The Largest Engine Possible (twincharged)

[@automotiveflux]

Will that fit in my Honda?

[@hamburgerhamburgerv2]

With some light modding, yes

[@yurei3714]

it will become the Honda

[@charlieandersson4069]

cut compression to lowest point 6.0:1 or 7.0:1 and more fuel will help cool the engine and run 110 oktane gasoline

[@dmitri546]

We'll make it fit.

[@MarkoDash]

it might fit in a Porsche... if that Porsche is a VK45.01

[@_underscore_2381]

19:34 it didnt blew up, it ran out of gas!!! The engine did not blew up even once, it just ran out of gas!

[@Drosba]

I know what's wrong with it. It ain't got no gas in it!

[@supertornadogun1690]

This thing actually burns through gas faster than a drag engine lol

[@AverageGamer2010]

​@@Drosba beat me to it

[@AverageGamer2010]

​@@supertornadogun1690 I mean what do you expect for something with 8 times the displacement?

[@911NinjaCat]

​@@Drosba about the only time that that was actually the case across automotive youtube fails/memes

[@meehdrescher]

your engine did not blow up, you ran out of fuel lol

[@dkrk5595]

This thing makes fuel dissapear

[@TheLtVoss]

I have made a 1l 4banger on 5,1bar boost/ 97.xxx psi the fuel flow is max 0.3 L/s even with a moded fuel tank of 120L I get only 36km out of it 😅

[@CornBread-i9b]

thats what im saying

[@piscessoedroen]

He made a 10 second engine as in it guzzles the entire tank in 10s

[@Ron-l9d]

@@piscessoedroen Physics is a bitch.

[@Sithhy]

18:38 - I have not seen the "Cylinder walls melted" warning in such a long time

[@AkiUwUx3]

ive seen it quite a bit while tuning my Barstow to go to 5.4 seconds in the quarter mile the easiest way to get it is to bind the activate nitro button and spray nitro while cranking the engine to start it with the nitro shot maxed out edit: course im using an xtreme adjustable shot size to 5000 kw, from meo's nitrous mod

[@Payday5]

if you watch grogtv you'll see that quite often lmao

[@yurro2563]

watch grogtv

[@LastGoatKnight]

POV: you used aluminium powder to increase the octane of the volatile fuel:

[@ValStinks]

if you werent running nitro methane you could actually play with the turbos, nitro just exponentially raises compression

[@boostaddict_]

on top of a 14.3:1 compression ratio yeah, cylinder pressures were RIDICULOUS edit: 12.2:1, still high

[@jwalster9412]

Also, compound turbos are kinda broken and make more empower if you go lower cam profile.

[@MuscleCarLover]

And he'd have fuel for more than 15 seconds

[@johnnygeorgopoulos4072]

He clearly doesn't know what he's doing with engines, tuning, fuel, metallurgy, ECT... this has been a painful watch, and I'm less than 6 minutes in still 😅

[@ValStinks]

@@johnnygeorgopoulos4072 he's been at this for years and will never learn but that's okay

[@ImInLoveWithBulla]

My dad was a merchant engineer. He worked on engines where it took two people on a 10 foot rod to un-torque a head bolt. You had to climb down a flight of stairs to get to the crank. Any amount of horsepower is possible.

[@THESLlCK]

my uncle used to do that until a crew in south carolina kept trying to drop i-beams on his crews head

[@Armi1P]

17:57 "The gearing is lazy" says he as traction control fights for its life like never before.

[@the_real_Kurt_Yarish]

It seems like you don't understand how to manually rev the engine with the newer test controls, you have to increase both the throttle AND the RPM sliders to rev the engine. They split the function into two separate halves, you were literally just opening the throttle with the engine still spinning only at idle speeds. Which is why it sounded like a jet engine, you weren't hearing the actual engine reving, just the chargers spooling.

[@midly]

this has been a feature for a long time and looking at his experience in automation im 99% sure he knows this

[@netsurferx1]

Three words: Quad. Turbo. Bugo. 'Nuff said.

[@averytiredman4857]

18:28 was the smoothest drift an automatic bus could ever do

[@johnnycruiser2846]

The long wheelbase, dualies at the back and 75 % of the weight behind the rear axle, increasing the rotational inertia, helps, i think.

[@cyborggunslinger4230]

Call this engine the magician because it makes fuel disappear

[@TheRealNeoFrancois]

your engine didnt die tho,your just running out of fuel that fast

[@mcezlla8192]

Turn the compression ratio down when you add the boost!

[@GewelReal]

Automation needs an ECU update next. Gimme them fuel maps

[@PSboy_VII]

they actually updated it a bit i think, you can now adjust the ratio (to a degree), the [some symbol] area, as well as the timing

[@SHE3PY_]

Hear me out : will it fit in a miata

[@georgevasilopoulos5359]

You mean the miata will fit in the engine

[@ThatFL232]

Not in, maybe on 😂

[@gabs69690]

yeah if you stretch the hood by 50km then maybe

[@Loloskye1]

The engine is bigger than the entire miata.

[@Prometheus4363]

Anything is possible with a welder and sheet metal 😂

[@endorsti7137]

17:41 from what I have gathered there is an issue with supercharged automation vehicles. Even reasonable builds overheat and blow the piston rings.

[@kalle5548]

The issue is there on compound sequential turbos as well, probably an issues with high boost low rpm scenarios

[@SullyDocks]

Fella running 12.8:1 on a twin charged quad turbo. Surprised he didnt play with compression ratio more

[@sebastiancalderonpacheco8218]

Is that too high?

[@SullyDocks]

@sebastiancalderonpacheco8218 its a high ratio for sure, not sure how well the game captures the reality of it. Neither do i fully understand nitrometh fuel

[@boostaddict_]

seeing you leave the compression ratio at 12.2:1 bothers me, lowering compression ratio will help make it WAY more reliable, just a lot less efficient and powerful lol

[@-aid4084]

Actually, there's a sweet spot with compression ratio, too high and it makes less power, sometimes more fuel economy and raising the knock risk. Less compression, less knock risk and less fuel economy, potentially more power because less energy is spent compressing mixture during exhaust and compression stroke than is lost from lowering the compression.

[@crackedemerald4930]

lowering compression would probably be the easiest way to nerf that engine enough that it's useful

[@MorganHarper87]

21:00 Shifts up from 1st to 4th gear. Near ZERO dip in revs.

[@skydewz]

That engine in the back of the bus is one of the most comical things i've seen in automation

[@afiqueshafon343]

Better put bunch of street plates under it for any accidental wheelie

[@Blurgamer17]

12:46 ...go round and round? 😅 12:50 It was already in your head, too. 😂

[@sgeb4996]

Every single push on the gas pedal is visible on the fuel gauge on the right.

[@dmitri546]

I don't know how it was even RUNNING. The thing MELTED THE CYLINDER WALLS AND WAS STILL CHURNING!!!

[@pearsonmacdonald3506]

1:50 and you know what else is massive

[@Danieljeleniekjebany007]

Low taper fade

[@sabastiangipson8163]

The fact that that engine was making ten thousand three hundred horsepower and eleven thousand four hundred foot pounds of torque is ridiculous

[@rawhidelamp]

Why did you write out “ten thousand three hundred horsepower and eleven thousand four hundred foot pounds of torque” instead of “10,300 horsepower and 11,400 foot pounds of torque”

[@sabastiangipson8163]

@rawhidelamp it's just how my phone did it when I spoke to it

[@doomakarn]

Increasing the offset of the wheels allows you to increase the tire width.

[@startingbark0356]

The scary part is that that thing is more then double the size as an rolls Royce Merlin engine And almost double the size as an DB603 (In displacement)

[@NikoX12377]

1:51 LOWWWW TAPERRRR FADEEEE

[@CupOf_T]

Imagine your enige blows up, piston rods fail, cylinder heads fail, all cause you turned it over more than 6 times a minute. *update* WTF IS THAT MATH IT’S 30 TIMES DW MY BRAIN IS FINE

[@bacon.cheesecake]

Now this is some classic AutomotiveFlux

[@mathias6369]

in this version of the game, when exporting to beamng you get way too little cooling, thats why it overheats, you can edit the files to fix that

[@Pasquy_07]

How much does your car consume? Me: yes! 😂😂😂 It litterally drinks the fuel

[@yurei3714]

Speed 2: Twincharged

[@rjburger27]

The biggest one piston engine possible. In an economy car

[@automotiveflux]

Unfortunately it starts at 3 cylinders

[@21Slvmp.189]

1:52 you know what else is massive

[@Matrix_TM.]

13:36 if you wanted bigger tires you could've used advanced trim settings in the trim body sellection, it's a red gear icon just above the left pointing arrow in that section 😂

[@flexibellflex5700]

1:58 u know what else is massive?

[@2ajayy]

1:50 you wanna know what else is MASSIVE…

[@saurocantho6195]

Now make the smallest v16 with the biggest supercharger and turbos

[@Deadsphere]

This whole thing would be more fun if Camshaft didn't hate fun and allowed us to just... make monstorous powerbuilds with indestructible parts.

[@nachtstiel1]

The sliding is due to the engine nodes being way below the actual engine. you'll have to move them up so the tires bear the load lol

[@slightlyserioussam5136]

They're gonna need to add Vibranium as a building material to support these mega engines.

[@ezragonzales687]

I hope they add inline 8, flat 8 and 12, v4, v2, single cylinders, and flatheads soon. It would also be cool to change crank degree too.

[@LeSmuh]

18:40 "Cylinder walls melted" 💀💀💀

[@dosh8276]

This thing just INHALES through fuel.

[@mentecreadorabeats7126]

Marlin was the name of the Air Fighter engines right?

[@bobertdazukin]

I want a shirt that says "the wheels on the bus don't just go round and around. They work"

[@holy_knight]

17 thousand dinosaurs per minute More or less

[@RichardEllis907]

You can see the damn fuel level go down 😭

[@agusega4261]

With all that torque you might as well stop Earth rotating 😂

[@ThatGuyinAnotherHatch]

Turbos are killing it. I made over 12k hp and 11300lbs torque with just a super charger.

[@NirvanTMClips]

1:51 m- massive..?

[@ram_stick_samurai]

grog tv bout to make the bigger turbo engine he already made.

[@1mariomaniac]

this engine has more displacement than most fuel tanks lmao.

[@itsyaboikirbo]

compressed gas would probably be a better choice of fuel instead of nm

[@r10101]

Absolutely, engines that would be close to this that do exist on cruise ships use either diesel or compressed gas. Would have solved a lot of the excessive torque problems too.

[@rocket2739]

12:48 THE WHEELS ON THE BUS GO ROUND AND ROUND ROUND AND ROUND, ROUND AND ROUND! (Yes I have Venjent's tune in my head now, thank you)

[@Rey-vm9it]

revs up engine once... "cylinder walls melted" 💀

[@rocket2739]

Now we need to be able to export our engines to Sprocket, because this would DEFINITELY be enough to make a Maus go 40 kph

[@Wreckedftfoxy]

autoflux u did basically what i realized within 5 seconds of tuning with the bottom end i was like oh forged heavy conrods and forged heavy pistons the way to go for 10k+ hp

[@SoreTv]

I wish there was a diesel equivalent to this game.

[@TouringCarsAndStuff]

We now need to do a drag tournament again

[@multidimensionalhypercube]

I've found with that bus model the engine tends to hang too low at the back which is what makes it feel like ice, idk a solution for it as of yet, but otherwise cylinders melting and all an awesome engine

[@explosivegrand2937]

“Its very slow” 0-100 in less than 2 sec

[@ChromaticSchnitzel]

This thing is gorgeous, idk why but I love rediculous buses

[@a_catfish5180]

It obviously depends on what you’re trying to do but the low friction cast pistons aren’t actually the best when it comes to making big power or rpm

[@KrzychuAleksina]

Sir, stuff that into a miata.

[@FumbleSquid]

Do you think you can make a custom radiator or alter the stats so it wont overheat?

[@devinhawley350]

Intake air speeds achieving escape velocity. You need the fuel flow of 9 realms to feed it 😂

[@scottmorton8727]

I mean, if you can find a panther to put it in, i bet it would definitely fit in that😂

[@BufferThunder]

Can it fit in a miata tho?

[@Kat-Kobold]

bro is causing another gas crisis

[@davidaugustofc2574]

You should name this engine Saturn V, cause it requires most of the vehicle to be a gas tank.

[@wtls000]

I can't be the only one who sat there begging you to change gears

[@automotiveflux]

I am also begging

[@Mikelectric]

if you reduce the stroke but increase the bore, you should make less torque, increase rpm, and make mmoore power?

[@wolfyhalfmoon819]

Wow the engine weights around 2,400 ish lbs (1,200 k)😮

[@Forzaa5824]

How’d you get the new forced induction update to appear in game??? The update was released but absolutely nothing is different when it comes to the options of forced induction in Automation. I’ve been trying to figure it out for a couple days now.

[@abdullahajeebi]

You open the games properties, tgen you head to "Betas," you will find a new beta that appeared there.

[@Forzaa5824]

@ i gotta take it from another file and put it into another file?

[@Sithhy]

@@Forzaa5824 When on Steam, right click on the game in your game list, select Properties, go into Beta tab then just select the beta version

[@abdullahajeebi]

@@Forzaa5824 No, it's in Steam.

[@isaactrockman4417]

No its just in the menus

[@carltonleboss]

You've obviously got to put this in a Bugo somehow.

[@TheRealHypervizor]

Never fully blew up but also you layin into the rev limiter cut power as the cylinder walls kept failing due to coolant issue. Short shifting it might have been able to see what it can do in a later taller gear.

[@maxtsiavos1874]

how the hell do you get a supercharger in automation?

[@BevinEG]

The wheels on the bus do what?!

[@vulcandawg7623]

bro was drifting an frta bus lol

[@diegootero1686]

I still haven't managed to make a twincharged engine optimized for power that doesn't melt the walls cylinder walls. Pretty sure something's wrong with the temperature simulation.

[@maldyfish]

i made this myself when the update first came out, it goes through a full fuel tank in a few minutes and the internal engine temperatures reach over 5000*c

[@Ron-l9d]

I think some top fuel dragsters can make in the thousands of HP. And using only 8 cylinders. Thing is physics dictates they can only last for a mile or two and burn gallons of fuel per minute. So it's really not good for anything other then living 1/4 mile at a time. Granted that 3 second ish 300mph 1/4 mile must be quite a blast to experience.

[@tranarchist6335]

I wish the sandbox mode had a way to make indestructible engines

[@ragingfred]

How did you resist the temptation to drag race this on the dragstrip?

[@automotiveflux]

Ran out of time, but seems like it would be out of fuel before the end

[@hrishikeshaggrawal]

​@@automotivefluxno it'll take a few runs before that

[@iluvcarswithighspeed]

gotta make something with the sequential turbos

[@36thgallardo]

What if you did a version of this engine but used mods and/or editing to force the engine to be 100% reliable? If you had parts made of adamantium what would the power get to?

[@Ron-l9d]

Bugatti managed to make a twin/quad turbo V-16. Granted it cost more then an average house just to do standard maintenance is is proven to work. From what I gather they somehow fused two VW V-8's together. IIRC it makes over 1000hp and a top speed like approaching 300mph. See no reason to make it any larger lol.

[@Ron-l9d]

Also to note. They run out of fuel very quickly when driving it full bore for any length of time.. like minutes....

[@Ron-l9d]

Physics always physics.

[@ado1541]

I don’t have superchargers in my game? Is there a pre release version somewhere?

[@zbot2123]

You have to activate the open beta by selecting it in steam versions

[@goldo0012]

Technically we can build bigger engines irl

[@jonhasfun4481]

The fuel dropped to half in only one curve 😮

[@kartingbeast93]

supersonic car challenge next?

[@vrusostalstreak6557]

If you turn off the ESC it might actually go into other gears

[@m4d_mark_xtr3me79]

Cast iorn or steel block would've been stronger than magnesium. That's what you want with that size of engine

[@CarlMarx]

This engine could probably run on crude oil

[@IvoKintobor]

no drag strip?

[@treysmith944]

Next time turn the boost down on the super charger and more boost to turbos turbos make power high into the rpm and less torque might be able to make it make more

[@Dr.Mcstaby]

I made one of these monster V16's but I could only get it to fit into a Bus MOD body (it does +240mph) and it makes 6700hp will all green's on engine stress's , I wish thy would add more engine materials that can hold up to power or let up make the engines bigger/ have like W16's or something Also Ive never seen the other turbo options before

[@zbot2123]

75L is practically a ship engine 😰

[@ebrgenetik1306]

Will fit in a miot