The Big Moment | First Engine Start Attempt VR6 3.2 Volkswagen Caddy MK1

The Big Moment | First Engine Start Attempt VR6 3.2 Volkswagen Caddy MK1 - Episode 20

Рет қаралды 35,077

Күн бұрын

Get ready for the moment we've all been waiting for in the Caddy MK1 transformation journey! 🚗💨 In this exciting episode, we gear up for the first start of the VR6-powered Caddy. From sorting out the oil cooler, fitting the radiator and coolant hoses , and revealing the final colour of the air intake manifold. All in preparation for the first start.
🛠️ Products Used in this Episode:
Radiator : Made by Creative aluminium fabrications
Oil cooler: www.heritagepa...
Don't miss a beat of the action! Follow my Instagram & TikTok for exclusive teasers and behind-the-scenes updates
Instagram: @Zaksgarage
TikTok: @Zaksgarage
👍 If you're as excited as I am about this big moment, hit the Like button, share the video, and subscribe to the channel. Your support fuels this project and keeps the adrenaline pumping!
Thanks for being an important part of this epic VR6 engine installation adventure. Stay tuned for more exhilarating updates on the Caddy MK1 transformation! 🛠️🚀
#CaddyMK1 #VR6Engine #AutomotiveAdventure

Пікірлер: 72

@preneshpakkiri5565 5 ай бұрын

Top notch workmanship buddy lots of love from south Africa Johannesburg

@lwandolize 5 ай бұрын

Excellent effort, buddy. Lots of love from South Africa. Cape Town

@KevinBennett-wc9ec 5 ай бұрын

Hi on ur engine harness more towards the starter there's a connector which requires a earth and ignition power as well

@preneshpakkiri5565 5 ай бұрын

Respect buddy awesome stuff and lots of love from south Africa Johannesburg

@davedulansey6207 5 ай бұрын

You got it Brother! The issue will reveal itself soon enough. Beautiful build!!

@gabrieljunior8096 5 ай бұрын

Did you do the immobilizer delete on the ecu?

@sharki23 5 ай бұрын

The engine will start for a second and then shut down if the ecu is not de-immobilised

@the2idiots380 5 ай бұрын

Definitely immobiliser if fuel pump is not priming neither is it sparking I had same problem when I did engine swap on my golf car won’t necessarily even fire if it’s immobilised

@tsholofelompati1182 5 ай бұрын

😅😊@@sharki23

@d1specdrifter 5 ай бұрын

I had a vt6 engine in my 90s corrado. A great engine choice indeed.

@MuslimTrucker 5 ай бұрын

Love the colour of the manifold !!!

@markbowden7238 5 ай бұрын

Someone built a swapped Mk1 focus with a 6.7 supercharged v8 and rear wheel drive, well okay but? It sure was a ton of work and a ton of effort and... fast in a straight line. Could also have been - - front mid front drive - rear mid rear drive - front mid AWD - rear mid AWD Think about the Fiat 128 and X1/9 - they just moved the engine and transaxle from front to mid and designed a 2 seat body around it. So if you make a Caddy mid engine rear wheel drive, the body basically looks too long or not wide enough. But if you moved the rear axle back a little, widened the track and lowered it, it would be nuts. The reason is because a Caddy is very light at the back, and is a cab forward layout in some ways not dissimilar to a mid engine car with 4 seats for example a Dino 308GT4 (ferrari)

@luisluis-w4j 4 ай бұрын

eres todo un artista saludos

@CyberDunk2077 5 ай бұрын

Looking REALLY nice! That thing is going to go like a rocket for sure, good job you got the 1000bhp rocket oil. 😆

@nickyna9960 5 ай бұрын

Perfect color choice for the air intake manifold. I suggest that you maybe double check the Engine Timing.

@jasonaldred-lg2jk 5 ай бұрын

Quality work done right well done.

@d1specdrifter 5 ай бұрын

Been a sub since your 1st 1k subs. The project is awesome yo. Keep up the great work.👍🏼👍🏼🤜🏼🤛🏼👏🏼👏🏼😁🍻

@ccm-racing 5 ай бұрын

Quality job bro. Proper resto mod 👌🏻

@hhmediaza 5 ай бұрын

Sick brother!

@mileschapman4137 5 ай бұрын

looking great

@lucasngwenya6713 5 ай бұрын

Mine was a dead crank sensor, you can also check whether your ecu is decoded/open

@judhillman3518 5 ай бұрын

Needs de-mobilising on ECU, you’re using mk1 clocks (VR are coded) and mk1 key with no immobiliser ring. K line wants wiring in to pin 43 from memory so you can connect to obd. Have you connected brake switch/clutch switch?

@Notsofunnychef 5 ай бұрын

You should have way more subs. Honestly love this build, great engine my mate had 3.2 v6 in a mk1 golf went like shit off a shovel. It could be the mobiliser? Hope you get it sorted fella.

@danielhenriksen6797 5 ай бұрын

The fuelpump rele is broken, the same rele are for the ignition. Change that and i bet it will start up. I had the same problem :)

@danielthomas1735 5 ай бұрын

I need to do this to my Passat B3 👏🏻

@upnorthrc 5 ай бұрын

Seems like a vats issue similar to an ls swap? Everything got switched, so the ecu thinks the car was stolen? Good luck and beautiful build

@maqmia3379 5 ай бұрын

REOMVE THE Immobilizer THE Car Will Start or use the audi tt ignition with key n cluster if you don't want to remove the immobilizer

@Martin.ac.85 5 ай бұрын

Try to access the ECU on a bench to make sure that there is no issue with it.

@zaksgarage 5 ай бұрын

I think that’s the next step, just got to figure out how to do it

@Martin.ac.85 5 ай бұрын

@@zaksgarage I would assume that you need to get 12Vs, grounds, CAN lines and maybe something else. Just the same things it gets when powered on and plugged in the OBD2 port. Good luck! Awesome build

@ccm-racing 5 ай бұрын

Did the donor car have an immobiliser? If so you will need the receiver coil connected on the ignition barrel with the correct key to get it to disarm

@PreshanDieselMac 5 ай бұрын

I want to do this swop on my mk1...I'm a qualified diesel mechanic, just need to find a good donor car...

@keithmccrudden6681 5 ай бұрын

Have you had the immobiliser turned off? Sounds like no spark

@markbooysen9412 5 ай бұрын

Are you supplying enough power to the ecu?

@sibusisomasimola7100 Ай бұрын

What type of gearbox are you using

@runningvalver 5 ай бұрын

Black/white wire on the left on the ECU wires from car doesn't have a live or cranking is dropping the voltage too much.

@mao_gwam 5 ай бұрын

Transponder chip in the key use the audi 1

@ZIGZAGmotorsport 5 ай бұрын

Mashallah brother iam comenting my hands are still hurting everyday working learning doing the work with heart and soul like everyone should do we alwasys have moments like this something not working inshallah u find and fix it soon can’t wait for the first startup is like first breath of a baby 🤲🏻👨🏻‍🔧👋

@sydneypauley3187 5 ай бұрын

No spark.

@preneshpakkiri5565 5 ай бұрын

We need more content please buddy lots of love from south Africa Johannesburg 🇿🇦

@bart_langedijk 5 ай бұрын

I'm pretty sure you have a power/ground issue. I don't hear any throttle bottle when the ignition is on (not cranking). Pin 1/2 ground, Pin 3 switched power, Pin 21/62 constant power. Make sure you also have power (pin 16)/ground (pin 4/5) on the OBD port

@joelb2660 5 ай бұрын

Great colour choice for the inlet. One thing I would suggest is to beef up your earth to the battery. I have a battery relocation in the same place and I had starting issues. Swapped the earth wire out for a beefier one and it was fine. For your starting issues double check the ecu plugs are properly done up. It’s weird you can’t see the ecu at all. So the basics are a good place to start.

@Michael-s1q8x 5 ай бұрын

Respect! Keep at it my mate. From watching your videos and seeing your not just some humble mechanic, you have a philosopher's soul. I have faith You'll work it out! In your own humble way 😁 Nice work too.

@Taelo04 5 ай бұрын

The Quality of your content reminds me that of Mat Amstrong. I guess you kinda do the same job

@StanleyKubick1 5 ай бұрын

chugging along nicely, congrats mate. If you have cooling issues down the road, I'm sure a fan shroud would go a long way in addressing them

@downnoutmotors 5 ай бұрын

Mate is coming along nicely and had my fingers crossed for the first start.. I keep thinking immobiliser unless you had that removed from the ecu?

@nidahkhan4501 5 ай бұрын

The Intake manifold look sick 🔥

@jeffkugener 5 ай бұрын

Hey, i have the same issue on my vr6 2.8. I have change the realy 109 to make run the fuelpump. Second, i have a red/yello cable on my vr6 engline loom, you need to put theme on the 12v igniton, to open fuel rail an sparks. Look if u have that also

@cocau251 5 ай бұрын

Hi! Could be the immobilizer signal? Or the +15 to ecu... I greet you from Italy!

@lloydnkambule9018 5 ай бұрын

Not sure on a vr6 but on my Mk1 when it did that i did the engine timing Crank, CAM, V-belt, distrubutor, not sure how the build is like that side #Lloyd from South africa

@glenkellaway4664 5 ай бұрын

If ur getting no communication on vcds it’s the can wire issue ur grounds u have used didn’t seem to be on bare metal may be wrong there but from the angles looked like u put them straight to paint

@nnzenirasibendele5988 5 ай бұрын

Love everything about this series, love every R32 R36 build video on the tube

@GaryBax 5 ай бұрын

Is the power to the ecu being supplied on cranking? Or just on ignition live ?

@kylegalvin3513 5 ай бұрын

As much as we want to do everything ourself, sometimes we need some help... call in a auto elec and go from there

@theundecidedhobbyist9634 5 ай бұрын

Hi all the way from South Africa. Could be ecu needs decoding. Becase should read from a transponder key. If that all good then check your ignition could be giving power whe on but cuts off when cranking.

@KevinBennett-wc9ec 5 ай бұрын

would u mind sharing ur diagrams if possible