The JSRP Parts Truck Build Part 5 The Fuel Rail, Injectors and Fuel Lines

Part 5 in the series, we address the fuel rail, injectors and the rest of the fuel lines.

[@leemac270]

GOOD CONTENT KEEP THAT UP.

[@iamgoat3035]

hey does anyone know where other end of that hose that goes into back of vortec 5.3 intake goes? i was intalling a new de-pinned harness and just popped one end in back out to do grnd and 2 sensors back there and when i was done somehow both ends were loose and end of the day i couldnt find where it went back in?

[@rolandomacias4841]

everything is well thought

[@WD-sr8qz]

Absolutely love the videos, but it's really hard to concentrate on what you're saying with the music in the background.

[@malikudeen6747]

What size is the fuel rail adapter for the in feed and return line ?

[@valterponte]

Hi can yo please explain how to find out if its a big or small rod? thank you

[@PROJustinSane]

before 05 small rod. after 05 big rod. in 04 could be either and have to look at them. there is a video in my channel that shows you the difference.

[@valterponte]

Thank you

[@ls4.8frank]

So I'm guessing your website is no longer up or you are no longer in business?

[@terrancedaves7514]

so does the 13 mm exhaust bolt and 13 mm vally cover bolt trick still work?.... because a friend of mine has a motor with both 13 mm bolts but he says its a 2003-2004

[@PROJustinSane]

it's not a set in stone trick. it's accurate most the time but there are rare times its not. I personally have never seen it not work. but have heard rumors of others

[@terrancedaves7514]

Ok thank you

[@terrancedaves7514]

What bolts did your truck have if you don't mind me asking.....? And I definitely need to set up a phone consultation with you because I'm building a 5.3 right now and I am kind of stuck on certain things where to invest and where not to

[@PROJustinSane]

+Terrance Daves it had mix. and go to www.jsracingproducts.net and set one up on the consultation page.

[@boosiejr90]

What iat sensor are you using??

[@Jefferson66019]

Just got the Fuel Rails for our 1962 1/2 Ton Chevy C10/20 3/4 ton Frame with 1/2 ton front and rear suspension sporting a Flat bed now. I just dont want to use soo many adapters and I dislike those clips GM put on these engines. Just ordered new Injectors DELPHI Stock. Where did you get that smooth intake ? looks Alot better than the Stock one I would like to use it on our rig. Learning a little more each day with these videos old dogs learning new tricks can be dangerous...LOL Any way if you remember where you got it let me know what I should be looking for Its going to be all stock except for this stuff I want to make it look as clean as possible we Already took off the monster harness in favor of A Kit for the EFI.

[@ls4.8frank]

You can shave your intake just like this one. There are tons of videos showing how to do it, but just find the one that you feel suits you best. LS INTAKE SHAVE

[@Rattle_canned_restorations]

is this the 5.3 or the 6.0????

[@leemac270]

backround music is intersting. lol

[@PROJustinSane]

I like to listen to mozart when I fabricate.

[@heathroi]

+Justin Sane or some Wagner