The Definitive drift proof Hall-Effect sticks for the dualsense and xbox series controller!

Jun Module ( With Calibration Board )
www.aliexpress...
Orange Module ( With Calibration Holes )
the price is for 1 unit, so you must buy 2 to change both sticks
s.click.aliexp...
Jun Zeng Calibration Video
• How to calibrate Hall ...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
K-Silver Hall Effect Sticks for the Steam Deck
s.click.aliexp...
Hall effect Sticks for Joycons (Guli-Kit)
Amazon US: amzn.to/3ZAh42J
Amazon DE: www.amazon.de/-/en/GULIKit-Joystick-Replacement-Controller-Analogue/dp/B0BPSMXHDQ/
Aliexpress: s.click.aliexp...
Direct Link From Gulikit (if the first one is sold out)
amzn.to/3HtPJYJ
Guli Kit Hall Effect Controller
Black: amzn.to/3G2Ywkn
White: amzn.to/3A2tRj5
AliExpress: bit.ly/3rNERNl
✨Support me on Patreon: / victorstk
✨Join the Discord Server: / discord

[@kamm3021]

Hell yeah, a life without drifting across all platforms is now possible 😌

[@nexusprime2487]

Now if only Sony, Microsoft, and Nintendo actually uses hall effect sticks instead.

[@pawel8567]

Hall yeah 😂

[@Lewis99]

​@@nexusprime2487Probably means people buying less controllers, don't think we'll see that happen

[@nexusprime2487]

@@Lewis99 Of course aside from the consoles, the real money saving graces for them is the controllers.

[@corporatetool2563]

1st party Dreamcast controllers were Hall. Early PS3 controllers were too, before Sony got smart.

[@ljcool17]

Thanks for the video! Been seeing those Hall effect sticks for a while and have been apprehensive of them

[@nikkopt]

It looks like the way calibration works is that the piece of metal you insert in the hole will slightly move te piece of plastic that holds the magnet to one side or another. If it can easily be moved like that, i bet it will move with time and friction against the cage and you'll have to keep recalibrating.

[@Vianilix]

You can calibrate it online

[@nikkopt]

@@Vianilix 7 months ago you couldn't .

[@Vianilix]

@@nikkopt Yea you were still wrong with your bet

[@nikkopt]

@@Vianilix that's good, I'm glad I was wrong then

[@Vianilix]

@@nikkopt yea me too

[@pawes7418]

Have them , modded with replacing hall effect sensors with potentiometers for my flydigi apex 2 and works really well. Build quality of the module base is FAR BETTER than alps.

[@_Cntdr]

link for Hall Apex 2 please.

[@tatianamellstrom7806]

no stick drift i assume?

[@pawes7418]

@@tatianamellstrom7806 yes

[@misuki6579]

i'd assume the stick is compatible accross multiple console ?

[@Keiuran]

Marius Heier's design I think will be the actual definitive hall effect joysticks once he's finally completed his design. They'll probably be more expensive but likely won't require extra PCBs to make them work.

[@tekgeekster]

Kinda. The pcb will come attached to the potentiometer instead of having to order one separately.

[@konishiwoi]

@@tekgeekster which still means only one part to install

[@High.on.Life_DnB]

​@@tekgeekster The point of the video is to replace the potentiometer stick with hall effect sensor stick 😉 no hard feelings 👍

[@samxl001bd]

Did he say when he will release the joysticks?

[@flametai1]

Just here to second what Sam asked

[@isthisforme8127]

And I just bought a new Stellar Shift controller... This is seriously great to see though! Super excited to get these type sensors developed and finally out to gamers

[@originsmaster8140]

Bro they’ve been out for decades. And they’re only a few cents more to make. The problem is they save the consumer too much money because the people are buying a new controller every 6-8 months. If they developed high quality first party controllers that used Hall effect Joysticks, they would lose out on MILLIONS in sales.

[@Spazza42]

Yeah these are nothing new, the Dreamcast controller was a Hall effect stick, as was the PS3 - yeah, Sony used to use these

[@originsmaster8140]

@@Spazza42 yep. Only a year after the release of the ps3 they switched to potentiometers. So you’ll have some people that will remember stick drift and some that won’t because they were using different controllers.

[@8B1tbreaks]

The RC community has also been using Hall effect gimbals for even longer, actually, these days they’re almost standard in all transmitters.

[@Extasei]

Sadly Microsoft and Sony are never going to use these joysticks, they make waaaayyy too much money out of selling their cheap controllers. I'm getting a new one every 8 months - 1 year. And I know a lots are just like me, this is tons of money for them. :(

[@morrisdennison8039]

Theys why you need to learn to repair your stuff yourself. I know it’s doubting but once you get the hang of it. It get easier and easier

[@italianbasegard]

@@morrisdennison8039I’ve repaired my controllers with replacement sticks but part after part are continuing to go out on the board. Finally, the A button on the front is giving out on my oldest Series 2 (oldest out of four). I’ve had to desolder-resolder new sticks onto the oldest 2, and had to resolder bumpers on either 2 or 3 of them (each time replacing both bumpers when I’m in there). I’m not sure what to do about the A button going out, though, and that pains me. Some people literally suggest writing over the contacts with a pencil, but I’m looking for a solution not a workaround, and it seems like not many (if any) exist. Long story short, It’s just one thing after another going wrong with them in time… to the point it’s almost better to just start over with a new controller. I as well am unwilling to accept it, and I’m still fighting the good fight of repairs instead of just buying another controller, but man do they make it difficult. If only it wasn’t such a damn good feeling controller in the hands.

[@carpediem7654]

Bro i have 3 Xbox controllers with bad sticks. I decided to stop buying them and I ordered 6 of these hall effect sticks from ali express. I installed them and my controllers are practically brand new again. It's totally worth it.

[@Silverfox607]

@@carpediem7654 I'm in the same boat. My controllers die from either stick drift, or my cats knock my controller on the floor and it damages the USB port on them. These don't seem super complicated to attach, I just have to learn how to solder and I can stop buying new controllers again. Id much rather buy a 25 dollar pack of replacement sticks and a 10 dollar bag of USB-C ports than a 60-70 dollar new controller every year.

[@Eac18]

Buy the pro controller. Analog stick replacement is only 20 dollars and you don't have to take apart the controller to replace them

[@raguel259]

I've repaired a couple of controllers from various consoles and if I remember correctly the joysticks on the PS4 and PS5 controllers are pretty much the same.

[@artemisDev]

At last! all hail the people who made those I might get myself a dual sense finally

[@Josh_Spectre]

Hello, nice work! Amazing to see that more manufactures are selling this type of joystick, Can you test how they work on Xbox series Controllers ?

[@OmniTechGu]

They don't... I've tested them on 3 generations of Xbox One controllers to no avail. I came here to see if there was a way to make them work... But if there is, I haven't found it yet.

[@Josh_Spectre]

@@OmniTechGu Thanks, good to know, we need to wait till they release a working version.

[@karelissomoved1505]

finally I can buy anything without a worry

[@ben-tol]

i using this hall effect analog on my latest ds3,it works flawlessly,yeah I've been test on stick tester and it has jitter on it just like this person said,but wont effect on the gameplay at all,sony should do this to all his controller 😌

[@MrLegendL2118]

Now someone just needs to buy a ps5 controller & install these along with extreme rate back buttons and sell them!

[@lmAIone]

Finally, now we just have to wait for this to become mainstream. Im excited.

[@pootnannies]

unfortunately Jun's calibration add-on isn't cheap. i'd love to add it to my modded controllers but i think i'll wait until the price comes down or an alternative comes around.

[@SevenDeMagnus]

Cool, the calibration is a pain but I'm glad it exists now, thank you Gulilit. Is there a difference between the blue and mango orange one or they're just colors, any PS5 revision is compatible with any color? God bless Gulikit. Are they better brands though in 2024?

[@deathtoraiden2080]

There's several reviews saying the sticks only hold up for a couple of minutes before the calibration gets out of whack again.

[@zazakage62]

Sick edit bro 2:51

[@giacomodagostino6554]

it works on xbox I had taken the model for ps4 (my mistake) but it is very difficult to adjust because there is no room for maneuver, so every time you have to disassemble, calibrate, and reassemble hoping that it works. and when you press the left trigger, the stick moves, because under the lt button there is 'a magnet

[@VKsChannel]

You have to buy the correct model

[@mikeeyram]

There is a script in python you can run and it will calibrate ps4/ps5 controllers. It's not perfect for hall effects but it makes installing them a lot easier.

[@sokoloft3]

this is a major pita on the xbox controllers. You need the daughter board connected to actually plug it in to test and zero out the deadzone. Also for whatever reason. I adjust the deadzone in one hole. Its moving. I move and let the stick snap back like you're doing. But its just back to what the deadzone was before. Doesn't change

[@Ebolachicken]

amazing ! love to see it get done on the xbox please

[@VKsChannel]

it is the same process but you have to buy a different module, just solder it in then calibrate and you're good to go!

[@Ebolachicken]

@@VKsChannel Thanks I just watch his video i was wonder if you need the part in the back on the elite controller.

[@HeatFlames24]

What module do you need for the Xbox controller. Do you have a link for it?

[@REJR90]

​@@VKsChannel so just install do the hole thing and it's ready?does it also have the jitter/circular issues amd what can be done on xbox

[@Voltech230V]

@@VKsChannel is the Xbox consoles do the same as PS5 - eliminate this shaking effect on center position? Did You tested it?

[@koruzhuv2.087]

So the ps5 version will work with Xbox one s controlle, and not the ps4 version? I found there is 2 model in market 10k and 2k2, I don't know the deference and which one compatible for xbox one s? Iam hella confuse here, hopefully you will answer. You got new sub

[@roncconi]

Does this PS5 joystick work with the Xbox Series S controller?

[@Zeptoid]

Does the circularity and jitter matter much? I just watched your video on installing Jun's board, but i dont have anything to solder with. Planning on just using these modules on their own

[@SzadoB]

It doesn't matter, circularity is a pointless test, and jitter is filtered by setting a dead zone

[@deathtoraiden2080]

@@SzadoB How about you don't open your mouth about things you have no knowledge of? Circularity affects precision in all games but how much it affects will vary from game to game. In the example provided in the video can tell you that the experience will vary from not noticing anything to literally being unable to run diagonally in MGS4 (if it were installed on the left stick). I can also tell you these are the exact same circularity issues (slightly less actually) that you would get from a replacement joystick bought straight from ALPS (via Mauser). CORRECTION: These have worse circularity issues than ALPS standard potentiometers. I get around 15% from those.

[@bloopersnoopyflople]

Hey I’m planning on soldering Hall effect sticks on my Xbox series x controller. I see comments saying the software to calibrate is expensive? this is the part I don’t understand. Will I have to use some special software to calibrate them? Thanks your video was super helpful to me

[@VKsChannel]

For these orange modules its phisical calibration and no the microsoft calibration software is not expensive

[@Ghost-ed3oi]

This stuff is going to make me buy a soldering iron and save money overtime

[@robertusdony6961]

btw i like tension xbox 360 controller, its more hard/strong than xbox One or xbox Series controller.. strong tension make stick quickly back to center after release it.. im also prefer rubber ABXY on xbox 360, the reason is same, more hard😂

[@fabiodragon13]

Did you test it in a game in which you can change the deadzone to see if the jitter makes a difference?

[@monstermufin]

if someone would be so goated as to make these for old consoles 🙏🏽

[@TravelingBob]

Sega Dreamcast had Hall Effect Sticks from the start. And for other Consoles I think you only have to search for and will find everything.

[@Severem]

So for quick review... is there a video on how to install the hall effect sticks for the PS5? The video for calibration does not include how to actually tear apart the controller and attach the sticks themselves. Also, with the corrective board would be nice too. I have waited way too long for Hall Effect to come to PS4/PS5 and Xbox. This should scare the crap out of Sony and Microsoft because having these installed on a controller would save $70-80 in the course of potentially years. Thank you again for this info. Hopefully a full tutorial on how to put them all together would be great.

[@VKsChannel]

The sticks with jun's extra board is on the way I'll make a new video when it arrives

[@Dzugashvili]

i mean, that's precisely why they don't switch to it themselves i would bet. gotta keep people buying products designed to fail

[@rwby1337]

already sorry for my bad england, but it possible to put hall-effect stick to xbox elite series 2 controller? because default sticks have much deadzone and little bit drift btw i know thumbsticks is different between elite and normal series x

[@hary2688]

They are on AliExpress

[@Ekouhz]

Did you find out about putting this on a ES2? My sticks are drifting sadly and I’d like to upgrade mine so I have the best controller possible

[@rwby1337]

​@@Ekouhz yes, i just putted hall effect analog from xbox series controller to my elite series 2 and lost useless thumbstick tension.

[@HamsterXFiles]

Still a lot work involved, don’t think I’m ready for this yet!

[@GOATGamerProSticks]

3:33 Large circularity. Ide bet i could shrink that to just over 100% with 3x3mm trim pots 😆...

[@TheControllerPlug]

please explain? 🤔😅

[@GOATGamerProSticks]

​@@TheControllerPlug I can do better than explain. I've got the videos 📽️🎬🎞️🎬 and resistance changes 📊 mapped out for calibration 🎚️🎛️🪛 📈📉 for circularity ⭕ & deadspot 🎯 sake size & positional adjustment to prove the trim pot method. An Xbox one pad 🎮🕹️🕹️🎯🎯🪛 playlist & a DS4 pad 🎮🕹️🕹️🎯🎯🪛 playlist with the bulk of my work in there where you 🫵🏼 & everybody else will understand everything I claim to know 😉😜👍🏼. Look 🥹 & yee will find 🤗 friend, the super simple method of manual resistance manipulation. It's not futile it's mine 😁 😂🤣.

[@GOATGamerProSticks]

​@@TheControllerPlug What pad 🎮 do you own to work on?

[@ch00se]

Horizon has a high deadzone setting which you can not change, you should have tested the stick on a game where you can change the deadzone settings.

[@aadam6089]

Some third party needs to make a dualsense edge hall effect module

[@carpediem7654]

What makes these so good?

[@Mickparrysstepdad]

The magnet doesn't touch the sensor, so it's can't wear out, unlike the Alps pots that all the manufacturers seem to use these days. The Alps pot have a metal 'wiper' that presses against a carbon track. Every time you move the joystick, the metal wiper is moving against this thin, carbon track and wearing it away.

[@carpediem7654]

​@@Mickparrysstepdad i ordered 6 and replaced them on 3 controllers. Brought my controllers back from the dead. Amazing. No need for anymore controllers.

[@dwhizk]

Hey man, do you think the Xbox One hall effect modules works for 3rd party? Like hyperkin or powera

[@sleepingmonster1632]

For those who are not techy person. Can you just buy a controller where this hall effect is installed already?

[@VKsChannel]

I only know the phantom hex, it is a modded controller that comes with these sticks installed Other than that you can also buy the controller and the modules and ask a game repair shop to install them for you

[@junecontreras6896]

Subscribing, I like your research 👍🏾 thank you

[@HarunTerzi911]

Can you make a video, implenting these sticks with Jun's module on an xbox series s/x controller?

[@OraOraOra]

Thank you so much, Sir! I want to mod my Controller. I just subbed. Will you update us on new Magnetic Sticks? I'm a bit worried becaue the Shaking. Also, I found a 400mAh Battery Kit on Amazon for the Dualsense, are you also into this kind of stuff?

[@VKsChannel]

Get jun's module It has the shaking fixed

[@Layhss]

shaking isn't seen below around 3 deadzone, which is really low and lower than the average 5 (in esports) you will be completely fine the jittering is in the center where even if you tapeed the stick it still wouldn't move, deadzone practically or does cancel it out

[@OraOraOra]

@@Layhss Thanks. How do you set the Deadzone on PS5? I will use my Controller on PC, there is DS4 Windows and Steam Input, right? And ofc in game settings

[@BenutzernameXY]

@@Layhssin apex you don’t play with deadzone

[@Layhss]

@@BenutzernameXY what do you mean you don't play with deadzone? people use dfferent settings

[@captainzuper2506]

oooohhh, I misunderstood the title. I thought "definitive drift proof" meant definitive proof that Hall-Effect sticks can drift, too, instead of drift-resistant xD

[@boefje1976]

yes,i am looking into this but the hall effect sensors seem out of stock on multiple ali vendors?? And the jun zeng's pcb boards+hall sensors are pretty expensive on aliexpress 30$ incl shipping?The hallsensor and pcm board as 1 set should be like 3$ or so as a fair price,.. (The hall sensors are like 40ct a piece and a pcm board like that should be like 1$ a piece max,so 3$ is already a 100% profit.) And to install you have to be a kindoff pro technician with soldering skills and professional gear,because many small mistakes can be made and it wont work.. Anyways thank you VK for this video,hopefully this is a solution for the billion dollar industry of stick drifting controllers,i bet sony and microsoft etc dont like these kind of engineers.Jun Zeng can be a hero for millions of gamers worldwide,if the setup works.It's just a matter of time more vendors will supply the sensors and pcm board for reasonable prices.I am gonna try it out anyway and buy it from Mr Zeng,i do award him for all the work and efford to design the driver pcb board.

[@dark-california]

Any updates, what's your experience ... ?

[@boefje1976]

Hey Dark,thanks for asking,unfortunately not yet,i do have all the parts from jun zeng now,the total cost came up to 64,25 euro for 2 pairs🤥,because sender forgot to put ioss number on the package,and double vat had to be paid...just finding the time to install,i will update when installed@@dark-california

[@seppeqespecho4260]

Hi there, I just installed Ginful Hall Effect Sticks to my Xbox Series X/S Controller. First everything worked out fine. But after updating the firmware and run the Xbox Accessories calibration after 1-2 minutes connected, the sticks are going crazy . When I unplug the controller and connect it again, everything is back to normal for 1-2 minutes. I already played some games for about 2hours before updating the firmware, so it must be an software issue. Another related problem is when I try to revert the firmware I recevice an error. so I stuck and the controller is useless in this state. Any advice?

[@tales.sampaio]

Does the magnetic field generated by controller vibration affects the sensors?

[@VKsChannel]

not really

[@henryb610]

Without adding a pcb, wich version is better for the ps5, the yellow or blue type hall analog?

[@weedless9531]

did u find out which are better blue or yellow ?

[@superstreetfighter14]

I prefer the potentiometers over the hall effects as it seems less complicated overall. Just need to replace the wipers (potentiometer) after being worn out. Hall effect calibration is complicated.

[@p4rsec]

in what way is it complicated? you calibrate them once and you never do it again.

[@superstreetfighter14]

@@p4rsec They (hall effects) are known to have circularity problems while calibration.

[@ethanjensen1445]

Where can I can I get replacement potentiometers?

[@superstreetfighter14]

@@ethanjensen1445 Any place where they repair controllers.

[@Empty12345]

You don't even have to calibrate if you buy a controlled with them already installed

[@gm-jura]

Você chegou a testar o sensor de movimento do controle? Acabei de instalar os analógicos laranjas magnéticos no meu controle e estão funcionando bem, mas percebi que o sensor de movimento do controle que eu uso para mover o cursor e digitar no teclado virtual do PS5 não está funcionando direito. Será que fiz algo errado durante a montagem?

[@VKsChannel]

No meu funciona tudo normal

[@VKsChannel]

Pode ser defeito do controle mesmo uma vez q o gyro n tem correlação nenhuma com os analógicos

[@gm-jura]

@@VKsChannelvou esperar o analogico do meu outro controle apresentar defeito e então fazer a troca também pra ter outro comparativo mas acredito que eu fiz algo errado durante a montagem do controle que afetou o giroscopio.

[@TS_Mind_Swept]

Hope these will be compatible with my PowerA Xbox style controller, would love to switch out the joysticks I currently have for them, one of which is completely busted..(I have 2 of the controllers)

[@faze_alex24_yt13]

Does it work with Xbox series x/s ?

[@ghostashghostash1518]

Hi just a question, must i get the circuit board together with the hall effect joysticks? Or can i just get the hall effect joystick and socket it into the ps5 circuit board itself? Appreciate the help :)

[@VKsChannel]

There are 2 different models If you buy the orange one you dont need the board But with Jun's module you'll need the board that comes with the kit

[@ghostashghostash1518]

@VKsChannel Alright thank you for the prompt response! Have a good one!

[@icanic]

But what about circuality test, it is really bad wih yellow one?@@VKsChannel

[@VKsChannel]

@@icanicI did the circularity test in the video, it's not reeaaly bad, I've seen worse but they're not good either, In the end it depends on the game you want to play

[@icanic]

​@@VKsChannel yes, I watched the whole video but I think 20% error is bad for aiming.

[@OrgathmTech]

would be nice for oculus / meta quest 2 (and maybe 3)? i`m using my 3rd pair of controllers because of that drift. hallsensors would be e great solution.

[@Dougie085]

Is it really worth doing the little PCB's for casual gaming? I'm not sure the circularity or jitter is really a problem for most things?

[@Graciashauf]

Why isn't there a company selling upgraded versions of xbox and ps5 controllers with hall effect fixed etc out of the box?

[@georgepierre3594]

There is. Check out Flydigi Vadar 3 and apex 4.

[@aditesto7918]

Wich version is the best ? White black or red ?

[@tanner3270]

hi vk its been 6 months since ur test video for the switch hall effect sticks, have u got the new 2nd batch sticks and will u make a new video for them and where do i buy the 2nd batch sticks from cos i dont want the 1st batch ones thx

[@VKsChannel]

Hi! Yes I did but I haven't been using them on my main joycons because they feel a bit more stiff than original analog sticks, so I put them in my secondary pair of joycons and haven't used them ever since I still use my paper fix and its working perfectly, had to replace the cardboard piece once and thats it

[@G59Loser]

Might do this for a drifting dual sense and use it on pc, worth it?

Muito bom o canto dos passarinhos.

[@YuyinGOMEZ-ib7vd]

Wow

[@zata3834]

Você chegou a fazer algum teste separado com esses analógicos laranjas no controle de ps4? Eu tava querendo substituir os meus com eles, mas ainda não tenho muita certeza

[@VKsChannel]

Funciona igual, tem videos no youtube mostrando eles ja

[@VKsChannel]

Mas tem q comprar a versao propria pra ps4

[@AJgamer17]

I calibrated mine totally online connected to a pc, less than 5% error. I also notice these come out of the box at FULL SQUARE rotation, not good.

[@High.on.Life_DnB]

Awesome video! If Sony won't do it, I might when my controller's stick drift starts to get out of hand (and yes it's worsening over time)

[@williamtael8379]

Uma observação: todos os controles com analógicos hall effect que já testei precisam ser circulados (girados com o dedo) pelo menos uma vez a cada vez que você liga o controle, pois caso contrário drift acontece.

[@VKsChannel]

sério? em todos os controles que testei nenhum teve que fazer isso não tem certeza que não é do jogo ou do pc q vc ta usando?

[@williamtael8379]

@@VKsChannel Pode ser os emuladores. Testa o Vader 3 Pro ou o KK2Pro no Yuzu, Cemu ou algum jogo de PC. Liga o controle, não mexe nos analógicos e durante o jogo empurra o analógico esquerdo para apenas um lado para mover o personagem. Se ele começar a andar sozinho vai comprovar o que eu disse. A mesma coisa acontece no analógico direito.

[@paulodossantos5380]

Ué. BR?

[@williamtael8379]

@@paulodossantos5380 Sim.

[@paulodossantos5380]

@@williamtael8379 boa. Assim fica mais fácil de pedir ajuda pra resolver problema dos meus controles de PS4.

[@MassimoFantinato]

I saw that there are two versions, one blue and this orange one you showed. Do you know if they are any different?

[@Lardzor]

Does the hall effect sensor joysticks have any effect on the controller's battery life?

[@sheboyganstaff5806]

wouldnt the left stick of the Xbox Controller be affected by the magnet on the left trigger?

[@CuriousTinkering]

The problem is not the part or the soldering but the calibration required after installation.

[@VKsChannel]

Its a bit finicky but not too hard

[@Layhss]

easy to do once you do it once, it can sometimes take a while, but I found a trick to it but it involves tinkering on both axis

[@danielc5647]

Nice product, wish it was cheaper

[@suberlex2468]

Need one for elite series 2 very badly

[@kliverjohn]

Hello... Can u do it in cod mw2 with maximum sensitivity r3 or aim. I want to see if it gonna have jitter filter or neutralize it by ps5. 🙏🙇‍♂️

[@VKsChannel]

Get jun zeng's module, it has no jitter and its overall much better, the links are in the description

[@Kenjaiz]

I replaced the switches to hall sensors and it worked beautifully for a while then I got the 2 orange blink error. I double checked the battery connector and it seemed okay. What could be the problem?

[@F3PIZZA]

Anything for the Nintendo Nunchuck?

[@चिरंजीवसिंह-ख5प]

What is difference in ps3, ps4, Xbox hall effect joystick module??

[@pertaz6640]

It is actually pretty sad that sonny and Microsoft doesn't give a shit about their customers in terms of controllers, but there are plenty of people that don't care

[@ibleminen]

Will they work with the dual sense edge? If so, I am pretty sure that the ps5 allows for calibration on those.

[@Darklord_tK]

This is completely unnecessary for daulsense edge since you can just buy new stick modules for it, however with the base daulsense the only option is to completely replace the controller, these halleffect sticks save you another $75 where the edge modules are only $20 and as long as you're not literally destroying your edge $20 every other year isn't bad, but I'm not going to spend $200 on a controller I'm only going to play games casually with

[@kleytman]

look like they come with drift preloaded

[@Strykerx31]

Me with A Duelsense Edge: Well crap.

[@VKsChannel]

well I GUESS that you might be able to open the analog stick module and replace the stick inside

[@SlampthChompth]

Do they feel any different?

[@Verdaderevelada34]

Is there dead zone or delay? on those hall effects stick

[@KyleNornIreland]

I want these in every Controller sadly Greed is the Reason we dont have them anymorr

[@OfficialMyMindset]

Do you have the video link to how to install the Jun one with the board? Curious to see how hard it is first before I buy

[@VKsChannel]

Jun will send me the modules soon, I haven't got them yet

[@dominickjuarez5461]

the replacement ones that I get of ebay always give me a square window after replacing, will these give a circular window ?

[@Mrchiefsaygg]

Are these compatible with Xbox series x? No need for the board? Just solder it? Please some1 answer

[@edmilsonjunior5091]

Sabe se lguma loja/oficina de console no BR já trabalha trocando esses sticks?

[@VKsChannel]

Acho mais facil vc comprar as pecas e levar em qq loja de reparo e pedir pra trocarem O procedimento de troca é igualzinho a um analogico original, vc só vai precisar calibrar depois

[@OB1-The-Only-1]

***Has anyone changed the internal spring to increase stick tension ??

[@TheNoNameOneManShow]

Do you buy the ps5 one for the series x or the Xbox one

[@joystickblaze]

What is the behavior of these joysticks gaming on Windows PC?

[@mrfawkes9110]

Do they sell these somewhere that will actually ship what I order? I closed my Ali account because they got fewer than 10% of my purchases to me and only a third of those actually work, that place is just a scam pit as far as I'm concerned.

[@Marcheziora]

Wouldn't the Magnetic Left Triggers on Xbox interfere with the Left Sticks because it's right under it?

[@VKsChannel]

Well from reports on the internet it doesn't affect it but I can't confirm it for sure

[@ryanjay13]

Did you try gaming on pc and if so how is the jitter?

[@aditesto7918]

I tried with the Red Version (red instead of black) you have to put the deadzone at 10 percent, then the jitter is no Problem, but they arent acurate, so i dont use them, changed them back to Normal potentiometers after testing them

[@exc076]

Aber beim Xbox controller stört der Lt Trigger durch seinen Magnet den Stick❗❗❗❗❗

[@DzaceQ]

Agree

[@exc076]

@@DzaceQ So you have to convert the triggers too, but you can't play racing games

[@BaamAlex]

Do i need now the hall effect sticks with the pcb or just the hall effect sticks without it? Any answer would be nice. Thx.

[@richh9570]

It depends on which model you choose. June's model comes with a kit which requires the pcb board. The other model doesn't need the extra PCB board.

[@jsp6867]

Are these compatible with the Elite Series 1?

[@samsonite187]

Any luck figuring this out?

[@SonicSlyMan]

Wonder why you just cant calibrate it on the ps5 its self switch lets you do it

[@fortypersec]

you should add to your testing methodology the range of each axis.

[@VKsChannel]

What tool is used to test this?

[@LEV1ATAN]

Can I use this with a PowerA controller? For the xbox

[@DalazG]

I'm confused. Do i need the circuit board also? Or buying the sticks is enough

[@VKsChannel]

If you buy the orange one just the sticks But if you buy jun zeng modules you need the boards too

[@DalazG]

@@VKsChannel appreciated! Do you have any installation video? I'm assuming you can't do this unless you have a soldering iron

[@sicklelkcis]

Will this work for a Scuf FPS controller? i've heard bad things about how long a scuf can go without drift and was wondering if a hall-effect is compatible?

[@LUCKIPUP]

it should they all use alps sticks, i would double check the pin count for the potentiometers

[@GamingAmbienceLive]

*WHERE IS THE UPGRADE FOR THE LOGITECH EXTREME 3D PRO*

[@oledevo]

I click on the seller's product page on ali for those boards and one of the three options is "joystick" and is one single joystick with a price over 9000? What's that about?

[@VKsChannel]

Probably selling in big quantities for resellers or game repair shops