost protector is not rocket science, so anything will work. Just make sure to get a "Roost Protector" and not a full body protective chest/back offroad protector. I use a "kids size" roost protector as they are even smaller in the chest area. On a mountain bike, you need the breathability. The Roost Protector is normally used to describe a protection piece that is chest only. It is used by motocross racers in a "clean dirt" environment. Meaning, they are racing on a track, or in a stadium, with clean dirt....no rocks, sticks, debris....nothing but high quality clean dirt. The roost protector is designed to keep the "roost" from the person in front from causing injury. In general, this protector is smaller and lighter weight than the true "offroad" body protectors.

[@willianb.6475]

LF PC I did a small modification on the original GoPro Chest support and it worked for me... kzbin.info/www/bejne/j5ublHqjqa17p9E Awesome ride dude...

[@alexanderturan5544]

@evo gimbals: what size do you wear and how big are you? On their website I only see 2 sizes: small/medium and large/XL. They have no indication of the actual size. I just bought the gimbal and I am pretty sure that it's too heavy for the original gopro chest strap.

[@mudpitboarder]

Great video ! Just got an SS. Is lock mode the best for MTB?

[@EVOGimbals_KeepItSmooth]

Hi Ati, Thanks! We suggest going with the default mode (pan follow) for MTB.

[@mudpitboarder]

EVO Gimbals thanks for the quick response. Shot the first video Saturday. Just as you stated, the chest plate is too small and slaps around, otherwise this will be a sweet setup. Sitting here ordering the roost protector. 🤙

[@KrainaYarpenna]

Hello EVO Gimbals! I have Garmin Virb Ultra 30 and for me the best options is to keep motor down and RIGHT, not left. Will it interrupt the functionality od gimbal? Thanks!

[@EVOGimbals_KeepItSmooth]

Hi Kraina, Nope, if that works best for you definitely use it that way.

[@TheRobcoakley]

Is this position the same for the hero 5? When I try it the Camera doesn't want to stay in that position and the motor strains.

[@EVOGimbals_KeepItSmooth]

Hi Rob, Thanks for reaching out. It should work for the Hero 5 as well. Can you please send us a picture of how you are setting it up?

[@EVOGimbals_KeepItSmooth]

Sorry for the delay Rob......I am going to cut and paste from an earlier reply regarding weight and balance. But first, don't be afraid to reposition the camera while the gimbal is turned on. Just grab it and hold it into the position you want, the firmware will hold and lock that position until you turn the unit off. Weight and Balance: The SS was designed prior to the release of the hero5 and hero6. We were caught by surprise with the added weight of the hero 5 and hero6. The weight difference between those and the hero4 is quite a bit.....30grams! That is simply too much to fix with firmware. When using a hero5 hero6, depending on an individuals style, you can max out the SS motors with moderate level riding/ripping/shredding. That is why I always recommend the hero Session series for this gimbal...it is balanced perfectly. So then? What to do with a hero5 or hero6. The answer is counterbalancing the roll axis. I know....this requires some DIY until we launch our counterbalance kit and the next generation of the SS. If you want to DIY it, a 14gram (ish) weight, 3M double-sided tape, adhered to the tilt axis motor will balance out the hero5 hero6 on the roll axis plane. Whew?! I hope this made sense? email customer service and we can send you some fotos to help explain further.

[@kevineland4090]

I cannot get the ss to hold this position with my Hero 4 black .......any thoughts ???

[@nathanhawkes6700]

Is there a way to make the left/right pan quicker? I have it set to motion but if you are doing a slow switch back type of climb the camera is filming off to the side and not pointed in the direct I am riding...any thoughts?

[@EVOGimbals_KeepItSmooth]

Hi Nathan, You can go into "custom" settings right below the "motion" option and play around with the values for what suits your needs. You will want to decrease the pan axis under "Control Dead Zone", and increase the pan axis under "Following Rate" and "Degree of smoothness". Hope that helps!

[@williamcleveland6426]

EVO,When positioning the gimbal in this video's orientation would the PAN axis actually be using the ROLL axis motor or does the gimbal know to swap axis on initialization in its "boot-up" orientation / position?With the motors are in the direction as described in the video and the 1/4"-20 thread towards my chest, I am actually panning with the roll axis as labeled in the manual when the gimbal is in the default orientation, 1/4"-20 thread down.By this rationale, should we modify the PAN motor settings or the roll motor settings in the method described above?

[@kevineland4090]

Cannot get this position to hold with hero 4 black ??

[@EVOGimbals_KeepItSmooth]

Hi Kevin, The same can be done when using the Hero 3/4. If you're having difficulty please email [e-mail] for more guidance.

[@kevineland4090]

EVO Gimbals, will try again ! But no luck so far ? Just spins back to its preffered orientation.

[@kevineland4090]

All works sweet this time !!!! Les Arcs - The Alps here i come !

[@EVOGimbals_KeepItSmooth]

Sweet!

[@TonyFernandezjkdjedi]

Bought the bundle...didn't come with that nice flat 1/4 20 screw you used on the chest protector...any links or could I find that at Home Depot?

[@EVOGimbals_KeepItSmooth]

Hi Tony, We don't sell that particular part, but yes you can find it at your local hardware store.

[@allenkvextreme]

4:43 you shredding these trails man

[@EVOGimbals_KeepItSmooth]

Thanks!

[@CampbellZeroOne]

I'm seriously thinking about an Evo SS for my next ski holiday. Is there a specific version that I need to order for a Session 5?

[@EVOGimbals_KeepItSmooth]

Hey Rob. The only thing you need to do is specify in your order that you want the GoPro Session Mounting Plate. Across our entire line of "ActionCamera" gimbals, the only thing that changes is the mounting plate. It is very modular and can be changed in less than 60secs. When you order you SS, we will load it with whatever mounting plate you need. Then you can order extra mounting plates for other cameras if you will be operating the gimbal with multiple cameras. Their is no other camera that works better with the SS than the Hero5 Session. So simple with great 1080p 60fps. Turn ProTune on via the GoPro app and the footage is stellar.....especially for distribution on Instagram, Facebook and KZbin.

[@CampbellZeroOne]

Thanks for getting back to me so quickly. It's great to know that I have a person at the other end who can answer any queries (unlike other brands) Have you any official distributors here in the UK or can I only buy via your website?

[@EVOGimbals_KeepItSmooth]

Hi Rob, We've got your back! 👍 We do have a new UK dealer, gripup.com. You'll want to reach out to them as that may help save a bit on shipping. Let us know if we can help you with anything else.

[@CampbellZeroOne]

Awesome! Thanks again for your time👍🏻

[@jarenmorris]

I haven't mounted my Evo SS this way but in the couple ways I've tried I tend to have issues when landing from jumps and the arms give way spinning the camera around. Are you running the stock settings on the Gimbal here, I noticed it's incredibly smooth when landing.

[@EVOGimbals_KeepItSmooth]

Hi JarenMTBs, The way the gimbal is mounted can make a huge difference. We highly suggest mounting it this way to fix those issues you mentioned.

[@jarenmorris]

Thanks for the feedback, I'll be testing it out this weekend!

[@jarenmorris]

I decided to do the standing jump test that Kris does in this video, my results are here: kzbin.info/www/bejne/oHfXgq17q7h8o8U This is with the motors on the bottom and left as shown. As you can see it's bobbing when I'm barely jumping a couple inches off the ground. What else do you recommend? This is with the GoPro 5 (hence the audio, which is set to protune, wind only), are they that much heavier than the Session's?

[@EVOGimbals_KeepItSmooth]

Hi JarenMTBs, Thanks for reaching out. Can you please provide us an image of your set up? You should not be seeing that vibration. Do you hear any motor noise in person or simply in the footage? Looking forward to hearing back!

[@jarenmorris]

Here is how I have it mounted looking top-down. imgur.com/a/LG0mJ As shown the motors are on the left and bottom. To clarify I'm not seeking a solution to the motor noise, that's a GoPro 5 issue. I'm seeking solution to the bobbing of the gimbal even when I'm landing softly from a couple inches jump like displayed in my video posted before.

[@StallerEternal]

In that possion (it is screwed to the vertical plane) my gimbal is shaking (motors i think). When i do angle 60 or 120 degrees - shaking dissapears. What can i do? Tnx

[@EVOGimbals_KeepItSmooth]

Hi Aptem, We suggest sticking to using the gimbal how it works best for you. However, if you're having issues with the unit please reach out to our support staff at [e-mail].

[@pawestyczynski4972]

Hello EVO! Is it possible to use "lock mode" while having such mount? I tried to use it because I don't want my camera to move left or right, I want only straight. Lock mode locks but no the motor that I want. Lock mode works on selfie stick perfectly but chest mount uses another configuration, as it is shown in this video. Thanks!

[@EVOGimbals_KeepItSmooth]

Hi Pawel, Lock mode would work the same whether mounted or on a selfie stick. What motors are you trying to lock? Lock mode will lock all of them. Reach out to [e-mail] for guidance on what you are trying to achieve.

[@KrainaYarpenna]

Ok small feedback. I ran some tests. When do this at home everything works fine. But in the field, when gimbal is already mounted and I want to ride - it doesn't work. That actually means that I am too dumb to use it ;) Will run some more field tests but I see the hope and the light in the tunnel! :D

[@pawestyczynski4972]

Sorry, wrote from my second account :)

[@EVOGimbals_KeepItSmooth]

haha we appreciate the humor! 😆 Let us know how we can help.

[@benc2637]

What operating mode is this filmed in?

[@EVOGimbals_KeepItSmooth]

Hi Ben C, This was done in default mode "follow mode". Any other questions, please let us know.

[@EVOGimbals_KeepItSmooth]

For any true POV....I love the Hero5 Session. Protune ON using the default Protune settings. 1080p 60fps Superview. 2.7k Superview is available on this camera as well, and technically produces better video, but most of the time my time frames and distribution channels don't really warrant the added digital real estate. Bigger resolutions exponentially slow down your post production and distribution .... always ask yourself what the goal of you shots are .... are you shooting for Discovery Channel? No? You are distributing on Instagram and Facebook? Just run 1080 :) Save the hassles.

[@JamesChung2000]

The left/right panning appears slow to center. What are the right numbers to set to make it more snappy for downhill MTB rides? Or is something wrong with my unit? Thanks!

[@EVOGimbals_KeepItSmooth]

Hi James, In order to speed up your gimbal for MTB, you'll want to select the gimbal icon in the APP, go to "scene mode" and then set it to "motion".

[@csspinner]

EVO Gimbals is there any way to make the motions setting saved by default across a power cycle of the EVO? I find I always need to reset the configuration every time I power it on

[@EVOGimbals_KeepItSmooth]

Hi Chris, Once you set the scene mode to "motion" it will automatically save that setting across a power cycle. However, if you are doing a custom setting you want to ensure to scroll down and click "save" in order for the changes to save.

[@Projectnortheast]

Evo gimbals I have tried doing a custom pan speed, but seems when set to "motion" it's capped at 120 pan speed? So, the motion mode is as high as it can go? it still doesn't pan as fast as I would like for mtbing through berms

[@EVOGimbals_KeepItSmooth]

Hi, yes the speed is capped at 120.

[@MTBXterra]

I use the SS and Session as well. I was wondering if you or anyone else has been able to eliminate the sound of the gimbal motors? I could hear it in your video some even with the music and without music it is really irritating. I have to use a second gopro not in a gimbal for sound or record the sound with my phone. Thanks!

[@EVOGimbals_KeepItSmooth]

Hi Robert, You definitely will pick up windspeed noise which is what we believe you are hearing in our video. We suggest using an external mic for the best audio as that will eliminate the use of a second unit. Hope this helps! Any other questions, please let us know.

[@MTBXterra]

I appreciate the response. The noise is from the gimbal motors and is a different sound than the wind noise. I have the Session 4 so external mics are not an option. I had thought about maybe adding felt to the inside of the session's cage to dapen the noise. I think most of it is transferred through the gimbal arm and session's cage. I know all gimbals will have some motor noise, but I think with the session it is a little more than normal. Wind noise I can deal with, the higher pitched motor noise is the problem. I think most GoPro users do use an external mic anyway.

[@EVOGimbals_KeepItSmooth]

Hi Robert, If you are getting minor motor noise you can remove it using a denoiser in Premier Pro. We also suggest changing your audio capture setting set to "WIND". Let's hope that does the trick!

[@MTBXterra]

Thanks! I will try that. I love my SS Gimbal!

[@liampalmer7825]

What is the best opperating system for moutain biking follow lock or full ?

[@EVOGimbals_KeepItSmooth]

Hi Liam, You'll want to go will Pan Follow (default mode). Hope this helps!

[@liampalmer7825]

Ok thank you

[@liampalmer7825]

Hi i have on other question where did u get the youth moto chest plate i live in new Zealand

[@liampalmer7825]

They dont sell them here

[@alexanderturan5544]

@EVO Gimbals Do you guys have any seller in Germany or Switzerland? I'd love to buy the EVO SS, but getting it from the US could cause as much trouble as getting some Chinese competition in case of some problems (warranty). Thank you!

[@EVOGimbals_KeepItSmooth]

Alexander Turan we actually have stock now in Amazon UK goo.gl/ceNRya. For warranty and repair we have a partner warehouse now in Germany that can handle returns and repair so do not worry! 👍

[@alexanderturan5544]

Well, that makes it 100 bucks more expensive than in the US, since it costs GBP 279 :-( (=CHF368, but the US price is CHF264). Guys, please make some reasonable deal with someone in Germany or Switzerland. Germany, Switzerland & Austria is a 100 million people market, you should not be missing here...

[@EVOGimbals_KeepItSmooth]

Alexander Turan the MAP pricing in Amazon UK includes VAT

[@craigmerriman5871]

Anyone else have massive motor noise with the SS? I use a gopro hero 4 and the nat sound is totally useless due to the surprisingly loud motors.

[@farmgardenwithbobbo9584]

Does Evo Gimbals, have any plans coming out with a waterproof wearable gimbal, anytime soon?

[@farmgardenwithbobbo9584]

for example, mounting it to my dogs, they like to run through the hose or sprinkler, jump in the kiddy pool, dock jump and swim back and run through tall wet grass

[@sendsend]

Hollywood movie standard!

[@brundimisfits5066]

Can i buy EVO SS somewhere in Europe maybe?

[@EVOGimbals_KeepItSmooth]

Rok Cunder Yes here -> goo.gl/mF5QHY

[@brundimisfits5066]

Unfortunately they don't ship to Slovenia :(

[@EVOGimbals_KeepItSmooth]

Rok Cunder email us your shipping information to [e-mail] and we will check to see if there are other options for you 👍

[@brundimisfits5066]

Thank you very much, i send mail :)

[@mobettah]

Hey great video. I did realize something that is pretty important though through some trial and error. At 4:02 Kris says to hold the camera in position until the gimbal motors engaged. If you don't do this the camera will end up pointing towards you! If you re-orient the camera so it is facing out, you end up with only about 40 degrees of tilt before the gimbal hits the motor stop. the result is a clunking noise like this! www.dropbox.com/preview/External/Evo%20Gimbal%20Issue.mp4?role=personal I watched the video several times and it clicked that if you hold the camera in position you will get the full range of tilt function and no clunk!

[@EVOGimbals_KeepItSmooth]

Hi mobettah, That's a great piece of information!! We weren't able to open that file you shared. Can you please try sharing a public link on here or to [e-mail]? Thanks in advance!

[@mobettah]

Here try this link. I added it to my KZbin channel.... kzbin.info/www/bejne/n4OWg6KgfKysrsk You should be able to see this. I am working on an additional video showing the cause and solution. When it is up, I will post that if you like.

[@EVOGimbals_KeepItSmooth]

That'd be great!

[@reubenbishop8320]

where is Kris riding for this video?

[@EVOGimbals_KeepItSmooth]

Hi Reuben, Thanks for reaching out to us. The trail Kris is riding is in Winterpark, Colorado and it is called "cruel and unusual". If you have any other questions, please reach back out.

[@EVOGimbals_KeepItSmooth]

Winterpark colorado....

[@TonyFernandezjkdjedi]

Just a head up guys..major motor noise with this combo..and with the Session not having sound settings your basically screwed.

[@HugDeeznueces]

Is this dude the CEO?

[@TonyFernandezjkdjedi]

MAy I ask...how old is this Cat!? He's one bad dude!!

[@Arrowflyer2]

Do you think that gimbal would work underneath my airplane?

[@EVOGimbals_KeepItSmooth]

Hi There, Thanks for contacting us. Our gimbals have a max windspeed of 55MPH. Depending on the type of airplane you have, if you are planning on going faster than this speed, we do not recommend it.

[@logandrayson4175]

I don’t get how you guys can’t include a 1/4 20 mount for the top three action cams instead you include a selfie stick? Granted the above option is a good idea if you want to Jerry rig something. You spent all that time creating something awesome why not include the necessary hardware to make it an ACTION camera gimbal?

[@chavoxo50]

Thank you for the video. Unfortunately the plate for that body strap is WAY too big. I wouldn’t do one climb with that on. Check out a KZbinr called BKXC. He uses an evo mounted on a gopro chesty. No one is putting out quality mountain bike vids at this cat’s level. It can be done

[@EVOGimbals_KeepItSmooth]

Thanks Charlie. Here is my take on the GoPro Chest plate. I answered this question earlier in this thread....so pardon my "cut and paste" here on your question. The GoPro Chesty is a bit out dated at this point. When it was designed many years back, nobody thought about mounting a gimbal to it.....this was prior to Karma Grip as well. The problem begins with the elastic straps.....no matter how tight you make them, they turn the chesty into bungee jumper with the added weight of a gimbal. Simply too much whip going on. The added G forces and whip will not allow any gimbal to properly function. If you choose to use the GoPro QR system and finger tabs....you are only adding more swing leverage by moving the weight outward, further from the chest.....creating even more whipping. If you want to use your existing GoPro Chesty, remove the over shoulder elastic and replace it with firm nylon webbing....eliminating the bounce and bungee effect.

[@kotktorychodzipogowieadama2645]

301i

[@bobzybob1]

Awareness |||

[@blitzkrieg9414]

fk that How do I mount this to a dirtbike helmet without it getting ripped off w the first branch?????????

[@EVOGimbals_KeepItSmooth]

bLitzKrieg it’s best to mount it on your chest especially if your riding tight single track in the woods.

[@bikeadventurer]

This is hands down the worst product I have ever bought. It doesn't work as advertised, the camera keeps flipping upside down whenever I move or turning to face me and on top of that all of my calls to their corporate number and to their support email have gone completely unanswered. I am completely disgusted with this product. Waste of money, do not buy!!

[@RheaAyase]

You don't have many women in your company, do you. Diversity brings better products. We can't wear a plate on chest. Been looking for a good solution for years.

[@pawestyczynski4972]

There are chest mounts for women, google it :)