The Definitive Guide To Assembling Your HCALORY Diesel Heater For Overlanding.

[@graemegilroy6481]

Tried for hours to prime the tool box version to no avail, then watched this video and it’s the only one that makes you realise it goes it itself after a minute or two so yeah thanks for that 👍

[@dougbas3980]

I will receive the brief case unit tomorrow. Glad to hear it is quieter. I hear the pump noise can keep you up at night. I intend to use it in class C and unheated garage when working there and maybe the SUV. Your video is excellent.

[@Mumfy64]

The case does help with the noise by also the setting is also a factor. The higher you set it the more often you’ll hear the fuel pump ticking.

[@Den-ml7zg]

Its way quieter than my two vevors. I have two running most cold nights and the Vevors pump drowns out the fcallory.

[@jamesshih6455]

Received my 98 today, thanks to your video I had it assembled in no time, truly appreciate your clear instructions and efforts!

[@Mumfy64]

Glad I could help

[@johnmurray2196]

Great presentation my friend very thorough and clear no crap music or anything to distract.Have made decision on buying the breifcase type after your help will sit outside my camper van and hot air duct will come in my porthole window at yhe back...one point on the muffler for the exhaust pipe...keep the pipe pointing slightly down with the dmall drainhole downwards for expelling water vapour from exhaust...otherwise perfect...God Bless from Bonny Scotland!

[@smogmaker5497]

Nice Job of showing us not only the good and the bad but also the OOPS.. I have been looking at getting one and after having watched other reviews yours has trumped them all and finalized my decision. I agree with you on the suitcase one... thanks for your time making this for all of us..

[@Mumfy64]

Thanks for watching. Glad it has helped your decision.

[@kdmx2]

Thanks for having this video. Just purchased the briefcase unit. Had it up and running in no time thanks to your video.

[@Mumfy64]

Glad it helped

[@JohnRohanShield]

THANK YOU for this. I bought the suitcase version and the manual had many pages of instructions about the control panel but ZERO instructions on how to assemble the thing. Very frustrating. Even the photo in the manual was a slightly different unit.

[@Mumfy64]

Glad I could help.

[@charlesbachand6884]

Wall mart has the Hcalory diesel heaters on sale today 3/10/23, for 89.99 for the black one and the white one, I bought both, the black one is nicely made I disassembled it and it has a heat-resistant outer shell made of durable plastic the aluminum was poured and was quality built, the inner burner tube was made of stainless steel very nice, lots of heat and runs nicely. the white one has an aluminum outer shell that is made perfectly the heater is 95% the same the only difference is the burner tube is steel not stainless and works the same with a lot of heat.

[@bearstrail7342]

Just bought mine from Walmart should be here on the 20th 🎉 saved a pretty penny vs ordering from Amazon thanks!

[@aliensexlovesoundsahhh176]

Where do these 3 washers and 5 self tapping screws go? I can not figure it out 🤔🤷🏽‍♂️😂

[@whodatcanuck3519]

I appreciate the walk through. Not to mention your taste in vehicles 😉 You just gained a new subscriber.

[@Mumfy64]

Hope it was helpful. Thanks for subscribing!!

[@benjimanlee]

Great video…..I’ve just got one of these and I’m not entirely sure I would want my exhaust to be coming out next to my air intake…..is it ok to that?

[@Mumfy64]

Which version are you referring to? On the Briefcase style the exhaust is on the same side that the hot air is pushed out of the unit. On the Tower unit, I can see the concern. The exhaust tube can be bent/moved to any position so that the fumes won't be next to the cold air intake.

[@ralphbutton8602]

Thanks much you gave me some great information and I made up my mind. I’m going the same way. Happy camping God bless.

[@Mumfy64]

Glad it was helpful!

[@lezlisage5730]

I get my heater Wednesday! Super excited. Your video was helpful because I’m a girl camper and new to diesel heaters. What is the max length you’d recommend the heat output hose? I have a roof top tent I will be feeding the heat into.

[@Mumfy64]

I suggest getting an 8’ - 10’ hose.

[@PainterD54]

If you run your exhaust hose as long as possible inside before it goes outside, you will capture more heat off the unit. Make sure the exhaust is always directed downhill so the condesation can drain our, or drill a small hole in the low spot.

[@solomonthe9076]

Thanks for the instructions. You are lots of help , it's working fine , on number 1 it's enough to heat my van. So really big thanks.

[@Mumfy64]

happy to help!!

[@Ross-re2up]

One big oops in their design is running the exhaust straight up. you will get an error as soon as moisture collects in that pipe. They are design to flow downhill and actually have a moisture outlet on the muffler....

[@Mumfy64]

I have looked into this as well and I think you can just put the muffler in the exhaust vent. Or you can bend the tube to face a downward angle when out at the camp.

[@willisbcteoh9840]

Helpful video 👍 my choice is the PC Type.

[@highplainsdrifters307]

How did you get the unit to run on the Jackery with only 10amps? I've been trying to get mine going and will not with the Ecoflow river 2 pro with 10amp port also.

[@vinboughton4751]

Briefcase for sure

[@JMWConceptsTheOfficial]

What are thoughts in this controller vs the more common ones without the knob?

[@norcoredneck]

Appreciate the video. What yellow fuel can is that you used to fill the heater.

[@MichaelGuzman247]

Thanks!

[@tripleminthehouse]

2 questions. Do you have a link to the knock-off yellow RotoPax? Second...do you think the heater hose is too close to the exhaust? I've ordered some wrap just in case. Great Vid...gave me the confidence to put mine together. Thx.

[@Mumfy64]

2 Answers: 1. Link to the knock-off rotopax; amzn.to/3lET2V1 2. No, the heater hose is not close enough to the exhaust hose to cause any issues. Glad to hear that the video helped.

[@dvldocflury]

Great video! Really helped me set mine up.

[@Mumfy64]

Glad it helped!

[@richardcruz6111]

Love the video, however I have a question about the power. You hooked it up to a jacket 300, how long will the power last before you need to recharge? I'm asking because I want to buy one to setup in a van? 2 things will happen, I'll either run out of fuel or run out of power thru out the night? Can you give me some insight on this? And also what power station can I go with to insure proper funtion.

[@Mumfy64]

If you are planning on a van build, I would look at doing more of an onboard setup. route the exhaust to the outside of the vehicle and setup an aux battery system. But if you plan on using a portable battery, look at the Jackery 1000. That should give you enough battery for a few days.

[@HoldYourSeahorses]

When using this on the exterior of the tent, how will you be able to use the thermostat if it is on the unit outside?

[@Mumfy64]

This unit has Bluetooth, so I can adjust from my phone.

[@GraemeGreenwood]

have you tried running the all in one while out in the snow? Any issues with waterproofing? Would be concerned the controller electrical connections would be at risk of water ingress.

[@davidcarrico3385]

Great video. Question on the black briefcase version, when attaching the exhaust pipe, it looks like you have the exterior pipe going ‘into’ the case pipe, and at the muffler side, it looks like you have the exterior pipe going over the muffler inlet. Is that accurate? And if so, how did you know that’s the way it should be done? I’m not the handiest of guys so the lack of instructions is throwing me off 🙂. Thx

[@Mumfy64]

The ends of the exhaust hose need to be bent a little in order to fit the case exhaust and the muffler. There isn't a specific end that goes in either.

[@dirtnsmores]

for the briefcase unit... did yours come with screws to mount the fuel tank? I have a lot of screws, but none seem to be the ones to mount the tank and I didn't see it in your video.

[@dirtnsmores]

nevermind i found it! now just trying to figure out the electrical adaptor i need to the jackery

[@Mumfy64]

@@dirtnsmores Glad you found the bolts you needed. I have added the 15a DC plug link I used to connect to the Jackery DC port in the description.

[@dirtnsmores]

ok i see the link! So the rings on the end of the heater cable will just slip into those plastic connectors from the plug you linked? @@Mumfy64

[@Mumfy64]

The ring will not connect to the end of the Spade connectors. To set it up the way I have it, you will need to cut the rings off and use a spade connection on both the DC plug and the power cable. These are the spade connections i use. amzn.to/3vLteeN

[@aaronmorrison9451]

what insulated pipe should be used to protect inside insulation/tongue and groove? thx

[@Mumfy64]

If you are asking about the tube that you run to your tent then you can order a 3” insulated dryer vent tube off amazon. 12-16’ should be good.

[@roddick1185]

I just get it and planning to put it on my refrigerator in the garage and make a hole in the wall 8"x8" filled with metal tin and the exhaust pipe go through it.Do you think that pipe and muffler can get rusty after a time.I am planning to keep that permanently.

[@camillaaasen7149]

Thank you for this video!! How does the bluetooth work if the car is in the garage? I want to be able to set the heater on from my house, when the car is in the garage. (from my window through a brick wall, maybe 20 meters)

[@armsfamilyfishing]

Do you use that same jackery for the suitcase heater while camping and if so, does it last at least all night? I have the same jackery and was wondering if I will need to upgrade. Thanks!

[@Mumfy64]

I do have the same one I did the test run on, but I also have a 1000w Jackery as well for heavy draw items. If you were to keep this on a low setting you should be able to keep the 300w with the unit. But to be safe I suggest a 500w.

[@josipalegac922]

Hello, we received it a few days ago. Our vision is to have heating in the car using it. Any advice on how to insert it through the window, using Plexiglas

[@oshalkovsky]

Прекрасный обзор. Я получил ответы на все вопросы. Большое спасибо!

[@MichaelGuzman247]

Great Video! QQ-Does it need a persistent dc connection to run?

[@Mumfy64]

The unit will need constant power to run.

[@royalwapiti]

Could you drill fuel hole in tank at the top and push tube onto the bolt (with hole in it) run tube to bottom.

[@Mumfy64]

With the parts that are provided, you cannot run the tube that way. You can look at getting a stainless fuel line kit and run it that way.

[@dab0yhdizzle]

Thanks for the video man im also getting same set witu jackery 300

[@dab0yhdizzle]

Does red one has Bluetooth too ?

[@Mumfy64]

both of these units have bluetooth.

[@JesseRizo]

Great video 🔥🔥🔥 this thing is cool

[@Mumfy64]

Thanks Jesse!!

[@Rob81818]

I purchased this a week ago. However I'm having trouble with leaking when I installed the nozzle into the tank. At first I thought it wasn't tight enough, but it still leaks very slowly after tightening where the line is wet with diesel. Does yours leak by any chance?

[@Mumfy64]

I am not having a leaking issue, but be sure to double check your O-rings to make sure they are set correctly.

[@DocWrangler]

great video, thanks for making it! (I'm running the vevor...does the job, but def kinda cheaply made!)

[@Mumfy64]

Vevor is a decent brand but I feel that they are about the same quality as they are all made in china. Best to hope for one that doesn’t have a defect.

[@tedsamuels3203]

I'm wondering 🤔 if I can run a 5 gal fuel tank setting it 2 ft away from heater and away from the exhaust , Would it work 🤔

[@Mumfy64]

With a little added setup you probably could. I'll be doing a rotopax solution this year to get more fuel capacity.

[@carllarson7099]

For either of these, does the diesel fuel in these plastic containers emit an odor - especially if they were being transported in a car that may get pretty warm during the daytime?

[@Mumfy64]

I haven’t noticed an odor coming from them. But I’ll be switching over to a diesel roto pax. Stay tuned for the setup.

[@adventuremikesgarage]

I can’t wait to see your diesel rotopax setup. I think I will be doing the same.

[@larrybuckner4827]

Hello what brand is the red diesel heater I would like to get that exact heater ...if you don't mind me asking

[@Mumfy64]

Both units are Hcalory. I have a link in the description for both.

[@MrTyroneweaver]

setting up you diesel out let line up off the bottom allows sentiment to be on the floor rather than being picked up.

[@travish2127]

Why do I have extra screws? The self tapping ones from inside the tank specifically

[@HoldYourSeahorses]

Are you able to run the hcalory from strartup on the dc output? from what I've researched it pulls around 13 amps at the beginning and the Jackery is rated at 10 amps.

[@Mumfy64]

Yes I been able to run it on the DC outlet from my Jackery 300 & 1000 from start up with no issues.

[@NazNazan-u9z]

Good job❤❤❤❤❤❤

[@Pete.Ty1]

👍👍👍.Thank you

[@Mumfy64]

Welcome 👍

[@207-outdoorsman7]

Put it inside ice shack vent exhaust out though floor?

[@THerd-um5tl]

Why would you route the exhaust so it sits next to the air intake? Looks like a great way to pull CO2 into your heated space to me.

[@Mumfy64]

You can angle the exhaust however you need on the tall unit. the briefcase style is fixed.

[@THerd-um5tl]

Of course it can be repositioned, but your "definitive guide" is showing AND guiding your viewers to position it near the air intake, which can result in C02 poisoning or death!@@Mumfy64

[@goraplx22]

can the muffler be mounted straight to the box?, shouldn't it be lower so that the excess of fumes can escape through this small hole in the muffler?

[@Mumfy64]

great question. I have seen the muffler mounted to the exhaust port before but i have not tried it yet.

[@fodera0915]

nice work!

[@Mumfy64]

Thanks

[@HM-vu9zw]

For those that camp at high altitudes this unit is not suitable for use above 6800 feet, something to keep in mind.

[@jazzsounds8159]

What type of connectors are you using for the dc to power station?

[@Mumfy64]

This is the dc plug I use. You may need to change the connection. amzn.to/46BfznH

[@InGratitudeIam]

What is the advantage of running the exhaust next to (and near) the air intake?

[@initrox1255]

Because with it set up that way, after about 8 minutes, you won't have to worry about being cold anymore 🤣

[@hellobrae3144]

Do you ba e the link for all the cables/cig plug u used to connect to dc? At 5:30 of the vid. Thank you.

[@Mumfy64]

Here is where you can get the plug. amzn.to/3NkC355

[@hellobrae3144]

@@Mumfy64 thank you

[@hellobrae3144]

I just received mine today, i tried to put all together but it’s not working. Screen is flickering with screen showing 03 (which i think is power supply error) i tried to restart but still het the same result 😔

[@user-R1]

Is there a difference in heat output between the 2 diesel heaters the toolbox version is a 5kw and other is 8Kw what’s the fuel consumption like on these

[@Mumfy64]

I haven't noticed a difference in heat output between the two. I still need to run a full night test on these to see how the fuel consumption is. I can say that depending on how high it is run will affect how fast the fuel is consumed.

[@tombeeks3406]

you shoud also have a back up power, if you loose power the unit cant cool itself and can cause smoke to exit from the air intake or even damage the gasket, be aware of this, it has happened to me running on a car battery

[@Mumfy64]

Great call out. I'll be sure to keep an eye out for any issues like that.

[@tombeeks3406]

Yes because if the units indoors it will smoke you out and possibly cause a fire

[@Mumfy64]

@@tombeeks3406 My intention is to keep the unit outside of my truck and RTT and only run the heat hose into the tent. So nothing will be indoors. But I can see if I were to run it to heat my garage.

[@DB07OUR]

Hi how did you get the exhaust side fitted the pipe I have is the same bore as the exhaust and won't fit ?

[@t.o.f.t.s.]

how the heck do you get the exhaust on. the tubes are the same size and I can't get one to go over the other. Also the exhaust coming out of the box is so small I can't see how to get a hose clamp on that?

[@Mumfy64]

I ended up pinching the exhaust end a little to make it smaller so that the muffler could fit, same for the end that goes in the box. It does take a bit to get the hose clamp on as well for the air. I didn't put one on the exhaust side.

[@t.o.f.t.s.]

@@Mumfy64 Thanks. That worked👍

[@legacyfirst]

My unit is missing F9 - the book says F9 is start and stop but it’s not in my menu. It’s the same unit.

[@Outdoor-Adventures]

Can you guy me on how to pair the remote? I have the Bluetooth version. Thank you

[@larrybuckner4827]

Is the red heater also hcalory?

[@Mumfy64]

They are both Hcalory products. Links are in the description box.

[@larrybuckner4827]

OK thank you very much

[@brandoneasterday4658]

Has anyone figured out how to change the briefcase style with bluetooth to Fahrenheit?

[@linemen71]

Any idea on how many hours of heat you get per fallon?

[@Mumfy64]

I haven't had a chance to fully test these just yet but other videos have shown or talked about a full 8 hours on the lowest setting.

[@vaskodimoski5690]

Why Is the fuel filter after your injector it should be straight after fuel tank in between tank and injection pump

[@stevencolby49]

Just seen you at Smith's in Sandy 🤫

[@Mumfy64]

Me or the truck… 🤔

[@stevencolby49]

@@Mumfy64 The Truck

[@BulletproofPastor]

Where can I buy the plastic extension feet?

[@Mumfy64]

If you order from the link provided, the feet come with the kit. Im am not sure if you can order them separately.

[@BulletproofPastor]

@@Mumfy64 I was afraid of that. I ordered mine from Amazon and it didn’t come with the feet. I’ve searched but can’t locate a source for them. Perhaps this could be a great production opportunity as someone’s side hustle.

[@FJREY]

With your briefcase style heater do you remove all the externals except for the fuel tank during transport? I was considering at the minimum to remove the exhaust hose, air intake along with the dryer style hose to pack inside of my Land Cruiser. What is your breakdown (if any) once packing up and getting back on the road?

[@garyreinoehl804]

What is the model # of the hcalory?

[@Mumfy64]

Link to the unit. kit.co/Mumfy/toyota-tacoma-mods-gear/6307975-hcalory-12v-5kw-dies

[@glennsurgey6206]

Hi how hot does the exit end of the exhaust get ?

[@Mumfy64]

I do not recommend you touch the exhaust.

[@joesalemi2414]

What does “PC” mean?

[@Mumfy64]

@@joesalemi2414 PC is short for Personal Computer. Think of the Mac Pro tower computer.

[@vinboughton4751]

How the HECK did you get the exhaust pipe on? Wholly cow

[@Mumfy64]

I had to put a “v” in the pipe to get the size to fit.

[@vinboughton4751]

Yea , they are both the same dang size. Lol ok will go try. Thought about just sticking the dang muffler on..

[@johnnywarren8270]

Literally the only reason I came to watch this video lol

[@hawaiianboy2003]

Check out John McK 47 video series on diesel heaters. At least check out the exhaust and fuel delivery videos. It’ll save you a lot of headaches! He’s Da guru! I’m going withe the suitcase model!Thanks!

[@Mumfy64]

I'll be sure to check those videos out. There is a lot of info out there and gaining an understanding of how these work is always a plus.

[@blackspruceroutes]

the exhaust pipe bend is too close to the ground/ floor

[@teaker1s]

Nobody uses air filter clamp to retain the air filter as it flops round. The exhaust upright causes condensation trap. No extension of controller for internal temp. Sadly so close and so far