Same mate. I’ve never had a gen 3. I had a gen 4 for a little while. A gen 1 turbo diesel shorty that i regret selling and 13 gen 2’s!!!!!
@DuckDonald443 жыл бұрын
@@PERTHSCOOTER07 that's a heck of a lot of 2s!
@belka44023 жыл бұрын
Gen 2.. 2.8.. Juste like mine 🤩🤩
@jweis53203 жыл бұрын
Un gran carro, saludos desde Costa Rica 🇨🇷
@magnumllama4002 жыл бұрын
@@PERTHSCOOTER07 lots of experience I see. You got to compare a gen 3 3.2 did too
@Ifindoubtknockthemout2 жыл бұрын
Thinking of getting on and trading off the gen1
@GregGoldie-p6g2 ай бұрын
Still enjoying my 3.5 nl auto after 19 yrs, 476000 on the clock, valve seals once, the 6g74 is a great engine if maintained correctly, everything else is original, still lovin my paj.
@PERTHSCOOTER072 ай бұрын
@@GregGoldie-p6g my current white 3.5 auto has just started smoking a bit (valve stem seals) it’s done 502,000kms and I’ll refresh the motor early next year.
@MothyEmms2 жыл бұрын
So good 👌 getting an NL with the 3.5 V6 banger soon
@PERTHSCOOTER072 жыл бұрын
You won’t be disappointed.
@knoblis2 ай бұрын
Hi! Did you change anything else on the rear suspension besides the longer stroke shock and bigger springs? Different radius arms or suspension link setup?
@PERTHSCOOTER072 ай бұрын
@@knoblis only thing I did was remove the rear seat bar, and notch out the trailing arms where the shocks sit because they would bind up at full flex and eventually damage the shock tube
@belka44023 жыл бұрын
They are so underrated..
@claireingham63933 жыл бұрын
Goes Hard!
@ryanborg31193 жыл бұрын
Do you have any lockers ? Looks sick 💪🏻
@PERTHSCOOTER073 жыл бұрын
Factory rear mate.
@troycaruana13133 жыл бұрын
@@PERTHSCOOTER07 was going to ask the same question. I got one the same but with open diff. So i need to install a rear diff lock. Not sure if i will find a factory diff, Tre4x4 or ARB. Great video btw! :)
@taibrookes73742 жыл бұрын
Do all pajeros make that loud clanking noise when flexing, on the rear axle? If so why is that? Thanks 👍
@PERTHSCOOTER072 жыл бұрын
All mine have. I think it’s the springs moving in their locating plates.
@taibrookes73742 жыл бұрын
@@PERTHSCOOTER07 thanks for the reply, always thought it was a bit strange as other fourbies don't tend to do it, cheers👍
@cancer_stixx3 жыл бұрын
What's your front suspension setup? Just reindexed torsions or have you also done balljoint flip/spacers? Also do you run longer shocks? Anything added or extended in the rear to deal with the extra flex?
@PERTHSCOOTER073 жыл бұрын
In the front I run aftermarket shocks. But not longer. I’ve fully removed the upper droop stops also. On the rear I’m running 4” longer shocks and have had to extend diff breather and brake hose
@curtisdubuissonperrine73182 жыл бұрын
Hey man did you do the injector pump before you sold it or sold it leaking? Not sure if cracked or not but has Wald puddy all on the bottom
@PERTHSCOOTER072 жыл бұрын
Lol. The weld putty is not me. The car had a starting problem. I rebuilt the pump using all the best parts from 2 pumps and it wasn’t leaking when I sold it.
@curtisdubuissonperrine73182 жыл бұрын
@@PERTHSCOOTER07 sweet as how long ago was that? Stop looking for new pumps then and more find out why the weld is there must seals
@PERTHSCOOTER072 жыл бұрын
@@curtisdubuissonperrine7318 was only a couple of months ago. Remove the putty and clean it all down then hopefully pinpoint where it’s leaking from.
@tooheysnew112 жыл бұрын
Was anything done to the motor mate? Or just a bigger exhaust?
@PERTHSCOOTER072 жыл бұрын
Just the exhaust. I was looking at getting a bigger turbo and intercooler but have since sold the car
@tooheysnew112 жыл бұрын
@@PERTHSCOOTER07 Awesome, Im in the process of purchasing my very first Gen 2, 2.8 Diesel. Im looking forward to It. Keep up the good uploads mate!
@agentprotsko19742 жыл бұрын
Are you cutting the wheel arch for instaling 35" tires?
@PERTHSCOOTER072 жыл бұрын
No need if using -22 offset wheels
@bushmaster95762 жыл бұрын
Hey man I have questions for you does it burn oil? And are the nl’s reliable for long journeys and do they keep up with the land cruisers and patrols
@PERTHSCOOTER072 жыл бұрын
This thing didn’t leak or burn a drop. They are reliable for long journeys if the cooling system is in top condition. That’s the weak point of the 2.8L they don’t produce as much power as the Patrols and Cruisers but with a bit of work they go really well.
@bushmaster95762 жыл бұрын
@@PERTHSCOOTER07 thank you subbed
@paladinjosh82722 жыл бұрын
Pretty out of context mate but would u know if the Pajeros nm - nw have the or similar exhaust turbi back? Currently looking for my nm but just can't find
@PERTHSCOOTER072 жыл бұрын
I’m not sure. They would have to be very similar. I know the NW has a cat post turbo. Not sure if the NM does. What do you need exactly? Have you looked into aftermarket?
@paladinjosh82722 жыл бұрын
@@PERTHSCOOTER07 as far as I know the nw - nx have dpf but routing wise of the exhaust I was hoping you'd know. Mine is a 4m40 aswell NM there are few 3.2 np onwards just not sure if they're fitting
@paladinjosh82722 жыл бұрын
@@PERTHSCOOTER07 and I am current in looking for stock exhaust as mine is rusted off and I just copped a yellow..
@PERTHSCOOTER072 жыл бұрын
@@paladinjosh8272 NS auto and early NT auto had dpf. Manual versions didn’t. No NW had a dpf. Early NX didn’t but it was reintroduced on NX model
@MynameisGeoff823 жыл бұрын
4m40 powwwarr 😂💪🏻
@welk0metohell2 жыл бұрын
Where did you get the rock sliders / side protectors from? Are those ARB?
@PERTHSCOOTER072 жыл бұрын
No company makes off the shelf rock sliders for gen 2. These are custom built.
@subieventure_oz53162 жыл бұрын
How's your 4m40 going mate? Thinking about getting myself a diesel paj. Does she cope well?
@PERTHSCOOTER072 жыл бұрын
It was going well. Then the diesel pump failed. I’ve just fitted a new one and am in the process of fixing a few things up. Prior to that it was going mint. They’re a great car
@chrissuntay47833 жыл бұрын
Are you using balljoint spacers?
@PERTHSCOOTER073 жыл бұрын
Not on this one. I did on my old swb gen 2. On this one I’ve fully removed the upper stoop stops
@olegkreydich4563 жыл бұрын
Nice rig! Body lift? What suspension?
@PERTHSCOOTER073 жыл бұрын
It’s got 1” Luxlifts body lift and GU Patrol tow pack springs which give 3” lift.
@LucidSnapshots2 жыл бұрын
@@PERTHSCOOTER07 The tow pack springs give more fo a lift? would the normal GU patroll springs do a 2 inch or ?
@PERTHSCOOTER072 жыл бұрын
@@LucidSnapshots GQ ones give around 2” and GU around 2.5”
@agentprotsko19742 жыл бұрын
What gear ratio in axles?
@PERTHSCOOTER072 жыл бұрын
4.9:1
@agentprotsko19742 жыл бұрын
@@PERTHSCOOTER07does 5th gear come on on the highway?
@PERTHSCOOTER072 жыл бұрын
@@agentprotsko1974 4.9 is the factory ratio for this car and works ok with 35” tyres so highway is not a problem
@rohancavey47193 жыл бұрын
What size tyres you running man
@PERTHSCOOTER073 жыл бұрын
Hi mate. Theses are Simex Centipedes. 35/10.5R16
@GuurglGuurgl3 жыл бұрын
is it solid axle coils?
@PERTHSCOOTER073 жыл бұрын
Independent front and solid axle rear on coils
@leebarrass.2 жыл бұрын
Did you sell this?
@PERTHSCOOTER072 жыл бұрын
I did. It’s currently for sale with the current owner
@curtisdubuissonperrine73182 жыл бұрын
What did you sell it for and why?
@PERTHSCOOTER072 жыл бұрын
@@curtisdubuissonperrine7318 I recently bought back my white NL that I travelled round Aus in and didn’t need 2. The white one has sentimental value so the Hippo had to go
@curtisdubuissonperrine73182 жыл бұрын
I just bought the hippo for a camping and touring 4wd for me and the family does have leaking injector pump is there anything you recommend fixing or need doing as obviously the new owner after you didn't have it long? Sorry I know it's not you problem just came across your videos while trying to learn more about the pajero's
@PERTHSCOOTER072 жыл бұрын
@@curtisdubuissonperrine7318 omg. That’s awesome. The owner asked me about the leak. The way he described it it sounded like it could be from one of the injector pipe unions.
@Edu04rd Жыл бұрын
kzbin.info/www/bejne/o2anqXuuq9-BnLcsi=5ZVZ8_ydbCN0F3wd Aqui a criança chora, e a mãe não vê 😂