The fastest 1/5 RC car on the market up to 200 km/h

[@mr.behaving]

6 minutes of spinning wheels with no tires on, 20 seconds of assumedly actual footage.. *facepalm*

[@ZorroMS]

video was lame ! but nice model :-)

[@jefferyjackson7486]

Chris N I DEFINITELY AGREE!¡!!!!!!!

[@jamesb3092]

Click bait.... :(

[@weouthere707MENDO]

I'm glad I go to comments b4 watching video thanks for saving my time 💯👍🙏

[@alumaseuropeanaluminiumsys7398]

I was at Sanair on the weekend and got a chance to see the Tidnab car being tested, all I have to say is SWEET, keep up the great work, I want one of those

[@breilly2750]

"This is a silent RC car. Listen to it!" < *plays loud music during demonstration* > Really?

[@jnmwtkns]

Lol

[@PRIMCOR]

I think this will be the future for car motors. I have been following it on facebook for many months and I have seen it go in mud, snow, rain, water, rocks, sand, you name it they tested it . This is the future I would bet on it. I also saw this motor installed on a Go Cart , man if a little motor like that can make the go cart move at 40 kph with a 150 lbs person on it, I can see it making the 1/5 RC car fly.

[@SVTsupercharged]

Motors mounted on wheels will never last long for offroading. Rocks and dirt will completely destroy them.

[@sbyvsmoeldokodemokrat3145]

So clean it frequently dude, dont be lazy

[@Linktw0]

those puppies run like butter floating on warm oil

[@StinkyTheSquid2]

Never before has anyone needed a PR firm more than this

[@travisjones9005]

Those just look like rc plane motors. Like they are similar in all ways.And that jump when he plugged in the battery hahaha made me laugh so hard

[@ZorroMS]

I loved to build RC Models in the past but what i see here, just awesome :-)...don`t need expensive Nitro-Methane etc. Good work, keep going on !

[@DoRC]

I'd love to see the evolution of this. 4 wheel independent drive with full size torque vectoring, traction control, abs....the tech already exists. just need someone with enough money to put it all together.

[@micahulloa226]

Did you see that monster blowing that piece of paper around. Speechless!!!

[@moniquemc2864]

What was speechless is watching these small motors installed on a full size go cart , that thing went flying, Im a believer now.......................I don't think there is any other RC motors out there that can be installed on a go cart

[@צביקהלנצמן]

200km/h? NOT TRUE!! What about resistance? like the wheel size and weight, traction, weight of the all car? isnt it count?? please redo the test but take it on the road with speed camera and then show us 200km/h!!

[@Afiso]

exactly my thought

[@tinsleysmith2305]

+Afiso exactly what I was thinking

[@HanZie82]

Same here. I call bullshit on the 200KM/h part. For the rest nice idea but these motors are not powerful enough even when 2 of those in combo... Whit these on you should be VERY VERY happy if it reaches 100KM/h

[@D4RKSC4R3CR0W]

Also don't forget actual air resistance... all of these are factors that were "conveniently" not specified.

[@TheKasperlkopf]

for the dumb ones: perfect condition means theoretical potential. a perfect condidion cant be achieved. perfect condition would be no resistance in a vakuum.

[@Mr.Wednesday.]

Weird how this never caught on, like really wtf, all that free extra torque… the dynamic setting potential… pissin me off that we still aren’t here yet. Every big manufacturer should be offering this stock by now.

[@stevenb7681]

I have never seen anything so crazy, sign me up I want 4 of these motors for my Losi, I just watched the Go Cart video on line when will those crazy ass motors be on sale..................keep up the great work , your the best

[@HolmWrecker]

That'll add a lot of unsprung weight and kill suspension speed. Yes, suspension speed is a thing and very important in racing. Especially off-road. This tech is very cool though.

[@kevinbrooks6265]

so two outrunners on each side direct to the wheels . very cool.

[@linzitazim]

It's great to have these new innovations in our hobby.

[@eccentricsmithy2746]

Not practical at all, you will be replacing motors frequently. Dirt, dust and small rocks and pebbles will ruin those motors quickly. This has been tried many times and the reasons mentioned are why manufactures haven't put it out for production.

[@ZorroMS]

maybe... but you thought about it !

[@eccentricsmithy2746]

Dirk Meyer so whats your point captain obvious?

[@mandyice8743]

agreed it's not the best idea either!!! but man this bitch looks like it would fly!!!

[@willburke5384]

number one in electric in motor design. never heard of them.

[@Jari_Kuusisto]

"This is 124 m/h now thats fast" :D. Yes, that is REALLY fast, amazing...124 meters per hour, what a road runner

[@tizrc1358]

Dude that is insanely sick af

[@tizrc1358]

Freaking THE BEST I'VE SEEN..n trust me at 41 I've seen a lot

[@wheels6566]

Guys you can make one at 1/10 scale using a quadcopter and flight controller, mount a motor for each of wheels, the mounting of the motors would be tricky bit! But wow it would go!

[@moniquemc2864]

I think Castle should stop using the term overpowered on there advertising, this motor puts them to shame, Great work Tidnab

[@ronitsingh85]

Holy shit, I was wondering where the motor was!??? Damn thats cool!

[@Zytiron]

Funny how they fail to mention the side torque on the motor bearings. I thought of this years ago and found it to be a failing idea due to the amount of debris encountered within the wheel area and the amount of torque the bearing will go through when taking corners. There is a reason why they use in-runner motors on surface vehicles. All i see is a lot of people replacing motors at an alarming rate. Just like the 3D TV, this will only be a fad and will fade away within a few years. (RC'ing for 30+ years)

[@choke666]

RIGHT YOU WERE LOL! ALL VERY GOOD POINTS.

[@ModitRC]

that was more like 50kmh. For the people saying the bearings are issue, this is not true. All wheels have bearings behind them. The problem here would be rocks getting into the open outrunner design breaking and dislodging magnets. Should have used a sealed motor design to keep debri out, and massive water proof bearings.

[@Isuckatcod777]

Did you see how it blew that sheet of paper a few inches!! Woah! Mind blown!

[@iaguilera67]

how do you deal with the differential issues?

[@jvsyoutube3298]

should be connected to the steering channel on he reciever somehow, so you could adjust the different wheelspeeds activly when turning, that would be cool

[@thevintagehifiambassador8524]

I miss the automatic noise control,that the birds do not become angry!

[@surewynn1117]

At 6:48 he is demonstrating how the tires are ballooning. Seems pretty powerful to me. Love to have a 4wd setup

[@PRIMCOR]

this car will probably win all the races, I cant see who can keep up to this

[@johnprimavera1748]

This is nasty, after I saw the youtube video when they installed this little RC motor on a go cart, and that thing flying around with a full size adult on it, Im convinced this is the best RC motor out there. I WANT IT

[@medveds1]

Probably needs to be design to be completely enclosed. Great idea not needing transmissions etc but I think the unsprung weight might be an issue.

[@gert3674]

Very, very nice. Have a few questions: 1. How does it cope with dirt, stones, water, mud, etc? I imagine dirt getting between the magnets and the windings wouldn't be good? 2. What do the motors weigh? Do you notice a big difference in handling because of the added unsprung mass? Maybe it would make sense to make the motors so that no rims/axles/hexes are needed and the tires mount directly onto the motors to save some weight? 3. What ESCs do you use, is there some kind of traction control? I guess using two standard ESCs will feel like a completely locked rear diff when driving? 4. Do you have plans to offer different sizes and kv-ratings for other applications? I'd be interested in motors that fit in 1/5th scale touring car tires.

[@jop6663]

+Jo P Having tow motors allows for better handling, and as for the weight , it is less than the weight that is removed from the car when you install them, you remover the gas motor, the gas tank, mufflers and all the other parts in a few testings we did we added more weight to the cars

[@jop6663]

+Jo P www.hobbyking.com/hobbyking/store/__51657__TURNIGY_Plush_100A_w_UBEC_Speed_Controller.html this is what we used

[@jop6663]

+Jo P we can make different sizes and Kv

[@RCGrid]

He brings up good points, the added unsprung weight will not be good, you will always have locked differentials (not good at all for racing), and the motors are exposed to the elements such as water and stones....

[@sportcustom7141]

+RC Grid Thats exactly what I was thinking. I'll stick to the gas engine or the Can Brushless motors.

[@mellomisfit]

My jaw dropped when the wheel came off!!

[@shaolin224]

Did not see 200km/hr .more like 20 km/hr on the dirt and a few dudes jizzing over electric motors

[@mojip3043]

I like what I see..........keep up the great work

[@TheCuriousOrbs]

Nice work Milton

[@monsterrun]

this can be done actually in a different manner and it would work flawlessly.. The wheels have to be O rings and having a calliper that surrounds a segment of the wheel fixed with it's own miny transmission and brushless motors making the O ring wheels spins as fast a spur gear. (i would use low kv motors for this. because it's like running on the spur gear. LOL.

[@tiagopadua]

How well do the motors cope with all the bumpiness from being in the wheels? Do the bearings support such punishment?

[@MarkSvara]

Apologies if it’s been asked. How will the motors be protected against mud and sand entry?

[@scorchedcore4357]

mini direct hub drive , good bit of engineering ,hows the efficiency/torque compared to the standard brushless with drive train inc?

[@jdj62464]

I think this is like the 100th video on here claiming the "world's fastest RC car" no matter what the scale size is. According to the Guinness World Records the fastest RC car record is/was 177mph and that was set back in 2014. The same guy also ran that car at 196.21 again in 2014. I have no doubt that has since been broken and wouldn't be to hard to do, if you can get a Ducted Fan jet to fly 200+ mph then with the right gearing a 12s or 14s electric RC car can do it. For those that don't know the conversion 200 km/h is only 124.274 mph.

[@tylerbonser7686]

I suppose that is its theoretical top speed. But when you add in all the other factors when its actual on the road it would be far less.

[@kddrones7120]

LOL this guy checking motor temps with ZERO LOAD HAHAHHAHAH

[@tigranohanyan3321]

How they controll all 4 wheel motors, especially front ones during turn?

[@patrickellison4854]

How much for the system? What all is included? Will they fit inside the front wheels of a Baja to make them 4wheel drive? What voltage do they use? How well do they hold up to dirt and mud? I know the videos showed them being used at a baseball field, but I want to know how long were they tested in off road conditions.

[@patrickellison4854]

Never mind about the voltage. I must have missed it the first time I watched it. But please get rid of the music.

[@jop6663]

+Patrick Ellison we are working on the front wheel model now, as for the voltage we run them on 6S , 8S and 12S and we have run them with less as well

[@lordraptor11]

glad to see im not the only one that has issues with this idea, to be honest it might have etter application in larg scale rc aircraft but i wouldnt put it on a car there are others playing around with this idea but even their protoypes have a more refined aesthetically pleasing look to them, these look like you found them on the shop floor, and dont even get me started on the sparks just hooking them up to the battery.

[@shaunbrown1402]

I'm a little unconvinced of the speed, but the smoothness of the performance seem not to bad. the other thing is how much for the individual wheel motors, and what's the ingress like. Can't see them lasting more that ten runs

[@cncit]

Interesting..how does it corner if L and L wheels are going the same speed??

[@jasonkiefer2145]

what happens if dirt gets into it and is it just like a sloppy open diff or a locked diff

[@woshigepro2]

So, does it have torque vectoring ability ? If not, maybe you can do that .

[@retrodudefpv]

This has to be only an initial step as percentage unsprung weight on rear wheels would be horrendous. If the motors were inboard and connected to axles, I could see the point....

[@dumbchinescoding9957]

lmao the wing in the back is crocked

[@sinplomosrc2792]

Thats creepy, i want it haha! Awesome!

[@pats2295]

When are you racing the car with these motors I want to come out and check . I want to build a 4x4 , Can I get these motors by June

[@jamesrodgers1443]

Man that is just to COOL !!!!!

[@bitemykrank1970]

When you use the mirror in the shithouse to come up with your company name, then I guess this is the kind of thing you find exciting. Highly inventive think tanking conversation taking place I think... " Let's call ourselves Bandit, like the guy with the Trans Am in the movie, we make toys go really fast too....and neither of us can act either " " Nah, let's call ourselves Tidnab instead. It's WAAAY cooler..." This is why Namtab never made it as a super hero I assume.....

[@757nonstopgamer757]

Everyone is saying that its fake but when you think of it its not that far from the Traxxas XO-1 which already dose +160km/h (+100mph) STOCK and can still be modded

[@diktiw9172]

They will used it in space where there is no drag, gravity and resistance 😂😂😂

[@rc-jatodaniel]

Don´t claim any top speed if you not going to show it. No show equals no proof. That´s a fact.

[@joeym7911]

Any update on these? Haven't heard nothing in several months nor know anyone who has them.

[@Striky71]

C'est des Québécois! j'ai cru entendre un "asti" quand y'a enlevé la roue au début x)

[@BIGE3iNKC]

How do you guys plan on keeping rocks and debris from getting inside the motor and destroying the windings and such , everytime I have had an open case motor it’s been destroyed by a tiny Little Rock that’s got inside while running and ruined the motor

[@jessie38supercharged]

what happens when you drive in dusty or sandy conditions?

[@legallegal8128]

When are these up for sale, I think they would be great for the 1/3 size cars as well

[@jacobaherns9039]

Wheels in the air spin faster than when on the ground

[@cem19771]

will you guys be making this for 1/10 and 1/8 scale aswell john? because i would be extremely interested in those scales. oh and where are you guys located i want a job with you guys! i think you have something with this technology!

[@InTheFleshInc]

This is some cool innovation for sure wow

[@lordoftherins5181]

Amasing, can anyone please tell me what is in the wheels? and what is it for? The rims I mean, it looks like a magnet field, thanks

[@linzitazim]

belted tyres needed for this beast!

[@thegooserider7245]

And the first time you get dirt in the motor? Or the wheel locks up? I'm going to order one right now so I can make z video on how un practical it is

[@nickvledder]

6:44 We want more of this footage!!

[@ikariku]

This motors with coils and magnets exposed it's gonna fail.

[@rambow70]

I think that's why they had it playing in the dirt, to show it can handle that exact thing ha

[@renek9559]

well in mines every vehicle uses this type of motor - so why do you worry? :D

[@InTheFleshInc]

Always someone hating and spewing this OP can suck it like a pro.

[@ikariku]

+InTheFleshInc it's only an opinión.

[@InTheFleshInc]

+Gon Qu it's ok I get it, nothing personal. It just when you see so much negatively on what I believe has a lot of future potential, it's all trial and error that is what our country is founded on the industrial revolution.

[@netten9432]

liked you did the rpm n mph. cool car buggytruggy truck

[@Tommy-yc8dp]

Was sind das für Motoren und wo bekommt man so welche ???

[@alvinpatterson7607]

Awesome rig

[@Jarman42]

that's a nice rc car but I like the losi baja rey and the losi 5ive t, I like the losi 5ive t because its a good all terrqain monster and I like the baja rey because of its speed and suspension along with designs

[@RcAVENTURE.V.F.R]

nice bro thumbs up

[@redbull2007]

when we see speed test on the field, and not just numbers?

[@johnprimavera1748]

+Danny rechter I saw this car in action , let me tell you it moves faster than anything I have seen before

[@3rdaxis649]

KZbin video stabilization is making me sick...

[@maheshrookmin6722]

did built it on your own ur a great

[@michaellittlejohn8723]

Karma is automobile that has same type motors in wheel, used to be Fiskar Karma, but went out of business.

[@sparky9718]

Another poorly produced video polluting KZbin.

[@moniquemc2864]

Gary , lets look at what this guy is showing us , I think the idea is amazing

[@eugenelau1525]

As amazing as it seems how do you deal with dirt and debris getting into wheels and damaging the motor? What about turning? Without a differential you are going to hav wheel spin. The motors are also in a vulnerable position if you crash.

[@evanyang1969]

Hub motors and direct drives are common among electric skateboard

[@todddooley793]

what cool design! It must be very efficient. I was curious though, how is the handling with the extra sprung weight? Thank you for sharing!

[@michaelplaskett2947]

what are the cost of these motors?wil it werk on 4wd?

[@yzScott]

Enormous increase in unsprung mass.

[@SouthSideChiTown]

Less dramatic music, more actual demo please.

[@sideways4daystunewerksinc578]

Drive it and prove the whole car can get to that speed.

[@grahamwalkingshaw6344]

can i hook this thing up to apm or the likes to use as waypoint mission rover and also what would the speed limit be for the waypoints does anyone know ?

[@rokstaz]

What sort of run time are you getting from 9s and 12s?

[@didierneeferc]

But what if dirt and other stuff like stones come in the motors?

[@ramp-hasrcs3199]

how do you get more info on this if you don't do face book

[@pacificislander8503]

1/5 scale on road will be great for racing

[@ahmadk2619]

What motors did you use

[@samljer]

The titles false, theres one i seen in a HS thats a 1/5 says 216km/h in big yellow letters on the box. and that was last summer, before this video. If it was capable or not, is another story, but i didnt see this one carry itself at 200 either. And theres a youtube video on here of a guy who bought a car that goes well over 300.

[@paulklees9871]

How Much cost to change a wheel when is brockenbecause this is one of the most things sd demages what happend.

[@gigabytex64]

I like the setup but the speed you stated isn't the fastest as the Traxxas Rustler I own tops out at 237km With only a modification on ride height, gear ratio and wheel diameter as a change from the original setup. I do have plans to place a 2 speed box in it soon.