How to use markings on the needle bar and clamp to align the needle bar properly to the hook. MUSIC: Dusty FIngers by JR Williams
Пікірлер: 33
@maria24004 жыл бұрын
I have a Singer 222 and it has it. I never noticed this either. Thanks Andy
@andytubesewing19534 жыл бұрын
Thank you very much, Maria. I'll pin your comment to the top for other 22 owners to see. Thanks for watching my channel.
@terrymcclean45824 жыл бұрын
Neat! Difficult jobs can be made easy if the manufacturer provides these kind of alignment marks. Thanks for passing it along.
@andytubesewing19534 жыл бұрын
Welcome. I'm going to be staring at every needle bar I ever work on now, haha.
@athertonca4 жыл бұрын
Thanks for another quality video. I appreciate every one that you make. I know it’s a lot of work. One day I will have viewed all 500+ Andy Tube videos. I am approaching 100, so I’ve got a lot of viewing in my future. That’s okay, it’s too Covid-y outside anyway.
@andytubesewing19534 жыл бұрын
"too covid-y outside"... 😊 True words, that. Maybe you should watch them at 1.5x speed? That's a lot of Andy Tube to watch 👀 Thank you for your continued support of my channel. Take care.
@meganmills65454 жыл бұрын
Oh - I really love that tip, once learned, never forgotten. And what a headache-saver! Thank you Andy - also to the two wonderful viewers who got in touch with you with that hint.
@andytubesewing19534 жыл бұрын
It's a brilliant setup and as Patty said below, why didn't SInger do that on all the models? Makes me want to clean another featherweight just to reinstall the needle bar, haha. Thanks very much, Megan. Take Care.
@crossstitchgal4 жыл бұрын
Thanks for passing on this info Andy. I have 4 of these machines and never noticed that either!
@andytubesewing19534 жыл бұрын
Kudos to the two viewers who shared it. I even hand polished that needle bar and did not see the mark. I rubbed some dirty grease into the mark so it would show up in the picture I took. It's a very shallow line. Thanks for watching.
@mygrommi4 жыл бұрын
Andy, thank you for this. I had never known about then lines either.
@andytubesewing19534 жыл бұрын
Welcome. It sure makes for an easy alignment.
@katemoore2980 Жыл бұрын
I just checked my 221k7(white featherweight), and there it is, clear as day! Thanks Andy for the great tip!
@andytubesewing1953 Жыл бұрын
You're welcome Kate. I wish all the machines had that
@lisaprincess624 жыл бұрын
Thanks Andy! I had no idea either. Now we all know. ☺️
@andytubesewing19534 жыл бұрын
Welcome, and thanks for watching my channel. ✨
@pattylevasseur26454 жыл бұрын
if they did it for the featherweight why wouldnt they do that for all their machines? il have to chk mine !!! thank you andy!!
@andytubesewing19534 жыл бұрын
That was my first question! I wish they had. Thanks for watching, Patty. Take care.
@ronalddevine95874 жыл бұрын
It's always a great privilege to be the first to like your videos. As always most informative. Any chance you could show bobbin case removal on 201-2? Timing would also be great. Many thanks kind sir 🙏 😊.
@andytubesewing19534 жыл бұрын
Thanks for the compliment. Sorry, no 201 machine in stock. It's a lot like the 99K, except there is a gear below the hook. andymanuals53@gmail.com ask for 201 adjusters manual. Thanks for watching my channel.
@GaryT19524 жыл бұрын
This for bobbin case: kzbin.info/www/bejne/iJLHoKOvic2XgLs This for timing: kzbin.info/www/bejne/rmfcdZSppa-th6M Also: vssmb.blogspot.com/2011/07/how-to-remove-201-bobbin-case.html
@danmorrissette48144 жыл бұрын
Right on! Kudos for this! ;-)
@andytubesewing19534 жыл бұрын
Thanks very much, Dan.
@janesmith59674 жыл бұрын
Great info! Thanks. Is there an easy way to align the presser foot bar? Mine was misaligned and it took me forever to align it.
@andytubesewing19534 жыл бұрын
No easy way that I know of other than aligning it with the open slots of the needle plate. It is a pain and if it is just a little offline the fabric pulls to the side. I know in the future I will be double-checking every presser and needle bar I work on, haha.
@barbaralee915 Жыл бұрын
My problem is, the needle hits the front of the hole in the throat plate. Thats the kind of alignment I was looking for.
@andytubesewing1953 Жыл бұрын
Here are the most common causes for a needle strike to the needle plate: The Needle Clamping Screw is loose. Incorrect seating of the needle in the Needle Clamp. A bent needle. A bent Needle Bar. Here is a video about removing, replacing, and adjusting the Needle Bar: kzbin.info/www/bejne/sIrCiYCkmpqMirM Here is my entire 26-video Playlist for Model 221: kzbin.info/aero/PLsCOZgzzaiKIA1OPw0k6QOSTE-wAUZ4kp Here is a link to a FREE downloadable copy of the Singer Service Manual for Model 221: www.manualslib.com/download/995890/Singer-221.html
@eric120620093 жыл бұрын
Hi Andy I'm a fan of your explanation. I have a single 15 and it was kept in my garage for many years so I removed all of it and cleaned it up and this needle bar hight I'm not sure with the needle bar bushing position I need some help with this
@andytubesewing19533 жыл бұрын
Hi, Philip. Yes, the settings can vary by model. There are a few variations of model 15. You can go here and download a refurbishing manual that includes a model 15 www.scribd.com/document/355688276/How-to-refurbish-sewing-machines-TFSR-Refurbishment-Guide This guide is what I used for "Cute" my model 99K. If you do not care to signup at the site, you can buy the guide from the charity that made it www.tfsr.org/product/sewing-machine/ The guide covers how to refurbish most of the parts of the machine, including the head (nose area)
@eric120620093 жыл бұрын
@@andytubesewing1953 wow that was awesome thanks Andy. Is there any other website for jaguar model.
@andytubesewing19533 жыл бұрын
@@eric12062009 Welcome. I know that a Japanese company named Marutzen made some Jaguar models for Sears & Roebuck, but I don't pay attention or follow other brands than Singer so I can't advise. Many years ago I realized several companies had made machines for Sears and that parts, manuals, and repair guides were hard to find so I just stuck with the Singer machines. You should be able to just Google "Jaguar sewing machine" and find info. There are also many vintage sewing machine groups online, so I'm told, and people there are knowledgeable and happy to share info. Good luck, Philip.