THE HIDDEN SECRET TO BUILDING WOODEN SIDES FOR YOUR TRAILER OR TRUCK

JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum!
Learn About The Program Here: • I’m Launching A PROJEC...
Join The Project Support Group Here: / membership
SOME OF MY FAVORITE TOOLS:
KNIPEX German Made Pliers-Wrench:
amzn.to/35fchvN
OTC Slide-Hammer Kit:
amzn.to/3p7mq4Q
Carbide Burrs - An Affordable Set That’ll Last:
amzn.to/2VsxTgH
SUNGLASSES I WEAR - Quality at twice the price:
amzn.to/2VegmbE
Regular Safety Glasses that I Use:
amzn.to/2ATXtEf
Yes, these are affiliate links. Thanks for watching!!

[@officialweldingfarmingarch2041]

JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum! Learn About The Program Here: kzbin.info/www/bejne/gpPbqY1qoZ5_pLc Join The Project Support Group Here: www.patreon.com/OWFA/membership

[@brucemoore2163]

Used motor oil would make it look just about the same and more than likely have more protection

[@alexbull5838]

Will it have an oily surface?

[@brucemoore2163]

No

[@Whalermansteve84]

What happened to your chuckE2009 channel ? I’ve been waiting forever for a new video lol

[@scottanddebranelson8419]

nice touch with bolts instead wood screws. i woulda stained the portion of the 2x4 in the pockets as well as the bottom of the 12s before you installed them. and you shoulda scorched the end grain with your torch cause those two places are were you will likely have issues first. we also do it for fence posts it really extends the life of your wood.

[@zdeany88]

Just take a torch everywhere u have a cut? Scorch it for how long

[@Rio97621]

Never heard of that. Will try.

[@noahriding5780]

What do you do if the flatbed trailer you are adding sides to doesn't have those little stake post slots already built onto the frame? And can they go after you some how if you convert like a motorcycle flatbed trailer into a flatbed trailer? Thanks.

[@mechanicalliteracyproject2508]

I don't know the laws in your state, but a homebuilt trailer should be OK. You can get stake pockets to weld on or have a shop/welding class/friend with a welder add them.

[@aholejoe5594]

Use bolts rather than screws.

[@shortimr]

Background music?

[@chrisduncan7572]

Please tell me where that background music came from? That is very catchy!

[@stretchmfe4913]

Sounded a little bit like Du Hast from Rammstein.

[@johndeninger8905]

have a good day chuck

[@J_prath]

You should make a video about that Kubota. Also is your truck a 1/2 or 3/4?

[@theidahooutlaw]

It is clearly visible that the truck is a Ford Super Duty. So it’s a 3/4 or more.

[@andybacon8309]

This is a waste of time.

[@theidahooutlaw]

Explain how.

[@thomaschambers5711]

The 2x4 that fit upright into the slots. How did you get them to stay in there before bolting the boards to it? Looks like they were floating

[@-murphyslaw-1786]

I’ve been wondering the same thing looks like they’re held by the weight of the walls

[@thomaschambers5711]

@@-murphyslaw-1786 We ended up putting full length 2x4’s in and cut them after we bolted in the sides. Actually tacked the side boards with a nail gun first and worked great. Wasted some 2x4 material but didn’t really add up to that much money

[@KenV]

You could tap shims inside the pockets and yank em after the bolts are in. The composite shims are nice for this since they don't splinter and can be left in place to firm up the assembly, as they won't rot.

[@mechanicalliteracyproject2508]

Run a deck screw to hold them. After it's bolted together remove the deck screws.

[@chines72]

Wood stain = used motor oil

[@Travis2L]

We run businesses here. That’s a hard pass!

[@carbonhazard]

I thought this said "the hidden secret to building wooden doors"

[@willhorting5317]

I admit that I am curious as to why the top of the front board isn't even with the tops of the side boards.🤷‍♂️🤷‍♂️ And, after watching the entire video, I am still waiting for the so-called "hidden secret" to making sideboards for a trailer.😂😂

[@yzrider3101]

I think He got scammed on the secret lol

[@officialweldingfarmingarch2041]

its shorter to guide the roll up tarp down the middle of the trailer. good question.

[@willhorting5317]

@@officialweldingfarmingarch2041 ah, I see.