Rented a plate packer and ran out of diesel. Rental company said that the whole fuel system has to come apart to get the engine started again. Tried this trick and started immediately. Saved myself several hundred $$ in “repairs” by the rental company! Thank you for this video!
@carquestions Жыл бұрын
Anytime Phil - cheers from Canada!
@randyvanness12775 жыл бұрын
My case 1840 was down for 3 days. I bled the lines 3 times and nothing. I saw this video and tried it. It absolutely worked. Had it started in 10 seconds. Thanks bud!
@carquestions5 жыл бұрын
Anytime Randy!
@benmiller76965 жыл бұрын
I've been cussing my 1840 out all afternoon. The only good thing is that if ran out of fuel in my shop. 38 and raining here in Iowa today so at least I was working out of the rain. I've bled it half a dozen times, sacrificed at least one 14mm wrench to the black hole, ran the battery dead and it's still not showing any signs of life. If this method works for me tomorrow I am driving to your house and giving you a big man hug.
@traktorpriser7 жыл бұрын
Thank you for sharing this video - it was a real life saver. After 3 days of failed attempts to get my old Ford Backhoe running I was pulling my hair out, but this did the trick. I did find it easier to use a portable air compressor and a 'spray gun' usually used for cleaning - but filled with diesel it put out a fine spray, and I was able to keep the engine running for approx. a minute until the air was bled from the system, and it has been running since.
@carquestions7 жыл бұрын
Excellent result -- nothing like the sound of an engine that is running like a fined tuned machine eh?
@traktorpriser7 жыл бұрын
Exactly - I won't be forgetting this trick any time soon ;-)
@mikeozment40576 жыл бұрын
You saved my bacon!!! Thanks a bunch. We are traveling in a Sprinter van with a mercedes engine. This did the trick. Thankfully we are not stranded 500 miles from home.
@carquestions6 жыл бұрын
Good to hear - cheers!
@mardyn153 Жыл бұрын
Tried this method on my Kubota MX5200 as a last ditch effort before disassembling the tractor to access the injectors. Had to use a little starting fluid in combination with the fuel spray bottle but it worked long enough for the injector pump to purge the air from the fuel system.... thanks for the great idea. mardyn
@carquestions Жыл бұрын
Glad it helped Mardyn - thanks for the comment - Cheers from Canada!
@patgarrett37465 жыл бұрын
I just used this method this afternoon on my 1973 IH tractor. It worked great. I told my neighbor, who's farmed all of his life about it. He never heard of it but I bet he tries it.
@johnsalzo49442 жыл бұрын
This spray bottle to fire it up after changing fuel filter on diesel was a blessing. This was the first sure sweet easy way of purging or bleeding it it fired right up. I did push the throttle full at first. Thanks for the time saver.
@carquestions2 жыл бұрын
Anytime John - Cheers from Canada!
@somerled37874 жыл бұрын
Red Green would be proud as a peacock. I'll never forget his Car-B-Que episode. Greetings from rural BC. :-)
@MrBigbrotha4511 ай бұрын
Thanks man, you just got my 96 350 started for me..
@carquestions11 ай бұрын
Anytime BigBro - Cheers from Canada!
@Luxtraveler2475 жыл бұрын
Did the second person have to give full throttle at the same time?
@shadetreeprofessor57237 жыл бұрын
That's AWESOME!!! I bled my MF 135 and still didn't work. Then a cousin said to spray some diesel in there and it helped push it over the edge. I just wish I had seen this before I did all that bleeding. Oh well, now I know how to do it at least.
@carquestions7 жыл бұрын
Smart cousin
@curtwpk13615 жыл бұрын
I don't have a cousin, so I got a neighbor. Didn't work. We found my neighbor's cousin to spray the fuel and it worked right away. I don't understand why its important to have a cousin here.
@rpruneau683 жыл бұрын
@@curtwpk1361 just cuz
@matthewhayden16022 жыл бұрын
What a great Hack.......i just tried it on a Ford Trader and it worked well ........to think i believed all the bullshit about needing to bleed the system out..........thanks mate your a legend
@carquestions2 жыл бұрын
Anytime Matt - Cheers from Canada!
@GeeTrieste6 ай бұрын
Well that does look a shortcut, but it must depend somewhat on how much air is in the system, there is only so much the engine can pull to clear all the voids. This looks like a good thing to try after getting rid of most of the air, and pull the rest through.
@carquestions6 ай бұрын
Let me know if it works - Cheers from Canada!
@808pathfinder3 жыл бұрын
this is what i do on small gas engines i dint know this could work the same way ,thank for this great tip , i hit the like as a ty
@carquestions3 жыл бұрын
Thanks 808 - Cheers from Canada!
@willnicholas44746 жыл бұрын
Thank you very much for sharing! Worked great on a forklift I changed fuel filters on and lost all pressure to the fuel system. Even after filling the filters with diesel and trying starting fluid it wouldn’t start. This worked after I took the intake tube and sprayed diesel down the intake with the spray bottle. Also full fuel tank and charges batteries make a huge difference!
@carquestions6 жыл бұрын
Glad to hear it worked - cheers!
@johanfilipsson78405 жыл бұрын
This saved my day. Ran out fuel on my Ferguson 25 (1960, Perkins diesel). I sprayed start gas and diesel. Thanks alot.
@rogermcclary30074 жыл бұрын
I have a New Holland TD5030 that sat for a couple of years. Could not get it to start. I bled every fuel line, injector, pump and filter I could find. Still would not start. I used a combination of diesel and starting fluid ( approved for diesel engines ). Sprayed and squirted the cocktail into the air intake. Took a couple of tries, but that engine roared to life!!!! Can't thank you enough for the idea!!!!
@carquestions4 жыл бұрын
Glad it worked out Roger - cheers from Canada!
@marktant61116 жыл бұрын
Saved the day. Could not get the fuel to prime with the manual pump. Did as you demonstrated and she cranked right up
@carquestions6 жыл бұрын
Good to hear - cheers Mark!
@rusco3218 жыл бұрын
Nice trick! I wish I would've known about this trick when I ran my 2001 dodge ram 2500 with the 5.9 Cummins out of fuel. The fuel guage was reading 1/8 of a tank so at the time I didn't realize it was actually out of fuel. After a shop charged me $2300 to change out the injection pump, I once again ran out of fuel thinking the guage was accurate and that's when I finally put 2 and 2 together.
@rusco3218 жыл бұрын
I did put about $50 dollars worth of diesel in after the first incident, filled the filter bowl with diesel, but I didn't know enough to crack the lines open or use a spray bottle filled with diesel. Expensive lesson learned.
@carquestions8 жыл бұрын
Hope it saves you in the future
@alainbuerom86357 жыл бұрын
thanks a lot! it really works astonishingly with my 4m40 engine and it saves me a lot of money.
@carquestions7 жыл бұрын
No problem - anytime Alain
@martinv76514 жыл бұрын
I replied to Frank Grant's post, but for those who don't read replies- this worked fantastically on my JD 5300. Many thanks Mark!
@number1genoa4 жыл бұрын
Unfortunately no luck for me , even with the filter removed and spraying it directly into the manifold only got a couple of coughs, Next step is to consult a technician as I have run out of options.
@thomasdaly24712 жыл бұрын
My first attempt, using your trick on my IH 364, didn't work. Removing the air cleaner still left a long tube to the intake. No diesel mist reached the engine. After removing the hood and air intake hose between the air cleaner and engine, the engine started. It seems you have to be very close to the engine intake for it to work. It does take 2 people, but is a tremendous time-saver.
@carquestions2 жыл бұрын
I think you're right about that - the length of the intake tract determines how well it will work - Thanks Tom - Cheers from Canada!
@tmuss3 жыл бұрын
Just tried it on a '86 Ford 1210 and it worked like a charm. Sure beats the way I use to do it.
@carquestions3 жыл бұрын
Glad to hear it - Well done Tmuss - cheers!
@Skyrelaxation-s7z4 жыл бұрын
Worked a treat on my old 60’s fiat tractor. Thanks for the info, saved my bacon😂🤣
@ts85382 жыл бұрын
I followed your advice in starting up our Ford 420 tractor after the fuel pump was rebuilt. Like a number of other commenters on this video, I had to use some ether to initially get it going. I sprayed shorts bursts of ether and diesel alternately until it took off. I'm not sure why the diesel alone did not work (I tried this first). Do you know why the diesel alone would not do it?--Thanks for this video!
@carquestions2 жыл бұрын
TS - I think the intake tract of some diesels is shaped in such a way that little spray gets to the cylinder - the ether is more atomized and explosive so it does make it in - but you don't want to keep spraying it any longer than you have to. Cheers from Canada!
@ts85382 жыл бұрын
@@carquestions Thanks. That sounds about right. Anyway, it was fun shooting stuff in with both hands while yelling at my friend to give it more throttle.--Most excitement I've had in a long time.
@paulcalif6 жыл бұрын
Add my big thank you to the list. Got an old Deutz engine on a light tower running after changing all the rotted fuel lines. fired right up.... I cant even see the injectors on this thing but the air cleaner was easy to get to.
@carquestions6 жыл бұрын
Anytime Paul - cheers!
@bahramsedighi3 жыл бұрын
thank you so much, I tried it on Massey Ferguson 135 year 1974 loader tractor , it is very difficult to bleed injector nozzles, worked very well, appreciate
@carquestions3 жыл бұрын
anytime cheers from Canada
@moyreyes35083 жыл бұрын
Have the same one cant start it either. Gonna try this wish me luck
@stevenwarner30292 жыл бұрын
I'm going to try this on my Massey 255 is weekend. Because it hard as **** to do it any other way
@toddpanko48323 жыл бұрын
Thank you so much..it worked great..so happy it's running now
@carquestions3 жыл бұрын
Anytime Todd - glad t0 help - cheers from Canada!
@rajgill75765 жыл бұрын
Whats the difference between doing this and starter fluid? I have this starter fluid that advertises works on diesels and it seems to start my Vw rabbit caddy 1.9L mechanical up just fine
@daalhoffarm4 жыл бұрын
With using gas or starter fluid a diesel engine will knock and will pre ignite to fast. I made that mistake myself on a Yanmar diesel 2.4L
@project.prototype5 жыл бұрын
My 2009 f350 is having this problem right now. Is there any possobly harm to the engine doing this ??
@carquestions5 жыл бұрын
Nope
@vladtexas6 жыл бұрын
Will this work on my turbo 4.1 liter Perkins 4 cylinder engine once I replace the fuel filter ? No need for bleeding? I'll fill fuel filter with diesel first.
@carquestions6 жыл бұрын
It should - try it and let me know how it works
@rvmco6 жыл бұрын
worked like a charm on my MF245 after I bled the system to no luck. Sprayed into the air intake for about a minute (stopped halfway through to let ignition coil cool down per MF handbook). Will have to remember this in the future!
@carquestions6 жыл бұрын
Excellent result Richard!
@michaeldickson37036 жыл бұрын
A diesel wouldn't have an ignition coil surely?!?
@swatpigbbq5 жыл бұрын
I have a 5.9l 12v mechanical and it won’t pull fuel past the injection pump, would this be something I can do?
@carquestions5 жыл бұрын
lift pump maybe
@swatpigbbq5 жыл бұрын
carquestions yes, it’s in the mail lol
@scottwaddington37795 жыл бұрын
Worked on my 434 international. Great thanks
@carquestions5 жыл бұрын
Excellent - cheers Scott
@tecnaman90978 жыл бұрын
I've done this before with Aerostart fluid (not sure what the same stuffs called in Canada?). Never thought of diesel in a spray bottle though...great idea. Hope some dude doesn't try this with petrol in a spray bottle with his petrol engine.LOL
@carquestions8 жыл бұрын
Wouldn't be good - thats for sure - in Canada we just call it ether or starting fluid
@mikeward69253 жыл бұрын
Thanks a lot - your tip saved me hours
@carquestions3 жыл бұрын
Anytime Mike - glad it worked - Cheers From Canada!
@Bbrezo10 ай бұрын
Does anyone have experience with single cylinder diesel engine KM186FAG or 186f generator starting this way? I am going to try this one on KIPOR KDE6700TA3 generator. It has been constant pain to start it. New gas pump, injector went for inspection, bleeding air every time, changing fuel for fresh one still no avail. Also, I'll try to warm air intake with heater. Saw a guy doing it and it went very good.
@carquestions10 ай бұрын
Is the tank mounted above the engine?
@Bbrezo10 ай бұрын
@@carquestions Yes. Its slight in the front of the engine but above engine level. Then fuel goes down to the pump which is crankshaft driven and high pressure to injector. Return fuel goes back to tank. Thank you.
@heybird56603 жыл бұрын
You could also do it the correct way & open the bleed screw on the connection where the fuel goes into the injector pump. If the thumb screw is missing you just open it with a pair of pliers or multigrips.
@carquestions3 жыл бұрын
Tried that - sometimes they are blocked with crud - good tip though - thanks
@heybird56603 жыл бұрын
@@carquestions undo the nut retaining the needle valve & screw it right out & clean it. Its a shit set up & i dont know why kubota have it. Actually when i bleed them i do that anyway you can see when all the air is gone.
@carquestions3 жыл бұрын
@@heybird5660 Did that after I got out of the hog pen - need to work fast with a 500 pound hog eyeing you
@heybird56603 жыл бұрын
@@carquestions yeah i can understand that i,m glad it was you & not me hahaha
@C-Fury_LTD2 жыл бұрын
@@carquestions Real world pressures - you do what gets you out of trouble fast - great tip, thank you!
@gkk20014 жыл бұрын
Excellent idea. Why didn't I think of that?!
@GenesisFernandez15 жыл бұрын
CAN it also work on a Jaguar X type? I changed the injectors and now the engine won’t start. Also does anybody know why the car make this huge TAK TAK TAK noise when I start it with starter fluid?
@carquestions5 жыл бұрын
don't use starter fluid - use this method
@Jeremybaland5 жыл бұрын
DO NOT use starter fluid in a diesel. It combusts at a different time and can crack the piston.
@jerrymadin16565 жыл бұрын
I like this shortcut, you do tips. Thanks a lot
@bobcat84394 жыл бұрын
It told my buddy about this DTJ dump truck Joe usually he'd I say I knew about that not this time time lol
@tswelding48154 жыл бұрын
I got a Case 530 ck I have done a little bleeding work but still has air. Do you think this method will work? Also I am new to diesels so my biggest fear is that thing trying to take off and runaway and not being able to stop it covering the top intake.
@wreckandraceify6 жыл бұрын
I've used a couple snorts or ether when I blew a line on a tractor, always sounds awful for a min or 2, I like this diesel spray bottle alot better. I've heard of guys going this with WD 40, not sure how good it is on the engine though.
@carquestions6 жыл бұрын
Thanks for the comment wreck!
@amg98566 жыл бұрын
Shouldn't use either. The diesel should be fine. Might want to wipe it done inside after your done to prevent debris from collecting in the system. Ether can really damage your diesel engine. A lot of diesel engines tend to have issues that stem from improper use causing wet stacking to the exhaust system. You typically want to use them at a minimum of 60% torque ratio. Even if you don't have a dpf your engine still needs to meet this. If your engine is running in idle for more than 10 minutes you are hurting it. This will lead to the exhaust to start to back up in the system, and you'll notice the soot building in your pipes when you remove the exhaust from the manifold. It with make its way more in-depth, and start breaking down the system. Not all ports of your glow plugs are large enough to get a borescope into, but if you can get one in there you can start to realise the damage that is being done.
@amg98566 жыл бұрын
This is also where indications of ether being used can be seen.
@richardc77216 жыл бұрын
WD40 is easier on the engine than starting fluid. Key to it is easy on the fluid. Another way is to take cheese cloth and spray a small amount of gasoline on it while the rag is covering the intake opening. Only gas vapor will be drawn in. Learned that 40years ago from an old time heavy equipment field mechanic. Used this method many times over 4 decades with no issues.
@nivanah40186 жыл бұрын
@@richardc7721 so would work ok on a komatsu dozer
@stanktail3 жыл бұрын
You got away with it because it's an old indirect injection non-turbo. Do that on a modern common rail, you might hydro lock the engine = busted piston or bent rod, or burn up high pressure pump due to no lubrication.
@number1genoa4 жыл бұрын
I have a 3 cyl Kubota tractor that wont start , I have have been bleeding and cranking for 3 days. Shop manual procedure is not helping so I will try this. I have some ether based Easy Start but this looks safer . Fingers crossed !
@martinv76514 жыл бұрын
Same situation: JD5300 with a 3 cyl Yanmar, have gone through this before, this time even pressurizing the fuel tank didn't work. Saw this yesterday afternoon after a bloodless :) day, going out to try it now.
@martinv76514 жыл бұрын
Started right up! Thank you, thank you, thank you!
@joshthompson79477 жыл бұрын
I really hope this works I'm in a real jam here. shouldn't have bought a diesel I'm not educated enough on them.
@carquestions7 жыл бұрын
It'll work if the fuel system is in good shape - no leaks or broken parts
@danielwalker56826 жыл бұрын
Is there any danger that running the injector pump dry at ~high speed might damage it?
@carquestions6 жыл бұрын
A minute or two won't hurt
@Clare.19854 жыл бұрын
I'm a diesel noob and I'm just asking if anyone could please explain how this method bleeds air out of the fuel system? Thank you
@carquestions4 жыл бұрын
The fuel systems are supposed to be self priming to some extent but most don't do it it well at cranking speeds - if you can get the engine running at higher speeds and for a couple of minutes then the fuel pump most times will suck in enough fuel and purge the air itself and you're off to the races
@Clare.19854 жыл бұрын
@@carquestions thank you
@Z71Ranger7 жыл бұрын
Cool I will have to remember this tip.
@carquestions7 жыл бұрын
It works good Z
@phillipschuller791 Жыл бұрын
If you have air in your system, you have to remove the air. Sometimes you have to bleed it
@jervinosmith62707 жыл бұрын
Will this work on a turbo diesel engine
@carquestions7 жыл бұрын
Yep - no problem -
@ronaldhall21034 жыл бұрын
We'll see tomorrow , been bleeding for a week , no results .
@sunnysacto7 жыл бұрын
Fast and easy. Thanks for sharing
@carquestions7 жыл бұрын
no problem sunny
@sunnysacto7 жыл бұрын
Learning with KZbin folks is excellent. From Sunny CA Valley
@sunnysacto7 жыл бұрын
I replace fuel filter, now I can't get fuel to injector. Your method didn't help :( Any ideas? Filter is loaded with fuel.
@jxaxrxlx4 жыл бұрын
Never seen anyone use diesel before 🤔. That’s so much smarter that using gas or start fluids which can damage is engine.
@carquestions4 жыл бұрын
Just makes sense - Cheers from Canada Diesel
@mikewest712 Жыл бұрын
Just did this to my Kubota grasshopper. Pretty sure major engine damage was achieved due to over revving.
@carquestions Жыл бұрын
How much and how long did you spray?
@FellerofTrees Жыл бұрын
Most grasshopper diesels have a label on the air filter assembly specifically telling you not to do this.
@MrSmg1038 жыл бұрын
great video☺
@carquestions8 жыл бұрын
Thanks - hope it saves you some time
@Owl49099 ай бұрын
im getting told even though i have it running there is still air . it runs fine until i use it ,, it surges and eventually dies , it will start again on its own . It was doing that before i had to bleed lines. I know somebody knows what this is .
@carquestions9 ай бұрын
Happens to us all Owl - let us know what type of make and model you have and maybe some people can offer some advice - Cheers from Canada!
@Owl49099 ай бұрын
@@carquestions 80s JD 410 backhoe
@bobcat84394 жыл бұрын
I accidentally put gas in my bobcat .I think I caught it in time . I'll try ur technece when I drain the tank.thanks
@carquestions4 жыл бұрын
let me know how you make out
@kylebykiv77714 жыл бұрын
I would suggest cracking the lines off at the injectors and bumping the lift pump with diesel in the tank to clear the lines. This technique does work but it’s hard on your injectors
@TheOldRec4 жыл бұрын
Thank you, Thank you, Thank you, Thank you, Thank you. It works and is so easy,
@carquestions4 жыл бұрын
Glad it helped Mike - cheers from Canada!
@michaelterechow18595 жыл бұрын
What about intercooled turbo engines?
@carquestions5 жыл бұрын
Bypass the intercooler
@britkasablja0074 жыл бұрын
Hi, can i spray diesel diesel on OPEL zafira 2.0 dti? or do i need starter spray?
@carquestions4 жыл бұрын
Yes - won't hurt anything
@kenvoigt36365 жыл бұрын
I tried it on my Perkins AD4 engine in my Backhoe and it didn't work, I just had to keep working to get the air out of the system after changing the secondary fuel filter, I didn't think I was ever going to get it going.
@kenvoigt36365 жыл бұрын
I know what you mean, I got air in my system after changing the secondary filter, I must have pumped the handle on the fuel pump 2,000 times and finally gave up that it was going to pump anyting, I had to send for a pump and it was made in China and also pumped nothing, I then sent for another pump, this one had no name on it or any numbers and it pumped nothing, I finally gave up and had to invent my own electric pump system and it works good, my backhoe is a 1971 model MF.
@number1genoa4 жыл бұрын
@@kenvoigt3636 We had the same problem on the Perkins 4108 in out yacht, they are notoriously difficult to bleed. We installed a primer bulb from a OB fuel tank, works a treat.
@southeasternnews93337 жыл бұрын
Didn’t work, even though we followed your step-by-step tutorial- after replacing the fuel filter on a 1220 Ford HST diesel tractor, it won’t start, have to get a more specific solution for this engine-will deal with it in the morning, thanks anyway.
@carquestions7 жыл бұрын
Try a little bit of ether - if that doesn't work your spraying it on the wrong side of the turbo - the diesel in the video had no turbo
@kevedamanyo6 жыл бұрын
does it hurt the turbo? or supposed to unhook stuff and go on back side of it? my 6.5 Detroit is not running more than five seconds has relocated Pmd, new filters, screen, lift pump, purged return line to bubble thru tank, no explanation other than bad IP. but runs great when it starts for five seconds then stall and wait few hours starts again. if your idea keeps it running then I have a fuel problem, not an IP prob....I was ready to order IP until this video. I tried this myself and still stalled, but when I get a second person to crank, going to try again, here's to hoping. but I can't spray before the turbo? it's ez to spray in with air filter removed, but needs some tools involved if have to avoid turbo
@BC4Lyphe7 жыл бұрын
yea buddy! gittin er done!
@carquestions7 жыл бұрын
Works like a charm
@myridny6 жыл бұрын
Are you foolin me. It’s that easy
@carquestions6 жыл бұрын
Yep = works like a charm if nothing else is busted
@rdg15812 жыл бұрын
My John Deere 3042e did not work it was useless why?
@carquestions2 жыл бұрын
other issue besides fuel? - mechanical maybe
@larrydavis27033 жыл бұрын
Will this work on a kubota MX4700 tractor?
@larrydavis27033 жыл бұрын
Worked like a charm! Thanks for sharing!
@carquestions3 жыл бұрын
Anytime Larry - Cheers from Canada!
@maxsands38616 жыл бұрын
I don't know how many times I've replaced my lift pump in my thomas, finally dumped it and replaced with electric now it bleeds with a turn of the key.
@carquestions6 жыл бұрын
I hear ya Max - good info
@julennavin94746 жыл бұрын
Saved me man saved me thank you
@hondatrix8 жыл бұрын
There will still be so,e air in the system...might need to bleed it again.
@carquestions8 жыл бұрын
This machine has run fine ever since no need
@axtra924 жыл бұрын
What Are You spraying?
@carquestions4 жыл бұрын
Diesel fuel
@cbr1thou4 жыл бұрын
Hoss piss
@FERNANDOOLIVERAS5 жыл бұрын
This is good for a boom lift too??
@jasoncreed63962 жыл бұрын
Aww man it's not working why??? It started for 30 seconds and died and started for short bits but now it won't do anything
@noahmira4788 Жыл бұрын
probably more air in the fuel lines
@E3CB4 жыл бұрын
Thank you! Cool trick! :)
@gordonemery69495 жыл бұрын
1903? Is that the model or the year?
@austinhammett93045 жыл бұрын
1.903L of displacement
@oscarpacheco13414 жыл бұрын
Thank u very helpful
@michaelmcclure86736 жыл бұрын
This is a much better way than starting fluid.
@carquestions6 жыл бұрын
Safer for sure
@thatbiguy19756 жыл бұрын
im confused- im new to diesel and i hear this said a lot buy my 73 ford 7500 construction backhoe loader came from the factory with ether injection and no glo plugs. the old guy i bought it from said he has been starting it with ether/starting fluid for over 20 years he owned it with no problems so thats what i do. only needs a shot if it's cold or sitting for a long time maybe. seems wrong to me but must be ok??
@carquestions6 жыл бұрын
J - this procedure isn't for normal starting - its for when you have run it out of fuel and it won't prime - keep using your starting method for normal starting
@jasoncreed63962 жыл бұрын
I'm so frustrated and confused
@deansmith47497 жыл бұрын
No piglets were injured whilst making this video...........
@carquestions7 жыл бұрын
Thats right
@vgevlogsgamesentertainment6 жыл бұрын
i am gona try it on my yanmar tomorrow
@carquestions6 жыл бұрын
hope it works for you
@TheDoughGetta6 жыл бұрын
Did it work?
@christopherwilliams84236 жыл бұрын
Saved me a lot of headache. I used wd40
@carquestions6 жыл бұрын
Great result......cheers!
@kbar15905 жыл бұрын
Gasoline soaked rag works also.
@groundeddutchman58524 жыл бұрын
Thats how we always did it on the farm.
@lumberjackdreamer62677 ай бұрын
Newer diesel machines have turbo. The intake is not accessible.
@carquestions7 ай бұрын
Good point LJD -- so spray way more - they still suck air one way or the other Cheers from Canada!
@lumberjackdreamer62677 ай бұрын
@@carquestions From the air intake, there’s the turbo, then the inter cooler, then potentially the throttle plate, and finally the intake manifold…
@carquestions7 ай бұрын
Your right - a lot of stuff - but they still run if the turbo goes - so spray only while cranking it has to get in at some point doesn't it?@@lumberjackdreamer6267
@lumberjackdreamer62677 ай бұрын
@@carquestions The turbo doesn’t spin when cranking. Turbo needs high velocity exhaust gases to spin.
@carquestions7 ай бұрын
Even if the turbo is broken and doesn't spin air goes past their blades doesn't it. Turbo blades are shaped to push air - they don't have any seal like a valve does - my point is air will get through the turbo even if it isn't spinning - turbos are not air tight designs.@@lumberjackdreamer6267
@kareemgalaroza8226 жыл бұрын
the air in the fuel lines might be gone but... the bubbles are still there.. lol!
@carquestions6 жыл бұрын
long gone after a few minutes
@najib30667 жыл бұрын
wath s his name mtors
@AS-we9xi3 жыл бұрын
Terrible idea. A diesel is supposed to have hot compressed air and be timed by the start of injection. This is providing fuel and letting it ignite whenever compression is high enough. No control over timing. Easier way - crack your bleeder, take the fuel return line off somewhere, crack the bleeder and shoot a small amount of compressed air into the tank return fitting with a portable tank and a blow gun, then put your finger over it. Not a lot, just enough that there is a small amount of residual pressure in the tank. Too much and you can rupture the tank. Keep going until steady fuel comes out of the bleeder, then tighten the bleeder and hook the vent back up. If you didn't crank it too much and get air in the injector hard lines it will probably fire instantly.
@carquestions3 жыл бұрын
Terrible idea - your truck, tractor or Bobcat etc never breaks down near an aircompressor - and I can count on one finger how many people carry around an air pig that is full - jumper cables yes - air pigs no
@AS-we9xi3 жыл бұрын
@@carquestions ok.. How many people carry around a 2nd set of pistons and rings for when you crack the lands from letting it preignite.
@jervinosmith62707 жыл бұрын
I think my lift pump is out
@carquestions7 жыл бұрын
If the fuel fails to get to the injection pump then you are right Jervino
@jervinosmith62707 жыл бұрын
Yeah i jump out my fuel relay and no fuel came up by the injection pump
@josdedam Жыл бұрын
Trying on a MF110, Ran on fumes, lol
@carquestions Жыл бұрын
Did it work? Cheers from Canada!
@bobcat84394 жыл бұрын
Awsome/easy too
@carquestions4 жыл бұрын
Hope it helped Scott
@radamson12 жыл бұрын
That don't always work!
@carquestions2 жыл бұрын
Ya - some systems have various bends or valves in the way - but in theory if you can get it past the intake valves .....
@radamson12 жыл бұрын
@@carquestions I have used it hundreds of times along with pulling, using wd40 and a half a dozen other tricks. But some times you just have to bleed the lines.
@najib30667 жыл бұрын
nam motors please
@carquestions7 жыл бұрын
please improve your question or write it in your own language and I'll try to get it translated
@523bmw6 жыл бұрын
Have anyone tried on a diesel car?
@carquestions6 жыл бұрын
Yep - it works Oscar
@captnshane19697 жыл бұрын
cut the first 1:30 of the video... too much talking and walking... just get the job done
@cleric0226846 жыл бұрын
make your own video fool
@gyffjogofl76766 жыл бұрын
I thought it was a great video.
@oby-16076 жыл бұрын
I thought the piggies were gonna be more involved.
@JHorse5086 жыл бұрын
Wow the vid was literally just over 3 mins
@adamcreager7703 жыл бұрын
Your wife’s a lucky girl. “Just get the job done...” lmao 😂
@phillipschuller791 Жыл бұрын
If you have air in your system, you have to remove the air. Sometimes you have to bleed it
@carquestions Жыл бұрын
Yes that's true but once running most systems will bleed air out quickly and high rpm (running helps a lot)