The Jeep FC Leaves the Shop for the FIRST Time!

[@bleepinjeep]

In this video its time to wrap up what we are doing and get this FB build out of the shop and over to Ian's from Big Tire Garage! Discount on Adams Driveshaft: bleepinjeep.com/member-discounts/ Enter to win the FC: Bleepinjeep.com/giveaway Yoke Tool: bleepinjeep.com/product/yoke-wrench-tool/

[@jimforsyth2.]

That transmission is junk .

[@omarrosado2481]

Dude, I wish you have posted this video before, I just trashed a set of LJ Springs

[@MKB_Racing]

Im driving west on i70 look over at east bound traffic and lo and behold its the comancheep on a car hauler

[@GDLutz]

I like the short overhang of the TJ tub! Gives a great departure angle!

[@TheBonecaya]

Suggestion for the bed--- use the tub you have on the forward part of the bed, to get the shape wanted. fill the wheel wells so they're like a bedside. Get the other tub with the longer tail section for the rear part of the bed.

[@mathewkorn5008]

It was good to see you and Matt’s off-road and recovery workin moab together! Corvair is Cool although i didn’t think so when they started......daring to be different worked for them

[@boldrbangr9834]

Love your bed idea. Agree it needs rounded corners. This thing is sick. Thanks 😜

[@Bleepincolt]

We gotta get this thing done so someone can enjoy it!!!

[@darkfireBikes]

I'd say keep the frame like it is and use the bumper support as a base to make a bumper around

[@ameyers67]

Love it Matt. Good luck with your awesome new winch rope. I hope you make millions!

[@jaredrevard2885]

I bought that yoke tool from you about a year ago used it about 6 times now and it is the best thing to have torqueing that nut down super helpful to have around! Thanks for makin it for us.

[@allinmota4787]

Most impressive Matt, best fabricator on the intrawebs!

[@vgullotta]

Love the TJ bed on that FJ, it's going to be so sick when it's done, can't wait!!!

[@jbrunsonjr]

Just don't forget the bottle opener! Looks great as always - Let me know when you're ready for another set of hands!

[@jbrunsonjr]

Oh, and it needs a CJ tailgate....you know....so you can tailgate with it.

[@shark180]

I am so impressed with this build Matt, that I'm not even sure what words to use to express it.

[@DRTJon]

Try: “bleepin [adjective]” 🤣

[@gunsandgears4218]

Love watching this thing get closer and closer to finished. Keep pushing bleepin then pick me to win please!!!!

[@Gantzz321]

IMO this needs a cube van box put on it. Would make a perfect getaway rig. Everyone is putting tents on jeeps, with a van box you could put a kitchen and bed and storage, everything for an off-road week-long trip all in one.

[@swarbrickjesse]

Great to see the FC is coming along! Quick Question: Jeremy ok? Miss him!

[@lostmancampground]

Whoever gets this bad-jackson better have it out at Moab EJS 2022 That perspective from the back really brings your concept all together. I think the TJ rear will make for a sick custom bed

[@bleepinjeep]

its gonna be awesome!

[@Skiridr22]

I see where you’re going and it’s going to look great.

[@tommyhammel]

I’d chop the frame and use the to tub. Better departure angle. Maybe use a inboard fuel cell too

[@yamahaguil]

I just rewatch an old video of the zombie jeep and Math still rocking the same old winter jacket lol 🤙

[@GSWolfwood]

The Jeep build is looking great so far. Can't wait to see when it's finished!

[@carlstanoyevic3070]

It is going to be so cool! Thanks for sharing Matt .

[@carlstanoyevic3070]

That would make a nice step in front of the bumper with diamond plate aluminum nice looking

[@andrewx11]

I have an Adam's driveshaft, it's great. I used the coupon code and saved a ton. I also bought one of the yoke tools and have used it about 6 times or so now. It has been invaluable

[@danfrench5457]

"Rick is getting old!" resembles me. Sucks what 50 does to some of us. Nice drive shafts! Not sure on the bed idea compared to the APOC design concept, but you seem to continue to impress me. Keep the videos coming!

[@jeepdoctv]

I’m getting older but young at heart!!

[@mariotibbrine1]

That is gonna be awsome! I hope you round the rear bottom corners to match the cab that should be awsomeness. The FC is a sweet ride!

[@bulldozer7656]

Great job Matt. It's finally coming to the,almost end! Keep on brother, looking good.

[@lal5555f]

You are making this build look so easy! Great job! I need to enter because i must have this jeep haha

[@robhughes1544]

I have a set of LJ springs setting in the garage, if you decide you need them let me know. I would also leave the extra frame on the rear end, I think it would make a solid base for a custom bumper.

[@willb3018]

You are 100% correct about the rounded bed corners looking better than factory. I always thought the FC Jeeps looked odd with the factory bed. All those birds reminded me of the old Hitchcock movie. 😱

[@kstricl]

Custom bedsides incoming. Looks like they'll just be longer than yah thought originally. If Ian can do it over on his MT show, I'm sure you can too.

[@BourneAccident]

HEY MATT - Love that JEEP plate.

[@imgettinby]

looks good sitting up where it is right now

[@brandad101]

That jeep looks great already. Excellent work as always Matt. I can't wait until it's finished so I can win it! 🙌

[@wyattoneable]

Outstanding work Matt.

[@sixtyfiveford]

Love it! Looks great!

[@fredmonroe6042]

Looks great.

[@MrJamesLuz]

The rear has a cross member where the TJ frame ends and the body mounts are on the “extra” cross member added to the rear for the LJ. So it does fit, and I like it. You can cut the extra frame off OR make a custom rear bumper.

[@crayfishroll]

It's looking good and I love the TJ bed ok the back ....even if it's only a few feet of it so far

[@daveyoung465]

You'll have to upgrade hinges or tire carrier for full size spare. They are weak. Well unless you mount it in the bed

[@1911USA]

That Jeep is going to be Bleepin Awesome !!

[@wrenegadeoffroad1400]

it was nice running into you in Moab can’t wait to meet up with you again in Tennessee for the Smoky mountain jeep invasion.

[@madjeepernh6834]

Ive always wanted an FC!!! had to join!!! Just install the OG bed brother!! she'll look great!!

[@matty86suk]

Totally radical!!

[@messix7768]

lj frame is longer behind the rear wheel. there is a body mount just behind the rear axle. you had me chuckling about the brain fart of LJ to TJ differences.....

[@everythingsucks6086]

What a gorgeous build Matt! I gotta enter to win this! BTW, my birthday is September 24th, just so you know! 😆

[@graystone3048]

The Lj would have been soooooo much better. I like the idea of using a tub just used the wrong one imho. Otherwise it’s looking killer man! Can’t wait to see it done!!

[@robbanks7393]

I too like the TJ bed. I’m sure you have already thought of the CJ tailgate with the TJ.

[@leonkane8240]

Love this project!!!

[@willierule3744]

That's going to look awesome that fits perfect

[@monkeymachinerides]

Use that rear bumper to slide a rear bar over it would be strong as hell

[@davidmcpherson9260]

Maybe section a pick up truck bed to fit the space and weld it in?

[@jimmccabe801]

Looking good.

[@duncanmacintyre2391]

Looks so good

[@williamwilde9867]

The tj rear end is a. Awesome idea

[@jimforsyth2.]

I run chains from the yoke to the springs or frame

[@EverythingOutdoors]

Pretty sweet

[@willymccoy3427]

The LJ is also longer in front of the rear wheel wells.

[@jonstrande2074]

That extra bit could be made into a bumper/ tire hanger or whatnot.

[@jameshall4385]

The tub looks good. I think it will need some lift blocks to get it even

[@Nickwillfixit]

Was hoping to see the cab fitted for good if you use the by now, if using that and the back is not wide enough do step side fenders sort of dually style would suit it as per the rendering of this FC.

[@alyouresocool]

If the bed has to come up a few inches anyway, you can offset the mounting points with some box steel cut at an angle. ASCII Art: \ \ One bolt from the bed down into the top of the mount, and then another bolt from the bottom of the mount to the frame. Not ideal, but all your other mounts will be normal.

[@micks9580]

Love it.

[@markkennedy4055]

I have a Good 1991 Wrangler in my garage here in Pennsylvania.

[@robbanks7393]

Yes. 4” LJ stretch equals same departure angle as a TJ

[@JoshuaBoldt]

wow that drive shaft is a brute

[@powers2440]

looks good, it is going to be an experience wheeling at that height. Interested in what kind of bed weights you could use.

[@DirtyDiezel]

Just move the fender flare forward to make it centered

[@jameswriston6952]

My jeep is starting to look good! But I'm happy with a flatbed. You dont need to make a tub.

[@jakemortensen]

Love it!

[@ujjc001]

It looks pretty awesome but the rear with the tub on seems so short compared to the super tall front... I hope that gets worked out... :) it's awesome either way!!!

[@gwood69]

I could also imagine it with a jeepster rear for some reason lol you shoul do the tailgate swap from the old J10s that everyone does with the tjs Is it a j10 or cj tailgate? Anyways you know what I’m talking bout Lookin sweet Matt! I’m visiting Tennessee in may and hopefully bringin the jeep and want to atleast hit one trail while on vacation out there given my new beadlocks show up to the house before then I know you’re a busy guy but would love to hit some trails with y’all!!! Or you could suggest some semi difficult trails I could do by my self and still drive home back to Virginia

[@someoneoutthere1866]

Should have done a CJ rear with a fold down tail gate..

[@Thejeepcalledyeti]

Happy Easter!!

[@jakeofallterrains9048]

M715 bed for the win.

[@chadalcock7275]

I have a full set of stock TJ springs if your interested. I'm in Oregon, so it would have to be shipped.

[@LadyBoogScoots]

I know you put an xj box into that. Where do you get xj steering boxes that aren't sloppier than pudding? I've been through 3 remans now

[@shaunkrebsbach9821]

i like the jeep make the rear frame area / a bumper / step

[@87fubar]

wonder how a mid flatbed with removable or fold down sides would look

This is going to be such a sweet ride!!!

[@tomrohlfs5538]

LOVE ADAMS DRIVELINE. WEAR THEIR TSHIRT WITH PRIDE :D

[@jimruddell9491]

Yes the LJ and TJ springs are different.

[@jimruddell9491]

That said, the entire vehicle is different so it might not matter, you may need to experiment.

[@codyerickson4109]

I have some stock tj suspension I have collecting dust.

[@daveyoung465]

OE rear springs will be kinda weak once its completed and loaded with gear, won't they?

[@daveyoung465]

Lj body is 15 inches longer than a tj. 11 inches is behind the rear seats

[@Kingston100LC]

Yeah they were shooting "fireworks" :)

[@tomrohlfs5538]

An lj cab was stretched in the back and in the middle.

[@hubiecasteel7045]

Looked like you got something dead near by... That FC is gonna look good with that lJ rear on it...

[@jaydawg3303]

I have stock lj springs. They had 160k on them when I put my lift on and I’m in northern Virginia. Let me know if I can get them to you somehow

[@uriahschoenwald4027]

How do these not face plant on hard braking?

[@Tsilsby]

put some steel plate on top of the rear bumpers or just turn it into a bleepin jeepin offroad bumper. diy...

[@daveyoung465]

I might just make this my new daily

[@endlesssummer3406]

I got one of those jeeps sitting in field. Lol

[@nemesis851_]

Waiting for the cliff hangar HOW DO THEY GET IT OUT THE GARAGE DOOR?

[@theezeelife292]

9:54 It amazes me how many Jeep guys still don't know how to pronounce, "Willys."

[@evloftis4143]

just became a youtube member

[@benshore7357]

It looked like you were going to turn it into a 6 wheel🛻🛻🛻

[@ingold84]

Does anyone know why my jeep TJ makes a sound like it has a rock in the tire (it does not), but only up until 10 miles an hour and then it stops making the sound. It sounds like it was coming from the front passenger side. It does not make the sound if I jack up that tire and spin it by hand. Does it going forward or backward, whether I’m in neutral or drive. If the tires are spinning at 10 miles an hour or less it makes a clicking/ticking sound.

[@jamesvanhoose3132]

How many times can I enter to win?

[@ilikspltv8377]

What up man ? If y needing a another half of a tj I have one laying around . Let john Moore know he can get a hold of me