The Idea A Plumber Told Me To Join A Hose To A PVC Pipe Without Buying An Adapter

The Idea A Plumber Told Me To Join A Hose To A PVC Pipe Without Buying An Adapter
#plumber
#pipeline
#plumber
#pvc
#Water
#plumbing
#plumbing
#pipe
#plumbing
#plumbing
#tubodepvc
#works
#workfromhome
#carpentry

[@RodCalidge]

Wow, and you only made that 12 times harder than it had to be.

[@abolomopeolasunkanmi99olas65]

😂

[@Mrinventor93]

Nothing is difficult, how would you do it if you didn't have an adapter and you didn't have an accessory store nearby?

[@wrongfullyaccused7139]

@@Mrinventor93 : Actually, I do things very differently. I plan ahead for things to fail or go wrong and always have adequate supplies already on hand so I never have to worry about finding a store.

[@equisequis.55]

exactly. It probably took him all saturday morning to do it.

[@Mrinventor93]

That's very good, but when you're not a plumber and you don't have the supplies@@wrongfullyaccused7139

[@larryvaughan5163]

By the time I have bought all the different sizes of pipe and the hose clamp It would be cheaper and quicker to just buy an adapter

[@lostcause1206]

After inserting pipe , you should give a half turn , while seating it , to prevent air bubbles

[@JamesHarris-]

The adapters would be easier and cheaper and faster if you don't have the heat gun. :-)

[@davidallred2947]

Thanks for making sure that we knew to plug in the heat gun. I would have taken so much longer.

[@serviciodeplomeriacartagena]

El asegura que somos estúpido

[@TheGreatGig73]

🤣

[@edmonblocker3465]

One adaptor would be easier and much less work.....

[@Mrinventor93]

Yeah, that would be the best idea, but this might help if you don't have the adapter at the moment mate.

[@marioalbertoruizdiaz9313]

0

[@bigmacdaddy1234]

The entire point of the video is to do it without an adapter. Did you somehow miss that???

[@MrPLC999]

And then you could use a stock garden hose with a standard connector.

[@jairofandi5047]

​@@Mrinventor93 😊😊q😊

[@eriksteffe]

You went to the store to buy the piping and the metal ring. Just buy the right part.

[@davem145mxr]

There’s no way a plumber would do this

[@Mrinventor93]

Of course, there are plenty out there, who do.

[@equisequis.55]

i agree, and why

[@diracflux]

A plumber would do it correctly.

[@Mrinventor93]

A plumber yes, but a person without knowledge and who is far from a supply store! This could be useful or not!@@diracflux

[@pgeetrof528]

A plumber would also do it up to code for the location they are working in. An inspector would not approve this.

[@RockymountainRobert]

It's not good to stretch the end of the garden hose, it will eventually bust there, leak water.

[@benjaminharlow3743]

A simple adapter would be much more sensible

[@Mrinventor93]

Yes, of course, but I didn't have it at that time, friend.

[@stiven7884]

​@@Mrinventor93какой клей вы используете?

[@WildlifeWarrior-cr1kk]

Did you not hear what the title said

[@kenysosa]

Me parece una buena idea para todos los quejumbrosos y criticones, siempre es bueno saber que las cosas se pueden hacer de diferentes modos usando lo que tienes a la mano. A veces hay quienes no tienen una cosa pero si otra. Además la pistola de calor no es un obstáculo ya que se puede hscer con la estufa o periódico. Un aplauso para aquellos que abren su mente a nuevas ideas.

[@brentbennett8577]

lol a plumber? Could he repipe my house when he has time? I have a lot of faith in these abilities

[@davetuscano5939]

Good job! Now u need an internal swivel chamfering tool. We used them in the shop on steel, aluminum, plastic.

[@Mrinventor93]

Thanks I will take that into account

[@shakila6]

Super well done

[@grahaigh]

When the shortcut is three times further than the way.

[@user-su5sw9lq4s]

JOKE OF THE YEAR

[@centscents]

It shows a different solution to do connection. There may be some times that we need this method. But if it is possible, an adapter may be an easier solution. Nice thinking though.

[@radicalrick9587]

*Everybody loves the Rube Goldberg method. What else are we going to do with all our free time.*

[@jondavis2206]

Wow, that’s amazing

[@aaabbb8777]

Nessity is mother of all invention.

[@krasnonosov51]

Прекрасное сопряжение! Любая труба должна соединяться с любой другой трубой, в этом принцип универсализма!

[@chrisgriffith1573]

LOL, I'd have been back from the store , put the new adapter on, and left for break before you finished that job by lunch!

[@josephbarrett9563]

I recommend a trip to the hardware store.

[@JoseluisJuarezmoreno-ef6rq]

Excelente ! Asi lo hago

[@Mrinventor93]

Gracias José

[@LiuDienNuoc2024]

1:40 I really like your invention

[@user-kk7wu1lc3w]

Зачем делать из мухи слона? Все штуцера продаются-стоят копейки.😅

[@bobbobisa7776]

Для видюхи

[@krasnonosov51]

А если в магазин надо ехать два часа? Нужно уметь находить выход в любой ситуации!

[@sergvolostnov839]

Пипец, мне в магазин съездить, надо убить минимум два часа на дорогу, плюс поиск и очередь в кассу, да и вдобавок бензин.

[@krasnonosov51]

@@sergvolostnov839 , я подозреваю, что этот чел. (Роман Гречихин), что в магазин предлагает съездить - в этом магазине и работает, ВОТ И РЕКЛАМИРУЕТ СВОЁ ГОВНО...

[@abolomopeolasunkanmi99olas65]

😂😅

[@juanmontero8318]

Excelente video. Muy práctica la solución. Sí es bueno añadir las medidas de las circunferencias de los tubos, para los que no las concen. Saludos y gracias‼️

[@Mrinventor93]

Gracias por comentar, saludos cordiales!

[@howieduin915]

Your plumber is still laughing at you.

[@JonMotivationalRend]

jeez, just buy an adapter LOL

[@dj1642dj]

Mais fácil comprar uma conexão adequada. Mais rápido, tempo é dinheiro

[@krasnonosov51]

А если магазин далеко, и сделать нужно срочно? Поедешь, купишь, а воду выключат...

[@neiltitmus9744]

The bit at the end was the best where you just put everything down

[@Mrinventor93]

thanks

[@INTERNA9]

WOW!

[@LACHACRITASUCULENTA]

El plomero hizo hora contigo , así como tu conmigo.. 😅

[@hlambourne3847]

Just buy an adapter, cheaper than hiring a heat gun, buying adhesive and jubilee clip

[@Mrinventor93]

Thanks

[@user-rw4qh3pl5e]

Спасибо большое! Поеду в магазин за феном или просто куплю переходник с трубы на шланг. Не знаю что дешевле

[@krasnonosov51]

У человека, как разумного вида, не должно быть технологических преград. А вдруг все магазины обанкротятся? Парень ни на кого не надеется, но делает всё сам, у него нет ничего невозможного!

[@PappyNet01]

Whoa! I thought plumbing apparatus was inside the house, but you illustrated washing a car?

[@yombak]

Muy buen trabajo

[@Mrinventor93]

Muchas gracias Herminio, saludos cordiales!

[@josephbreda3330]

All that to save a couple of dollars 😂😂😂😂

[@a-verybasic2]

You can buy adaptors for that.

[@ernestcashion4462]

Dear lord, 58 steps to avoid a 59 cent adapter.

[@peterbarlow8912]

Where’s the code required colored PVC primer? Who uses hoses with no ends? Looks like a job for a PVC 3/4” female adapter, a brass hose adapter, and a proper garden hose.

[@memes_tv_xdyt3693]

excelente idea, solo me pregunto si es cpvc

[@Mrinventor93]

Gracias, el que se uso para hacer el adaptador es cpvc y el que ya estaba es pvc

[@stickboy9475]

That is a lot of effort, and why the saw instead of a cutter?

[@aribarak]

Excelente manera de hacer lo innecesario.

[@krasnonosov51]

Почему ненужное? Парень показал, как это работает, поливал водой из шланга...

[@davidcarlen8363]

I've done this for forty years

[@angelgarcia5481]

como sellaman las cosas para apretar?

[@Montauk-gy2uy]

Afro engineering at its finest

[@incognito8894]

esa rolita la usa Memollemo DV AV en sus videos bro✌

[@josearteaga3992]

Este tipo inventó el agua tibia. Jajaja 😃

[@babaolowo35]

THANKS

[@Agrofind6161]

Simple but highly effective😊

[@Mrinventor93]

Thanks

[@rafaelmarianoquinonez2694]

Estoy de acuerdo,mucho trabajo innesesario

[@JoseluisJuarezmoreno-ef6rq]

Queda mas reforzada la instalacion por ser material fragil

[@JohnDoe-gp5sd]

Pues es bueno saberlo si estás en la nada y te faltaron piezas pero muy práctico como que no

[@johnnerding8551]

Yuan !!!!

[@yashiro880]

caliento la manguera verde y intrdusco el tubo de media a una buena distqancia y coloco la abrazadera si no tengo adaptado y la otra punta del tubo caliento y moldeo con la pistola de calor y hago un pequeño giro para evitar que entre aire o fugue luego ligo agrego pegamento pvc y uno y si tengo la abrazadera la coloco para mejor union y listo termine man

[@evgenynekozyrev9902]

Пипец он заморочился🤣🤣🤣

[@fritolay1427]

A lot easier to just go by the adapter.

[@user-qc5iq9gu1p]

I thought it was a good idea

[@nandakumarcheiro]

The plumber lifted the old water tank lifted it and made the leak incurred heavy expenditure. Don't do it. Without lifting it renew the out going pipe along with delivery valve.

[@ahmedbusati209]

You needn't have gone all long this journey to join the hose to the pvc pipe, a direct joining with little pre - modification; enlarging opening of the pvc pipe, then insert the piece of the hose into the pvc pipe 😔.

[@bshaboogie]

I'm just buying the adapter.....

[@kenshin3468]

your content always on.plastic, can you upload about how to connext with metal faucet?

[@juangabrielgonzalezm]

Está bien la idea, pero como para trabajos muy económicos. Como bien sabemos ya existen una gran cantidad de adaptadores de todos colores y tamaños y económicos, mas fácil, en menos tiempo.

[@user-sl2ez2cu1d]

👍🏻👍🏻👍🏻

[@patrickallen5781]

Just buy the adaptor.

[@mucana_art]

Nice Videos ideas 😍

[@Mrinventor93]

thank you my friend

[@mucana_art]

@@Mrinventor93 thanks my friend 😘😆

[@CRSolarice]

I actually lost intelligence by watching your video. (Nice heat gun work though, I can tell you practiced).

[@CRSolarice]

...and the music has permanently repelled me.

[@Mrinventor93]

Thank you very much friend, good day

[@juandominguez9263]

Como se llama esa erramienta...disculpen mi ignorancia...grasias

[@rodrya.j7953]

Wow que gran idea me gusto

[@Mrinventor93]

Me alegro, gracias rodry

[@bobbywyatt4355]

So what size was original pipe?

[@joesedlacek7552]

Just buy the adapter!

[@hugovasquez6463]

Nomás una reducción para manguera y ya !

[@waltermojica2972]

Qué trabajoso vienen piensas para eso . Eso es de 3/4 a 1/2 ? 🤔😱

[@nivek367]

Una idea mil veces mas complejas, es como intentar innovar con una rueda cuadrada

[@marioalbertocastillobalcaz2258]

Desde el segundo paso hubieras puesto la manguera

[@Mudder1310]

No plumber told you this. You just added time, effort, and cost to a simple project.

[@Mrinventor93]

A simple project yes, but tell me how you would do it if you need to connect and you don't have an adapter and you live very far from the city!

[@edgarguevaraavila]

El día que se quiebre la llave paso, a las 3 de la mañana, hay me cuentan como rompieron el cemento para cambiarla 😮😮😮

[@keithparlour2686]

And what if we haven't got any spare pipes lying around?

[@sedric72]

Perfect!

[@Mrinventor93]

Thanks

[@TheMNB]

so you spend a time and materials making an adaptor...

[@user-jn2ge4fb1e]

мда, шедевр

[@user-pl9vr1pp9h]

Легче было переход припаять,чем все эти комбинации.

[@porsheN.]

... из сериала "мы не ищем легких путей"...

[@user-sf9ck9yx2f]

10 minutes work, first tug on the hose snap ,20 more minutes 🤔

[@chargrams9906]

WHY NOT USE THE CORRECT FITTINGS?

[@Don_HuanRUS]

а зачем кусочки разных труб? нельзя было сразу шланг на хомут одеть?)

[@sergvolostnov839]

При большом давлении будет однозначно сползать.

[@eduardogevara8834]

Es lo mismo que los conectores que rechazó,,, creí que sería mas manual... la conexión de manguera y ampliación de la boca, es de industriales, no de un neófito arreglando en su casa, como quiere parecer esto. Hay que tener una serie de herramientas como el aparato que da calor, las brocas que agrandan las bocas, etc. La mayoría de los productos de PVC son difíciles de calentar y agrandar las bocas, porque son duros y se enfrían antes que podamos levantar la mano. Y si trabaja con los fáciles, son pan para hoy, hambre para mañana. No sirve.

[@sherylflowers6062]

Now you have a week hose because you heated it up although not shown so come summer it will burst cus the hose is week.

[@user-eu2cg6sh1n]

😂😂😂😂😂😂 ну так то конечно намного проще ёпта

[@joonescobar6195]

I supposed the hose was also heated since it sees there that its edges is quite swollen....?!

[@Mrinventor93]

the hose was not heated, it was just positioned so that it was the width of the tube.

[@alejandrohernandez-xp1tq]

tanta jalada para conectar esa manguera 😂

[@user-by2zs4uj3i]

Зелёный шланг дермо

[@buffalobillr.6156]

Puro trabajo extra😂😂

[@arcadiaoutlaw]

PVC hose adapter

[@mrzorg]

A whole lot of mismeasurements going on here ffs.

[@cynthiaherrera4633]

Hubiera sido mas práctico ponerle una llave.

[@gdawg6543]

An adapter wouldn't reduce the water flow by practically 1/2 of the flow rate, plus the vortices of turbulence. All that time and effort to do it wrong.

[@giovannydiazgomez176]

A veces complican mas las soluciones de normal

[@rick-ps5ct]

I surly wouldn't trust that for inside plumbing, and I'd be sure to turn water off outside if I wasn't right there to watch it

[@WildlifeWarrior-cr1kk]

That hose is going to break