The Easiest Way To Run a Winch With Flysky Radio (No Hack)

[@renatopavicic8861]

Epic hack! By far the most simple way to make winch work, really smooth, and intuitive way to operate winch. I have the same radio and winch as you, and it works like a charm. Thanks for sharing this, saved me lot of trouble with programming.

[@mitchcook9785]

I've bn building a scx10 with a plow and this video helped me fix my problem on hoe to move my plow with the remote u just saved me a huge headache I've had for about 2 months on figuring it out or buy a new remote thanks man awesome video my plow works perfect now again awesome

[@matthewsilva2829]

Great info. I'm running an Atlas servo winch and was so close to getting it right with reversing ch3. This is 100% better. Thanks for the tip and vid. Crawl on!!

[@kieranjimmy4844]

i dont mean to be offtopic but does any of you know of a way to log back into an instagram account? I was dumb forgot the account password. I would love any tricks you can offer me

[@hughbriggs5440]

@Kieran Jimmy Instablaster ;)

[@kieranjimmy4844]

@Hugh Briggs Thanks so much for your reply. I found the site thru google and im trying it out atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@jethroboorer2860]

Thank you very much works a like a charm.. 1 problem though when I leave the winch plugged into channel 3 it unbinds to the receiver when I turn it on. Just turn it on then plug in the winch control and all is well. Thanks mate great video.. oh n chew your gum man good on ya don't listen to those ballbags

[@nolengerke552]

Same Issue. Servo on channel 3 forces the receiver back into binding mode, if i unplug, unpower, repower and plug servo in after powered up, it works fine til next power cycle.

[@Rustyadds]

This is brilliant. Thank you so much for this

[@ptalbany]

thanks for the great how too I watched so many others try to do what you just did and they had you jumping through hoops now off to re do my winch as I just hooked a DPDT switch to it now I have true wireless thanks too you once more thanks

[@Moyersteven1]

Glad I could help!

[@Salty_reviews]

Nice! I could probably do that to shift the 3 speed on my high lift.

[@KoD83]

Nice idea! I did this with my GT3C, I dunno about the 20% ch3 left, it does nothing... but this still works: - CH3-TRIM: (Right) pulls rope in / (0/Left) stops - CH3-BUTTON while Trim-(Left): lets rope out / again: stop / ... - CH3-BUTTON while Trim-(Right): lets rope out / again: pulls it in / ...

[@udinmaker]

very helpful

[@advoet5763]

thanks allot ,i have it working on my system very happy with it

[@AussieRCPlayground]

Very cool! Great video, man. Really nice tutorial. Well done!

[@BlindDude]

Thanks man.. Had to skip to the meat and potatoes but I got it... Awesome info! +1

[@joshmcgrath7883]

hay thanks for the tips going to try it out on my jeep .like your jeep looks good

[@markgueren9633]

awesome!! this answered the questions Ive had!! keep up the good work!!

[@Moyersteven1]

Thank You!

[@devolutionrc8016]

Great video. Thank you for sharing.

[@madermaxx]

nice job,well done :0)

[@lordtickles1478]

Like the truck. But gum smacking is annoying

[@Moyersteven1]

Scott Johnson Haha, yea I learned my lesson on this one, im sorry!

[@styalrc]

hey Mr. Aquatic, can you still use your throttle an steering while winching at the sametime?

[@phantomscaler]

yup

[@90eurovw]

I did this and it didn't work... I wanted to test before I installed I did use 2 different batteries(one for truck other for winch power) but I couldn't get the winch to work with remote but it worked with the button on the winch controller any ideas??? please and thank you!

[@gtarbmx]

is there a way to wire it if i don't have a winch controller but have a 3ch radio system?

[@samjackson9747]

good shit got a FS GR3C and this works on it as well. thanks

[@stormsy4078]

Great build check my uhf pistol grip out

[@7kylehockey]

Can you a video showing how to install a winch on flysky it4

[@chicopepito9818]

Hi! This really works with my winch but my tires wont spin freely. Do you know how to solve this problem? I would really appreciate it if you do. Thanks bro.

[@Moyersteven1]

It sounds like you may need to calibrate the throttle/brake on the radio.

[@chicopepito9818]

Do you know how to calibrate it bro?

[@Moyersteven1]

@@chicopepito9818 Depending on your ESC, you have to put the ESC in program mode, give full throttle, full brake and you should be good to go. Look up your ESC and search for calibration.

[@chicopepito9818]

RC Logic thanks. Unfortunately i don't know how to calibrate my esc. I need to do research. Thanks.

[@sammyfuentes2561]

I just got one of that remote control flysky gt3b I just want to know if I can use it with any other cars iam new on this thing of hobby RC I just got me a us truck and I want to buy me a car bout I want to know if I can use the remote control that I got with others please help me out. Thanks

[@Moyersteven1]

Sammy Fuentes Yea, you can use it with I believe 10 cars

[@MrIgorr32]

Hi buddy mine won’t bring it out for some reason do you think I’m doing something wrong

[@jsrussell8]

This did not work for me. It will let the winch out and in by pressing the channel 3 button, but the trim function. Any help? It's a rc4wd warn winch with controller.

[@phantomscaler]

this is how my gt3b is set up :D

[@tonyg8031]

hey will this work with a servo winch and still have throttle and steering?

[@Moyersteven1]

Yes it will, just make sure you have the settings right.

[@cwachtl]

Did you plug the winch directly in the rx?

[@Moyersteven1]

cwachtl No, I use a winch controller. With a servo winch (10X Better) I plug straight into the RX.

[@CarminesRCTipsandTricks]

Sorry to sound like a noob.... but is there a trick to getting the 3rd channel to do ANYTHING on my gt2b 3-channel?

[@logansportpilotrp8174]

yeah just do what he says in the video.

[@fords4life914]

I'm trying to get my headlights to work on that switch

[@mxroydr.3007]

is this will work on fs gt3b?

[@rickyhits6547]

That is badass

[@squidinkRC]

how much is the winch and were can i buy it online:)

[@daltonjberkley44]

Amazon, 3 racing automatic wintch

[@sc10rs]

awesome mate :-)

[@markgueren9633]

Hmm.so as soon I I switch off channel 3 its starts to pull in??? Ideas?

[@Moyersteven1]

That's Awkward, and you have the settings correct?

[@markgueren9633]

Yeah...so I put the left end point to 0 and it stopped it....weird works Awsome now...THANKS again!!

[@daltonjberkley44]

thank you so much i loved the video but the gum chewing was annoying keep making grate videos!!!!!!!!!!!

[@daltonjberkley44]

great*

[@kuhtinski]

does not work with my FlySky GT3C... CH3 does not let the rope out

[@jaydenross5403]

can it work on a fs gt3b

[@mxroydr.3007]

is your gt3b is stock?what is your settings?

[@kimdra9321]

WOOOW BRO VERY NICE;)

[@brholm3099]

I have all the settings right and it will only go out.

[@GarrettRC5thscaler]

WHATS THE INTRO MUSIC PLEASE? thanks

[@Moyersteven1]

Its Royalty Free Music, its been a while since this and im now using a different intro, I no longer have the info for this intro. Im sorry.

[@reaper-11s]

Funny I have the same guy

[@PMR5571]

hit me with some love

[@americanrcproductions4528]

don't chew gum while videoing.