Nice teaching, I'm planning this set up on a future WPL truck. I love the smooth travel of the out runner motors.
@MrYansonMRY2 жыл бұрын
Thanks for watching 👍 Outrunner brushless motor is indeed a very smooth platform for crawling
@obsidiannightwolfe13 Жыл бұрын
I'm also doing a wpl transmission and the hardest part was definitely trying to grind the motor shaft down to 2mm from 3.175 for the wpl pinion gear. I tried using a 12t 48p pinion for the 3.175 size and it was way too big even though the pitch and tooth count were allegedly the same.
@MastopRX3 жыл бұрын
Awesome idea my friend👏👏
@MrYansonMRY3 жыл бұрын
Thanks mate 👍
@willywijaya9736 Жыл бұрын
Friends, does the brussless dynamo have PNP on the mn86 gearbox at the bolt hole?
@MrYansonMRY Жыл бұрын
Yes, it is almost PNP. You just need to bore bigger bolt hole to mount the motor
@miningwayne9352 жыл бұрын
Great video mate...what pitch is the pinion gear...48p or 0.6m?
@MrYansonMRY2 жыл бұрын
Thanks 👍🏼 it's 48p pitch. Compatible with HSP pinions too
@R-EVLMNKY Жыл бұрын
Any proper information on the motor? Size, KV and etc… it helps not just showing what you did but also by giving more information of what you use. Thank you.
@MrYansonMRY Жыл бұрын
2830 motor size. 1000KV. ESC brushless 60amp
@R-EVLMNKY Жыл бұрын
@@MrYansonMRY thank you 👍
@MrYansonMRY Жыл бұрын
Thanks for your comment. Well, that's the beauty of this comment section for our interactions
@lisminircstudio9742 жыл бұрын
cool, look like the esc is good . i have the same motor
@MrYansonMRY2 жыл бұрын
Great!
@lisminircstudio9742 жыл бұрын
@@MrYansonMRY (๑`・ᴗ・´๑)
@RixxxiR3 жыл бұрын
Great work! What particular motor did you use? What's it's KV? Can you also show the minimum and maximum speed (in this case: are you running 2S or 3S)? Thank you!
@MrYansonMRY3 жыл бұрын
Thanks mate! 2300kv can size. 1000KV. I've uploaded one running video so far. More to come. Minimum speed is incredible. Lots of torque considering it's sensorless brushless. Almost no cogging. Maximum speed is unimpressive though. I'm fine with it since I just use it for trailing terrains. Currently use 3s 1500mAh 40c lipo
@@MrYansonMRY Thanks for your quick reply! I saw your running video, but am not sure if there is the min/max speed visible in the video. I want to install an outrunner in my MN86K too, together with an iFlight SucceX-E 45A ESC with "hacked" firmware that allows ultra low speed control. And I want it to be able to run rediculously slow :-) On the other hand I also like to be able to speed up rediculously fast ;-) I'm considering a Turnigy Aerodrive SK3 - 2836 - 2500kv from HobbyKing for this (hobbyking.com/en_us/turnigy-aerodrive-sk3-2836-2500kv-brushless-outrunner-motor.html). Any thoughts about if this might be a good option?
@MrYansonMRY3 жыл бұрын
Wowwww😍 Would love to see your set-up!!! Damn...that'd be the most epic MN86K on KZbin! Just proceed, mate. Sorry I don't have any experience in using airplane esc. It seems you'd handle it very well👍🏼
@RixxxiR3 жыл бұрын
@@MrYansonMRY It's not my idea or invention at all to use those quadcopter ESCs for crawlers. Here is a forum thread about it: www.rccrawler.com/forum/electronics/622544-silent-outrunner-esc-less-then-%2460.html
@AVRCgarage2 жыл бұрын
What esc you are using?
@MrYansonMRY2 жыл бұрын
Surpass 60a brushless esc
@F.E.A.R2 жыл бұрын
hello. please let me know motor size?
@MrYansonMRY2 жыл бұрын
Size is 28 x 28
@jackvivek53343 жыл бұрын
tht motor good for mn86 for climb sir?
@MrYansonMRY3 жыл бұрын
Yes. Worth the mod. If possible find smaller pinion for better low speed