The Easiest Woodworking Project You'll Sell

[@HamiltonDilbeck]

🔥CNC WITH ME: www.cncwithme.com/

[@SouthpawWoodwork]

Happy to see my name on the list 😊

[@derekpeterson5123]

You're awesome, thanks for sharing your time and talent with everyone!

[@prestoncox]

This would make a sweet dice tower with a couple of mods!

[@DavidNelson-ss9cb]

Nice work! I like your videos and projects. You keep it human and at my level.

[@Cadence_MFG]

Excellent project, Hamilton! Nice work.

[@AlienLeader4]

Awesome video. I wish I had my CNC already still gathering the funds and making room for it in the shop. Keep up the amazing work. 👽

[@builtbybittle]

Sounds like folks need to hear the mantra: "If you're not first, then make it better or different".

[@chrispelletier3661]

I totally love this! Time to make one!!!!

[@Hinkleshop]

Great video Hamilton Hey, here’s just a thought when using the Vee bit if you left slightly more than just an onion peel, and didn’t cut completely loose. I would be curious to see if you could fold them and lose the seam line on the outside of the hexagon just a thought keep up the great work brother.

[@christopherlamoureux8617]

I've seen people do that, and add a little spritz of water to help keep it from cracking.

[@Hinkleshop]

@@christopherlamoureux8617 I was thinking about the water too after I commented

[@RoseKindred]

Thank you. I really liked this version and the way you walked through it. I have seen a 4-sided one and it just seemed like it would wobble over in use. The Hex looked so much better.

[@Agriking]

The man always makes it entertaining.

[@jarodmorris4408]

I know there's an entire life that doesn't get on video, but you seem like one of the real-est people on KZbin. real-est is now a word.

[@Download-Woodworking-Plans]

Loved this. Thanks for sharing.

[@RBallarddesigns]

Great project Hamilton!

[@LittleShadowWoodcraft]

Great project Hamilton! Totally think this would be a great sell! And you could totally customize this if you wanted by v carving some sayings in the other side if a customer wants. And I caught your “Oops” when zeroing the first time… something I have NEVER done… cough cough 😅

[@aaronblackford981]

Awesome concept as always. I have had interesting issues with rare earth magnets on a knife river epoxy board. It didn’t matter how many magnets I put in there, the knife wouldn’t hold unless handle was up. This concept seems much more within my area plus that was a huge bowl for spoons and such handles. Loved it. If anyone has some sort of approach on my project to help. Thank you

[@christopherlamoureux8617]

You were great on Another woodshop podcast!

[@HamiltonDilbeck]

Thanks! It was great hanging out with them!

[@MASI_forging]

Excellent project 🥰🥰

[@sidewinderdrums]

great project. cutting slats (staves) at an angle, and then making a cylinder. now the next step is to make a drum...

[@rickpouley7561]

Very nice!

[@Waciglass]

Yes! A lazy susan, you had one all the time. 😅 powered turntable next 😉

[@sickkid129]

do you just leave the top of it open? looks really good and I might have to have a hand at making one... or twenty haha.

[@WanderingStar-fq4cn]

The link to the magnets does not work. Might help to put the dimensions in also xx by xx

[@jarodmorris4408]

The 6" Lazy Susan is unavailable at the link you provided. Any ideas of others that would be good?

[@MCTheTrash]

How does it look from the top? I don't think it's gonna look great right now... With all those holes that go nowhere?

[@GeekRedux]

5:31 That's not just one, though. That's the whole stack of magnets and each one's magnetic field combines with the fields of the other magnets it's stacked with. You might still just need one, but this demonstration doesn't support that at all. You'll need to test. I also suspect you'll get a stronger effect if the two outside magnets are placed with their fields pointing the same direction and the middle one with its in the opposite direction: N S N or S N S, then alternate each side of the holder. You want magnetic fields reinforcing each other, not working against each other. So: NSN SNS NSN ...

[@theom8741]

No vacuum table?

[@christopherlamoureux8617]

To help hide the seams while using woodglue, if you use a waterbased stain, you can add stain to pva glue to darken it. With a little testing you can get an almost perfect match.

[@charliepickering3141]

Hey! That's my face in the video! 😂

[@adamjensen8112]

I would have done two rows of magents so the knife is less likely to pivot. one pivot point per knife seems dangerous

[@dbreezy1201]

How much do you sell these for?

[@mrsecretyt9273]

projext is nice, but bro. u are showing some projects where you need CNC machines...

[@MattMG84]

Am I the only one who calls these Crazy Susan's instead of Lazy Susan's?

[@hansdegroot8549]

Nice video. Thanks for sharing. I don't agree with the title though. And the title also doesn't cover the content of the video.