The dream DIY BIKE JUMP // Free Downloadable Plans

You know that DIY bike jump you were asking us about? Well here it is, with free downloadable plans! This jump is easy to build, relatively cheap, fully adjustable and looks great. A huge thanks goes out to my dad, Larry (transformgripgear.com/) for being the brains behind this project.
Downloadable plans (Dropbox link):
UPDATED
www.dropbox.com/s/t5k29j7aom8... Ramp Build Procedure.pdf?dl=0
If you want to say thanks to Larry for putting the work in to share this build, I've set up a virtual tip jar through Paypal. It all goes to him, so feel free to buy him a coffee for his efforts! (Sorry dad, I know you're gonna be miffed at me for this, but too bad :D ). paypal.me/ryanandbeth?locale....
Here's a link to the VelociRAX bike rack we used in the video: bit.ly/velociRAX
Use code "loamranger" for 5% off until the end of May 2020.
Our Sponsors:
The incredible BIKES we ride: bit.ly/radbikz
Our WHEELS: bit.ly/blkbrdwheels
Our ACTION CAMERAS: www.insta360.com/sal/x3?insrc...
Our ONLINE BIKE SHOP (affiliate): www.theinsideline.ca/?afmc=1h
Use code: LOAMRANGER for free shipping over $75USD
Our HYDRATION PACKS: bit.ly/CamelBakLR
Our SADDLES/ Droppers/ Grips: bit.ly/SDGseatsandposts
Your next set of TIRES: bit.ly/MichelinLoam
Our SUSPENSION: bit.ly/ManitouSus
Our Technical MTB APPAREL: www.ridenf.com/pages/tlrd
If you want to use the same rad gear we do and support the channel, use the affiliate links below:
For your CAR mtb RACK: eRack bit.ly/E-RACK
Use code LOAMRANGER to save $200 on any purchase.
Where we find music for all of our videos:
share.epidemicsound.com/BFMDC
Our main action camera gimbal:
bit.ly/2WssiV3
Our other action camera gimbal:
Amazon: amzn.to/2vt1kom
B&H Photo: bhpho.to/2rtifEU
Our “big" camera:
Amazon: amzn.to/2vuU5ww
B&H Photo: bhpho.to/2C09Qen
Our on-camera microphone:
Amazon: amzn.to/2SFpvYL
B&H Photo: bhpho.to/2FbRU5j
The best memory cards ever:
Amazon: amzn.to/2SkZQFJ
B&H Photo: bhpho.to/2Fg1TGK
Our fancy motorized camera slider:
bhpho.to/2Y9DuIV
To find a curated list of our favorite video and photo gear:
amazon.com/shop/theloamranger
Instagram: / loam_ranger_mtb
Facebook: / theloamranger
Strava: / strava
Cheers!
#theloamranger #mtb

[@Grummycanader]

I’ve been lucky enough to work with Larry a few times. The man’s a genius and just all Round positive problem solver. Some person on set will say something like, “that would have been cool if we could’ve done this totally impossible thing.” Larry would over hear the comment and be all, “I could make that happen. I just need a few minutes to build a (something only Larry knows).” And he on the fly will just design and fabricate some feat of engineering out of random stuff on set. He does it so humbly everyone wonders if he has any idea how genius he is at all. Making like it’s no big deal. Meanwhile everyone on set has their jaws on the floor at the physics and engineering he drops in real time on the fly. There’s only one Larry.

[@BGH-VIDEO]

I think I am going to give it a try. I have really been missing having a jump at home and that one looks fancy. It looks like it can hold up forever.

[@siradinar]

Awesome design!! Just came across your video recently and ended up building my own. Thanks so much for the making the plans available!

[@blainharris3259]

So awesome, thanks Ryan and family.. will be building tomorow, will go good along side the manual machine/bike stand!

[@SethKendallD]

Awesome!!! I'll be building these this week for our sidewalk skills park.

[@JonSheppard]

So I built this today. I goofed on a few of the steps but I’m still happy with how it turned out!

[@MTBTrailRider]

I wonder about creating a version of this with a bigger 4-5 foot jump with more adjustments along the lip... We have a 4.5' jump with an 8.5' radius. It's pretty steep and many people who come over to ride it have a hard time at first. Could be cool to adjust the slope/radius to be more mellow for others testing it out.

[@Persiusmo]

This is awesome! Thanks so much for sharing the plans.

[@chadkehoe]

Thanks so much for this! I’ve been talking to my little guys about jumps and can’t wait to build this for them to grow on... and use myself too! 😉🤘🏼

[@TheLoamRanger]

Chad Kehoe awesome! It’s a fun one for everybody.

[@mountainbikingandbeyond8935]

You should make a teeter totter that can lock into place for a jump

[@Masm4n]

You sir, are a genius, exactly what I am looking for. Much appreciated!

[@NrmlGuyNJ]

Thanks for the great plan! I know what I am building this weekend!

[@djfunknuckle3375]

thanks larry. these look awesome.

[@RunBikeMike]

That worked really well. I might just make one for my backyard trail system I am building.

[@jobecopeland2315]

those mountains near 3:15 look unreal. great video!

[@TheLoamRanger]

Jobe Copeland the mountains around Canmore are beautiful! Cheers Jobe 🍻

[@dustydrums8]

Thank you! I’ve come into the possession of a bunch of scrap wood, and have been trying to come up with ideas for it

[@thepedalsadvocate7389]

Haha. Love it. I built a big bejesus basic pkywood and two by wood frame jump last week. 18 inches at top. No curve. Not adjustable. It is good practice and gets me comfortable with air.

[@adamh7522]

This rocks man. Thanks for sharing the plans

[@calebrivera3685]

That is one sweet ramp build thx

[@ajsonic2361]

Love the build😁 Family that stays together shreds together🤟

[@TheLoamRanger]

AJ SONIC heck yes!

[@fromxctoletssee]

thats awesome man thanks a ton. good luck and stay safe!!

[@EduardoNakiri]

Awesome! To be honest, I liked more your father's project... lol But thanks to share yours. I just made a ramp for my kids, with a few twists, just adapting to our trails reality. But the idea was the same ! Regards from Brazil !!!

[@ryancurry5284]

Your dad is brilliant!

[@LunchRide]

Your dad is a freaking genius! I love it!

[@TheLoamRanger]

Lunch Ride very true! Glad you like it.

[@dankasprick1801]

Under the jump cam was awesome!

[@kengregory1541]

These are so damn cool! Your dad is brilliant. One thing I notice... the fence board at the lip is only 50% or less supported. Probly gonna split on you soooner or later. Easy enough to replace, but some more framing underneath would prevent this. (A couple chunks of fencing underneath, run perpendicular, screwed and glued would make it stout) Or extend the existing 'joists' for full support. Add construction adhesive between and it could go for years. Cheers, great work!!

[@larrykelly9722]

Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.

[@shaebells78]

Would be great to see a run down on the kids bikes and skills oriented for small riders. My ten year old is mountain biking obsessed and due to move onto a dual suspension bike but there really isn’t much on KZbin that is quality like yours for the little up and coming shredders!

[@MegaSoyaMan]

Nice, and I love the music!

[@drewfisher317]

Nice job!

[@oliverarmedilla3710]

Looks awesome! cant wait to make one (or two) of these. :D

[@Trailblazerz710]

Sick!!! Thank you buddy

[@povteer]

that is just brilliant! 🤟

[@stephensnoddon4625]

done and it works!

[@intnsbiker]

My boys loved your ramp! What bikes do your kids ride? Cheers

[@fpainchaud350]

Very Cool!

[@ShutUpandRideMTB]

How long before Casey sends farther than you? That is a really impressive jump design, especially since there was so little waste and it fit easily in your car. Like they say, the family that sends it together....

[@TheLoamRanger]

Shut Up and Ride MTB oh man he’s already more natural on jumps, that’s for sure.

[@Zwern]

Awesome 👍

[@jacksonmtb6603]

That’s so cool

[@RcNickster709]

Cool design and great quality. Nice work looked like it worked awesome. Thanks for sharing thumbs up from me.. :P

[@nosreuter]

Sweet for real! Just one (odd) question. You like photography and cinematic scenes, how come we've never got to see the marvelous view of those awesome looking triple peaks @ 5.22 before??

[@TheLoamRanger]

Simon Reuter you’ll be seeing more in the future :D We just moved to town late last year, so it’s our first spring/summer in Canmore.

[@nosreuter]

@@TheLoamRanger Just did a little espionage on Google maps and WOW have you done some mtb cherry picking choosing that spot to settle down on 👌 Looking forward to upcoming content, you guys always produce great content and that with an awesome quality!

[@CandCForsyth]

Perfect timing, just yesterday I was re-watching the backyard video trying to see how the version one ramp was built. Thanks.

[@TheLoamRanger]

Colin Forsyth nice! Good luck with the build 👌🏼

[@NorthstarSanZbar]

Black 'n' yellow bike looks awesome! 🤙

[@christiansworldofwonder9059]

Liked before I even saw the video. 🙂

[@BikeLifewithRob]

Family fun Jump line

[@Rockerrobin]

Should add some backpack straps for those long hauls hey maybe you could pack it on your bike😁

[@fchp07hj18]

What is the best editing software for GoPro?

[@coldnordic]

I will try to build it this weekend after cenverting it to cm. A Quick question, what bikes are the kids riding? My son is asking.

[@TheLoamRanger]

Timothy Eichmann sweet! Casey is on a Rocky Mountain Reaper 24 and Tom is on a Norco Fluid 24.

[@coldnordic]

@@TheLoamRanger Thanks, I will look into them. My youngest one is 11y and wants an upgrade.

[@cmdmd]

I went ahead and got the MTB Hopper Coach. LOL Then, I will likely get another or a landing one. :)

[@averyphillips6778]

I want to start a MTB KZbin channel and just recently got a GoPro any suggestions?

[@miltoskara5339]

...why dont you show a step by step build guide video?

[@entwiningsplines]

Hi, I've made a step by step guide. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@1972mdc]

Maybe I missed it in the plans and video but you have 2 sets of ramp supports that aren’t shown how they connect

[@SunnySkiesInAZ]

My daughter and I are looking forward to building this design, thanks! What glasses are you wearing, they look awesome and mine just broke. Do you have a link to them?

[@benparker700]

Believe he's sponsored by Smith Optics

[@samdinsdale9695]

Smith wildcats

[@TheLoamRanger]

Here’s the downloadable plan: *UPDATED * www.dropbox.com/s/t5k29j7aom8csxt/Bike Ramp Build Procedure.pdf?dl=0 🤘🏼🤘🏼🤘🏼

[@stefanfriedemann3873]

thanks!

[@travisferguson5030]

On the last page of the plans it does not have the overall height of the piece

[@Mercury_EG]

@@travisferguson5030 id assume its not a 2x6 and that its a 2x4 because the 48in 2x6 pieces make up 8 feet total of the single 2x4x8

[@Mercury_EG]

Yeah man last page I think you may need to recheck dimensions, believe its a 2x4, not a 2x6. And I also made this plan in Illustrator to scale if your interested in posting it

[@Mercury_EG]

Or are you using the really tiny 2x6 scrap for that dimension? I managed to do it with a 2x4 and altered the holes. But yeah I can see it working a bit with scraps... 😅😅🤷‍♂️🤷‍♂️🤷‍♂️🤷‍♂️

[@kostyayatsuk2004]

I'm having a bit of issue with the measurement for the Lift Support. Can someone tell me what the height is supposed to at its highest (from the point which is 7" away from the edge, where both slanted cuts meet)? I tried to do a mockup of this using cardboard just to make sure and ended up with a Lift Support that was of the wrong proportion. Thanks!

[@dmplus2k]

Me too bro, anyone know that measurement?

[@entwiningsplines]

I also wondered this, but knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@gord962]

Is there assembly instructions by pic or video? The description probably makes sense for the person who wrote it out but "until the wood is 1.5" thick" doesnt make sense as I cant change the thickness of a 2x4 or 2x6

[@DanielEskenazi]

A 2x4 is in reality a 1 1/2" by 3 1/2".

[@mattkeegan7515]

Can you do a video on a how to build this? I bought the parts and it would help a lot if you could

[@entwiningsplines]

Hi, I've made a step by step guide. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@scottdickson2286]

What glasses are you wearing? Great Vid. Revy looks awesome

[@evenkristoffersen6501]

scott dickson he is wearing a pair of Smith wildcat

[@TheLoamRanger]

Wildcats! And that’s actually Canmore 😀

[@scottdickson2286]

The Loam Ranger my mistake. Should have recognized Three sisters

[@CD-fp7bj]

Looks great! Have you run into any issues needing more support for that top plank? Wondering if it would help to have more resistance to the top board twisting. Thinking to have a try at building it.

[@larrykelly9722]

C D, Actually the 2x4 supports under the top plank should be reversed. this will support the plank right to the front. My instructions to Ryan were not a clear as he made them on his video.

[@joshmendoza6816]

Hey I’m trying to put this thing together. Does anyone have an tips or better pictures how to assemble it?

[@entwiningsplines]

I've made a step by step guide. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@MarciaCristina-vk3qr]

It went together easily in less than an hour. kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.

[@adamcronin1468]

Not being a pain but i believe the lift support is missing a couple dimensions and the lip support is missing dimmensions for holes please correct me if im wrong about either

[@entwiningsplines]

I've made a step by step guide which covers how to size up the lift support. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@gabecunningham6508]

🤙

[@aidhanalfarizijunus4338]

Keren

[@danielkuberger9328]

Hey! could you reupload the link. When i try to open it. it says it has been blocked.

[@mrwhips1947]

do you als have a plan in metric?

[@scotti_wan_kenobi]

Use Google to convert the measurements.

[@TheLoamRanger]

I wish. Haha

[@pauljohnson1991]

what pencil is that? lol I want one!

[@gte717v]

Ha ha! “No worries.” Is that a reference to Kai, the camera guy?

[@TheLoamRanger]

Will Evans I’d like to say yes, but ... no. 😂

[@nonick933]

The link has been blocked by bitly. Super bummed, was going to build this next weekend for some at home training

[@TheLoamRanger]

Updated the link sorry about the delay!

[@RNicknackpaddywhack]

The link for the plans looks like it’s being blocked for some reason.

[@TheLoamRanger]

Just updated it! Sorry about that!

[@immoul]

what bike rack is that?

[@marcom690]

is this link still good? it says it was block by bilty as potentially harmful. I don't know.

[@TheLoamRanger]

Updated!

[@ryanl917]

It looks like the couple comments about the missing height measurement for the lift support have been deleted. Did anyone figure this out?

[@TheLoamRanger]

Hmm that’s odd. We haven’t deleted anything! I’ll see about getting that measurement.

[@ryanl917]

@@TheLoamRanger Sorry bud I started building this a couple days after the video came out. I stalled out when it came time to cut out the lift support - it's missing a measurement for the height. I saw a couple comments asking the same thing, I was just waiting to see if any else figured it out.

[@dmplus2k]

Hi mate, thanks for the plans.....did you get that measurement?

[@entwiningsplines]

Knowing the height doesn't really matter if you use the offcut from making the frame rail. I've made a step by step guide which covers that. Hope it helps you! kzbin.info/www/bejne/fpXRgqSFiaeaitU

[@stefanfriedemann3873]

can you pin a link to the plans at the top of the comments? the links in the vid don't seem to work for me.

[@dylanbikesthings3633]

Pair these jumps with the. adjustable drop @theshredist built

[@TheLoamRanger]

Dylan Bikes & Things perfect combo 👌🏼

[@Xtony90]

the link does not work anymore :( any way you can re upload?

[@TheLoamRanger]

Done :)

[@FeatureFanatic951]

I made this

[@jessebropez]

Did you give yourself more slow mo than your kids?

[@marcweidner2694]

Plans are no longer online

[@JhonnyBomby]

Reiupload link pls

[@TheLoamRanger]

Done!

[@MG-cj7ve]

"Just down the road from our house"... thats why you drove there by car... Sorry could not resist :P Good Video otherwise ;)

[@SpookNik4]

Link dead :(

[@TheLoamRanger]

Updated the link!

[@MucaroBoricua]

Could it be that you simplified the design because you don't have Larry's awesome building skill set? Just joking. Thanks for sharing.

[@lincolnpendleton8703]

IMPORTANT: the link to the plans no longer works. It says that it's been blocked because it is "potentially harmful". Super disappointing, I wanted to build these ramps but I might not be able to.

[@TheLoamRanger]

updated! Sorry about the delay.

[@eamonlee159]

What bikes are your kids riding pls do a bike check

[@Pitbbr]

Pas mal la rampe👌par contre ton vélo il est très moche 🤣

[@ryanandhiscamera4374]

First!!

[@4everIRide]

BOrrrrrrrrriingnggngngngng

[@eamonlee159]

401 viewer

[@armgor]

Warning: This URL has been blocked by Bitly's systems as potentially harmful. This is what I see

[@TheLoamRanger]

Updated the link!

[@armgor]

@@TheLoamRanger thank you!

[@churchcrewscooters4834]

First

[@kholiliuzzlahmaghfiroh1865]

Bla bla bla bla blaaa

[@leadershiplife]

Here's the direct link to the plans since the bitly link is broken. www.dropbox.com/s/t5k29j7aom8csxt/Bike%20Ramp%20Build%20Procedure.pdf