The whole job took 10 minutes. I’m stunned. Genius video
@shacharpinto5 жыл бұрын
Shout out to this guy it was an amazing tutorial
@thebasementbikeshop23365 жыл бұрын
Thanks!
@thatf224 жыл бұрын
finally some good content
@livinlifeoutdoors43303 жыл бұрын
Best video, totally recommend it he got straight to the point thumbnail was great and I was able to get the job done in five minutes
@hectorjar3 жыл бұрын
Thanks mate! Great video and worked flawless! After looking at lots of rubbish videos, yours did the trick. Good job!
@JLongNC2 жыл бұрын
Thanks for this tip. I tried the hairspray and it worked like a charm!
@bella01674 жыл бұрын
Thanks man knew about the hairspray needed to know about getting them off.very helpfull.👍
@SonnyGTA4 жыл бұрын
I wish I watched this first. I started to chop up my grips with a wrench! D’OH!!!!
@sjwzr3 жыл бұрын
I have same problem but hopefully this helps
@Eazytarget5 жыл бұрын
Genius this works like a charm
@thebasementbikeshop23365 жыл бұрын
I'm glad I could help!
@sglenn62 жыл бұрын
Do you also use the hair spray when installing bolt on grips or is it no needed? Thanks
@timemoney2775 Жыл бұрын
Thanks. I just did it but the muscle on my forearm muscle has double.
@bleatingrascal35164 жыл бұрын
Amazing tutorial 10/10
@thebasementbikeshop23364 жыл бұрын
Thank You!
@mark-one6511 Жыл бұрын
Very Amazing Tutorial 100/10😀
@thebasementbikeshop2336 Жыл бұрын
Thank you! I'm glad I could help!
@alexlongoria14764 жыл бұрын
A tiny drop of dish soap or probably any soap is way easier and to put your grips back on you just put your grip on then tap it lightly with your hand each tap pushes it on further this works multiple times
@smerdopsis60922 ай бұрын
Incredible tip, I didn't have hair spray, I immediately tested the dish soap and it took the same amount of time to read your comment as getting the grip off. Less than a minute. A screwdriver helps as well to get in between the grip to drip soap into.
@alexlongoria14762 ай бұрын
Your welcome glad that my tip helped
@r.t.79253 жыл бұрын
Genius ! I used 3mm long Allen key instead.
@snoopjunk60353 жыл бұрын
is there something else u can use then hairspray?
@rideordiefl82 Жыл бұрын
worked perfectly thanks
@larshbn3 жыл бұрын
Lol i bought mx grips hope they’ll fit bought them bc they looked fire
@pristinx68295 жыл бұрын
Guys instead of water just use windex and slips right off
@SonnyGTA4 жыл бұрын
Rage_Blaze that’s what SHE said.
@owenworthy2514 жыл бұрын
Thanks man this really helped
@lukeg80095 жыл бұрын
Thank fucking God this video exists
@mrnorm42973 жыл бұрын
What is the difference between WD 40 and hair spray for installing the grip?
@thebasementbikeshop23363 жыл бұрын
I was taught to use hairspray by an old "yoda" of the bicycle mechanic trade. He said of all the things he has tried, hairspray dried fast and held the best, even in a little rain.
@mrnorm42973 жыл бұрын
@@thebasementbikeshop2336 oh ok thanks.
@lucasharraca36413 жыл бұрын
can i use WD 40 instead
@cbart2k1984 жыл бұрын
I have mushroom grips which are already capped at the end. Rip. Great explanation though!!
@gakbrenti4 жыл бұрын
thank you. now i'm gonna try.
@kevinreiser39762 жыл бұрын
Awesome 💪🏻
@trey48263 жыл бұрын
This helped a lot thankq
@moy14ss335 жыл бұрын
Is there onther way to not break the bar ends
@thebasementbikeshop23365 жыл бұрын
I've thought about shooting some lubricant or water into it and turning it like I do with the grips. If there is a hole in your barends, you could use an air compressor to shoot the barends out like a champagne cork by putting the air nozzle in one side and plugging up the other side. I hope that helps.
@moy14ss335 жыл бұрын
The Basement Bike Shop I have odi grips
@thebasementbikeshop23365 жыл бұрын
@@moy14ss33 Is there a screw in the end of your bar end?
@moy14ss335 жыл бұрын
The Basement Bike Shop no
@tommyleesoren5803 жыл бұрын
Definitely worked
@bscentral55065 жыл бұрын
Thanks so much, helped me with bmx
@thebasementbikeshop23365 жыл бұрын
You're welcome. Glad I could help.
@MalditoSeasEstadoDelsrael2 жыл бұрын
you can take your bike to the shower and spray hot water straight into the grip and itll expand temporarily and it becomes very easy to pull out.
@mccririck014 жыл бұрын
Brilliant, thanks!
@Bigrig_trmc4 жыл бұрын
Thank u so much!!🤘🤘🤘❤
@thebasementbikeshop23364 жыл бұрын
You're welcome. Glad I could help
@AbideinChristFully4 жыл бұрын
Put away the heat gun. I struggled more than you, but got it done.
@caliber-do1cp6 жыл бұрын
nice goin very smart
@finnisgay50564 жыл бұрын
Yt says you have 6.24 million subs how? Or is this a mistake? Since you have only have around 258000 views all together. How!!?
@thebasementbikeshop23364 жыл бұрын
Lol. That's a mistake. Not even 2k yet.
@finnisgay50564 жыл бұрын
The Basement Bike Shop oooh I was actually thinking how did it happen and you must be amazing getting over 6 million in two years well good luck with the channel I’ll sub to help you out.
@thebasementbikeshop23364 жыл бұрын
@@finnisgay5056 Yeah i my end it doesn't say that. Weird. thanks for the sub
@jonnyguenther63125 жыл бұрын
Rubbing alcohol also works
@jordde51333 жыл бұрын
Legend
@jameslenihan2874 жыл бұрын
Thanks 🙏
@SuperImmunologist3 жыл бұрын
Why can’t we just use we40 once the straw is in
@thebasementbikeshop23363 жыл бұрын
I did once. You just have to clean out the grips really good or they won't stick because if the wd40 residue.
@SuperImmunologist3 жыл бұрын
@@thebasementbikeshop2336 I used the 2 in one. The water didn’t work for me or I just didn’t have the patience.
@yaboi_jay27354 жыл бұрын
This dude really said 'When i didnt have water'
@thebasementbikeshop23364 жыл бұрын
Maybe I live in a desert...that has hairspray. Don't hate. lol
@yaboi_jay27354 жыл бұрын
@@thebasementbikeshop2336 Dont worry dude this helped so much lol just switched them out and was ridding all around town. then my chain popped off... any ideas? it keeps getting hella loose and i think its because im back pedaling but idk.
@thebasementbikeshop23364 жыл бұрын
@@yaboi_jay2735 how's your sprocket? Back pedaling shouldn't matter. I do it like its my fidget spinner. Sometimes if your sprocket is bent when it hits the tight spot, it stretches your chain or pulls your wheel in. Do you have tensioners?
@yaboi_jay27354 жыл бұрын
@@thebasementbikeshop2336 nah I don't have tensioners but I'm thinking if I put like a a metal rod or something it'll hold the bike nuts back so it won't keep sliding foward
@kyleschwartz.4 жыл бұрын
How can I make it dry quicker ?
@thebasementbikeshop23364 жыл бұрын
If you have an air compressor you can blow air under them