The Easiest Way To Make A 2-image Flip Lenticular Print Using an Online App on ViCGI.com

[@binhvutianh]

Thank goodness! Please keep this site alive forever :)))

[@uhli7126]

Love your tutorial, solved alot of my problems as a beginner. Also love crouton, get that good boy some treats :D

[@johnnyye2374]

you did great job.

[@Goatspite]

For the order of 3 images, would the middle one be the 1 they see when looking straight forward?

[@lenticular3dprinting]

No, you can choose anyone to be seen first when you align the lens. When you stand in the middle and move the lens left and right, the image will change accordingly.

[@mi0teddy]

hello. I followed your guide yet it didnt work. I think the problem came from my printer because the pitch test I printed didnt work, ofc neither with the pictures. Im using a 60.2 lens and the manufacturer did provide their own pitch test which shows 60.2 as the result there. Is there anything I should know before printing? My printer is Ccanon G500 series and I printed directly thru Photoshop. Thank you for the great guide again!

[@rudolphauguste2262]

hello, i have the same problem, my printer is a canon g510

[@lenticular3dprinting]

Did you try to print a 60 LPI sheet or a 60.2 sheet? If the lens pitch is 60.2 and you tested the lens on a 60.2 sheet then there is a good chance that all the stripes near 60.2 will show up completely solid. The paper you used can also affect the result. Did you use high-quality matte or glossy photo paper? If you just used regular paper the ink dots might spread too far and two adjacent dots can mess up with each other.

[@montitajantain5222]

50LPI can create 5 flip by website or not?

[@lenticular3dprinting]

Yes and no. Flip may not be good for 5 images but morph will probably ok because for morphing you don't care the clarify of an individual frame but just the shape changing.

[@yulasharm4723]

please add more paper option like 4R 8R

[@Manota7adyat]

You are so sweet ❤