The Evo VIII Rebuild | Ep.25

[@ronaldoferko7943]

Polish the manifold and do an episode of how to polish a manifold the right way. Stoked to see this running and smoking the streets

[@BEARSTORM94]

plus itd look sick w the hardware

[@akileshhoolash2630]

A polish slash blue manifold bro.😍🔥

[@zion1493]

Polish the manifold doing black woudnlt stand out n look kinda doll

[@eddieellison7679]

Polish that bad boy! Can’t say it’s to much work after all you’ve done. Great work.

[@garrettwelsh7424]

Polish the exhaust manifold!!!

[@denyales4180]

man, the polished/blue manifold will look absolutely insane, you`ll need a lot of patience and I wish you this thing turn out as unique and cool as you want it to

[@01arron]

Who ever gets to own this after you is one lucky bugger. I love how your doing all the extra work to make it so much more appealing to look at

[@tradeMark182]

I love when the vibe of the vlog feels like Devin is saying peace out boys see you tomorrow , but then you get full more 12 min of video .. Dev you are great man 👌 12:40

[@MoonRammer]

i honestly kind of like the exhaust manifold the way it is

[@legacyr6920]

Definitely polished because once it blues it will go well with the dress up hardware you installed

[@ebxnxzxr015]

first Edit: I think you should polish manifold. I think it would make the entire engine bay look sick!

[@vasilyfilatenkov4051]

Look into swain coating. There are a few different options of swain coat but you can coat it with a polished finish and it also traps heat which will help keeping the bay cool.

[@CozmicKidz]

The black cylinder is an accumulator there’s a bladder inside that separates the nitrogen from the fluid in the ayc pump, what it does is help the pump with the flow of fluid, supplies extra power to the pump in case of a leak. But mostly it’s to help regulate the system pressure wise

[@luvtomoko]

Polished manifold will look sick!!! Titanium look will pop out when you pen the hood.

[@corytryon6374]

Definitely polish that exhaust manifold!! Once the heat sets in the bluing will look 🔥🔥🔥 with all the blue titanium hardware!!! Love your videos, Keep up the grind, it's appreciated 💯👊🏻🤘🏻

[@geno7404]

You've spent so much time making that bay perfect. You have to polish the manifold and let it blue. Maybe once it gets to a certain level of blue that you like, use some clear cerakote on it to lock in the look and keep the road grime and stuff off of the raw finish.

[@lukeslater3469]

Wow Devin that engine bay is REALLY starting to come together. LOOKS 👌🏻.

[@speedychris8562]

Polished! as everything else is looking spot on 😎

[@rasielrodriguez3489]

Truly enjoy your process to this madness . My favorite car KZbin channel at the moment . Keep it up

[@sgtjohn9343]

Make it stand out bro that’s what this car is built for 🔥🔥🔥🙌 go blue

[@Grooove_e]

The starter doesn't require a fuse because the starter motor needs a whole lot of current to turn the flywheel with that little pinion gear. The starter solenoid eliminates any continous contact between the starter motor and the battery. The solenoid contains a magnet that activates the solenoid upon turning the ignition switch. Not only does the solenoid complete the circuit to the starter motor, but it also extends the pinion gear using a fork, similar to a clutch fork in a transmission, to extend the pinion gear when the magnetic solenoid activates and spins the motor. If you want to know how big of a fuse you would need to protect your starter, just estimate it to be about 20amps higher that your battery's max cranking amps rating and that's a fuse that would not fit under the hood. Sorry for the long comment! Just saw an opportunity to share my knowledge Edit: the fuse would fit I guess, but it would be absolutely huge and very unnecessary unless you're worried the car will be randomly struck by lighting or a falling electric power line lolz

[@alexandraejorgevideira97]

How are you guys, brother im just stucked at the phone,to see all process of rebuilt Evo 8...its amazing man.. Thank you To do those vídeos Brother. Big hugs for you all! I just love this channel!!! 🙏🏻💪🏻💪🏻💪🏻🖤🙌🏻🙌🏻🙌🏻

[@sayaadasgarally2646]

Polish the manifold When the manifold gets the blue burnt finished too it. It's gonna flow nice with the blue aluminum bolts💪💯

[@JoelMartinez-lo8by]

Oohhh man can’t wait for this build to be done, the finished product is going to be better than show quality

[@TheBUTTWARTOUCH]

we need a stinkeye build in the future!!!

[@Tony-tk4ht]

Has to be a hatch

[@maverick2242]

@@Tony-tk4ht Has to be a GC

[@alexandraejorgevideira97]

The manifold polished Brother, I think it's gonna geave a very beauty result!!

[@aCodingMonkey]

Polished manifold for sure would look so good with all the other blue accents

[@vinuyajohn719]

Just getting excited and excited about this build...hoping you have a titanium maniforld or maybe polish it, but dang this look so good at everyside. Color os to nice and match. Keep it up Man... I'm late because the upload time is the time for my rest. But everytime i open my youtube app this is the first channel i visit💪

[@TheBlakeob]

Opening shots of the FRS at the gas station looked SO good. Keep up great work man!

[@lukeslater3469]

I agree Polish the manifold. The burnt titanium look would LOOK SICK🤔😎👌🏻.

[@Lelux]

i think that the polished manifold with all the blue bolts in there will be a better option. And remember that hard work pays off Devin! Keep it up

[@AdrianBilladeau]

This EVO is looking amazing Devin! As far as the manifold goes, I vote for the polished look. I believe it would look the best. Besides, you have really put in the time thus far. FULL SEND BRO! Hahaha!

[@blakebusbee4627]

You and your brother are awesome ! I like watching him build dirtbikes also ! I honestly think i wouldn't trust anybody lol else with an engine rebuild because I ve seen your work and you have ALL the tools and everything is done just like it's supposed to Subaru or Mitsubishi should be paying you 200 grande a year bro !!!!!

[@jamesg576]

Route the fuel pressure reg vacuum line off the FPR back under it to run alongside the fuel line to the rail then across to the vac nipple on the manifold. Will get red of it looking solo out there.

[@zaakirahmadamide6809]

Polished manifold. Worth the work

[@sanham1045]

Your starter can pull a lot more than 120 amps. Don't fuse it. When you have two different types of metals touching I.E. steel screws in aluminum, it causes electrolysis which is corrosion. They get stuck. Use some anti-seize (I like the copper based) on the screws and never have a problem removing them again.

[@ryanbauer1482]

Polish the exhaust manifold, it’ll look so good for photos and the hard work will pay off. Even if it doesn’t stay like that you can always change it.

[@julienr28]

Awesome build man, I love the amount of details and efforts you put in it. Polished/blue manifold would look ten times better, but it will come at a cost. Black would still look good imho but it will lack of "depth". Cheers from France !

[@nodollarinc9948]

Starters lock up from time to time, Im pretty sure thats why there is no fuse. Build is coming along real nice!!

[@nickxri8205]

Polished exhaust broo!! Make it shine like the sun !!

[@ju_knee3691]

Polish the manifold Devin ! Also, you should lowkey paint the red cover of the fuse link thing black of that yellow.. by the way, you're the GOAT at rebuilding EVOs !!

[@ju_knee3691]

*or

[@eashan5022]

You don't need fuse because the signal wire to the starter is fused already so no point of running 2 fuses. Also on cold starts the starter sometimes draw very high amperage , as high as 200amps so there is a much higher chance of blowing a fuse.

[@rfhou]

You need a Frontline Fab dipstick handle! Looks like they have some in stock too.

[@nelsonvanputten9241]

Hey Devin what's up bro,hope all is well,I think you should polish it,it will be the finished touch to the project, and remember, hard work pays off🙂

[@Biggspeed]

Fuses are to protect the wiring and or the circuit the wire feeds. Most wires are fused in a vehicle because they run along grounded items or other live wires. Should the starter wire get in contact with a grounded item such as the engine block in most cases it will trip the main/master fuse. You can fuse the starter wire if you want but it’s really not needed. Some people put a breaker in line that can be disabled remotely as a starter interrupt for extra theft protection.

[@hannesnienaber3098]

I really appreciate the little zoom when you drove on the grass with the truck, surely that means something....can just imagine LOL

[@TVVortexGaming]

that gold finish on the manifold is amazing

[@raptorsininc124]

Black sounds cool but so does the blue , I cant decide cause the blue is gonna take more work. You choose!

[@danieltaylor4675]

With all the hard nice work you've done! All the detail, its a no brainer bro! POLISHED💯!

[@red_dragonracingsilvereclipes]

I wouldn't go black on the exhaust manifold but if i did go with that route i would look at cero coats heat trapping coating to use on it since its rated at 1400 degrees and it traps most of the heat in the manifold and helps the turbo spin up even more.

[@kms11235]

Polish it man, it would look insane! Well worth it after all that you've done in this build!

[@dragonshadow3707]

Blue bud wood look amazing

[@77felixthecat]

Blue burnt blue look , stm has intercooler piping and the manifold to match

[@tylerlaughlin972]

Polish it! It will be worth the work in the end. You have spent the time on everything else.

[@hithoomrs9078]

Polished and heat treated blue 💙👌🏼

[@Hacob_R]

Just watched the last 5 videos in a row. Your content is amazing.

[@thisgeneralmillennial100]

I know that cables may seem to look bad and or bring down the view of the car but maybe looking at it from geometric art form, would help with the wiring issues.

[@shadkowaleski1786]

Devin is the fyeahspec to the evo world

[@maverick021981]

Polish the manifold. I know it’s a lot of work but it would make a sick video and I would love to watch that. Great build man and I appreciate all the content and videos. Always sick to watch and see what your up too.

[@michaelboggs9886]

This channel is seriously my favorite no 🦲. Aye Devin polish than manifold bro it'll be clean AF if it were blued out bro...

[@Ghermy]

Wrap it with thermal exhaust wrap, will look cool and as you said, it has "to take your eye" will be the only thing looking different

[@whatidontknow10]

polished blued manifold. u can take have you sweet time doing it. u dont have a deadline to catch up with

[@MR_3vilution]

Love it. You have the Invincible colour scheme going on.

[@ryanhanlon5243]

The anodized look would look rad. Would finish off the bay well

[@gordyboy01]

You 100% spot on, Highly Polished exhausted manifold ftw 😉. Thou protests to much, Yeeaah it was the strut that gave you a black eye 🤥 #don't mess with the Bobbi Wallace 🤣

[@oMARKoPOOLOo]

There is Enough Going On, in the Bay ..... So, Polished to Impress .

[@kylemartin2213]

Bike fan of the r6 wish it got shown on the channel more

[@dbrad32]

I never liked an evo until this build. Great work

[@jameshuitt1420]

You going to wrap the fuseable link in black so you don't have the red stick out?

[@Chukers420]

Definitely polish the manifold, gotta make her pop and shine when you open the hood she's nearly the only bare metal surface in the engine bay show it off

[@dakotafire24]

I mean the manifold looks pretty good right now, it looks like it has a gold look to it.

[@krifenbark]

Polished manifold for sure!

[@Deckageskate666]

a FF turbo kit would make that already sick ass engine bay even better. with two external dump tubes coming out the hood, like a sheepey or a ets kit.

[@bzerob3400]

The polished look would be sick.

[@mcjags06]

Polish the manifold. Or clean it up as is and clear cerakote it. Looks dope that bronze looking color

[@_Machine631_]

I would for sure ceramic coat it. Id focus on the heat rather than how nice it is. Ceramic coat it black, and then do a high satin silver on the turbo.

[@BushidoPhoto]

I think you wouldn't fuse a starter is because it's on for a short time and not constant power. The ignition cuts the power when it's out of the start position and there may even be a fuse for the ignition?

[@PFLDIEGO]

Polished would be a nice look and a cool how to see

[@Sulimankhayyat]

if you have the headers bare it might help distribute heat

[@jimmywojtiw2134]

Polishing will do justice for the engine bay!!!!!

[@Miamisillest786]

KEEP THE YELLOW!!! Looks awesome

[@aaroncrearer7058]

Polish it! It would look soooooo cold🥶🥶

[@Bones4x4ltd]

Definitely polished manifold

[@kexohd6053]

Polished manifold, trust me... a lot of work needed but the end result is worth it!! totaly :D

[@nashedpotatoes7687]

Devin my guy, you already know it needs to be blued 😉

[@jordanedge52]

Heat coated matte black manifold would look sick

[@marcschoemaker7039]

Polished look will be killer 👌

[@SEPANDDANA]

Don’t cut corners!!! Polish that baby. It will be worth it

[@Mr.NotYourPALGuy]

Make a t-shirt with a pic of the engine bay when it's completed and put "My new bay" on the shirt.

[@JanJan-zg2ig]

BAE would be more attractive and humorous haha

[@saxomatt85]

Are you going to change the red fuse cover yellow, black or silver?? It sounds like a lot of work but polished and the blue manifold would look amazing

[@blancoforeever768]

Def polished manifold

[@mikef2492]

This is the build D need to polish the mani for sure man

[@ryansmith7880]

Polish the manifold will stand out better, as you said it would be the first thing everyone would look at.

[@konosbarlos]

both black and polished manifold will look good..but in my opinion the best looking will be the polished one

[@malcolmharper9686]

Hey Devin, leave it like that it looks beautifully....great build and work sorry about your eye.

[@paullannetts6062]

Polish it. Also get that oil dipstick head in blue too. Would look much better. 👍🏻

[@terraformingcats8175]

Also, change the strut tower bar to blue. I think that would look so amazing.

[@coltadams45]

Polished manifold for sure

[@cottydan3287]

Definitely Polish the manifold 🔥

[@WramTheVinylGuy]

get to polishing my man, because great effort reaps great rewards