The Demolition Ranch Ridiculous New Gaming Computer! TWITCH!!!!!

[@spelvox]

YOUR RESERVOIR IS FALLING OF THE BRAKETS!!! Just push it back in the brakets so it's straight. When you look straight at the pc push it to the right closer to the fans but be careful!!!!

[@omni057]

It is driving me crazy.

[@Tyler-oj4su]

Yea if that messes up the pc is screwed.

[@brianb6969]

I saw that also...It's Leaning to the left a little!

[@elijahdsouza]

Yup definitely do that Matt quick.....

[@TOF3290]

At his point. That is not holding it up at all. and its okay lol. The custom fittings and hard line tubing at thins point are holding it a 3 point zone. 2 bottom 1 top. I imagine the people who built it found that out really quick as to someone pushing that back closer to the front of the case didn't notice it ripped fittings off and that is how it could have been leaking the first time as well.

[@future_phonk]

That’s the most amount of fans I’ve seen in a PC build. And I’ve see a lot of crazy builds from Linus...

[@TheShadowStalker.]

lmao for real dude, linus be on some other shit but this just topped him😂

[@thelonelydekuscrub4817]

Yeah that’s even more than riptide

[@BaxterretxaB]

I love how they didn’t even talk about the specs at all. Not even a single thing was mentioned other than the fans and RGB and how it’s a “supercomputer”. At least read the prebuilt specs sheet.

[@burgir9985]

saamee lol except maybe some of his servers

[@sander261]

Well cert not experts when it cames to pcs

[@kellyharvey6037]

That moment when you immediately stop watching whatever your watching to switch over to Matt......

[@Trainson52Gamer]

Kelly Harvey LoL honestly

[@blackmesaoutdoors4863]

yep, that just happened! haha

[@hystericalnigga12345]

Always

[@williamhelms9245]

Kelly Harvey literally just stopped watch a Military Arm Channel video to watch Matt lol

[@jeffreybrown3204]

every time yes lol

[@itsthatguyfromthething]

The reservoir looks like it's at an angle or got loose, I'd check that out

[@timolive1]

You can see it's out of the top bracket, just push it back in

[@johnleonard3951]

There is a little more to it than just pushing it back in . I have worked with singularly pc mountd like that.

[@drakileinr7142]

right? plus you can see no connectors on the top of that res,all on the botton so nothing supporting the top,using a U brace was a bad idea for that,they should have put an actual mounting ring

[@Plane.]

I don't know why he got such a high end water cooling build he will have no idea how to do maintenance on it

[@Poop_Deck_Pappy]

@@Plane. yeaaah... that's going to be a real bummer for Matt when he get's a leak, or the fluid gunks up that HUGE ass mono block, or clogs a VRM channel

[@S0me2]

!!!!!CAREFUL!!!!! One of the Reservoirs has come loose, that's why it's at an Angle! The one closer to the Window

[@heathersplants5708]

Somebody better get his attention!

[@wadsefrgthzjkl]

look again its resting on the million fans on the bottom... this pc is a shame..

[@godiseverything4072]

Matt carriker is the biggest chad I’ve ever seen

[@byte5126]

Ikr, crazy that they missed that crooked Reservoir.

[@christopherconi]

Good spot, was wondering why it skew

[@ghosti79]

Everyone: My gaming rig is the strongest. Matt: My gaming rig has 50 cal shells and shotgun shells inside.

[@lambhdeargh]

So let's ignore solid state!

[@An0n145]

10/10

[@ghosti79]

@No Name Na we just love guns and 50 cals :)

[@lambhdeargh]

Before I was ten, I had seen the first soldier that was shot! He wasn't asking for caliber, he was asking for his mother! If you think you're Billy big balls, I'm thinking you're Billy no balls! This is for No Name, btw.

[@duanebrimhall2556]

The computer is turned on for the first time... Mere yells "Honey. we've lost power downstairs..."

[@wlehtola]

Was wondering if it'll make the lights dim at the very least, that seems like an awful lot of juice off the cooling lines alone

[@businessmail4929]

@@wlehtola apple or orange

[@VentusHarpus12]

Nah, the computer wouldn't do that it's about the Watts on the power supply! i say he probably has about 900- watt to 1200 watt power supply! that the power supply have a safety feature which would make it shut down!

[@DD-sw1dd]

NinjaRider777R Case fans typically around 2 watts of power each so even if you had 50 fans you’d only be using 100 watts (bare in mind with that many fans they are all likely never going above 30% RPM. Why have a loud system with that many fans?). A single watercooling pump can use 5 watts on the low end to 25 watts on the high end. Fans and pumps don’t use much power. You can run multiple fans off a single motherboard fan header. 2-3 fans per header isnt abnormal. 3x MultiGPU setups with massive CPU’s (like the Intel Extreme series), dual system setups, or LN2 overclocking is why those massive 1600w power supplies exist. For example, a single overclocked NVIDIA 2080ti graphics card can use 330 watts of power. GPU’s are the number 1 user of power in all gaming/vid editing/everyday PC’s. I own a custom watercooled system. It has 10 case fans with 6 of the fans cooling two 360mm rads in a single loop which cools my CPU and GPU. The system has a single overclocked NVIDIA 2080ti and an overclocked i7 5960x Intel extreme series processor. My power supply is a Corsair AX1200i. It maxes out at 1200 watts. Even with all the fans, the pump (running at max speed bc it’s a DC pump), the overclocked GPU and CPU, the 5x hard drives I have in the system, along with the large number of USB peripherals hooked up to all 10 of my Asus X99-e WS motherboards USB3 ports, etc... At MOST I only use 650 watts out of my 1200w power supply. I even have a 1000 watt UPS hooked up between my PC and the power outlet. 200w less than my PSU in my computer itself is capable of. Even with my computer, 2K Ultrawide gsync monitor, powered Focusrite audio interface, 2 powered KRK Rokit studio monitors hooked up to the UPS it still comes nowhere near 1000 watts. With his 2 GPU’s and CPU in that system he’s probably maxing out at around 1000w during EXTREME stress testing with CPU and both GPU’s running at max capacity.

[@Gullible96]

Honestly I would have liked to see a collaboration with Linus tech tips

[@YourDMYT]

exactly what i was thinking

[@JackC92]

That would be awesome, I'd love to see Linus tackle the Magnum 😂

[@nickolaspassias13]

Linus networks the Mansion!

[@fuzzyslippahs8905]

Linus or bitwit would have been awesome!

[@pascalgagnon8748]

And that would've been a threadripper in it ,not a lame 9th gen refresh intel wich they labelled as 10th gen.

[@heyletsplaythis]

“It’s like Lunkers trying to explain his corvette’s features”. 😅😂🤣😭😭

[@willkimel6149]

hey lets play this yep

[@MNTruckerBear]

30 fans... For 2 vid cards and guessing the top Intel processor. Has be posted or talked about the actual build list? Haven't even heard of one, but even with a dual threadripper motherboard with 120 GB of 3300MHZ ram and quad 2080TIs.... 30 rgp case fans is just, "cool bro". Edit: didn't even look at the description for build details that he posted. Tsk tsk, threadripper trumps Intel.

[@edde3244]

@@MNTruckerBear 3300 mhz is not even fast and its called rgb

[@MNTruckerBear]

2400 is the standard budget RAM speed, 3300 is 900MHZ faster than standard and 433MHZ slower than top tier... RGB is literally just flashy lights. Anything else?

[@TheLordNugget]

@@MNTruckerBear that still doesn't mean much. 3300 MHz is really kinda average these days. There are plenty over 4000 MHz and at least one option available at 5000 MHz. Last I checked, that was far more than just 433 MHz than 3300 MHz.

[@johncarlomequiabas1837]

next video: "CAN AN OLD GAMING PC STOP A 50 BMG"

[@rewesicherheitsdienst1018]

that would actually make me sad, his old rig is better than mine :P

[@bryangates4591]

that woukd be sick lol

[@SheepdogSmokey]

@@rewesicherheitsdienst1018 Don't worry, yours is light years better than mine, as I don't have one.

[@BaggyCEO89]

Hahah

[@Ben-ig3bf]

No. But can the new one?

[@rgkulow]

"I'm unplugging everything out of the old CPU" Matt don't worry we can tell you are not a PC guy lol

[@bagnome]

You mean you don't unplug every pin manually, one by one?

[@coreyhickman9082]

Lol even though before that he corrected drew on the processor, drew called it a radiator by mistake which in both cases its a mistake chill bud

[@Otiss127]

@@bagnome No bending them one by one :D

[@godiseverything4072]

Matt carriker is a chad

[@RedPigeon_]

He has no idea how much of a wet dream that PC is.

[@phillipkaczor8577]

U know instead of jigsawing u could've unscrewed the handles

[@Kcii-99]

nah it had lights running in through the handles

[@Sociopath33]

those "handles" are railings to keep you from blocking the air intake and exhaust" i wouldnt choke it up any

[@thedrumman2019]

@@Kcii-99 the handles didnt have lights. That was just the reflection of the lights from in the pc.

[@ivanfromtheeast4709]

Or he could just turn it around

[@kaosboob]

@@Sociopath33 i think they're there to stop people from getting sucked in honestly :P

[@TonyTen13]

If they got Linus tech tips over here to build him a pc. I would love to see him make Linus shoot the 500sw and a 50bmg

[@david1235102]

Would've, could've been great crossover. If they made it, it definitely would've been an AMD build though!

[@TitanRL1]

i'm surprised they didn't do linus. or jay. both have built celebrity pc's before. and xidax hella upcharges

[@Intrepid17011]

@@TitanRL1 True, Jay would have been perfect. Hes also into Guns and Cars. So much potential.

[@aldrel04]

@@TitanRL1 I think the build was sponsored tho

[@simonoi11]

@@TitanRL1 also what the heck is up with those lines ?? I have no idea who xidax is and how much they upcharge but seriously if the PC is sent in such a rugged box I'd expect it to be pretty freaking pricey so having these coolant lines just going straight from one place to another looks so effing bad. At least have 90° fittings jeez

[@halo2030]

The custom water cooling alone is more expensive than my pc.

[@ethanarnold5983]

I feel that hardcore

[@ethanarnold5983]

Actually his old pc is almost double mine

[@kaden612]

same lmao

[@ignaciorestreporamirez4197]

No, I was looking at the prices and it isn't that expensive, the basic computer is only 1200 dollars

[@blackmesaoutdoors4863]

my thought exactly!

[@TKacys9HR]

You need to get a really good surge protector/ups for this man. That's like a $15,000 computer. Don't just plug it into the wall!

[@Elmer_RedEagle]

Its built into the PSU on this system. But it never hurts to use one regardless. For 500$ with a 10 year warranty, you bet your ass EVGA built this PSU tough and with built in protection.

[@954eb]

He probably has one for his entire house

[@dashausdesamadeus9557]

@@Elmer_RedEagle You mean they have UPS on the PSU? Damn thats pretty neat

[@ericlewandowskivlogs]

Agreed, I run an ups on my gaming PC and my router and modem.

[@BIOSHOCKFOXX]

@@Elmer_RedEagle & @Tony K A lot of modern PSU's will protect your system, and for such a pre-made PC build the PSU was specifically picked and probably has a unnecessary 80+ Gold or Platinum certification, so it's pretty much guaranteed it will protect without additional external UPS. UPS for gaming rigs, or in general, in home conditions are useful if you got a power blackout and you can keep using your PC for some time before UPS runs out of collected power, or shut the PC safely off. But any decent PSU should guarantee you a protection from surges.

[@Liam-ir6xm]

Just wanted too say. if you havnt fixed it yet that your resivoir is hanging off. it has popped out of its mount. just be carful when pushing it back into its mount that the rigid tubing doesnt pop out of the fittings. thats the exact reason i use a clamp style mount for my res and not a pop in pop out style.

[@RemyKBartels]

Next video: how many bullets can my gaming computer take after i rage quit

[@blackmesaoutdoors4863]

I'd watch!!

[@joshuachristensen9731]

Considering he's picking up Escape From Tarkov, i give it a week... that shit is HARD

[@sheepgaming4761]

Its a 15000 dollar gaming pc btw

[@emilpanchen2732]

The reservoir doesn't look like its held in its brackets properly, if it isn't its just being held in by the water pipes and could fall out and spill coolant everywhere. Might want to check that

[@TOF3290]

I am assuming that is the fault of the custom tubing. Looks like it is attached at the very tips of that bracket attached to the radiator.

[@TOF3290]

Also at 18:48 I just noticed you can see it is not even touching the bracket on the radiator. Tho it is possible it is attached to the other radiator sitting behind it. So they both could be attached, and that bracket on the radiator is just for stability in case it was to move?

[@TheSpec1234]

He knows he mentioned it in his stream he's doing.

[@williamterranova1429]

6:50 That thing is called a mono block, it is like a normal water block for the cpu, but it also cools the vrms

[@freddiecoulson7202]

ik, listing them talk about computers hurts

[@Kyrenthar]

@@freddiecoulson7202 yep.. then he goes and calls his old tower a CPU..

[@onigiririce2642]

"I just want a really nice gaming setup." Thats more than just nice

[@CarlosMendez473]

"My old computer was about 2 and a half years old" While I write this on my soon to be 8 year old i7-4700 hahahaha

[@BigBad21]

Carlos Méndez damn time really flies

[@Burn377]

I literally just retired my 5 year old 4790k rig. It did me proud paired with a gtx970.

[@pangkan270]

You know how they say dual core is not for 2020? Yea Im still running a dual core laptop and I game on it.

[@Zankaroo]

I just bought the last of the upgrades for my old i5 4690k, 8gigs 1600 ram, gtx 780(down graded to a friends old 680 because 780 broke). Moving to a Ryzen 7 3700x, 16gigs 3200 RAM, and have already been running a RTX 2070 Super.

[@gyorgysanta145]

Laughs in 3570k.

[@igrvks]

That crooked reservoir tank really bothers me. The piping job could had also been given more attention to, given the price point of this product.

[@badfudro]

first thing i saw was the res was popped out of its top clamp. its bugging the hell out of me

[@Baldwin_media]

@@badfudro that and 30 fans... there is no damn need for 30 fans..

[@s0ck_net278]

i think its not correctly mounted

[@Sahtoovi]

Yeah, I think that it wasn't a good choice to just make the pipes go straight from A to B, instead it would look better if they were completely either horizontal or vertical and not diagonal. Kind of ruins the feel of the whole PC in my opinion.

[@DrFraanky]

I just think it popped out of the clamp during transport tbh..

[@Jordan-bv7on]

How does this man run 3 different youtube channels, a merchandising business, own a vet clinic, work on an abandoned mansion, and STILL have time to make a gaming channel? lmao

[@sturek]

don't forget having what appears to be a great relationship with his beautiful wife and being a good dad to his three kids...

[@green7449]

Have a wife who actually supports your decisions and watches the kids.

[@jacrispiejackson69]

Jordan and 2-3 cars

[@Burnerisbrowsing]

This is when non computer people try to talk about computers😂

[@VolumeZero374]

I know right

[@dieselmechanictoolholicand7896]

@@VolumeZero374 idk nothing bout computers but i know this is cringy lol amazing looking computer but jebus

[@SaiMorphX]

I share the sentiment, but at least they love it!! Matt will already tell you he doesn't know, but give operator drewski time, eventually he will look back on this video like "DAME!!!" maybe like Linus in his... nah, even at NCIX he was this cringe, anyway, drewski will get there in time!!

[@Endgame711]

Lol "reservoir for the water to sit over the radiator" lol the Cpu water block. They love it and that's what matters

[@bakkywlu326]

Operator Drewski: "...for the nerds out there its like an i5..." Me: "Which one? Theres like 10 of them..."

[@lucasschultz3811]

Yakkywentwakko23 it really doesnt matter he just said it as a basis

[@kiakingofcars]

Its Intel, so probably has some number you will never be able to remember. It an i5 5240k

[@bakkywlu326]

@Galaxy TS2 oh i was talking about the generation amount, but you're right there probably is somewhere around 200 different i5 models

[@ANF_94]

@Galaxy TS2 6500 or 6600 if I remember correctly. Can't remember if it was K series or not.

[@MasterBasser]

i mean, i5 is generally quite terrible in 2020.

[@Beefy-Tech]

I have seen high end rigs, but damn, this is a whole new category XD.

[@simplistic4946]

look up LinusTechTips or JayzTwoCentz

[@eliassanchez420wakenbake]

Simplistic they’ve built cool stuff but this is there right with their best builds

[@TheHighborn]

then you've not seen high end rigs trust me

[@eliassanchez420wakenbake]

Highborn I’ve seen 100k rigs and such. That were more beefed out

[@TheHighborn]

@@eliassanchez420wakenbake 100K a server rack? lol most high end dual water loop system with all the bells and whistles go around 15k

[@way2sh0rt07grad]

Me:” I’ve got 8 fans with liquid cooling” Matt: “ 30 fans with liquid cooling” Me: “ You win at everything”

[@TEKplayz]

not everything, his brother has a better stash

[@TheDuckumz]

One hell of a rig there Matt, but do me and the rig a favor and slide it as close as you can to the desk to give the front intake fans some more room to breathe. Might want to rearrange them monitors so your main is centered too otherwise you be in an uncomfortable position and get them pesky neck cramps 😉

[@liquidsquid5295]

it has a glass panel anyways

[@-navi5238]

@@liquidsquid5295 that doesnt matter and doesnt change the fact that the front intakes need clearance, glass is a solid and wont let air through. pepega

[@TheSouthernLiberal]

Yea that was my first thought was what heck is he think about putting it that close to the wall????

[@Asmith-1111]

To the ppl that are telling him that he has a glass panel on the front so it won't matter if there is no clearance: there isn't a glass panel on the front, so it does matter.

[@Asmith-1111]

8:29 (pause it first dude don't even say it)

[@subsgob00m]

As someone who does custom PCs and case mods, i'm honestly disappointed by that watercooling setup. The component choices are great for both the hardware and the cooling, but the layout of the lines is amateur at best; it looks crowded and chaotic especially with so many fans on all the radiators. They used PETG tubing but didn't bother doing any bends at all, just straight runs and heavy reliance on swivel fittings. It wouldn't surprise me that some leaks develop as the system ages with so many potential points of failure. They also bothered with so much packaging externally to the system, but didn't bother putting anything inside of the machine to hold all of those sensitive components in place. Doing that one thing alone would have at least kept the reservoir from coming loose from the upper mount. I hope that all of my qualms prove to be pointless and that you have a wonderful experience with the system for years to come, but I suspect that this machine will turn into a huge headache when you have to do maintenance in the future.

[@danielredziniak2996]

Shut up boomer

[@subsgob00m]

@@danielredziniak2996 Constructive.

[@endrminr8386]

i agree, while 30 fans with rgb and 3 360mm+ radiators can look crazy, it really is pointless. internal foam for shipping would have definitely helped the first time around

[@Alec7272BackBaby1]

@@danielredziniak2996 Your videos show the amazing skills and knowledge you have to offer the world.

[@sharewolf10173]

I was always wondering who was that one or two guys that always had to hit the dislike button on any video. Save a nun, thumbs down. save puppies ,thumbs down. nun saves puppies, thumbs down. For every 100 wipes there's always one or two thumbs down. Now I know who it is.

[@SheepdogSmokey]

5:17 - Matt, if you don't, in your first stream after this, say "I'm here with a lot of fans" I'll be disapointed.

[@tristanbowman7098]

"That's like Lunkers trying to read the specs on his new c8 Corvette. Shots fired" Lunkers: At least I HAVE a c8 Corvette. Shots fired back.

[@tristanbowman7098]

@Howie Felterbush unless it doesn't. And stop talking about all the "rubbing" you are into.

[@fulldangle]

@Howie Felterbush Shut it

[@ThatGuy3714]

Matt has a C6 and C7. That makes 13. 13 is bigger this 8. mauths

[@marvindebot3264]

Me watching this in 2022: "Ha, it will be outdated already" Me 5 minutes later: " Holy crap those specs!" That thing is still insane, wow.

[@dabombcoming6095]

My man's is so wholesome, he's so excited for whatever he's doing and I still don't know how he keeps such a good attitude no matter what happens Edit: reading the specs. 2 2080ti's? AND MARKED WITH DEMO RANCH? Now that my friend is how you flex.

[@Chris-jd7up]

one of those cards costs more than my entire setup

[@Plane.]

Idk why he went so high spec when he has to do maintenance on that loop he is going to be lost or he is going to have to hire someone to do it

[@liquidsquid5295]

@@Plane. could call linus

[@williamnorris2717]

2 2080ti's and uses 1080p 144hz moniters wtf lol.

[@ChiefsFireman]

@@williamnorris2717 1440p 144hz.

[@howardkey6152]

He said his ac Bill is going to be high. No Matt you’re electricity bill is going to be HIGH

[@williameldridge9382]

That's the same bill....

[@sion9611]

I think he meant from the exhaust of the pc with all the fans removing heat from it he’s going to have to keep his ac on more ... it makes more sense that way

[@howardkey6152]

Joel Gonzalez I know it’s just funny he thinks the ac will run the bill up more than the pc. I think they probably both pull the same wattage

[@randomhobbies5796]

That pc prabobly has 1600 watts psu so electric bill definitely going up

[@howardkey6152]

Random Hobbies 100%

[@TheTacoGuy32]

Just wanted to say my little girl (11 months) loves when I watch your videos! She stands up and dances every time your intro song comes on! Love the videos Matt, true inspiration of positivity

[@ColonelK0rn1]

2020: the year that Matt starts getting serious Dadbod.

[@mccrippleyg5228]

bro he’s jacked wym.

[@Im-not-clever]

Cleetus just won the freedom 500 with "DO IT FOR MARK" on the hood, it made me VERY happy. Much love bud!

[@paytonblair1321]

Andrew Inman Spoiler warning ??!!!! Damnit...

[@Im-not-clever]

@@paytonblair1321 sorry, you should have bought the 9 dollar ppv lol

[@Nthnelsematrsbutme]

Why tf would we buy it when it will be free to watch here soon

[@paytonblair1321]

Nthnelsematrsbutme Exactly

[@bikelifeben7887]

Payton Blair broke boy 🤣

[@thomassiegmund4424]

Drew reminds me of Mark and even sounds like him. Let’s see more of Drew on your Vlogs

[@aquariumaddict]

You know Drew has his own channel, right?

[@thomassiegmund4424]

What is his channel

[@donnaskin]

@@thomassiegmund4424 OperatorDrewski

[@thomassiegmund4424]

I will check out Drew’s channel. I was lead to Marks and then Dr Lee’s from Matt’s channel They are such a caring family

[@Novagunner]

just go to drews channel.

[@xanny_land_]

I rember when you first started this channel, you were hunting wasps, scolding linc. Good times

[@joelguzman9280]

Oof good old times. Them slides were the worst lol.

[@diamante1ification]

49" ultra-wide would go great with that and also good for editing.

[@Danthrax66]

That reservoir with all the fluid in it closest to the outside glass panel looks like it is falling out of the holder a little bit, you should be able to push it back into the retention brackets. I'm surprised they don't use any foam pads inside the case for shipping.

[@nomprenom9337]

Man it's been more than 3 years that I've been watching you and I remember when you built this old pc with Drew, it's crazy I feel you're are a part of my family this is why I felt so bad for Mark may he rest in peace.

[@Myles_gs]

Normal person: let’s take these handles off to make it fit. Matt: get the saw

[@johncage3025]

Myles the handles are the minimum distance it has to be away from the walls to allow airflow through the fans

[@brendenperry3770]

Our mind: hand saw Matt's mind: M249 SAW

[@Siah_hell]

damnit someone already posted the M249 Saw joke

[@thereddog223]

@@johncage3025 pretty much

[@lenax4016]

Used to be a hardcore gamer then i joined the army and worked there for 9 years i got discharged recently. Now im home fighting cancer and depression without a pc and only way to kill time is by watching you. Thank you good sir for providing me with entertainment during these hard times 👏

[@jayzor1911]

Dude, I hope you're doing good!

[@elonsalienbaby4693]

My god does this man know when to stop?! 3 youtube channels, 2 businesses renovating a mansion now a twitch streamer????

[@MatthewAucutt]

I don't think he sleeps

[@sb859]

Husband, Father...

[@Ta2edGamer]

He works out as well. Beside hes been a streamer for years now he just doesnt have a full time schedule

[@luandreyer5589]

Legend!

[@delaneyfishel5826]

@@sb859 brother, son he does so much

[@likwidchris]

me: in the IT industry for over 10 years, still paying for my now 5 year old, home-built system, scouring the used market and sales to continuously improve it. Matt: [...] ... no I'm not jealous at all... 😑

[@puffman9053]

Just a recommendation but you should get some soundproofing panels to lower the echo in your little "cave". Keep up the awesome videos! Can't wait till your next stream

[@puffman9053]

@@kaelgaming3922 he upgraded

[@kaelgaming3922]

@@puffman9053 i just saw that

[@dogsidog0074]

Damn it's actually pretty sick that he knows the actual names for the PC parts, I was expecting a sorta cringe video with him just pointing out random stuff. I'm never let down with this channel

[@v0id0ut34]

8:04 my guy

[@huntertice3883]

@@v0id0ut34 I mean it probably is the central processing unit for his house

[@nofacedgoldfish6216]

I mean, he needs to know what stops a Fifty BMG.

[@Jazzyjaz420]

i was cringing a bit

[@0waverunner0]

they didnt know the parts. and it was cringy.

[@Jasta315]

That set up would cost about $15,000 from them. Can accomplish the exact same results for much much less, which i understand was not the point of this. I would gladly take this for free also!

[@pascald.1451]

Going AMD would've done a lot. 😅

[@cody_janssen831]

It’s weird how jacked and big Matt is compared to Drew who’s just a twig

[@adiver4336]

Brother things I guess. My older brother and I is just like Matt and Drew

[@noahhastings6145]

It's the opposite for me and my bro. He's older and a twinky twig and I could snap him in half.

[@SgtJohnRemairez]

Im Drew lol, I bet hes a memeister

[@williamfusee7441]

Matt: Am just unplugging everything out of the cpu. Everyone who knows stuff about computers: AHH. 8:04

[@stephenzimmerman193]

I cringed lol

[@CountryBoy724]

I came to this video with the intent on cringing a CRAP TON. I am happy to know i will be doing such..... i think.....

[@butlerdawgs78]

What's the proper move?

[@williamfusee7441]

KingintheNorth “am unplugging everything out of the computer” cpu is a component inside

[@williamfusee7441]

Stephen Zimmerman same lol

[@nickolivonkrain]

15:42 that transition made me happy

[@NickCasciani]

Matt, I just wanna say THANK YOU for continuing to upload videos. This whole virus mess is getting a bit depressing and your videos help to brighten my day. Much respect...

[@hdw235]

When Matt's CPU costs more than my entire set up....

[@TitanRL1]

one gpu alone costs more than most peoples set ups lol

[@boodle4952]

when his fans cost more than your pc

[@LuccaEsteves]

When his computer costs more than your house

[@EddieMendoza-bd1us]

hdw235 probably costs more than your car 🤣💀💀

[@williamfusee7441]

I feel that..

[@pepsidude2007]

Matt: look at my gaming computer!! Me (take away) : how not to cut wood table!! 🤣🤣

[@codybrown3946]

pepsidude2007 he would have been better to use the 240 saw 😆

[@cotyc6691]

Why not a saw saz

[@stephen9894]

@@codybrown3946 or just unscrew the handles from the front of the case

[@Darkhalfcustoms]

OH wow 3% they really went deep with the discounts on that code.

[@thestorm7151]

"They look like they belong in a computer lab in elementary school." You brought me WAY back!! duuuuuude. lol love it.

[@vgilalejandria]

Small recommendation about the PC, you should move it in a way that has more airflow... right now it's getting blocked by the wall.

[@endrminr8386]

i noticed that too, but he does wanna show off all that rgb... maybe place it at an angle so it at least gets some air flow

[@ozzihaka]

Maybe wall mount it somehow so more airflow and to show off the RGB's

[@TitanRL1]

with 30 fans and liquid cooling the front intake being a little blocked is not going to do much, especially when you consider it has an inch and a half of space at least due to the handles being there anyway

[@TOF3290]

Also with the amount of air it is going to pull from under it with all those fans shouldn't make it an issue.

[@ivanme6217]

Never realized how much operator Drewski looks like Mark until now.

[@Toximisity]

When you realize those are probably 2080tis and 5 months later, the 3000 series comes out. Kinda hurts

[@deecrazedninja8922]

Imagine buying a 2080ti for more than 1200

[@Toximisity]

@@deecrazedninja8922 lol, especially when the titan. Replacement is literally 300 bucks more

[@g2145cal]

@@deecrazedninja8922 newegg....2080Ti going for 2300 and non-watercooled. shame on newegg for gouging

[@michaelmartini4979]

Matt ik the dyed fluid looks good but you should probably drain the loop and change it to distilled water bc the dyed fluid can cause the loop to clog

[@michaelwesten3532]

I'm so glad somebody else noticed that besides me.

[@rusteeznutz]

How do you know its not dyed distilled water in it?

[@michaelwesten3532]

@@rusteeznutz any dyer fluid will eventually fallout over time, regardless of what the dye is made of and who made it. It makes a huge mess to clean afterwards. Pure distilled water leaves almost no residue behind.

[@williameldridge9382]

If you maintain your loop, like you should, and as often as you should, that is a non-issue.

[@demonmit1390]

Koolance fluid is one of the best. stuff has a lifespan of 3 years. even the dyed stuff. he wont be having any issues.

[@malcomlife684]

it is like lunkers trying to say the specs of his new c8 corvette.. ohhhhh no he did not say that!! LOL

[@dk-michael]

Plz get that resever back in it's brackets, before it is falling out at the bottom too. It looks like the bracket is there, so just push it back in. It is hold by clamping pressure.

[@VolcomBD91]

By doing so , with hard line tubing i feel like it could "pop out" of the fitting :/ But surely he need to get this fixed

[@johndevine3633]

This was amazing. Gaming PC's were my first love then guns. And listening to how girly you got over that beast of a machine made me happy. That's every computer needs dream. I hope you enjoy. Next time you have to built your own to get the full experience

[@johndevine3633]

It's honestly easier to build a pc than it is to break down a fire arm clean it and put it together.

[@schocker1997]

Finally, he's playing tarkov! He's gonna love that game so much.

[@duffmcgruff2831]

Is Drew gonna do the maintenance for you? Water cooled builds need some Love regularly with flushing the liquid and rads out so they stay working properly.

[@inquity6]

yeah that's gonna be a problem he did say he had an air cooled graphics card and he didn't know what the cpu water block was so I doubt he'll know how to drain the system.

[@feedmyneed6476]

@@inquity6 I think he can figure it out

[@kiakingofcars]

My old water cooled system is 10 years old with the original water 😂

[@MrTaco-wo6le]

Should watch linustechtips

[@LorSupra]

":My tech nerd brother Drewski" *Doesnt know what a waterblock is*

[@JamesonMcree]

literally was thinking the same thing

[@bryanjk]

He seems pretty knowledgeable with everything else so I gave him a pass I'm not knowing the name of a water block.

[@jarrodfield3686]

*Monoblock

[@joshuacheung1066]

IKR HE SHOULD LEARN AND JOIN THE PCMASTERRACE

[@Meme_Man-]

Then FPS vs HZ for the display. 144hz isn't the same or more than double 60fps ffs. You can still have higher than 60fps and see a difference on a lower Hz display. That pissed me off so much

[@zaross2781]

"its an extra reservoir" ow my soul (its a mono-block for the cpu and the VRM)

[@danjep2328]

is it just me or does the front coolant reservoir look like its off at an angle?

[@davidhakadoober._1-]

Was listening from across the room and realized how much drewski sounds like mark

[@taz41373]

My wife thinks with the moustache he looks like Mark as well.

[@benlogan2622]

10:13 when he talks about the cord WoW 😲 he sounds so much like mark. Drewski sounds like the functional IT guy Matt the functional shoot it fix it hang dog just give everything a go and mark was the engineer man 👨

[@alicea153]

Absolutely true!!! I thought the same...so sweet...

[@estout324]

Drew is what Matt looked like before he took the Captain America Super Serum.

[@faulty4350]

That's what I was thinking 😂

[@johnhancock6374]

For someone whos into guns and custom making his own pcs, this is awesome.

[@Crimson_201]

I really wanna see Matt reaction when trying VR racing or flying for the first time.. I mean he got the rig to run two index VR headsets at the same time

[@Jeff_S...]

He would love HL-Alyx. The gunplay is tight, right down to popping in mags, racking the slide, shooting from cover and even modding the guns.

[@mamaicymouse]

Forget the puter, let's go over the Datsun Z plz.

[@Failsafe31]

Head over to Drewski's new channel then, he's got a video or two on the new Datsun

[@TruckingEvans]

Support Drewski if you wanna see his car

[@iIoveualways]

OffTheRanch: WE GOT A CUSTOM GAMING PC!!! LinusTechTips: 👁👄👁

[@crzyvaps]

RGB

[@jameslastname9171]

AMD

[@eturnus732]

I'm sure others have told you but that reservoir is tilted out of one of it's mounts.

[@brandonroberts4869]

Im so happy he called out Lunkers. That whole Corvette reveal video had me in pain. How do you buy a car worth over 60k and not even know the hp of the engine???

[@flutedscissors9655]

@Bolsonaro 2022 bye

[@youngchild9294]

@End Leftism hes not gonna stop just because of your opinion because hes making bank.

[@saltysteel3996]

Never leave a computer on the floor unless you want it clogged up with dust 10 times faster. Make a nice little foot stool stand for it.

[@mmmaiamm3078]

super rigs like that already come with foot stands to lift it off the floor already no need. 15-20k pcs already have that inmind

[@nickb317]

I had a Thermaltake case that I had to raise off of the floor a few inches, but the dust problem never went away. So ripped all of the parts out of the case and wall mounted everything. Haven't had to clean it for almost 2 years now. Changed my life!

[@josephpmans]

especially with pets in the house

[@keithblank5]

@@josephpmans or all that saw dust that he didnt get cleaned up properly

[@TRD_2zz]

or the fact that it is sitting right next to the wall and can't draw in air effectively lol

[@illyadass]

Jesus, when he started reading those specs i felt extreme jealousy flow through me. Also thanks for reading the specs even tho you dont know what all of it means!

[@jameslastname9171]

When he said Intel instead of AMD, I tuned out.

[@TitanRL1]

@@jameslastname9171 *thread ripping intensifies*

[@elijahdsouza]

Ikr

[@suhwanhong2250]

@@jameslastname9171 yeah lmao he has a 10980xe which is like the most useless processor (if you factor in the price)

[@casper9256]

Its probably ok as in wont affect much but.. the fans on the right side (after you brought it inside and put it next to the desk) the ones next to the resevoir, close to the wall. You generally dont want intake or ouput fans that close to a wall because the heat is going to build up and you will be cycling in air that is warmer than the rest of the room since the smaller space isnt going to have as much circulation, so it will be cycling preheated air and in short not doing its job as efficiently. Beautiful rig btw. Im jealous that is the most beautiful, artful piece of machinery ive ever seen. Youre going to have a blast gaming on that monster.

[@willdoeseverything5091]

Oh boy did he just say 3 percent off 😂

[@MissLilyputt]

WillDoesEverything I thought he misspoke until I looked in the description. Now that’s an April Fool joke if I’ve ever heard one.

[@nathanielmortimer]

MissLilyputt it seems like a joke, until you realize how much they cost. It seems really generous when it is for something that expensive.

[@TheOn3ManLegend]

"So I'm taking everything out of the old CPU " lol that's not a CPU Matt

[@MissLilyputt]

Glad someone else caught that too. LoL

[@chrismilito393]

Watching anti-gunners in my state of NY trying to buy up guns and realizing how stupid their gun laws and waiting periods are, gotta say today was a good day

[@blackmesaoutdoors4863]

Yep, same happening in LA.

[@MandenTV]

RHINO 54 Spoken like someone who’s never tried.

[@blackmesaoutdoors4863]

RHINO 54 you can’t eat guns but you can defend your food with it if someone tries to take yours.

[@rhino5419]

@@blackmesaoutdoors4863 that is paranoid as hell.

[@blackmesaoutdoors4863]

RHINO 54 it is! But if you’ve ever lived through it once, you’ll think like that for life! Im branded. Lol

[@MrDomNoms]

A bit of advice.. build something on the wall to mount your mic boom to. If you have it mounted to the desk, its going to pick up viberations off hitting the desk with things and come through the mic

[@connermanning5837]

You don’t need that much cooling for overclocking. Yes, cooling does help with performance on GPUs but you can run a stock cooler when overclocking. The cooling is very cool but also insanely overkill. 10/10 on the custom loop tho

[@youngchild9294]

under max load the gpu's will stay under 40 even with 2+GHz and the cpu with oc will stay under 60, all while staying silent.

[@bgoomba2002]

You MUST get a VR headset with that system. A Valve Index or Oculus Rift S - I think you would appreciate playing PistolWhip

[@joaquinrp7784]

Dude, Boneworks, Half Life Alyx, etc etc. I could only dream of something like that

[@hotrods4x4s18]

When you hit the screw you straightened the teeth on one side of the blade which made it want to turn

[@Nunya_Bidnaz]

holy sheeeeeeeit... I did NOT expect such a crazy rig from you matt.. I shouldve known you would do your homework and get something crazy.. but jesus ... that thing mustve costed a small fortune.. Each one of those graphics cards is 1200 bucks.. for the base model with regular fan/air cooling.. start adding resevoirs and custom backplates and all the custom watercooling hard lines.. that thing is literally a masterpiece.. It is NOT easy to build something like that so well.. I am officially jelly lol. Good shit! hope to see some content about this thing in the future.

[@TheDewMan328]

THE SHOTS FIRED AT LUNKERS GOT ME

[@lordvader3283]

It would have been really cool if you did a collaboration with LTT.

[@petermuller7687]

They also would have put a lot more care into the loop and mounted the reservoir like it's supposed to...

[@lescoe]

You misspelled JayzTwoCents

[@tpss3834]

Or jayztwocents... too many to name who do custom pcs. Jay does more in depth custom which i wouldve loved to see that with all the air brushing and everything he does. Hes also a watercooling junky. He would have had it perfect on all loops. Carbon fiber or anything hes done it all.

[@lordvader3283]

@@tpss3834 Yeah he does a really good job on his builds. But I don't think Matt would want to wait a year for a build ;). All jokes aside seeing a collaboration with any of the big tech KZbinrs would have been cool.

[@brianthaxton229]

When I saw Drewski I couldn't help but think for a second that Mark was going to be popping in the camera shot soon....

[@patrickj1962]

UPS (Uninterruptible Power Supply)? Levels out your power clipping off power spikes and filling in the power drop outs via the battery in the UPS... you know... a power strip for sensitive electronics? I have a $1200 gaming system I built 4 years ago and it is plugged into a UPS from APC (APCDotcom), an APC 550es from many years ago and even got a replacement battery for it 4 years ago. UPS's protect from power spikes and brown outs for power, telephone, and cable lines. Mine was a couple of hundred bucks 8 years ago and about a hundred bucks for a replacement battery 4 years ago. Has kept my computers, printers, huge LCD TV, and stereo equipment safe.

[@mr.d6186]

Thanks for the entertainment during lockdown. 🇺🇸

[@jameshughes9067]

I love your profile pic😂😂😂

[@xollst]

you're a saint after all that's happened recently to be pumping out so many videos, so many of us are cooped up inside T_T

[@alantrask6500]

I love when matt n rob diss and challenge each other. Shots fired awesome getem getem good

[@sirsteele]

Ok, so I'm at the upper end of your age demographic, but I really enjoy your content (and your attitude!) I've been into computers since the early 80s, and I can really appreciate how close to current state of the art you have gotten with this setup... really, it is awesome! And to think how much I enjoyed my old Commodore 64!

[@ninjaforce7]

Matt : Plays minecraft Creeper : imma boutta end this man's whole career Matt : Can my gaming pc stop a 44 magnum

[@ckck5]

I love how he bought this and hes gonna have to move all this setup to the new house lol

[@AustinsMain]

DO IT FOR MARK! HELL YEAH BROTHER!

[@her0gamez469]

I recommend getting monitor mounts so that you have more space on your desk.