The Black Pearl model ship - part 1 - The plans | Scratch build from plans wooden model ship

[@AhmadSyed-o4o]

How to download black pearl plan..can I get the link

[@willwilco]

I too am looking forward to watching your build and seeing the plans. I am still trying to learn how to read the profile, sheer and half-breadth, after and fore body sections plans to create frames and other parts of the ship.

[@ModelShips]

This was a bit easier than that, since i had Mellpapa's plans to start from

[@l6gaming]

looking forward to the build, be interesting to see how you do the internals, my next build will be HMS Bounty with cutout and internals.

[@zvSoulEatervz]

wow this is awsome. i recently got my hachette black pearl from the attic and i noticed the skeleton of my build had been water damaged. i was wondering if these plans would work with hachette. this is awsome and keep up the work !

[@ModelShips]

I dont think this will match the hacchete kit, the scale should be very close but I think the ribs are in different positions

[@zvSoulEatervz]

@@ModelShips thank you so much for your reply. ive only scimmed across your vids of this ship build and wow i am amazed !

[@ModelShips]

@@zvSoulEatervz thabk you!

[@sorinul75]

Very beautiful and ambitious project. I look forward to see its evolution in time. Keep up the good work! :)

[@MykRacing450X]

I am happy to see this get started!! Great looking parts!! :)

[@anketkamtekar]

owsome work 👌👌👌👌

[@drawmaster_yt]

Las piezas del minuto 8:23 no me aparecen el link de descarga de los planos amigo

[@ModelShips]

the drawings were reorganised but all the pieces are on the plans

[@conanleomarxleopoldo6505]

Deserves a sub and like ❤

[@rikertronic8066]

Looked like an early Christmas present as you unwrapped those laser cut parts. I tried with some parts myself but my coping saw skills were sorely tested and i failed. Plywood was too fragile and myself too impatient! My Revell Black Pearl will become a hybrid plastic and wooden, lighted vessel. But i am excited your project is starting as i know it will be an epic build. one point though. did ships of that time have anti-foul substances on their lower hulls?

[@ModelShips]

There are reports of lead seating going back to 4th century BC, some Spanish ships have been reported to have used lead sheeting very early on, overall, and because we can't consider those a common practice, the time line although not linear is something like, tree resin and talow mix, then thin wood sheeting on top of a layer of hair and a layer of tar, then lead sheeting. Then different "graving" mixtures. And eventually the copper plating, if we consider the black pearl date early 18th century, most likely it would have some form of graving, maybe tar pitch and brimstone mix, but some graving compounds descriptions are as accurate as "a composition of spiritual and corporeal ingridients" so you try to guess what was in it. But yes there's always been some sort of attempt to protect the hulls somehow

[@rikertronic8066]

@@ModelShips Thanks for that. I was never quite sure and the more i looked for information the foggier that information became. Although the "Pearl" was down with Davy Jones for some time!

[@aaronpi]

Following the construction of Mexico, I intend to make mine following your videos, same scale as soon as the plans are released, I am trying to do mine in AUTOCAD but it is getting a bit complicated.

[@toritoradioactivo4657]

amazing video. I will see all the list. How can I have your modified plans and the accessories you made.

[@johnmarshall4156]

Looking forward to this, any pointers for someone wanting to attempt a first build (me)?

[@prototypep4]

Yes, go grab one of the 2 beginner kits from Vangaurd models. Chris Watton the owner has designed 2 different high end Victory models, one for Caldercraft and the other for Amati (still in prototyping) he's also done many other kits before starting Vangard. His approach to kit building is very easy for the beginner to learn the skills for more complex builds. I started with his Alert kit, but that was before he had his beginner kits available and the Alert is still not very difficult really with how he designs them.

[@ModelShips]

I would go for something with double planking on the hull, more forgiving, think the hull is what makes most people loose interest in a model, with double planking you can train the planking, use filler on the mistakes and cover it with the second planking that is thin and easy to deal with, thechnically you can get any model and buy thin strips for double planking even if it doesn't come originally with the kit

[@johnmarshall4156]

@@prototypep4 thanks for this

[@prototypep4]

@@johnmarshall4156 no problem mate, seen too many people start with models that require way too steep a learning curve or poor instructions and give up. Starting with really good kits even if they're not the ships you eventually want to build just to learn the skills helps a lot more.

[@ghettojohnny]

Are the models sold as a kit? Or do you have to take the plans and cut them yourself?

[@ModelShips]

I made the plans based on pre existing ones and then @modelmaker did the laser cutting for me

[@ModelShips]

here is the proper link for him kzbin.info/door/YG55pZqjXX0doBHjUp6_FA

[@ghettojohnny]

Thank you for the link. Have you done any other ships like The Flying Dutchman? I'll try and contact him to see if he can cut me some pieces. Thank again.

[@ModelShips]

@@ghettojohnny Flying Duchman is what i plan on doing after finishing the black pearl

[@bookworm315]

What's program you use?

[@ModelShips]

I was using Adobe illustrator

[@sergiocobo6000]

After the amazing Santisima Trinidad no doubt this will be spectacular. Maybe later on you can let me know how much for your "kit".

[@ModelShips]

I wi release the plans for free

[@jallabalaraju6844]

@@ModelShips please give me plan's sir

[@randallart1313]

I would love a copy

[@ModelShips]

I will release them once I know the fittings are good enough

[@randallart1313]

@@ModelShips thank you brother

[@jojejorge3690]

nice work where can you download your ship building blueprint tanks

[@ModelShips]

My Black Pearl plans are available now tinyurl.com/mpt5u435

[@fernandogarcia148]

@@ModelShipsHello. This is great that you shared your plans. Thanks a lot. How long is the false quill in on your plans? Is it a 1:48 scale? Thanks again

[@catalinjoitescu4033]

Where did you order the parts??

[@ModelShips]

Good friend made them for me www.youtube.com/@MykRacing450X/featured

[@bogumijurczuk2757]

Is there any chance of getting these plans for co2 laser ??

[@ModelShips]

once i've checked and fixed a few mistakes i've already found

[@bogumijurczuk2757]

@@ModelShips Ok then i'll wait :):)

[@nikolayalabanco6539]

Would you share your layouts on sheets for laser printing please?

[@ModelShips]

As soon as i finish the last corrections on it, some things need to be reworked

[@nikolayalabanco6539]

Would you mention where did you laser cut parts. What labs to search or what to provide them in order to have those parts cut?

[@joanmanueloliverovira4073]

💪🏻💪🏻💪🏻💪🏻👏🏻👏🏻👏🏻

[@ДимаШконда]

здорово...класс

[@ishara7699]

how to download the black parl ship plan please give me the link😔

[@ModelShips]

My Black Pearl plans are available now tinyurl.com/mpt5u435

[@minhduongtran]

@@ModelShipscan u pls tell me which size of paper that you print the plan.

[@haboshabos6239]

i watched your previous work and i learned many things..this one, i saw the plans and i will try to make my second ship..can i use jpeg for laser cut?..thanks for everything

[@ModelShips]

It depends on the software that will be used along with the cutter, but yes, most will work with jpeg

[@donholdren-w9d]

ty vermucmy

[@jojejorge3690]

where can i 😁

[@ModelShips]

My Black Pearl plans are available now tinyurl.com/mpt5u435

[@aussiefrenchman-hobbytable9960]

😊😊😊👍👍👏👏👏

[@hanguyenthanh8814]

i thank you very much if you send me the vector file (adobe illustrator)

[@davidkajan176]

Hello there I want to build this model as well. Do you have this drawing plans?? Could you send it to me trough email??

[@ModelShips]

My Black Pearl plans are available now tinyurl.com/mpt5u435

[@killerlyric3574]

from Scratch?

[@ModelShips]

Yes, from scratch

[@prototypep4]

It's worth noting there is a chinese kit on offer from company ZHL. There is one kit of theirs based off these plans (their first version) the other two, more popular, offerings are complete copies of the Amati/Hachette release which was also worked on by Chris Watton. I'd emplore anyone with integrity to never purchase or support IP theft in this hobby. Do not support chinese kit manufacturers who steal designs from others. (ZHL have stolen many other plans from a lot of designers)

[@CWSOF]

Oh really? I really thought that ZHL plans were original since I never found anyone with the same plans, especially the ribs. These ones shared in this video are different from ZHL, I know it cuz I've been trying to build my pearl from ZHL's plans that they shared in their facebook profile, but I just couldn't cuz their drawings are not in the proper size between them. There's another japanese plan which we can easily find on the google, but the ribs are all wrong, I showed them to ZHL owner and he confirmed that the ribs are wrong and then he claimed that his own are correct and original.

[@TheRichardgomm]

So it's not a scratch build.

[@ModelShips]

It is a scratch build, I even made the plans

[@ГурбангулыДубдагдыев]

SC model?

[@ModelShips]

What does SC mean?

[@ГурбангулыДубдагдыев]

@@ModelShips china brend

[@ModelShips]

@@ГурбангулыДубдагдыев this is scratch build, from my plans, it's not any kit from any brand

[@ГурбангулыДубдагдыев]

@@ModelShips ok, sorry

[@ModelShips]

@@ГурбангулыДубдагдыев No problem