The Graflex Shop Gen2 Graflex Replica Review

[@willhamilton297]

Was always thinking these replicas were out of price range for me, but in my opinion $250 for a replica with this accuracy and full flash electronics, I was absolutely stunned. I’m definitely going to invest in a replica and some of the parts to make the ANH saber, if I can.

[@ctrif11]

Folmer

[@gotthewolfdogs9552]

Do you know if the blemished one come together or if you have to put it together

[@kevinmorrice]

my grandfather owned an original graflex flash since he used to be a professional photographer after the war, unfortunately i never got it after my nan -passed away, this is so similar i might get one just to have a memento, i love vintage cameras, and star wars, but mostly vintage cameras

[@c.a.k.comedy692]

Did you see the new wannawanga tfa/tlj accurate grips?

[@maxmodder]

Please recommend a blade, LED, and sound board kit that will work with this exact model.

[@justinmitchell2577]

They sell an FX kit, check in the accessories section, blade wise, you can got to the Custom Saber Shop, but they actually link to a blade in the the listing

[@MichaelDeRosa]

This is the video that finally convinced me to jump down the rabbit hole. My wallet curses you.

[@EastCoastSabers]

But you'll be very satisfied ;)

[@mikekuttruff9595]

Thank you for the review. Will the Makers Prop red button thread into the TGS gen 2?

[@EastCoastSabers]

Yes, but I don't think it will with the bulb socket assembly in place, since the internals of the MPS are not designed to be a functional switch. But rather used to activate a micro switch in a saber. But the threading should match.

[@b.h9186]

would u mind put the link to where u bought it , im strugling to find it

[@laurenhostetler208]

Hey man! Love your videos. Was wondering if you might be able to do a tutorial for wiring a Korbanth/89 Sabers Skinnyflex or Ultimate Works SlimFlex. Thanks a lot!

[@EastCoastSabers]

Sorry, I'm officially "retired" from sabers.

[@D4ni3lS4nk3]

Is it possible to install electronics?

[@ctrif11]

Im deciding whether i should stamp mine or keep it plain 😟 (haven’t ordered it yet) and did you get the deluxe 1 inch blade socket?

[@yrsued]

Well done Bro, getting mine soon!!

[@EastCoastSabers]

It will be well worth the wait.

[@yrsued]

East Coast Sabers soon, I think they’re shipping sometime very soon, I have a couple of Blems coming...

[@domenicd7443]

FIRST !!!!!!!, Great vid. thanks for your info and knowledge

[@AleksisDorsey]

How much does it weigh?

[@captain603]

How does this compare to the 89 sabers version

[@C.Bunjaj2003]

It’s a million times better in almost every aspect. The one downside is that it’s slightly harder to install

[@addmeons3701]

Hi there! Any chance you will make new install tutorial vids? Yours are the best I've seen and theres new tech out now!

[@CapitanTavish]

Kinda surprise you didn’t noticed the warping down around the button and eye glass bumb, you can see the light warping too

[@EastCoastSabers]

As mentioned in other replies, I didn't mention it because it's such a small imperfection (one that many vintages also share) that it is easy to not pick up on. I'm guessing you saw someone mention it in another video or one of the groups, they made it out to be a big deal and then you started looking for it. If you don't know it's there, chances are you will never see it. Or unless the light hits it just right. I own several Gen2's and I've worked on dozens and still can't see it unless I'm actually looking for it.

[@CapitanTavish]

East Coast Sabers Yea I cant unseen it anymore unfortunately ahah.. Thx for the explaining tho love ur videos ❤️

[@ZakRoks487]

This may seem like weird question, but whats the internal diameter of main/outter shell? I've been looking to make a saber using this kit, but I'm thinking of using some TCSS pieces and wanted to compare the measurements. Thanks to anyone who can answer!

[@cjackson127]

Any chance of doing a new set of build videos using this product?

[@EastCoastSabers]

Unfortunately, no. I don't have nearly the time nor money to put into a new series of that size. And with so many options out there for chassis, I wouldn't even know which one to do. The original series was easy because at the time there really was only one option for the 2.0

[@cjackson127]

@@EastCoastSabers Ok, Thank you for the response, I completely understand!

[@gibsonisthename]

If you can, could you do a review on the Graflex shop saber kit and how it’s different from all the other Graflex replicas

[@EastCoastSabers]

The "Saber kit" from TGS is basically a scratch and dent version of their original Gen1 flash, though most people have a hard time finding any blemishes. See my review of their Gen1 for details. The saber kit however features a better finish thanks to better plating, as well as accurate dull finishes on the beer tab and slide switch plate. The Saber Kit also comes with 1" blade holder and appropriate sync pins + tabs and thumbscrews. The new flash replica (Gen2) is an empty flash with the option for full replica internals. It also has more accurate stamping on both the clamp and the end cap.

[@gibsonisthename]

East Coast Sabers thanks for the info!

[@EastCoastSabers]

No problem, man.

[@lucasgallant2380]

are u making ur voice deeper

[@DVDRAR]

a beautiful camera flash, bought a genuine one from a flea market, only 15 bucks

[@Zeaiclies]

No offense to Roman but the TGS V2 and Maker Prop studios Graflex are number one but just marginally lol. But it is nice that we have four high quality replica Graflex and choices. Roman is still king of the Obi-Wan Anh and ROTS.

[@mexicanakinskywalker6762]

how does this compare to romans gen 2.0?

[@Zeaiclies]

The Roman's is very good but it has had some plating issues. It just depends on what you want and if you want a perfect replica of a somewhat not so perfect because you want a weathered and beat up look for your prop. Not a dig or dis against Roman at all. His is a great replica Graflex.

[@gibsonisthename]

how do you get your bunny ears to stop moving?

[@EastCoastSabers]

Before installing the ears, take a pair of toothless needle nose pliers and VERY slightly bend the two tabs in towards each other. Then install the bunny ears. This will put extra friction on the ears and keep them a bit stiffer and stop them from rattling, while still allowing them to move.

[@legocoolmanproductions5591]

How much are these

[@Zeaiclies]

I think right now the full functionality flash is $225 but might go up to $250 but goto www.thegraflexshop.com and check

[@nelxonmiranda]

So you don’t really put this on a camera?

[@EastCoastSabers]

You can if you want to. If you buy the flash with replica internals they are fully functioning and are fully compatible with vintage Graflex cameras. Personally, no. I use them to make lightsabers.

[@Tatsumaki7]

Are you still on Facebook? How can I contact you

[@EastCoastSabers]

Sorry, I'm "retired" from the saber hobby.

[@Tatsumaki7]

@@EastCoastSabers temp or for good? Can you still make recommendations or point out parts?

[@ineedcbsi]

got one. probably a change in times since your review. disappointing and not like you got. it was easy to return though.

[@EastCoastSabers]

They are currently sold out of their Gen2 replicas, which is reviewed here. You most likely purchased one of their blemished kits or a "1.9" which is a mashup of old Gen1 parts and Grade B new parts.

[@jarisipilainen3875]

5:46 omg bunny ear are 180 off.its fine you can take it part and turn 180 lol. who cares. thats what rey did when fix luke saber LOL

[@ctrif11]

Folmer? Or non folmer