Is it possible to build cantilevered rooms out of this material without providing beams, particularly for a short cantilevered floor overhanged by 30 cm?
@EMMEDUEabs Жыл бұрын
Usually there is no problem creating cantilevers of that kind, but obviously you need to do the appropriate checks with structural calculations. In any case, if you email us at info@mdue.it, we can send you example pictures!!!
@nothingofmatters2 күн бұрын
What's the tickness of concrete above the roof , can i do it like walls ?
@dongarybacuno63154 ай бұрын
Since mortar plaster is used, is it prone to develop hairline cracks, particularly due to moderate seismic activity or temperature fluctuations? If so, does this condition compromise the structural integrity, or just a cosmetic issue of the plaster?
@EMMEDUEabs4 ай бұрын
Cracks may occasionally appear in the plaster, but they are purely aesthetic and do not affect the structural integrity. If you need any further information, feel free to contact us at info@mdue.it. Thank you!
@robertbutler800422 күн бұрын
@@EMMEDUEabs who in their right mind wants any cracks?
@JoaoFaria-lg3ii7 ай бұрын
What is the name of the equipment used at minute 3:46 to project onto the wall? Thank you.
@EMMEDUEabs7 ай бұрын
It's a mortar spayer!
@Summersault6662 жыл бұрын
What is the approximate cost per square meter in USA?
@EMMEDUEabs Жыл бұрын
You can contact directly our partner in USA: Gulf Concrete TECHNOLOGY INC 4739 West Oreck Road, Long Beach, MS 39560 ----------------------------------------- www.gctm2.com/ sales@gctm2.com Toll free - 866-936-6416 Thank you!
@kezhao77265 жыл бұрын
Impressive! But you guys don't need columns and beams?
@EMMEDUEabs5 жыл бұрын
Hello Mr. Ke Zhao, thank you for your interest! Buildings realized with the Emmedue System don't require traditional bearing elements, as certified by: - ETA certification, for the European Union; - different tests carried out in laboratories all over the world (including seismic tests); - and hundreds of thousands of buildings realized with the Emmedue System without traditional bearing elements, such as beams and columns. For any other inquiry, we are at your disposal at info@mdue.it
@boracay124 жыл бұрын
@@EMMEDUEabs what thickness foam /density and wire diameter / mesh is needed for a single or 2 story house to be built with out columns and beams and withstand typhoon force winds ? I have been told here in Philippines that columns are needed but I suspect their panels are only 2 inch of foam.
@EMMEDUEabs4 жыл бұрын
@@boracay12 good morning. I guess we got your request this morning on our website and I already forwarded it to the person in charge who will get back as soon as possible with all the technical information needed. If that was not you, please write us at info@mdue.it so that we can forward your request to the dedicated department. Have a nice day!
@boracay124 жыл бұрын
@@EMMEDUEabs hello ,yes that was me ,thank you for your response . I'm looking forward to the information. . there is conflicting opinions .and I think your company is qualified to provide to give the correct requirements . Thanks again ,and have a good day .
@imtrash90133 жыл бұрын
This is good material and innovation, can I screw ang hung for example TV or split type AC or big mirror on the wall using this type of panel?
@EMMEDUEabs3 жыл бұрын
Yes, of course. For more information, please write to info@mdue.it :)
@imtrash90133 жыл бұрын
@@EMMEDUEabs nice
@robertbutler800422 күн бұрын
@imtrash9013 what a stupid question when any reasonable-thinking person would know of cause you can hang a tv of the walls.
@dominic6055 Жыл бұрын
No doubts about the structural advantages, but EPS with layers of concrete is a big humidity trap. Are you relying from buildings using AC 100% all of the time?
@EMMEDUEabs11 ай бұрын
Good morning Dominic! EPS is water vapor-permeable, making it breathable, yet waterproof. The permeability to water vapor ensures that mold does not develop inside buildings and environments insulated with EPS. Additionally, please note that the thickness of the panels is variable and is determined only after a thorough thermo-hygrometric assessment, which allows us to assess the potential formation of interstitial condensation. For any further information, feel free to contact us at info@mdue.it. Have a nice day! :)
@younghillionaire5 ай бұрын
Is this available in the GCC?
@EMMEDUEabs5 ай бұрын
We have 4 production plants in Saudi Arabia. You can contact this one: ALIAN INDUSTRY CO. in Riyadh alianind.com/ar/ Do not hesitate to contact us for any further information.
@noureddineramzey79554 жыл бұрын
Hi Please how many floors can we build with this system ? Would you like give us an example of project that is built with tbis system Thank you
@amyboilermanufacturer84634 жыл бұрын
Please contact whatsapp number 008613365455439, I will provide you with support, the email is amysalemanager@abcn.group
@emonkhan36493 жыл бұрын
What is the finishing raw materials only cement, sand and conceit or anything else. what size conceit use
@EMMEDUEabs3 жыл бұрын
Hello Emon! The finishing raw material is a mix of cement, sand, water and additives. The quantities depends on the type of materials you have on site. The max size of sand is 6 mm. For any further question, please write us to info@mdue.it. Thank you!
@abidaliqasim12092 жыл бұрын
هل يمكن عمل بلكونات أو أجزاء بارزة cantlever بهذا النظام عن السقوف .
@EMMEDUEabs2 жыл бұрын
Please, be so kind to write in English. If you need information, you can write to info@mdue.it. Thank you!
@barbara397753 жыл бұрын
Hi, whats the name of the electric rebar cliper? thats seems very nice!! Thanks
@EMMEDUEabs3 жыл бұрын
Hi Cachinhos da lulu , What do you mean by "electric rebar cliper"?
@yahm49963 жыл бұрын
The equipment with hot air
@stevenmonrad3 жыл бұрын
Ryobi= makes a battery powered bolt cutter - max diam 3/8inch perhaps. RYOBI 18-Volt ONE+ Cordless Bolt Cutters
@dezar72455 жыл бұрын
Is this really durable? Built to last? Earthquake and fire resistant?
@EMMEDUEabs5 жыл бұрын
Good morning Ms. Rodeza, yes, as for the resistance to earth-quakes, laboratory tests carried out on full-scale prototype houses have shown that the Emmedue structures withstand, without any damage, earthquakes of seismic accelerations superior than those required by current seismic safety regulations. While regarding the resistance to fire, Emmedue panels are made of self-extinguishing expanded polystyrene, which is also perfectly confined by layers of reinforced concrete that cover the sides of the panel and prevent combustion. Its fire resistance has been verified according to international standards through tests conducted in different laboratories. Moreover, Emmedue panels have proved a great resistance to blast and cyclones. Please, check this link: www.mdue.it/en/advantages.php or more enquiries, we are at your disposal!
@KitCayman4 жыл бұрын
@@EMMEDUEabs I see the Cyclone resistance is only 106.20 km/h which translates to 66 mph which is not even Hurricane strength. Is that honestly the highest tested speed?
@EMMEDUEabs4 жыл бұрын
Good morning Deza, of course our building system has been subjected to resistance tests of all kinds (load, fire, hurricanes, earthquakes, etc ...) by accredited bodies around the world. If you are interested in learning more, please write to info@mdue.it and we will send you the documentation of your interest. Thank you :)
@EMMEDUEabs4 жыл бұрын
@@KitCayman Good Morning Kevin, for technical details I invite you to contact us by email to info@mdue.it n order to be able to send you the technical documentation of your interest, Thanks :)
@KitCayman4 жыл бұрын
@@EMMEDUEabs sent
@lawrencethiongo12644 жыл бұрын
Hi Am interested in nairobi how can I get you please
@EMMEDUEabs4 жыл бұрын
Good morning Lawrence, please contact us at info@mdue.it so that we can give you all the contact information you need. Have a nice day!
Is the 2nd story just attached to the first story's panels using the metal clips or are additional rebars laid in the 2nd story to support the 2nd story walls?
@EMMEDUEabs3 жыл бұрын
Hello Adam, in case of a multi-storey buildings, the walls of two consecutive levels are connected to each other by reinforcing bars with a maximum diameter of 8 mm. For any further question, please contact us by email at info@mdue.it!Thank you!
@ashokrana86792 жыл бұрын
Is available in Delhi also
@EMMEDUEabs2 жыл бұрын
Not at the moment, but we can evaluate to send the panels from the plant in Philippines. Please, write us to info@mdue.it. Thank you!
@robertbutler800422 күн бұрын
I have watched a few of these videos and not one of the showed any plumbing or electrical work.
@EMMEDUEabs22 күн бұрын
kzbin.info/www/bejne/bpvYp3esiMqMgpo
@MsEmpiree3 жыл бұрын
what's the maximum area that one roof panel can cover ?
@EMMEDUEabs3 жыл бұрын
Hello Ahmed! With the Emmedue system it is possible to produce panels of different lenghts and thicknesses. In the roof, in terms of resistance, it will depend on the stresses it has to bear, that is, loads (as wind, snow, etc.) and the spans (distance between supports). Surface area is a relative measure that depends on these factors. For any further question do not hesitate to contact us at info@mdue.it. Thank you!
@danielbarrera19093 жыл бұрын
Hello I would like to know, how is it the soundproof??
@epsseriesmachines69653 жыл бұрын
Its sound insulation effect is not bad
@EMMEDUEabs3 жыл бұрын
Hello Daniel,Experimental tests run on the panels have provided optimal results, showing the suitability of the panels even in the most severe conditions, in accordance with the current technical laws. For further information, please contact us at info@mdue.it. Thank you! :)
@sinaiphotostudio48103 жыл бұрын
In Nepal, is it available?
@EMMEDUEabs3 жыл бұрын
Unfortunately not. The plants closest to Nepal are in Indonesia, Philippines and Malaysia. For further information, do not hesitate to contact us at info@mdue.it. Thank you!
@ricardoclaudius90593 жыл бұрын
Where are you located ?
@EMMEDUEabs3 жыл бұрын
Emmedue is located in Italy, but our building system can be produced in many countries. Which geographic area are you interested in? :)
@sgltc31 Жыл бұрын
Hello, I want to do it in Turkey. Can you provide contact information?
@EMMEDUEabs Жыл бұрын
In Turkey we don't have a production plant. The nearest is in Albania and you can contact them here: structeco.eu/contact/ Thank you!
@tiguidankecisse34104 жыл бұрын
Is this available in Guinea Conakry
@EMMEDUEabs4 жыл бұрын
Good morning Tiguidanke, sorry for the dalay of my answer. We don't have any plant in Guinea, actually. The plants nearest your country are in Capo Verde and Algeria. If you need more information, please contact us to info@mdue.it. Thsnk you! :)
@drzsaleh3 жыл бұрын
What is the density of the eps used in the panel ?
@EMMEDUEabs3 жыл бұрын
Usually it ranges from 15 to 25 kg / m3 based on structural needs. For more information do not hesitate to contact us at info@mdue.it. Thank you! :)
@caparn1004 жыл бұрын
How does the build and materials cost of a house made with this compare to a traditional cinder block construction?
@EMMEDUEabs4 жыл бұрын
Good morning and thank you for your interest. A building realized with the Emmedue System costs around 30% less than one carried out with traditional building system. Of course, to be more precise we'd need to know the raw materiala' costs in each country and other details! Have a nice day!
@amyboilermanufacturer84634 жыл бұрын
How does the build and materials cost of a house made with this compare to a traditional cinder block construction?
@judithbacit15184 жыл бұрын
Is this available in Philippines
@EMMEDUEabs4 жыл бұрын
Dear Judith, yes it is. Can you write us by email at info@mdue.it? We will send you back all the contact adress and info. Thank you :)
@judithbacit15184 жыл бұрын
Loft house like this one, not really a one or 2-storey.. pin.it/5S5WhOK Would it still need post and beams when using these panels?
@EMMEDUEabs4 жыл бұрын
@@judithbacit1518 We can usually safely say that you would not need any additional structures, just our panels. In our website you can see this type of loft made in Spain, where the columns that are seen are only architectural and not structural. Have a look here: www.mdue.it/it/gallery.php?s=88&a=&t=&p=
@epsseriesmachines69653 жыл бұрын
hello friend, My whatsapp is +0086 15336457919, May I know yours? I want to send machine running video to you.
@bruchmariano11665 жыл бұрын
What do you call that plier (with the yellow handle) that they use for joining panels?
@EMMEDUEabs5 жыл бұрын
Good morning Mariano, that's a staple gun. Have a nice day!
@puntabachata2 жыл бұрын
Hog ring pliers.
@ronelpalmer15075 жыл бұрын
Is there an agency in South Africa
@EMMEDUEabs5 жыл бұрын
Good morning Mr. Palmer, please send us an e-mail at info@mdue.it so that we can give you all the information about Emmedue Panels manufacturers in your area. Have a nice day!
Dear Lule, It depends on the cost of raw materials at the place of production. Where are you from?
@epsseriesmachines69653 жыл бұрын
We are a Chinese manufacturer and have our own factory. If you are interested, you can add my whatsapp, +008615336457919, I will send you detailed pictures and video introduction
@sunilbachhav16443 жыл бұрын
Is it fire resistance ? How to compare with conventional building ? Maximum loading on floor ?
@EMMEDUEabs3 жыл бұрын
Good morning Sunil! The Emmedue building system has passed the fire tests about which we can send you documentation and videos. If you send us an e-mail to info@mdue.it, it will be our pleasure to send you all the documentation relating to the comparison of our system with the traditional one and the maximum bearable weight. We wait for your news by email. :)
@nothingofmatters2 күн бұрын
Super nice
@adamclark30883 жыл бұрын
Is it possible to install spiral staircases when using m2 panels? -The staircase wouldn't have to be made of M2 panels.
@EMMEDUEabs3 жыл бұрын
Sure, it is. Can you write me your email address so I can send you some photos of exemples of stairs realized with our panels or not, but anyway installed in houses built with our system?
@adamclark30883 жыл бұрын
@@EMMEDUEabs yes thank you, here is my email. adam@clarkclub.com
@EMMEDUEabs3 жыл бұрын
@@adamclark3088 you'll be contacted by email from our technician. Thank you!
@ibrahimndungu97284 жыл бұрын
How much per panel
@EMMEDUEabs4 жыл бұрын
Dear Mr. Ndungu, actually we don't produce panels, but we sell the technology to produce the Emmedue panels instead. If you are interested in our technology, please contact us at info@mdue.it Have a nice day!
Seems like you're avoiding questions on can this technology be used to build multi storey buildings 😕
@EMMEDUEabs4 жыл бұрын
Good afternoon Moses, we are answering to all questions, actually. By the way, of course we can build multi storey buildings too. If you need more details, please contact us by email at info@mdue.it and we will be glad to send you photos of some multistorey buildings we realized all over the world. Thank you! :)
@chinhvannguyen16854 жыл бұрын
Hi, technically is difficult with nomor workers, i am built 3d panel house, special buld 3 floor without concrete framing, tks
@EMMEDUEabs4 жыл бұрын
Hi Chinh! I'm not sure I understand your comment. In any case, one of the characteristics of our building system is the ease of assembly on site. For further information, do not hesitate to contact us at info@mdue.it. Thank you :)
How do I get the materials?should I present my plan first?
@EMMEDUEabs3 жыл бұрын
Hello Gideon, first of all I need to know where you are writing from, in order to understand if there is a production plant in the country of your interest. From there, I can put you in contact with the customer in the area in question to which you can then make all your requests and ask for all the information you need.
@epsseriesmachines69653 жыл бұрын
My whatsapp is +0086 15336457919, May I know yours? I want to send machine running video to you.
@EMMEDUEabs3 жыл бұрын
@@epsseriesmachines6965 For any request or information you can contact us at info@mdue.it. But if you want to sell us machines, we are not interested, because we produce them. Thank you.
@MdRafi-wn6us3 жыл бұрын
Contractor rafi 9160938956
@netsifish51974 жыл бұрын
can i get in ethiopia?
@EMMEDUEabs4 жыл бұрын
Dear Mr. Fish, the nearest plants to Ethiopia are in Kenya and Eritrea. Please, contact us by email to info@mdue.it for more information. Thank you.
Buongiorno, qualcuno sa quanto costa al metro quadrato? Grazie
@EMMEDUEabs4 жыл бұрын
Buongiorno Signor Spinelli, le comunico che abbiamo inoltrato la sua richiesta al nostro agente di area in quanto ci è pervenuta in questi giorni per e-mail. Provvederemo a contattarla il prima possibile per rispondere alla sua richiesta. Le auguro una buona giornata!
@jamesdehoney62475 жыл бұрын
We need that here In the U.S.
@EMMEDUEabs5 жыл бұрын
Good morning James, you can contact us at info@mdue.it so that we can put you in touch with the Emmedue panels production plant in the USA. Have a great day!
@WANDERER00705 жыл бұрын
This is similar to www.tridipanel.com
@epsseriesmachines69653 жыл бұрын
My whatsapp is +0086 15336457919, May I know yours? I want to send machine running video to you.
@elhaikabdellah73764 жыл бұрын
Viva
@Paulus143 жыл бұрын
Who is the carrier organism ??? only with shotcrete is achieved. You just make coatings that do not create a carrier organism. Extremely dangerous construction to create cracks.
@EMMEDUEabs3 жыл бұрын
Good morning Mr Kalfagian, our panels have been subjected to numerous tests all over the world which have demonstrated their mechanical characteristics and their load bearing capacity. These tests are then linked to as many numerous certifications obtained. When you want, we are willing to talk to you about it in order to show you that the constructions made with our construction system are not dangerous. For more informations, please, contact us to info@mdue.it. Thank you!
@ningappagouda60043 жыл бұрын
Ph noumar
@bulletorozco67463 жыл бұрын
I dont.believe this is stronger than hollow block
@lol3ndir2 жыл бұрын
It is.
@dominic6055 Жыл бұрын
u have to understand stress points and also how different materials combined are more stronger than a pure concrete block, also that metal mesh is jointed with other panels and it makes the whole walls very strong
@flamingobrokernv39873 жыл бұрын
hello i send email to you for more information i am located in south america please let me know or reply on my email thank you
@EMMEDUEabs3 жыл бұрын
Hello, can you write me your email address to verify what has happened to your email? Thank you! :)
@flamingobrokernv39873 жыл бұрын
@@EMMEDUEabs i did send you email from vir_fernandes@hotmail.com
@EMMEDUEabs3 жыл бұрын
@@flamingobrokernv3987 Dear Mr Fernandes, I have checked and your email has already been forwarded to our area sales manager who will contact you as soon as possible. Thank you! :)