The Best Way to Strip Rust, Paint and Filler + Prep Your Bare Metal for Primer - Contour SCT

[@eastwoodco]

ALL of those cool new drums for the Contour SCT are now in stock! Click the link in the video or description to visit eastwood.com!

[@lazzyrj1]

This tool would be awesome for motorcycle shops . I regret getting my huge $2000.00 media blaster now. For a bike shop it would do quick work on tanks ,fenders & bags .

[@mortier9]

A dust-collection attachment would be nice to avoid throwing (lead-base?) paint dust around.

[@Mondo_0ne]

Use a respirator

[@1967davethewave]

Are you using this to strip the paint in an old house? I don't think cars have used lead based paint since the 1920's.

[@shotfirer1972]

Please come to Australia and sell us convicts some of these handy tools!! Waiting....

[@eastwoodco]

Here's a couple distributors down under: Impact Sales www.restosupplies.com & Permanent Painted Coatings www.ppcco.com.au

[@charliesmith9528]

So im 65 and i knew better as ive painted many cars and trucks but it has been years,,,i attempted to sand down my silverado so i could apply some olive drab paint to and camo paint,,,all went well except for front drivers panel fender which i used a 7 inch sander with 220 but had it turned all the way on high,,it tookj off paint but not evenly..when i applied primer earlier it shows all the high and low spots,,it looks awful,,reast of truck is perfect and ready for paint,,,WHAT is easist best way to strip down to bare metal,,i have a red harbor freight sandblaster but have never used it,,i used aircraft remover 30 years ago and it was awful mess...please advise asap

[@coreykeele9781]

What about a deal to purchase several drums to try on different areas?

[@TheThirdWheel618]

That wire drum would be handy stripping a truck tailgate with all the uneven surfaces..

[@tcbridges]

Wanted to know how this would work on a fiberglass boat. and what sanding wheels you would use. Please explain in detail to me

[@eastwoodco]

Would not recommend for fiberglass. You could try one of the less abrasive wheels, which should be available this week at Eastwood.com. But test an area that isn't visible before trying to do anything to the car. This tool could easily remove the fiberglass. Always wear proper safety protection.

[@richfarfugnuven6308]

Eastwood Company you guys have a cool company.

[@MrMrBigro]

Is there place in Calgary Alberta where I can buy that tool thanks

[@ssbrutal]

we've seen this at least 3 or 4 times now

[@NihadH]

Is the treated bare metal surface scuffed thoroughly so that a bare to metal primer can adhere strongly? The treated surface appears to be rather polished to me. That is the exact opposite of desired (and to what sand blasting leaves behind).

[@eastwoodco]

Yes, the surface is scuffed for primer. There are many different drums and sanding bands available here: search.eastwood.com/search?ts=custom&w=contour%20sct

[@larryhuddleston7301]

how about a price quote

[@scottlangton896]

is the handle on backwards???

[@manoofi]

International sales?

[@eastwoodco]

www.eastwood.com/collapse-test

[@RatsnestHotrods]

Kick ass!

[@TheMarcusGomez]

need steel wire brush style drum!

[@rodncycle]

220v?

[@ryans2kidz]

Why don't you show how this tool gets into crevices and other areas that aren't completely flat?

[@nunyayourbusiness7327]

will it sand down bondo

[@eastwoodco]

It will quickly remove bondo.

[@scolaighe]

Red drum, red drum...

[@truebluebears76]

The best way to sell a stripper

[@Dolla-Bill]

Aircraft stripper is so much easier

[@ReactionASMR]

Air craft stripper has become weak now days though

[@bartlemy]

Hello

[@jedibarracuda8412]

Bartlemy hi :)

[@bartlemy]

Just want to say I enjoyed the live session and will definitely be looking at your ;product range in the future. Great tools and they look very well made as well. Cheers