Nicely done! Do you, by chance, have a unit that could replace a gas fireplace?
@FireplacexFireplaces3 ай бұрын
We have many products that could replace a gas fireplace! However the details of the installation are critical and important to understand before we can speak definitively about it. We recommend you speak with a dealer to find out which product would be right for you. www.fireplacex.com/where-to-buy/
@LongIslandsHardcoreDetectorist9 ай бұрын
Nicely designed
@tedk21668 ай бұрын
I would venture to say that less than 70% of those people burning firewood properly store and season it. When it’s cold people burn anything, which leads to catalytic chambers being ruined.
@robertm59699 ай бұрын
How do you control heat output and burn time?
@FireplacexFireplaces9 ай бұрын
Good question! There is a lever located on the front of the stoves called the air control lever. Depending on the model, it is either located on the left or in the middle. By manipulating this lever, (pushing in or pulling it out), you can control the burn rate to a very fine degree. You can experience it or discuss it further at your local dealer! www.fireplacex.com/where-to-buy/
@Ed-sh8jt9 ай бұрын
what is this model name and cost?
@FireplacexFireplaces9 ай бұрын
Nearly all of our wood burning fireplaces and fireplace inserts feature NexGen-Fyre™ or NexGen-Hybrid™ technology! NexGen refers to the secondary air tubes in the top of the firebox, while Hybrid refers to the presence of a catalytic combustor. Speak with your local dealer to find out more about this technology, as well as for pricing. You can find your nearest dealer by inputting your city, state, or zip code here www.fireplacex.com/where-to-buy/ Under the "Products" tab, you will find a list of all products including which have NexGen-Fyre™, or NexGen-Hybrid™ technology.
@itsfree879 ай бұрын
Is the only difference between NexGen-Hybrid and NexGen-Fyre the presence of a catalytic combustor in the hybrid version? Follow up question, would that make the NexGen-Hybrid better than NexGen-Fyre since they both have secondary air tubes in the top of the firebox/same technology but the hybrid has a catalytic combustor?
@FireplacexFireplaces9 ай бұрын
Yes, the only difference is the presence of the catalytic combustor. This brings benefits like lower emissions, higher efficiencies, and longer burn times over non-catalytic stoves. NexGen-Fyre units still provide the best non-catalytic burn available with a balanced fire and immense heat output, but the additional efficiency from the Hybrid units qualifies them for a 30% tax credit.
@itsfree879 ай бұрын
@@FireplacexFireplaces thank you for the reply! One more question - I am currently working with a dealer and originally was looking at the medium flush wood NexGen-Fyre but they sent me an estimate for the NexGen-Hybrid model. Is the hybrid model actually in production? The sales rep said Travis Industries will start making them at the end of NOV and ship them out late DEC.
@FireplacexFireplaces8 ай бұрын
That unit is currently in production. It may just be a case of stock availability for that particular area/dealer.
@viktorbrynza8 ай бұрын
@@FireplacexFireplaces when does the tax credit benefit end?
@FireplacexFireplaces8 ай бұрын
With the August 16, 2022, signing of the Inflation Reduction Act (IRA), high-efficiency biomass heating products once again qualify for a tax credit under Section 25(C) of the Internal Revenue Code (“IRC” or “tax code”). This new 30 percent tax credit - capped at $2,000 annually - is available for appliances installed between January 1, 2023, and December 31, 2032. The credit can be used on the purchase and installation costs of qualifying appliances. To be eligible for the tax credit, an appliance must have a thermal efficiency of at least 75 percent per the higher heating value (HHV) of the fuel.
@westvirginiasportsman74299 ай бұрын
Do you carry a zero clearance wood stove?
@FireplacexFireplaces9 ай бұрын
All of our wood burning appliances require some amount of clearance, so unfortunately no we do not. You are welcome to visit our website www.fireplacex.com or www.lopistoves.com for more information. Use the "Where To Buy" function on either website to get in touch with your local dealer if you wish to discuss your project over the phone or in person.
@westvirginiasportsman74298 ай бұрын
Other brands call it a zero clearance, although they require an inch and a half clearance around the stove. Do you sell anything like that? I would be building a frame for it to sit in.
@FireplacexFireplaces8 ай бұрын
I think you may be referring to what we call fireplace inserts, which are designed to fit into the opening of an existing metal (zero clearance) or masonry fireplace. We have a lineup of wood fireplace inserts you can find here: www.fireplacex.com/products/wood-inserts/ Our other brand, Lopi, has additional options: www.lopistoves.com/products/wood/wood-fireplace-inserts/premium-steel-wood-fireplace-inserts/ General specifications as well as installation specifications can be found under "Documents" on each product's page. Clearances are often listed, but not always. We recommend you speak with a dealer to help select a product that's right for you.