The Fastest Way to Model Pipe Joints and Intersections in Blender 2.8 (Not Curves) Tutorial

  Рет қаралды 110,289

CG Cookie

CG Cookie

Күн бұрын

Пікірлер
@DrTheRich
@DrTheRich 5 жыл бұрын
Holy moly 11 years in blender and still didn't know you could make a curve with bridge edge loops. Blender keeps surprising me every time
@voxthesergal
@voxthesergal 4 жыл бұрын
Look, I've been doin' pipes via lines and beziers my whole 7 years, and it wasn't until I wanted to make a Y-shaped pipe that I googled this. HOLY hell you made my life SO MUCH EASIER man.
@DustyScreensaver
@DustyScreensaver 5 жыл бұрын
So glad 2.8 is a stepping stone to get away from the abundance of outdated tutorials.
@ShuyaTheDark
@ShuyaTheDark 2 жыл бұрын
I was going to complain that 10 minutes was not fast, but the whole video had very valuable information. Thanks!
@arianullah6257
@arianullah6257 5 жыл бұрын
Please do more of these tips, I wish I had learned this a few months earlier. Thanks for the tips.
@lacai527
@lacai527 3 жыл бұрын
Like 20 years I last time fired up Blender! That looks easy and perfect what im planning, sure Will probably rewind this video 537310 times while learning! Missed my target by a lot! learned this trick in a hour! Great video! basically first time blender user!
@sambowen
@sambowen 5 жыл бұрын
Another thing to check out, the built in plugin, extra objects. Under add mesh, it adds a menu called mechanical. In there it had options for 5 different pipe joints. Not sure if it's in 2.80 yet or not though. I was also going to mention using spin, but then saw you mentioned it. It is a good option I think, but you have to keep setting the cursor where you want it.
@0briang0
@0briang0 5 жыл бұрын
I got Extra Objects for 2.80 from github.com/sobotka/blender-addons (as well as loads of other 2.80-ready addons).
@chunkytoads4509
@chunkytoads4509 3 жыл бұрын
Best recommendation ever! That plug in saved a ton of time, much appreciated :)
@musashidanmcgrath
@musashidanmcgrath 5 жыл бұрын
One of the biggest things I miss from Max in Blender is the Spline tools. Only using Blender a month or so but the way I've been creating pipes is by extruding verts(snapping them to xyz and 90 degrees) beveling the corners and converting mesh>curve. It looks like the Speedflow addon fixes all these hacks with the Tubify tool, but it isn't ported to 2.80 yet.
@tom_paul_3d
@tom_paul_3d 5 жыл бұрын
that's not a hack, the tubify tool just executes exactly what you just said in code, HardOps does that as well.
@musashidanmcgrath
@musashidanmcgrath 5 жыл бұрын
@@tom_paul_3d Yeah mate, what I meant by hacks was all these crazy methods and steps shown in this video to do something so simple.
@ghostriley22
@ghostriley22 5 жыл бұрын
@@tom_paul_3d Can you specify the hardops tool you are talking about
@tom_paul_3d
@tom_paul_3d 5 жыл бұрын
@@ghostriley22 zure, it's the adjust curve tool, once youve converted the line to a curve, just hit q and adjust curve, it doesnt do exactly what was specified but it was kind of an example of shortened pack of tasks
@DrTheRich
@DrTheRich 5 жыл бұрын
But blender does have splines.... He just showed it in the video...
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
6:54 Ah, finally, you get to the point of what’s new and improved in 2.8. Is the 2.79 version that hard to use? I never thought so ... Particularly since it only takes the view orientation and 3D cursor position to initialize the spin origin and axis; once you start tweaking the settings, you can change these values independently of the cursor position and view orientation, and vice versa.
@jimsin101
@jimsin101 3 жыл бұрын
If only I'd seen this when I started a few months ago, I'd have saved soooo much time! Thank you.
@TheDeepDiveOriginal
@TheDeepDiveOriginal 5 жыл бұрын
Outstanding explanation, but dude, nothing can beat curves and you know it )
@cg_cookie
@cg_cookie 5 жыл бұрын
I'll race ya 😉 Really though, curves are great! Just depends on the situation.
@ELBARTOmovies
@ELBARTOmovies 4 жыл бұрын
That's the tutorial I needed. Switched from Maya to Blender since 2.8 to have a free alternative. The Blender UI is on point. 👌
@thebirdhasbeencharged
@thebirdhasbeencharged 5 жыл бұрын
Finally some content instead of the lazy "classics"
@elektrofox2746
@elektrofox2746 5 жыл бұрын
Okay but Ian Hubert's "Lazy Tutorials for Lazy People" friggin rock
@mycroft16
@mycroft16 4 жыл бұрын
Many thanks.Been looking for a good way to do pipes. Need to run a bunch of pipes along a surface in a group and have them branch off to different endpoints. Life saver!
@cryscameron9016
@cryscameron9016 4 жыл бұрын
thank you a ton! i watch 5 other tutorials last night trying to fix a problem and you solved it in a few minutes flat! ;)
@lukasmirek1271
@lukasmirek1271 4 жыл бұрын
About curves, You don't have to manually reduce the topology after converting them to the mesh, there is a "shape tab" inside the curve properties panel called "Resolution preview U" that allows you to control the subdivision level of your curve
@clex2349
@clex2349 5 жыл бұрын
Every time he does anything: “But wait- There’s more”
@mcg1007
@mcg1007 4 жыл бұрын
hi
@Marco-in3yk
@Marco-in3yk 4 жыл бұрын
@@mcg1007 hi
@mezzotint4274
@mezzotint4274 5 жыл бұрын
If I consider, what crazy workarounds there are on youtube with this theme..... Which don't work for me. This is so great, especially with the spin tool. Thanks.
@Fix44
@Fix44 3 жыл бұрын
make sure when you " bridge edge loops" that the desired ede you want to connect is selected using the line selecting in edit mode
@mikebennewitz
@mikebennewitz 5 жыл бұрын
I did not know you could boolean like that within a mesh. that's awesome.
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
1:38 Why not create it as a mesh to begin with? Use the Spin function to create the bend from a simple circle/polygon of some desired number of vertices. Then extrude from each end of the bend to create straight sections as long as you like, with minimal addition of extra vertices.
@yourfriendlygamedev
@yourfriendlygamedev 3 жыл бұрын
Sick. I had been using bridge edge loops, but the spin tool is actually super useful. Cheers!
@Ophelos
@Ophelos 5 жыл бұрын
It's great to see more tips coming out for Blender 2.8. Thank you for this.
@l.clevelandmajor9931
@l.clevelandmajor9931 5 жыл бұрын
This makes Blender 2.80 look more and more awesome. I think the Spin Tool is perhaps the best one to use for the bend in pipes. That said, there is a tool I use in another free modeling program, which to me is much easier to use, and it gives great results. The program is called Wings 3D, and the tool I am speaking of is called the Bend Tool. It does require that sufficient edge loops be in the area of the bend, but once it is set per your parameters for the bend, holding Ctrl will make the pipe bend by 1 degree steps, or holding Shift will make it bend by 15 degree steps as you drag the mouse left or right. The setup is simple to do, and when the operation is completed, you get a nice looking even bend. I thought that Blender had a similar tool for such operations. Could you explore this and let us know if 2.80 does have it? My reason for asking is because while I like Wings 3D for what it does have, the program has no Boolean Operations feature, so creating pipe intersections in Wings 3D becomes a rather hit and miss type operation. Not very efficient. I have figured ways out to do such intersections, but Blender's Boolean Operations feature makes much quicker work of it. Thanks.
@Confuseddave
@Confuseddave 5 жыл бұрын
Like you said, I think probably the gold standard for accuracy is probably going to be the spin tool, and it's not too complicated to use. Frankly, having watched a couple of examples of the bend tool in wings, it seems pretty unwieldy to me, so it's probably just a case of getting used to a different workflow! That said, for the kind of effect you're describing, I can think of two possiblities to do something vaguely similar in Blender, but neither are particularly optimal. The first is to use proportional editing: add your required geometry with ctrl-R, and with the top loops selected and proportional editing turned on and set to "linear", rotate the loops into position (you'll probably need to set the 3d cursor appropriately to get the effect you want), and use the scroll wheel to set the proportional editing radius to include the geometry you want to bend. That's probably a little imprecise however, since it might be pretty hard to match the proportional editing radius to your geometry; you'll also be limited to a single rotation step, since once it's curved the distance between the geometry will be uneven and the linear falloff of the proportional editing function won't spread evenly through your curve. the advantage is that if you have geometry above the bend, you can rotate it with the top loop and preserve it's relationship with the rest of the mesh. The other option would be to separate the geometry you want to bend into it's own object (or select it with vertex groups) and then use the Simple Deform modifier set to "bend". You'll almost certainly need to add an empty to get the orientation and rotation centre of your bend correct. It's a bit kludgey, and for simple pipe bends it's massive overkill, but it can be a useful trick to have up your sleeve.
@antanaspaskauskas9432
@antanaspaskauskas9432 4 жыл бұрын
If I have watched this earlier, it would have saved me hours!
@cg_cookie
@cg_cookie 4 жыл бұрын
Glad you found it eventually!
@antanaspaskauskas9432
@antanaspaskauskas9432 4 жыл бұрын
@@cg_cookie Thanks!
@BLOODCHROMEDESIGN
@BLOODCHROMEDESIGN 5 жыл бұрын
Spin tool is much more intuitive now, definitely my go-to for pipes
@yuwish6320
@yuwish6320 3 жыл бұрын
Extremely helpful. I had no idea you could boolean mesh parts inside edit mode.
@RoJamMo
@RoJamMo 5 жыл бұрын
Additionally, for the bevel at 10:00 also select the edge loop around pipe to allow a cleaner bigger bevel, :)
5 жыл бұрын
Very good tutorial on so many things. What do you think of the new pipe addon to the Fluent plugin?
@josephburgan3D
@josephburgan3D 5 жыл бұрын
Also, use Bevel "Percent" mode. If you use the shear tool to get your corner, put straight edge loops where you want your elbow curve to end. Then Bevel with percent at 100% and increase the segments. Then merge by distance. That's another way!
@DarkPhantomchannel
@DarkPhantomchannel 5 жыл бұрын
LOL spin would have been my first choice. It's very useful for various things!
@luchvk
@luchvk 5 жыл бұрын
Great video! I've already tried using the spin tool but I didn't know how it works. Thanks for going over this and showing other examples that are ok even if they're not as efficient/effective. The pipe merging tip was good too.
@daniele.7913
@daniele.7913 5 жыл бұрын
A pipe modifier would be nice. :) Also, knife tool with angle constraint and cut through is very helpful for pipes. I made a video showing this.
@CRogers
@CRogers 5 жыл бұрын
There is one. Its called the skin modifier.
@daniele.7913
@daniele.7913 5 жыл бұрын
@@CRogers Yes and no. There is no option to control the resolution.
@CRogers
@CRogers 5 жыл бұрын
@@daniele.7913 add a subsurface mod, and check smooth shading in the skin modifier. crogersmedia.com/samples/pipe_cube_skin_modifier.png
@daniele.7913
@daniele.7913 5 жыл бұрын
@@CRogers I know what you meant. The cross-section is not a circle, because sub-div (Catmull-Clak) on a square does not results in a circle. Also a lot of unnecessary geometry. We have to wait for everything nodes.
@CRogers
@CRogers 5 жыл бұрын
@@daniele.7913 it's not a perfect circle, no. It's definitely close enough for ornamental pipes, however (even close up it's hard to tell). It's also a wicked-fast way to make pipes and saves a lot of work (and waiting for a "real" pipe modifier). The extra geometry can be dialed up and down with the subsurface modifier, so not sure if that little extra circle precision is worth all the extra trouble. You can always apply the geometry and dissolve the extra bits if it really matters. obviously, the more accurate your circle the more geometry that incurs, so... ¯\_(ツ)_/¯
@richardgarber4618
@richardgarber4618 5 жыл бұрын
Thanks for making this tutorial it was great to watch! But 2.8... what slows me from switching to it is I don't understand what 2.8 is doing with plug-ins. I'm lost on that and the only reason I haven't switched yet. Can you guys do a tutorial on that too? My apologies for bringing up a change of topic like this.
@travisyee7278
@travisyee7278 3 жыл бұрын
Really great pipe tutorial.
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
9:13 This sort of works in 2.79.x as well. Needs a bit of patching up afterwards.
@globglob3D
@globglob3D 5 жыл бұрын
Nice video! I can't believe I never played with the spin tool before. Thanks!
@jjc1mowery
@jjc1mowery 5 жыл бұрын
You should do a tutorial for animating cables and wires. I have to do this for work using the Curve modifier, but sometimes the assets need to be imported into Unity, and it does not recognize modifiers.
@leecaste
@leecaste 5 жыл бұрын
Why don't you bake the animation into the geometry and export it as alembic, or does it need to be rigged?
@jjc1mowery
@jjc1mowery 5 жыл бұрын
@@leecaste It doesnt seem to work. The modifier is what allows the wire to move along the curve smoothly. I can bake the animation, but not the modifier, so when applied it throws it all out of whack. I dont really know how else to desrcribe it lol
@leecaste
@leecaste 5 жыл бұрын
I'm not a blender user, I'm afraid I can't help you with that, sorry.
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
2:12 Or you can use edge-select mode and select just those edge loops you want to dissolve away.
@olliveraira6122
@olliveraira6122 5 жыл бұрын
Actual solutions at: 5:50 Well done stretching this video to past 10 mins
@EDITMODE
@EDITMODE 5 жыл бұрын
Thanks for all your amazing tips :D it's always entertaining to mess around with tools on the days I dont have any actual project inspiration.
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
2:40 You could have avoided that by choosing a suitable radius of curvature for the bend (relative to the bevel thickness) to begin with.
@combeechan
@combeechan 5 жыл бұрын
Thank you for this video! How will CGCookie be handling the update to 2.8? Will you all be updating some of the older tutorial series?
@onemanteam1
@onemanteam1 5 жыл бұрын
6:57 Choosing an axis to rotate on. I dont have that bar thing up there how to get it?
@cg_cookie
@cg_cookie 5 жыл бұрын
Ah yeah the default changed to hid it. You can either enable Show Tool Settings in the View menu or find the same settings in the sidebar.
@Spekplant
@Spekplant Жыл бұрын
Seems like Blender 3.4 does not work with Face>Intersect (Boolean). It shows "No intersection found". Is using a modifier better?
@cinemanuggets24
@cinemanuggets24 5 жыл бұрын
There was a pipes joint addon in old versions of blender. It was later put in add mesh mechanical. Now blender 2.8 doesn't have mechanical section in the add menu. How can one find it if if they want to model pipes and gears?
@cinemanuggets24
@cinemanuggets24 5 жыл бұрын
I have seen the mechanical section by enabling add mesh:extra objects add on
@happytimelogan
@happytimelogan 4 жыл бұрын
This was exactly what I was looking for right now, thanks for this
@onlyonedk
@onlyonedk 3 жыл бұрын
good stuff man, thank you! please make more of these videos!
@skyvendik
@skyvendik 5 жыл бұрын
hello, pls when I applied curve to mesh as You, it does not create a mesh, only turns the original curve into edges, don't you know where is problem?
@eniocc
@eniocc 4 жыл бұрын
Perfect sir. Thank you so much.
@isaacmendezr
@isaacmendezr 3 жыл бұрын
Bro you're the best, thank you
@rolandrickphotography
@rolandrickphotography 5 жыл бұрын
😍 Man, this are really useful hints and it is a huge time saver, compared to fiddle it out myself. I am so glad, I found your KZbin channel!
@maheshaliasboya
@maheshaliasboya 2 жыл бұрын
how to make branches..like arteries in the body and roots of a plant. I am not able to do it effectively. can you pleaseeee help. I found one tool but its for cinema 4d. its called nitroveins. i want to do something like that in blender. thank you.
@TheSocket775
@TheSocket775 5 жыл бұрын
Nice video! You can fix the bevel issue of 5:30 with the "Percent" option tho!
@4KProductionsFilms
@4KProductionsFilms 3 жыл бұрын
I'm trying to intersect cut with 2 different size cylinders but I can't seem to crack it. Is that even possible?
@JRHainsworth
@JRHainsworth 4 жыл бұрын
How do you get blender to show the angle you're rotating at when you press r?
@jparmy6803
@jparmy6803 5 жыл бұрын
Pipe bends usually have a small internal radius, not sharp 90 degree corner
@backitdev
@backitdev 5 жыл бұрын
8:45 how do you snap to the highest point?
@mki6990
@mki6990 3 жыл бұрын
Im asking the same, did u find an answer?
@backitdev
@backitdev 3 жыл бұрын
@@mki6990 i don't even remember the problem, sorry it was more than a year ago, maybe 2 😀
@soffers2546
@soffers2546 5 жыл бұрын
Which is, command for Mesh Context Menu ?? 5:54
@thorstenebers2862
@thorstenebers2862 5 жыл бұрын
Could you not just boolean 2 tubes and a sphere and would get similiar results ?
@JoergWessels
@JoergWessels 5 жыл бұрын
Please show that in a video.
@TimKaminski
@TimKaminski 5 жыл бұрын
I learned so much from this tutorial!! Thanks for sharing!
@isekaiexpress9450
@isekaiexpress9450 5 жыл бұрын
Nice. I was chopping bagels in quarters and extruded them.
@christopherkurzak5187
@christopherkurzak5187 3 жыл бұрын
very helpful and thank you
@TataNog
@TataNog 5 жыл бұрын
is just me or someone else feels like the voice is speed up? great video
@A.R.C.Productions
@A.R.C.Productions 5 жыл бұрын
i put the playback speed to 1.5, its even faster. perfect.
@eugenc.3518
@eugenc.3518 3 жыл бұрын
Thank you so much!
@dimitardimitrov7950
@dimitardimitrov7950 4 жыл бұрын
thank you helped me so match
@thomasjoelcarter3257
@thomasjoelcarter3257 5 жыл бұрын
So i'm having a bit of a problem with the spin tool, have reinstalled blender from fresh several times and tried experimental builds but here goes; In the spin tool where there are selections for X Y & Z next to the steps select at the top left of the screen, i am not getting those options, i click spin tool, and it only allows me to spin on 1 axis, without the options even appearing for the other axis. Can anyone assist?
@thomasjoelcarter3257
@thomasjoelcarter3257 5 жыл бұрын
not 10 seconds after typing this did i discover it is in the menu when you type "N" in the 3d view and select the small "tool" tab. Keeping my foolish post up for posterity as it has changed from this old build.
@watchandproduce
@watchandproduce 4 жыл бұрын
I like that you show the challenges of building a good pipe. But when you want to learn something it can be a good thing to end the video with a clean example of “So let’s build a good pipe from scratch.” Otherwise the viewer is thinking: “But but how do I build the pipe while skipping the mistakes? Start with a curve, pull out one bit and the use shear?”
@TischHolz
@TischHolz 5 жыл бұрын
Thanks for saving my time
@frenzofficial4418
@frenzofficial4418 5 жыл бұрын
Oh my. Im switching to 2.80 today
@lawrencedoliveiro9104
@lawrencedoliveiro9104 5 жыл бұрын
6:06 Works in 2.79.x, too!
@talkingSkunk
@talkingSkunk 2 жыл бұрын
thank you
@ruslansayfullin6194
@ruslansayfullin6194 4 жыл бұрын
Thank you.
@psifis
@psifis 5 жыл бұрын
Thank you very much dear friend, it was very helpful
@Blaharator
@Blaharator 5 жыл бұрын
Hi, great video, how did you snap part of the pipe?
@jonlampel
@jonlampel 5 жыл бұрын
Hey, you can snap elements by setting the snapping type to vertex in the header, and then holding Ctrl when you move things.
@juregintergalactico2700
@juregintergalactico2700 3 жыл бұрын
thank you so much
@marth5503
@marth5503 4 жыл бұрын
Love how nothing every works like it doesn in tutorials
@alhdlakhfdqw
@alhdlakhfdqw 4 жыл бұрын
thank you very much great videos :)
@hotel_arcadia
@hotel_arcadia 3 жыл бұрын
Why did you censor "unfuse"?
@Gwathiell
@Gwathiell 5 жыл бұрын
The many ways demonstration is really cool, but I do miss the option to see what you are clicking XD Cannot find how to perform the blue fill or what to look it under. Still, thanks for this video, it's great. =o) Edit.. found it, it's filling a hole using F in edit mode :D and noooow it worked to spin.
@Recaduma
@Recaduma 5 жыл бұрын
Hey how do I choose the axis on which the spin tool work on? In the 2.8 release I don't have the menu on the top like they have in the video.
@EdKidgell
@EdKidgell 3 жыл бұрын
Pipe Joint addon?
@BOMBLATUR2
@BOMBLATUR2 5 жыл бұрын
Super useful, thank you
@DavidAllen_0
@DavidAllen_0 5 жыл бұрын
3:20 that bevel is still f*cked lol
@maxp7096
@maxp7096 4 жыл бұрын
Very usefull, many thanks =)
@antonvandehaterd1828
@antonvandehaterd1828 5 жыл бұрын
Nice you forget when using bridge loop tool to make a corner 90 degree pipe to set smooth with F6. For making a T bone use intersect knife tool and make a top loop. Pressing G twice lets you rotate a edge loop. First delete edge loops then add subdivision. There is also a pipe joint addon for blender 2.79. Thanks for the 2.8 tutorial but it can be done in 2 79
@mycg544
@mycg544 5 жыл бұрын
How to diagonal ?
@ayaz1979
@ayaz1979 5 жыл бұрын
very nice
@lucasskywalker
@lucasskywalker 5 жыл бұрын
Brilliant man. Thank you!
@sahil_0562
@sahil_0562 5 жыл бұрын
Thanks for this amazing content I learn lot things to your channel.
@Fxnarji
@Fxnarji 5 жыл бұрын
wich theme is this? good Vid aswell^^
@arielgimenez_95
@arielgimenez_95 5 жыл бұрын
THANKS!!!
@jefffsfff1783
@jefffsfff1783 5 жыл бұрын
That was cool.
@jgfjfgjfhjf
@jgfjfgjfhjf 2 жыл бұрын
YES
@Benn25
@Benn25 3 жыл бұрын
You can also go with simple vertices connected (no faces, just lines connecting vertices), then skin modifier. and subdivide.
@shrijank522
@shrijank522 5 жыл бұрын
Hi, Do you have the model in a git repository?
@jackepner9984
@jackepner9984 Жыл бұрын
Would help to better explain and include key strokes.
@azagwen
@azagwen 5 жыл бұрын
Alt+R > Remove doubles Done.
@tom_paul_3d
@tom_paul_3d 5 жыл бұрын
alt>R? isn't it W? Or has that changed in 2.8?
@azagwen
@azagwen 5 жыл бұрын
@@tom_paul_3dI'm talking about the roll tool, it has always been Alt+R, with default settings and controls
@tom_paul_3d
@tom_paul_3d 5 жыл бұрын
@@azagwen ooooh! I thought you meant the remove doubles specials menu, my bad, yeah, alt r is the spin tool
@azagwen
@azagwen 5 жыл бұрын
@@tom_paul_3d yeah, spin, always forget the exact names.
@ValeGoG
@ValeGoG 5 жыл бұрын
Спасибо, было круто :) Особенно классно что все показываться.
@masterbuilder7577
@masterbuilder7577 5 жыл бұрын
"move this over" wait what did you just do lmao, that was so fast I couldn't even see
@jamesgellert1263
@jamesgellert1263 3 жыл бұрын
Same.
6 Blender Hard-Surface Modeling Tricks I Wish I Knew Earlier
9:32
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
The FASTEST Cycles Renders you can get in Blender!
17:03
Kaizen
Рет қаралды 309 М.
Intersecting cylinders in Blender
4:54
Blender Bob
Рет қаралды 13 М.
The RIGHT way to cut holes in surfaces in Blender
10:52
Josh Gambrell
Рет қаралды 1,2 МЛН
6 key principles for 3D modeling
11:12
CG Cookie
Рет қаралды 1,1 МЛН
3D Models That Will END Your Career
11:29
chocofur
Рет қаралды 914 М.
Blender GIS
4:56
Nicko16
Рет қаралды 1,9 МЛН
How to make next-level procedural materials in Blender
27:48
Robin Squares
Рет қаралды 70 М.
Blender 3.2 Tutorial | Mechanical Rigging
11:20
MK Graphics
Рет қаралды 72 М.
Change Your Understanding of Topology In Six Minutes
6:58
DECODED
Рет қаралды 963 М.
Transfer HIGH POLY details to LOW POLY object in Blender
13:45
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН