The Corsair 4000D Airflow Review - What You Need To Know

This is a short video on the Corsair 4000D Airflow to talk about the pros and cons of the case. The problems of setup and what I liked about it.
Do you want to know everything there is to know about the Corsair 4000D Airflow? Well, watch this video and be sure to check out the build guide. In this review, I'll take a look at what this computer case is all about, and tell you everything you need to know about its any airflow problems.
If you're looking for a new gaming computer case, the Corsair 4000D Airflow is a great choice. But be sure to watch this review before making your purchase, so you know what to expect.
See my full unboxing of the 4000D Airflow here - • Corsair 4000D Airflow ...
See the Corsair Airflow 4000D Here (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available):
Amazon US - amzn.to/3izrmtT
Corsair - go.corsair.com/Wq62xe
NewEgg - newegg.io/nc7a9aedb5
Best Buy - bestbuy.7tiv.net/EQyaD
Amazon UK - amzn.to/33p39QI
Amazon CA - amzn.to/33s7sut
Amazon DE - amzn.to/35A1xGw
Amazon FR - amzn.to/2FCw4bS
Amazon IT - amzn.to/33s7vGF
Highlights of the 4000D include:
- Easy clean removable mesh dust covers
- A front high-airflow panel for max airflow with great style
- Brilliant cable management channelling and loads of cable hooks
- Potential for up to 6 x 120mm fans
- Easy removable side panels
- Nice looking PSU shroud
- Multiple SSD mounting locations
- Vertical GPU mounting is possible
Lowlights:
- Frustrating HDD tray location
- Push/pull setup is impossible due to PSU shroud size
Corsair 4000D pros and cons • The Corsair 4000D Airf...
Technical specs of the case:
Dimensions 453mm x 230mm x 466mm / 17.83" x 9.06" x 18.35"
Product Weight 7.85kg / 17.31 lbs
Material Steel, Plastic, Tempered Glass
PCI Slots 7 horizontal, 2 vertical
MB Compatibility MITX, MATX, ATX, EATX (305mm x 277mm)
HDDs 2 combo trays (3.5”, 2.5”)
SSDs 2 trays
Fan Support
Front: 3x 120mm/ 2x 140mm (1x 120mm Included)
Top: 2x 120mm/ 2x 140mm
Rear: 1x 120mm (1x 120mm Included)
Front Radiator 360 / 280mm
Top Radiator
280mm w/ CORSAIR VENGEANCE LPX only
240mm w/ ALL CORSAIR DRAM
Rear Radiator 120mm
Included Fans 2x 120mm fans with AirGuide technology
Left Side Panel Full Tempered Glass
Right Side Panel Solid
Front Panel Steel
PSU Cover Yes
PSU Length 180mm
GPU Length 360mm
CPU Cooler Height 170mm
Rear cable space 25mm
Dust Filters Front, Top, PSU
Front I/O 1x USB 3.0, 1x USB 3.1 Type C, 1x Microphone/Audio, Power, Reset
Specs of this build:
MSI Meg Z940 Ace motherboard
Intel Core i7 10700K CPU
32 GB Corsair Dominator Platinum RGB
Corsair RM850X PSU - • Corsair RM850x white P...
ML120 Pro RGB fans triple pack (for case extra fans)
MSI Triforce 2070 Super GPU
WD_Black SN750 NVMe SSD - • WD Black SN750 - how t...
Corsair iCue H150i Elite Capillex AIO • Corsair iCue H150i Eli...
Gamer's Nexus video on AIO mounting - • Stop Doing It Wrong: H...
Big thanks to my super awesome KZbin members:
Meatykeyboard!
Rawrr483!
Come check me out on Twitch - / provokedprawn
Support the channel:
See the benefits of being a member here - / @theprovokedprawn
Streamlabs - streamlabs.com/theprovokedpra...
Get some merch - teespring.com/stores/the-prov...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
PLEASE NOTE
Affiliate links:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions.
Outro music:
Home Base Groove by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@TheProvokedPrawn]

See the Corsair Airflow 4000D Here (note these are affiliate links that earn me a commission at no extra cost to you, other retailers are available): Amazon US - amzn.to/3izrmtT Corsair - go.corsair.com/Wq62xe NewEgg - newegg.io/nc7a9aedb5 Best Buy - bestbuy.7tiv.net/EQyaD Amazon UK - amzn.to/33p39QI Amazon CA - amzn.to/33s7sut Amazon DE - amzn.to/35A1xGw Amazon FR - amzn.to/2FCw4bS Amazon IT - amzn.to/33s7vGF

[@rainesubnaut5918]

Thanks for doing such a well explained breakdown of the case, I've had my Corsair 220t for almost a year now and I'm very attached to it, but it lacks clearance for larger GPUs and so I've had my eye on this one as a replacement. Sounds like it's the one for me! Gonna have to go check out your unboxing

[@TheProvokedPrawn]

Thanks. Hopefully it's useful enough that you subscribed!

[@doubleagent1851]

Same I love my 220t I just wish the bottom gpu power cord access was a bit bigger for an additional 4 pin power cable (I use custom sleeved cables) for the new rtx cards that require it

[@n3lls81]

This is the most relaxing case review/build I've ever watched.

[@TheProvokedPrawn]

Hope that means you are subscribed now then.

[@echohotelsix]

Yep. Instant subscribe

[@TheProvokedPrawn]

@@echohotelsix hero

[@s2jzx]

No offense ; everyone after relaxing Either me 😂❤️ Wanna know something about that casing, my ques. is did it comes with fan controller(that 6fans controllerbox) ?

[@novalis791]

Thanks for showing the AIO cooler issue with top vs bottom spacing

[@Retro_Airsofter]

Amazing quality overview on the case! Got me prepared for also getting the h150i elite. Just FYI I was able to stick a screwdriver through the holes/vents of the psu cabin to loosen/tighten the hdd tray

[@TheProvokedPrawn]

Huh. You were? I contemplated that but didn't think it would work.

[@fififiz]

Such a great comprehensive review! I also really enjoyed your calming voice and the editing. Keep it up! :D

[@TheProvokedPrawn]

Thanks for watching. Hope you enjoyed enough to subscribe! :)

[@1Cloud1ful]

SO WELL DONE! Doing something pretty similar so this was really helpful! Thank you so much :D

[@TheProvokedPrawn]

I aim to please. Hope you enjoyed enough to subscribe 🦐

[@soapa4279]

Not gonna lie, I keep hearing the voice of that giant crab from Moana. (Edit: I should probably clarify it's Jemaine Clement lol)

[@TheProvokedPrawn]

That's a new one.

[@moment3380]

Lol

[@jago1329]

LMAOOO I HAVE NEVER LUAGHED SO HARD IN MY LIFE

[@onyzil605]

Deciding between this to match the rest of my corsair products or the phanteks p500a

[@camden2051]

definitely getting this case in white it looks so good

[@TheProvokedPrawn]

It does!

[@The0Flaming0One]

Really great video my man!

[@TheProvokedPrawn]

Appreciate it! Hope you enjoyed enough to sub.

[@daisyduck8593]

Looks very nice, the only problem for me is that I want to use 4x 3,5" HDDs for Raid 10. So maybe I have to wait for the Corsair 5000d Airflow

[@Robert.a._]

Spoiler alert: still only 2 HDD bays on the 5000D Airflow

[@morgan3625]

Thanks for the review

[@TheProvokedPrawn]

You're welcome.

[@sad8ify]

Good to know that the 8 LED ML fans on the AIO play nicely together with the 4 LED ML fans that you can buy separately while using commander core only.

[@harpoon_bakery162]

Well, the recommended replacements for the stock AIO evga 360mm is the Arctic 120 ARGB fans. but you can't get those to be recognized in iCue (naturally), so you have to control the RAD fans with motherboard software (MSI in my instance) so I end up having to use Corsair iCue for the top two exhaust fans and rear exhaust fan, then i control the front RAD argb fans with what i hope will be MSI's motherboard fan controls software (any idea what it's called so I can download it? i can't find it anywhere on their website). UGH, help!!!???

[@SerialSlooth851]

I wish the 4000X variant had a airflow panel included or as an option at least

[@Oliverm0001]

luckily since they have the same footprint, you can swap the front panels which they sell on their website

[@1sonyzz]

Nope - corsair obsidian 750d airflow edition is still a win for me after 7 years in new 'airflow' - joke case there is no bigger fabric mesh dust filter behind metal grill, and standart dust filter just chokes airflow

[@jesusiskingofkings3960]

You can buy the metal airflow panel off corsair website for like $4.

[@MauroCortese]

@@jesusiskingofkings3960 can't find the airflow panel on their website

[@thektmwanderer3274]

@@MauroCortese it is available in the site but out.of stock

[@lukaszbrzozowski9486]

Your voice is very calming for this type of video Edit: you deserved the sub

[@TheProvokedPrawn]

Thanks Lukasz. Hope you enjoyed enough to subscribe for more of it.

[@kingbrettman5696]

It’s a great looking case I just wish it came with fans that’s why I kinda wanna get the 220t instead.

[@GreenMachineXXII]

Case is so good 🔥👍👌✌️

[@45eno]

Just ordered this case while it was $80 on Amazon. Wanted smaller sized case that would still fit ATX board & PS. Also needed to support a tall CPU cooler as I have the Black Noctua D15 with white covers. Would have been nice it they included 3 fans so at least the front matches. I have 2x 140mm Grey noctua fans I plan to use in as the intakes. I am thinking I might just run the single 120mm exhaust. I might replace it with a matching gray Noctua 120mm. The calm manor of this review was pretty slick which was good for a like but that prawn outfit at the end had me reaching for the subscribe. Ha!

[@TheProvokedPrawn]

Thanks for watching 🦐

[@doisan8218]

I can listen to this and fall asleep. Voice too relaxing with that jazz music at the background.

[@TheProvokedPrawn]

sorry?

[@Broba_Fett]

I’m debating on whether to have a radiator as an exhaust or intake with this case. I guess it depends on the CPU?

[@Po7ent]

Corsair said using the radiator as an intake is best

[@devinstepp7674]

Very good video but man I really wish people would show the tinted glass on for the black version of this case. I know you want to show off the inside but I want to know what it would look like sitting on my desk. Very good video none the less.

[@aero9412]

What's the clearance like from the front panel to the fans? I'm personally looking at the normal 4000D so it's a needed detail

[@obenzie]

Could you possibly tell or show how 2 140mm fans would look at the front? Really loving the case, but the cutout for the 120mm fans at the front really piss me off, because I am not a fan of 3 small fans :D.

[@t.n.9508]

Wow yur videos have excellent quality, im surprised u only have 16k subs. Keep up the great work bro. Btw, I heard there's a psu cover for that gap (by the bottom fan), does it come included??

[@TheProvokedPrawn]

Thanks. Hopefully you've subbed! I'm not sure what you're referring to though, I covered everything included in the unboxing, I'm not aware of any other cover.

[@t.n.9508]

@@TheProvokedPrawn Let's say if u dont install the bottom front fan, u are left with an ugly gap by the hdd cage. Some companies like fractal has wats called a psu cover to put on there to cover up that gap (for ppl using 240/280 front aio). That's wat i meant, but nvm i did some research and u have to buy it separately.

[@TheProvokedPrawn]

@@t.n.9508 oh I see. :(

[@lozatron1991]

@the provoked pawn, hypothetically if you had modded the case to allow the tubes to be at the bottom of the rad would the tubes have been long enough to reach the CPU around the graohics card? Thanks and great vid

[@harpoon_bakery162]

no

[@DrBreezeAir]

I have a set of Noctua fans from my current case, so this is perfect for me. But the metal is unacceptably thin. I guess I'll buy another Fractal.

[@user-oo2zo5pi2z]

is there enough room for a push pull set up on a 240 front mounted rad?

[@blofy9571]

What case accessories does it come with?

[@doublea9701]

nice video doode

[@TheProvokedPrawn]

Thanks DoubleA. I've got more content on this case if you're interested kzbin.info/www/bejne/b3KoqJd5jKuKhbc

[@Vxid4535]

I just built my first pc in this case, I love the aesthetics of it and the fact it has amazing air flow, I have 6 rgb fans installed and my r5 3600 never goes above 55C while gaming (I have the vetroo v5 cooler) and the gpu (Which is a single fan 1650 super) also never goes above 55C, great case imo.

[@purple_haze8160]

Which fans did you use?

[@Vxid4535]

@@purple_haze8160 If you want to see what they look like in a build look at my video on my pc

[@TheLavac]

i'm running mastercase H500P. Considering to switch to 4000x RGB version, will it be an upgrade or downgrade in term of airflow and everything else?

[@Hermenaus]

8:30 - Would you think installing a 240/280 rad in the front + adding a standalone fan in the bottom slot would fit? (to preserve the tri-fan look)

[@TheProvokedPrawn]

I don't see why not. But it would be better to install the rad top mounted probably.

[@ax__digital9898]

Great vids. Do you know if it’s possible to fit an arctic liquid freezer ii 360 at the front ? I’ve ordered this case from watching your videos 👌

[@TheProvokedPrawn]

It will fit a 360, so I don't see why not.

[@Xettabytes]

OMG, you showed exactly what I been looking for all day. I plan to get the 4000D Airflow and the i150, and wanted to mount the 360 with pipes down like Gamer Nexus recommended. How close was it? Like can I cut the shroud a tiny bit? In your video it looked like it almost made it?

[@TheProvokedPrawn]

I don't think it's possible. If you're manly enough to cut the case then sure, maybe. But it certainly wouldn't be forced in there.

[@Xettabytes]

@@TheProvokedPrawn thank you for the reply. Do you think a 280 rad with 120mm fans would fit and give any benefit over a straight 240 rad? I am thinking the iCUE H115i ELITE with QL 120MM fans. Either that or I just install the 360 pipes up..

[@InternationalNathan]

Great video, will be doing a case swap for one of these later this week. You kind of mangled the fins on your rad trying to prove your point about how the pipes wouldn't go in tubes down didn't you?

[@TheProvokedPrawn]

No, they were like that out of the box weirdly. (Check the AIO video and you'll see it.)

[@zjzak6281]

bro i was scared of getting this case because my turn on button is on the bottom and this is on the top but i reelized that it super easy just to move it right there

[@alexdavies7112]

Are you using the two 140 mm fans at the top as intakes out outflow?

[@RuneBottle]

I just removed my HDD bay. I have a 500gb M.2 on the MOBO and then a pair of matching 2 TB 2.5 SSD’s mounted on the PSU shroud.

[@TheProvokedPrawn]

Super

[@hevz6339]

Will it be exactly the same if I buy the non airflow version and just switch out the front panel by buying it later on, it would be the cheaper option were I live and from what I have heard it would be the exact same. Ps. Your voice mate😍

[@PK-gf8hh]

is this a good case for front mounting arctic liquid freeze ii? would have to set it up similar to how you mounted your 360 aio?

[@Phoenix11720]

I made same mistake with having my front bottom fan too low at first

[@alanpilkington149]

This could just be me not knowing how to do it properly but I tried putting my SSDs in those cages on the back but there was no room to plug in the power and data cable.

[@TheSaas1980]

Odd complaint about the number of fans. For £75+ I wasn't expecting a full set of fans to accommodate the mounts. For most, 1x1 airflow gets the job done. For the more performance enthusiast, adding additional fans is optional and most are more likely to pick up aftermarket solutions per preference - which is the general idea here. Also the bottom front fan blowing towards the PSU isn't pointless. The PSU shroud vents actually work and air is pushed through to help GPU thermals (a little anyway). Also it's far more simpler to slot the PSU in with the cables attached. Good review though

[@kalakeitt0]

perfect case for noctua redux fans :)

[@andrewheuvelmans]

with your voice im just waiting for you to say: mr potter xD but good video on the case!!

[@TheSaas1980]

Thank you for an easy to follow review. You mentioned the 'icue command core' controller but I can't find it anywhere. I didn't know this controller was available for rgb + fan power ports. Can you kindly share a link?

[@TheProvokedPrawn]

It's included with the new AIO. Check the description for the link to that. It's not sold separately currently.

[@TheSjuris]

@@TheProvokedPrawn the same with the fans that are included with that.

[@averytucker790]

Jesus christ you need more subscribers. Your videoes are just flat out quality.

[@TheProvokedPrawn]

Thank you sir. Hope that means you are one of them.

[@pchelpforpeople598]

bring screws for when the graph is placed vertically

[@SwayyRL]

you probably could put the pump pipes at the bottom if you put them in first :/ put those through the hole then slide in the radiator

[@jimb8738]

But then how are you supposed to connect to the cpu with the hoses dangling in the bottom under a metal plate?

[@Itscjoy]

gonna go a similar route to this for my first build! macbook pro is shittin on me and don't want to pay those apple prices for mediocre power

[@danielvail5196]

Would this case fit a x299 eatx motherboard?

[@im_alibong7477]

Hmm... i have a 160mm psu, but i want to use a 3.5 inch hdd so will i have enough room for cables? It is fully modular or whatever its called when you choose which cables you want so i think ill be fine but can someone confirm?

[@scmotastic6462]

I can say that I loved the video, but I do have a question. I got Corsiar Vengeance RBG Pro ram, and I was wondering if it'd have the clearance to mount a 280mm rad?

[@TheProvokedPrawn]

The answer is on the description

[@scmotastic6462]

@@TheProvokedPrawn Didn't see that. Thank you!

[@labradoodle6761]

good review , was thinking about buying this case , but the HDD cage position is a deal breaker for me

[@TheProvokedPrawn]

yeah, it's a shame. You can move it a bit further forward, but it is a bit odd.

[@labradoodle6761]

@@TheProvokedPrawn Yes , I know but it's still very tight especially if you use stock cables and a 190mm PSU , and I need a HDD cage :/

[@TheProvokedPrawn]

yarp :(

[@pccoldwar9160]

here my tips work great 90% short airflow case where space counted simply remove cage use double sided tape to stick the plastic mounting drive also act as absortion devise if you get those whit some short of spongematerial that eliminate most vibration noise possible coming from them too.

[@avdimetalia3158]

Can you mount 140mm fans?

[@joshuabell7362]

I was considering this, but if the radiator can't be oriented with the hoses down it's a nonstarter for me. I suspected this would be the case from pics, but you're the first review/resource that noted that. Thanks for the video.

[@TheProvokedPrawn]

Glad to be helpful. Hope you enjoyed enough to subscribe 😁

[@kyhlekable8088]

Mount it on top? Unless u have a 360

[@joshuabell7362]

@@kyhlekable8088 it is a 360 unfortunately. The only 280 I'm considering atm is a thicc boi and might conflict with my ram

[@adeptum9590]

Will the radiator have clearance for top mount with Trident Z rgb ram and a Fractal Design S24 Blackout Addition 240mm?

[@TheProvokedPrawn]

The specs say you can fit a 240 up there. As for specific models I can't say

[@user-gz8jw1vt2f]

Can I still mount a 360mm aio with the tubes down if i sqeeze it together with the radiator?

[@TheProvokedPrawn]

I couldn't.

[@valhallaoutcast]

is that a new revision to the commander pro? mine only controlls the fans my RGB still goes though the RGB hub thing and then the RGB hub goes in the the channel 1 or 2 on the commander pro

[@TheProvokedPrawn]

Yup

[@Nucieftw]

Do you think that there is enough room for a top mounted rad like a 240mil along with the fans on it? or its the space very limited with the motherboard and the ram?

[@TheProvokedPrawn]

240 can be top mounted yes. It says as much in the specs, not that I've tried it.

[@tailwhipolaf]

Great review, but you never mentioned anything with the usb inputs, One looks usb 3.0, is the other usb 3.0 gen2 10gbps for type c connection?

[@TheProvokedPrawn]

Yes

[@tailwhipolaf]

@@TheProvokedPrawn How do you know this, does the connection look different from a usb 3.0 connection to the motherboard? I ask because its very hard to find cases with the new usb 3.0 gen 2 connections from cases to motherboard. Are they both gen 2 type A and C connects?

[@YourboiKyle4]

Can someone explain how to SSD tray works? I am confused about how you're supposed to run power and a SATA cable to it because it appears like there is zero room for either. Maybe the camera angle wasn't right to see the spot where it would connect.

[@jopapa1122]

I’m having trouble with this too

[@edoardodicesare2373]

what's the name of the model of fans included? I don't like rgb much so I want to get an extra 2 of the included fans to put in the front

[@TheProvokedPrawn]

Corsair AirGuide. But I don't think you can purchase them currently.

[@nikolasmeklis9832]

Does a push pull top radiator fit does it have enough room between an atx mobo? And can i push pull at the front?

[@TheProvokedPrawn]

Doubtful and no

[@SerbianBeastz]

will a top mounted 280mm radiator clear the ram? I have corsair vengeance rgb ram and a kraken x63 and im worried it wont have enough clearance

[@TheProvokedPrawn]

See the description/specs. I believe the answer is no

[@Anton-ng5oz]

Do you think two fans are not enough? I think with all the airflow/mesh, two fans are plenty if you dont hardcore OC ^^ Or do you think different?

[@TheProvokedPrawn]

It really depends. I tested this on the 5000D kzbin.info/www/bejne/qGayimyiob2FrdE

[@RichardKhawaja]

The fans that come with the case are PWM or DC?

[@diegomelendez448]

Can you try whit a cooler 240mm or 280mm on the top? I need to see if the cooler and the fans don't touch the ram memories, thx.

[@TheProvokedPrawn]

See the description. A 280 will only fit with certain ram types.

[@1king1god]

Can you push pull the top of the rad since you can’t fit a bottom fan in

[@TheProvokedPrawn]

Yes. Two fans can fit on the top.

[@gmdlunar3461]

On the 4000x rgb is the front panel still like the one on the 4000d airflow?

[@KG_BM]

No its glass

[@suudama]

On the 4000d airflow I have, the bottom where the radiator goes it looks like it can be taken off but I don’t know how to do it and I want to use a 360mm radiator in my case while mounting it properly. Can anybody please help me out?

[@Shingula]

can't decide between this, the Bequiet 500DX and the Meshify C

[@winterspeck6433]

I am in the same Situation, but i think its going to be this one or the Be quite 500DX

[@TheGlobuleReturns]

Get the Lancool 2 mesh

[@winterspeck6433]

@@TheGlobuleReturns ive seen alot of positive reviews about the Lancool 2 Mesh, but i just dont love the Design of it..

[@true3211]

well the design is better than the 500dx in my opinion

[@thebulletkin8393]

Trying to figure out the fan arrangement for this case, do you think having 3x120mm ones on the front and 2x120 on the back and top be enough?

[@TheProvokedPrawn]

yep

[@thebulletkin8393]

@@TheProvokedPrawn brilliant, I’ll see if I can get those ordered. One more thing, do you use the included fans with this case or just Chuck ‘em out / keep them?

[@iamlordjzs8264]

Is there enough room for airflow to vertical mount an rtx 2080ti asus strix card? Cause it’s a thicc boi. Need a case with better airflow over my NZXT H500 cause my GPU was hitting 82-84 C when gaming.

[@vladanpantic7342]

Get phanteks 500a

[@SquidNgzz]

Can a 240mm, 57.2mm thick aio fit on top

[@AverageCitizen333]

Best "how to sleep" video I've seen yet. 10/10 mono-tone voicing.

[@TheProvokedPrawn]

Not sure if this is a compliment or not.

[@itayr4827]

@@TheProvokedPrawn you should try to be more exciting, talk a bit faster. Also change the background music to something a bit more upbeat.

[@TheProvokedPrawn]

Thanks for the pro tips

[@itayr4827]

@@TheProvokedPrawn haha not a pro at all. Hopefully you weren't offended. I enjoyed the video regardless.

[@TheProvokedPrawn]

@@itayr4827 I've had worse comments.

[@richardparker8211]

Any issues with the AIO after having to mount it that way around?

[@TheProvokedPrawn]

No

[@captainxian]

what is that thing where the rgb cables are connected? it doesnt look like a commander pro.

[@TheProvokedPrawn]

Commander Core. it comes with this kzbin.info/www/bejne/pZCpkp15o9WBbLM

[@eduardopanduro5520]

Hi. What fans should I buy to complete the set? or Should I replace them all for another ones? in that case what would you recommend?

[@TheProvokedPrawn]

I don't think you can buy the fans separately sadly. I suppose it depends on your budget. Corsair's LL120s would look nice.

[@eduardopanduro5520]

​@@TheProvokedPrawn I've been looking through your recommendation and I noticed they have different specifications between colors. Do the white fans are better than black ones?

[@TheProvokedPrawn]

@@eduardopanduro5520 they do?

[@wtfarethesehandles]

can it fit a m atx?

[@steadypuppy1615]

can a rtx 4090 fit in that case?

[@MHollywood5]

Enough room on top for a push pull radiator?

[@TheProvokedPrawn]

I don't believe so

[@nikolasmeklis9832]

Hi i wanted to ask in the description where for the top radiator what do you mean by corsair vengeance lpx only and corsair dram only?

[@TheProvokedPrawn]

it means the non-RGB ram, as it's thinner/shorter and will fit. That's taken from the official documentation by the way.

[@nikolasmeklis9832]

@@TheProvokedPrawn oh i got worried thanks

[@chris.dillon]

Googly eyes on James Bond. Good. Good.

[@TheProvokedPrawn]

It had to be done.

[@demitrace4682]

Can you install a 240m radiator at the front?

[@matay1045]

Sure when a 360 fits the 240 will fit too

[@okayyeahhhh2339]

Which one would you recommend Corsair 4000D or Lian Li 2 Mesh?

[@TheProvokedPrawn]

Not tried the Lian Li 2 Mesh sadly. Have you seen the 5000D?

[@agrisimfarming]

I like your voice, very relaxing, reminds me of chyrosran22

[@TheProvokedPrawn]

Thanks? Hope you enjoy it enough to sub!

[@legollas5791]

Любой длинной отверткой, сверху можно добраться до винтов для снятия корзины жёстких дисков. Проблем не возникало, не зря сверху сделали сетку.

[@benover17]

Is the gpu max length with no fans and radiator in the front? I really need an answer thanks It looks good but I wanna put a strix 3080 with a 360 rad in there

[@stevinnissan8355]

I bought the 4000x rgb and couldn't fit my 140mm rat on top with corsair rams so had to move it to the front

[@benover17]

Got an update for yall spoke with corsair support clearance is measured with fans installed so total is 385 mm

[@victorchiew7552]

Does the case come with anything else like the tray and screws, or is it just the case itself

[@TheProvokedPrawn]

It has screws yes. Check the full unboxing and you'll see what's what.

[@victorchiew7552]

@@TheProvokedPrawn tysm

[@edoga8895]

What is the size for the case fans ?

[@TheProvokedPrawn]

Check the description for details on what size fans can fit.

[@tlgd5094]

Ses ou qu'on branche la tour du pc à l'écran svp

[@Po7ent]

So the radiator is fine with the hoses like that?

[@TheProvokedPrawn]

Yes

[@dezzin]

Hello! Quick question... I am building a PC o. The 4000 case and I am going to install the h100i on the top... Am I going to have a problem with the Ram height blocking the fans?

[@TheProvokedPrawn]

240mm rads will fit fine according to the specs.

[@dezzin]

The Provoked Prawn Thank you!

[@dezzin]

The Provoked Prawn will it fit a 3080 or a 3070 with the h100i on top or it will be a tight fitting?

[@petroly]

So using corsair vengeance rgb pro memory with a h115i 280mm on top will it fit???

[@TheProvokedPrawn]

"280mm w/ CORSAIR VENGEANCE LPX only"

[@viper165]

So if I have Vengeance rgb pro and wanted to top mount my cooler could I fit the h100i?

[@m1kefnbr409]

How do you installed the Commander pro so it fits so good and stable

[@TheProvokedPrawn]

The stickers

[@m1kefnbr409]

@@TheProvokedPrawn are the stickers included???

[@TheProvokedPrawn]

Yeah

[@curebunni5984]

How do you even plug in the fans it comes with??? There's no fan hub

[@TheProvokedPrawn]

plug them into system fan headers on your motherboard.

[@curebunni5984]

@@TheProvokedPrawn cant?? The fans are three pronged, nothing on my mother board is less than 4

[@Dingusdoofus]

Is this better or worse than the 275R AF?

[@TheProvokedPrawn]

🤷‍♂️

[@paulobyrne8584]

Always better to have radiator pipes at top just in case of any air pockets they will rise to highest point

[@harpoon_bakery162]

you mean radiator tubes? what pipes are you talking about? Didn't steve at gamer's nexus say having tubes up is bad?